Sound not working? - MDA II, XDA II, 2060 General

Hello!
I have a Qtek 2020, and recently the sound stopped working... No notifications, no mp3, can't hear the person talking on the phone... (but they can hear me)... Nothing coming from the speaker at all.
However everything works when I connect the earphone that came with it.. I'm on WM6 23045 by zjw831 WWE by the way. (by far the fastest ROM I've found)
Is the speaker dead, or could it be a software/ROM problem? Thanks! Awesome work on the ROMS here, by the way!

would read these 2 threads
http://forum.xda-developers.com/showthread.php?t=267647&highlight=speaker
http://forum.xda-developers.com/showthread.php?t=225372

Related

sound works with media player but not with phone function !

Hi,
When making calls I can't hear any sound at all....neither can the other person.
I can record and playback using the dictaphone function with no problems. I can also play back all sound using windows media player. and all other sounds within the XDA such as volume increase/decrease, beeps etc....
But when using the phone I can't hear anything :? ...does the XDAII have one speaker or two ? any help on this would be greatly appreciated...
Also holding down the green phone key does not activate the speakerphone function ?
BTW I have already done hard and soft resets
ROM VERSION 1.60.00WWE
ROM DATE: 12/03/03
Radio version 1.10.00
Protocol version 1337.18
ExtROM version 1.60.50
Regards
b11gy
Does the phone work with the headset.? There is only one speaker as far as I know but 2 settings for phone/pda.
yes the phone works with the wired and bluetooth head set !!
Is this something that just started happening, or has it done it since a ROM upgrade?
I have the same problem appart from I get no sound from the wired heatset either. Not tried bluetooth as i dont have a bluetooth headset.
How long are you holding down the button? You hold it down after dialling the number for about 3-4 seconds, you should then get a popup informing you speakerphone is active.
No volume on unit
I have the same problem and it comes and goes. Anyone know how to fix this bug entirely?
No sound during call, speakerphone works and headset works.
I have the same problem:
No sound during call, however speakerphone works and headset works well. There is no sound only when I use it as regular phone. Person on the other line can hear me well all the time.
When I raise volume during call I can hear peices of the person on the other line, at the same time as phone beeps that it reached sound maximum.
This happened after phone was dropped and it hard reset itself automatically.
I am trying to reboot it now with different ROM.
Headset jack hasnothing to do with it, since speakerphone works well.
If anybody has any idea please share.
Thanks
xda 2 sound problem
Unfortunatley I have the same problem ;/
Identical as b11gy
Could anyone help us?
After rom upgrade the problem is identical
Hey.. did it happen after unlocking the phone?
I've got the same problem, Sound and mic work perfectly until I call somebody, I've got a wired headset, the speakers work during a call, but the mic doesn't.
I've just updated the phone from wm3 to wm5, but I had the problem before I updated, and i'n still having it. Does somebody have a solution for this problem?
The problem is not in Windows, because I updated windows from 3 to 5, it's not a hardware problem, because the notes-function work fine.
in an other topic I read some people think the phone is in headset mode, but if that is the case, mediaplayer etc. would only play via the headset.
Does nobody have an idea where to look?
I cant recall any more what was exact situation but as far as I remember I had same problem on 1010. Please check that part of the forum (wallaby), maybe it help.
A lot of pople had that with 1010, as far as I remember somehow we fonund that solution that worked for most of the people was to leave qtek on a dry place for a day and then charge it. That was the way I solved the problem second time and first time I patched it and it started to work (win 2003).
Heres the thread http://forum.xda-developers.com/showthread.php?t=222433 maybe it help someone.

