Regaining Root with New SPL - G1 General

I have a quick, simple question that I have tried searching for:
I lost root trying to upgrade to the newest Cyanogen (I think I rebooted when I wasn't supposed to). I am unable to get into fastboot as my computer will not recognize the drivers. I have also lost my recovery image. I have Haykuro's SPL (.005) and wanted to reroot using the DREAIMG RC29 process. My question is: is this possible with the new SPL? Do I have to go back to the HardSPL or can I just downgrade to RC29? I know that I can not change the radio version at this point... I just need to regain root without ADB/Fastboot!
If someone can point me in the right direction or help me out, I would greatly appreciate it.

metasage said:
I have a quick, simple question that I have tried searching for:
I lost root trying to upgrade to the newest Cyanogen (I think I rebooted when I wasn't supposed to). I am unable to get into fastboot as my computer will not recognize the drivers. I have also lost my recovery image. I have Haykuro's SPL (.005) and wanted to reroot using the DREAIMG RC29 process. My question is: is this possible with the new SPL? Do I have to go back to the HardSPL or can I just downgrade to RC29? I know that I can not change the radio version at this point... I just need to regain root without ADB/Fastboot!
If someone can point me in the right direction or help me out, I would greatly appreciate it.
Click to expand...
Click to collapse
Don't flash the RC29.. it contains an old radio and you'll brick. I think the best thing you can do is revert to the original hardspl, then flash RC29 and root again from scratch.

goldenarmZ said:
Don't flash the RC29.. it contains an old radio and you'll brick. I think the best thing you can do is revert to the original hardspl, then flash RC29 and root again from scratch.
Click to expand...
Click to collapse
I thought you weren't able to downgrade from Haykuro's SPL. Is this true?

G1gurl said:
I thought you weren't able to downgrade from Haykuro's SPL. Is this true?
Click to expand...
Click to collapse
After researching this issue, I am seeing that some people say that you cannot downgrade the SPL...while others say you can.
So, I'm at the point where I just want to unroot and reroot from scratch. Can I safely downgrade my SPL without bricking?

G1gurl said:
I thought you weren't able to downgrade from Haykuro's SPL. Is this true?
Click to expand...
Click to collapse
You can downgrade the spl but not the radio. The problem exists in the communication between radio image and spl.. Haykuro's SPL is only compatible with that one special radio version, anything else will brick it.. but all the other spl's will work with any radio version.
So yes, in this situation you can (and must) downgrade the spl before you try to go back to RC29.

goldenarmZ said:
You can downgrade the spl but not the radio. The problem exists in the communication between radio image and spl.. Haykuro's SPL is only compatible with that one special radio version, anything else will brick it.. but all the other spl's will work with any radio version.
So yes, in this situation you can (and must) downgrade the spl before you try to go back to RC29.
Click to expand...
Click to collapse
Ok, I'm on ADP1 at this point and have the regular Android system recovery. When I try to flash update.zip to downgrade the SPL it says Installation aborted. Is there another way to do this? Thanks for your help...

Balls. I didn't think of that.. :/
If you can't flash from there you really need fastboot.. Come to think of it I'm not even sure how to flash an spl from fastboot...
Err.. I'm mildly stumped. Anyone..? lol

goldenarmZ said:
Balls. I didn't think of that.. :/
If you can't flash from there you really need fastboot.. Come to think of it I'm not even sure how to flash an spl from fastboot...
Err.. I'm mildly stumped. Anyone..? lol
Click to expand...
Click to collapse
fastboot flash hboot (path to image)

metasage said:
I have a quick, simple question that I have tried searching for:
I lost root trying to upgrade to the newest Cyanogen (I think I rebooted when I wasn't supposed to). I am unable to get into fastboot as my computer will not recognize the drivers. I have also lost my recovery image. I have Haykuro's SPL (.005) and wanted to reroot using the DREAIMG RC29 process. My question is: is this possible with the new SPL? Do I have to go back to the HardSPL or can I just downgrade to RC29? I know that I can not change the radio version at this point... I just need to regain root without ADB/Fastboot!
If someone can point me in the right direction or help me out, I would greatly appreciate it.
Click to expand...
Click to collapse
What problem are you having getting fastboot to work, there is a guide on setting up fastboot stickied in theese forums that would be a good reference point to getting it to work. Flashing the spl can be dangerous and can cause bricking, I would recommend trying to get fastboot up and running then you'd only have to reflash your recovery to either cyan's or Amon Ra's with fastboot, then you would be able to use your update.zip files again.

jackslim said:
fastboot flash hboot (path to image)
Click to expand...
Click to collapse
ok cool, thanks.
so.. metasage, your only option is to get fastboot working.. I can't think of any other way round this.