Big problem: noise in speaker when calling/receiving calls

Hi there,
i'm stuck now with a very strange problem.
I was playing with the A2DP patch when i discovered that my prophet is making noise in the built in speaker when i'm receiveing or making calls.
After 2 hard resets (the Clean Data and the Camera/Comm buttons + reset methods), it's still the same. I can't use the phone as a phone!
Also same with headphones. It sounds like the volume is way too high. Almost unintelligible.
Only in Bluetooth it works correctly.
Any ideas?
It is a O2 XDA flashed with French QTEK S200 ROM, so of course waranty is gone
Help help help
Hi there.
Nobody had the same issue with his Prophet?
After some investigation, i came up with the idea that it was because i was using Wireless Stereo with an A2DP device, but it suddenly came back, and even with Bluetooth disables/devices deleted/unregistered from the phone, it's still the same.
I don't know what to do. I'm forced to use my Bluetooth headset to use my phone :?
I didn't try yet Hard Resetting my device, but the other day, when i wrote the previous post, it didn't help.
So, You, who are reading this, please give me some advices
I'm lost.
i have the problem in the other one, in the normal use the sound is sooooooo extrem loud. in the bluetooth mode works it perfekt.
nighty
Well, it depends how you see (hear) the issue.
I call this noise, but in fact it seems that the sound is pushed to the max. I can hardly understand the words people say to me through the built in speaker.
Maybe we have the same issue, but i call it "noise" and you say "extremely loud".
Do i understand well that you're living with this?
Did you also played with A2DP patch? Or is the origin of your issue different?
Personnally, i'd like to find a solution.
yes i played with A2DP patch and i wont life with this probelm.... i send mails to www.qtek.ch, www.swisscom.ch, www.daanguard.ch, www.teleservice.com and a lot of other Qtek supporters.....
in this moment i use only bluetooth for all calls. but this ist not really a final solution.
nighty
Good,
i don't feel alone now
If one of them answers you, please let us know on this thread.
Maybe there are also other people with same or similar issue that are too shy to say it here
They'll like also to know how to fix.
I can't believe we're just 2 with this issue :roll:
Nightly,
did you have an answer for all the emails you've sent?
I'm planning to flash an O2 ROM back to the XDA Neo and sent it to repair, but if you've found the solution, i'd be happy to read it before i go to Germany.
nighty said:
yes i played with A2DP patch and i wont life with this probelm.... i send mails to www.qtek.ch, www.swisscom.ch, www.daanguard.ch, www.teleservice.com and a lot of other Qtek supporters.....
in this moment i use only bluetooth for all calls. but this ist not really a final solution.
nighty
Click to expand...
Click to collapse
Hey, i was wondering did u ever find a solution for this problem as i have not 1 but 2 prophets with this problem thx

Sound problem

I own an TyTN with Windows 6 (HTC official) installed some months aga and recently I have problems with the speaker.
I can not hear ringtones, music, Tomtom voice, alarms, etc. but I can hear a phone conversation when somebody call me.
I've revised the 'Configuration > Sounds and Notifications' and I have the sounds activated. I did a hard reset and before to touch or install nothing I've checked with no succes.
Could somebody help me please?
Montybcn said:
I own an TyTN with Windows 6 (HTC official) installed some months aga and recently I have problems with the speaker.
I can not hear ringtones, music, Tomtom voice, alarms, etc. but I can hear a phone conversation when somebody call me.
I've revised the 'Configuration > Sounds and Notifications' and I have the sounds activated. I did a hard reset and before to touch or install nothing I've checked with no succes.
Could somebody help me please?
Click to expand...
Click to collapse
Sounds like the loudspeaker is dead. Just double check in the volume control to see if you have the slider set higher than zero - but it may well be a hardware issue.
Could well be the rear speaker connection has slipped off - not uncommon and an easy fix - see here (oh and a search would have produced several results for this problem):
http://forum.xda-developers.com/showpost.php?p=1376254&postcount=2
Mike
Thanks a lot!!
It seems it will be a hardware problem
I've seen all the related threats before but I was hoping that somebody could give me a clue to fix some software bug.
Mike, I've been last summer in Scotland (and I visited Aberdeen too) It is a wonderfull land. I was surprised and delighted with the beautifull landscapes.
Thanks and regards,
Jordi (from Barcelona)
my sound had turned off today too.. ive tried to get inside my hermes and the connector was disconnected from themainboard (my tytn was droped down seriosuly many times ) after conecting everything is ok it takes around 3 minutes to fix that
wish u luck
good post. this seems to be what is wrong w/ mines. no sound @ all. but i can have a phone convo. and phone vibes. just happen out the blue last nite
Please help.
I have an issue with people can not hear me ... If I plug in a headset, and talk through a plugged in Mic then they can hear me. I can hear them very well.
Any help is appreciated.
i have Abusalza's RBSN.V27 ROM/ Radio 1.47.30.10, protocol VER 32.80.7020.20H

A Strange Audio problem

Hi, I cannot hear any sound during an out going call(O2 Xda Atom). No ring back, no voice after connect, tried earphones - no luck, tried the switch on the earphone jack - no luck, checked for software clashes, cold reboot, re-flash and couple of ROMs... the other party during a call hears hissing noise. In coming call is fine, both can hear well.
The speakers and mic are good. I can play music, videos, ringtone.. no problem. Also tried audio recording, no problems - the mic is fine. Any clue what is going on? Plz help.
Jole
Jole said:
Hi, I cannot hear any sound during an out going call(O2 Xda Atom). No ring back, no voice after connect, tried earphones - no luck, tried the switch on the earphone jack - no luck, checked for software clashes, cold reboot, re-flash and couple of ROMs... the other party during a call hears hissing noise. In coming call is fine, both can hear well.
The speakers and mic are good. I can play music, videos, ringtone.. no problem. Also tried audio recording, no problems - the mic is fine. Any clue what is going on? Plz help.
Jole
Click to expand...
Click to collapse
Basically you can flash back to original WM5.O to confirm if it is ROM problem. For your case, I strongly believe it is not a hardware problem
Thanks for the response Sono. But the phone was working fine with wm6, at least for an year. Now I've tried 6, 6.1 and 6.5. I dont have a WM5 ROM back up, will try to get one tomorrow.
Jole.
speaker supplier in the phil
hi mga kabayan..Do you have any info about the supplier of speaker for atom life here in the Philippines? coz both speaker of my atom were busted already. How much?..tnx
sonofwind2008 said:
Basically you can flash back to original WM5.O to confirm if it is ROM problem. For your case, I strongly believe it is not a hardware problem
Click to expand...
Click to collapse
Tried flashing the original WM5 too, but no fix. I used to format file sysytem and install radio on my Tornado. Is there something similiar for Atom? Can I update GSM manually? Any advice?
No ring back, no voice after connect, tried earphones
Click to expand...
Click to collapse
Okay theres a number of things you can try to help diagnose it. Do this all on a clean install of WM6 or 6.5.. Preferably on a ROM that hasnt had any reported issues.
1. The outgoing call gives the receiver static.. correct? is it to any number or just specific numbers?
2. Do you have a bluetooth headset around that you can try? If so then pair it up and see if it does the job, that will prove that its a hardware problem.
3. Try a different dialer or the stock dialer.
Thanks Aegishua for the response, I flashed back to a wm6 ROM that was working fine for over an year. This is what I observed:
1. Calls to two GSM and one land-line gave the same results. The phone is silent, the other party hears a loud hissing and a high pitch tone, not so loud, almost like feed back noise. No change when I mute/unmute, switch on/off spkr phone. when I select 'hold' the noise is replaced with a hold music from the network. In-call recording captures my voice thru the mic.
2. I could not try a BT headset, hope to get one tomorrow.
3. At least four different dialers tried incl original wm5 dialer, wizard dialer- retouched, Yota etc. Each of them returned the same results.
Please advise.
Ok, I got a BT headset, but the result is same as before. That is, out going call no audio at all, in coming calls ok. Does it mean the GSM module is bad? Is there a solution, other than replacing the entire ckt board?
Thanks, Jole.
bump..have you solved this kabayan? same problem encountered
atom life call problem fixed!
just got outgoing and incoming call working!
thanks to insomnia for sharing his procedure. i also want it to share for those who are experiencing same problem.
originally from this thread
insomia said:
Mga kabayan, im not sure if this will work for you.
i assume youre using globe sim card and i experienced it before when i first flashed my atom life (with official rom) to a cooked 6.5. (talagang my issue kc ang atom life s globe kaya fix nila s official upgrade nila.)
so i upgrade it 1st with an official upgade rom from O2 before i flash it to a cooked 6.5. a long procedure but worthy. Try nyo lng din. hope it will help.
btw, after testing all latest rom... i am still using and preffered our kabayan chef bajok's 23004 release. not much in latest interface but it is stable and free from any bugs.
Click to expand...
Click to collapse
* just download the released official atom life rom upgrade.
* flash your beloved pda
* flash it with your favorite cooked rom!
Jole said:
Hi, I cannot hear any sound during an out going call(O2 Xda Atom). No ring back, no voice after connect, tried earphones - no luck, tried the switch on the earphone jack - no luck, checked for software clashes, cold reboot, re-flash and couple of ROMs... the other party during a call hears hissing noise. In coming call is fine, both can hear well.
The speakers and mic are good. I can play music, videos, ringtone.. no problem. Also tried audio recording, no problems - the mic is fine. Any clue what is going on? Plz help.
Jole
Click to expand...
Click to collapse
try open a radio fm....
if you hear sound....the problem @earphone connector...