Thanks for your help guys. I'm attempting all of this on my work PC where I can do just about anything except install drivers. Need admin privileges for that
I'll try fastboot when I get home. Thanks again for your help.

This page may be of use to you:
"Stuck on ADP1/ION after trying to upgrade"...
http://wiki.cyanogenmod.com/index.php/RE-recovery-img

......
you can flash the rc29 image just fine.....it overwrites the radio AND the spl
search forums...
though getting fastboot to work is best option...wouldnt recommend fastbooting spl or radio though

i agree with bman007. i have had to have 2 g1's replaced and the only way they will accept the phone for replacement is if it is on tmobile stock ROMs. All i do is flash the rc29 image. (also change customer boot screen back to default). no issues found with just flashing. Hope this helps.

Related

Attempt to fix my phone

First, my problem started with either updating to the new JFv1.43 recovery, or flashing the new SPL from Haykuro.
Symptoms:
1. Everytime I flash a new ROM, wipe or no wipe, I come back stuck at the T-Mobile G1 boot screen. The only way I've found to get through is to take out battery and boot into ADB (the Camera + Power screen) and "fastboot flash boot boot.img". This almost always work.
2. Nandroid stopped working. Nandroid always errors during the process of backing up, and I'd only have splash1.img and splash2.img in the nandroid folder of my SD card. Kind of want to try reflashing the JFv1.43, or even go back to 1.42 (can't find) for troubleshooting. Also not sure if this would affect the new SPL and cause a brick.
3. "Insufficient storage available" with Dude's and Cyanogen's builds. I'm not sure if this one is related to recovery or SPL. This might be caused by past attempts at doing apps2sd (I've done both symlink and unionfs).
Anyways, losing Nandroid has lost me a lot of time with trying out new ROM's, I'd really like to get it fixed. The boot stuck is a nuisance, but much less troublesome than losing Nandroid.
Its the SPL.
lbcoder said:
Its the SPL.
Click to expand...
Click to collapse
So then I'm stuck in this situation? Since the SPL can't be downgraded.
cigar3tte said:
So then I'm stuck in this situation? Since the SPL can't be downgraded.
Click to expand...
Click to collapse
I'm not positive (***so dont do this without researching***) but i think it would be possible to flash to a different one ( i mean, you flashed another SPL over the original one, right? ).
There is a "mega-thread" that has information on all the SPL's and their features/updates. If the info is anywhere, it's prob in there. Search in the Dev forum.
tr.slate said:
I'm not positive (***so dont do this without researching***) but i think it would be possible to flash to a different one ( i mean, you flashed another SPL over the original one, right? ).
There is a "mega-thread" that has information on all the SPL's and their features/updates. If the info is anywhere, it's prob in there. Search in the Dev forum.
Click to expand...
Click to collapse
As far as I can remember, that is where I read that you can't flash the older SPL over the new one.
cigar3tte said:
as far as i can remember, that is where i read that you can't flash the older spl over the new one.
Click to expand...
Click to collapse
damn the man!
cigar3tte said:
As far as I can remember, that is where I read that you can't flash the older SPL over the new one.
Click to expand...
Click to collapse
I could be wrong, but the key is not flashing an older RADIO with the newer spl.
You should still be able to go back to hardspl with no issues.
cigar3tte said:
As far as I can remember, that is where I read that you can't flash the older SPL over the new one.
Click to expand...
Click to collapse
I have flashed from the New H SPL to the HardSPL i originally had on the phone when I found out people were having trouble with the SPL. I install the NEW SPL again to run Hero, but you CAN flash it back to the older SPL I would recomend HARDSPL though.
*not responsible if this doesn't work but I was able to do this without any trouble. Was just a bit nerve racking.
i am 99% sure the above post is correct, don't flash a different radio, but you can flash another SPL right over the Haykuro SPL. i would double check that as there is a 1% chance it will totally screw your phone and i don't wanna be the guy that told you to do something that bricked your phone, but it should work. just to be safe you should make sure splash1 is the t-mo g1 screen so if it stops you can call t-mo
i flashed from the latest haykuro spl 1.33.2005 , to the original t-mobile spl HBOOT-0.95.0000. I fastbooted and it was showing the original spl installed.