suddenly no sound?!?

hi there
i have a Hermes, exactly the T-Mobile version..
anyway it worked fine till one day i got no sound at all, no mp3 no notifications, nothing....
except the boot up sound... checked the forums, seems it's a common problem, and i figured that the rear speaker works (since the boot up sound comes from it), the speaker cable is connected so i have no clue... if it would be broken, than the boot-up sound wouldn't come at all from the rear speaker, riight?
changed like 5-6 ROMs so far, from 6 to 6.5, no changes with sound...
any clue guys what to do?
I'd need to solve this asap...
thx for any solution
can please someone at least confirm me if my rear speaker is dead or not?
cos i hear the boot up sound from it but no other sounds...
please ,its urgent, thx
Well, the first thing that i would consider doing is backup my important data and do a hard reset....why don't you try that too....?
okay
got from ebay a new speaker... changed it and it doesnt work either...
hard reset and changing the ROM (6-7 of them) didn't help...
at beginning the sound could be heard at boot only while playing music, ringing and that stuff was mute... after 2 days the sound at boot disappeared too...
so, does anyone have a solution? when i plug the microUSB to 3.5mm adapter i can hear the sound on my earphones, but there is no sound when played normally on the ppc itself...
can anyone help me to solve this? where could be the problem?
thanks
okay...
going mad really... now i flashed an original AT&T US rom (although i have a tmobile EU) and guess what.... i hear the sound back again, but only at boot up... other sounds in winmo (ring, mp3, music, programs) are dead... can't hear anything although the volume is set at max...
so... i assume this can't be a hardware issue..
before this ATT i changed like 6 more different roms and all with same problems... now i have sound only at bootup... does anyone know where is the problem and a possible solution?
thanks
cmon guys... don't tell me no one has no idea what to do.....
i've been flashing and reflashing the roms but so far i can get only the boot up sound... any other sound is not available.. why? how to repair it?
thx
it's funny to see you can ask sometimes questions no one knows to answer
you've tried it by using the head set...?
whether the results were the same as well (no sound)..?
when using a headset (extUSB) there is sound and everything is normal...
Papcina said:
when using a headset (extUSB) there is sound and everything is normal...
Click to expand...
Click to collapse
you'd better check the speakers on your device , may be the connecting cable is damaged and if necessary you replace ....
I have the same problem here!!!Have you fixed that??Can you suggest me something, please???
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
nonsuchpro said:
Hi all... new here
I also have the same problem on my AT&T 8525. The Telephone speaker works but the phone doesn't ring or give audio notifications any longer. I've done a hard reboot 3 times. Bluetooth audio works fine. But no speakerphone. If anyone has a solution we'd appreciate it!
Thanks!!!
Click to expand...
Click to collapse
you see in the WIKI, because there is described several ways to increase the BT A2DP sound quality and sound notification by Changing the Registry

Categories

Resources