Cannot boot after radio and spl update

After updating radio and spl my phone is stuck on the "T.. Mobile" "G1" boot screen.
Any help available? can I access the sd card without booting?
What SPL?
Ten characters...
sjbayer3 said:
After updating radio and spl my phone is stuck on the "T.. Mobile" "G1" boot screen.
Any help available? can I access the sd card without booting?
Click to expand...
Click to collapse
Was it haykuro's SPL? Can you get in to recovery (power+home) or the bootloader (power+camera)?
if it's haykuro's spl...
Hopefully, you READ & FOLLOWED the directions and flashed the RADIO first, then flashed the SPL. If you did not, then your phone is bricked.
if u cn get into recovery reflash ur rom. and like everyone else says hope u flashed the radio 1st
I did the radio first
I was able to boot into recovery, i tried a wipe and a few things but couldnt get it.
Eventually I got it by reflashing cyanogenmod.
sjbayer3 said:
I did the radio first
I was able to boot into recovery, i tried a wipe and a few things but couldnt get it.
Eventually I got it by reflashing cyanogenmod.
Click to expand...
Click to collapse
The SPL wipes the ROM, so after flashing the SPL you would need to reflash >.>
AdrianK said:
The SPL wipes the ROM, so after flashing the SPL you would need to reflash >.>
Click to expand...
Click to collapse
This may sound like a silly question but please forgive me as I have not yet flashed the haykuro spl.
Once you've flashed the new spl, instead of flashing the update.zip of the cyanogen rom, can't you use nandroid restore? Or will that restore the previous spl as well (in my case HARD SPL)?
I ask because I would like to try the spl, but I'm so comfortable with my rom and settings that I would hate to wipe just to try Hero which is still in development. Call me crazy, but I like stable and finished builds. But I am curious and with a lot of time on my hands but not so much that I'm willing to lose everything just to try something that I'm not going to keep.
Binary100100 said:
This may sound like a silly question but please forgive me as I have not yet flashed the haykuro spl.
Once you've flashed the new spl, instead of flashing the update.zip of the cyanogen rom, can't you use nandroid restore? Or will that restore the previous spl as well (in my case HARD SPL)?
I ask because I would like to try the spl, but I'm so comfortable with my rom and settings that I would hate to wipe just to try Hero which is still in development. Call me crazy, but I like stable and finished builds. But I am curious and with a lot of time on my hands but not so much that I'm willing to lose everything just to try something that I'm not going to keep.
Click to expand...
Click to collapse
I'm not actually sure about using nandroid after the SPL flash, but I'm certain that nandroid doesn't copy your SPL (I could be wrong). It would make sense for it to work.
i update inly spl from 1.33.0009 to 1.33.1000 and when its boot greeze in vodafone logo
what happend?
thnks
sjbayer3 said:
After updating radio and spl my phone is stuck on the "T.. Mobile" "G1" boot screen.
Any help available? can I access the sd card without booting?
Click to expand...
Click to collapse
I HAd The Same Issue, BUT YOU DIDNT BRICK YOUR PHONE all YOu Need To Do Is Flash The Rom , Thats The Resone Its Stayin On The Boot Screen Because Of No ROm Installed So Go Into Recovery >connect Your phone> choose usb toggle in recovery> (if on your pc you need a drivers, try putting the sdcard iin a next phone and connect it to the cpu> drag your rom to your sdcard (ROOT NOT IN A FOLDER) and flash it wen it boot first its gonna take long but dont worry it would come on :good:
If I Helped You In Anyway Thank Me Plzz
If You Still having problems just reply to my post

Rooting from Donut

So I'm assuming that the "One Click Root" method is not going to work in Donut. Is that correct?
If so, I'll need to downgrade to Cupcake first. Does anyone have a download link? Is there anything I need to do before applying the update.zip to downgrade?
Thanks for your support
OolonColuphid said:
So I'm assuming that the "One Click Root" method is not going to work in Donut. Is that correct?
If so, I'll need to downgrade to Cupcake first. Does anyone have a download link? Is there anything I need to do before applying the update.zip to downgrade?
Thanks for your support
Click to expand...
Click to collapse
Go read the many stickies on rooting. You don't downgrade to Cupcake, you downgrade all the way back to RC29.
cigar3tte said:
Go read the many stickies on rooting. You don't downgrade to Cupcake, you downgrade all the way back to RC29.
Click to expand...
Click to collapse
Your suggestion doesn't make any sense since there are plenty of devices that shipped with 1.5 (i.e. rogers dream), which happen to be quite incompatible with 1.0 firmware. It is therefore impossible to downgrade to rc29.
If you're *very lucky*, the bootloader you have won't enforce versions and might actually allow downgrading to 1.5, in which case the 1c-root procedure will work.
lbcoder said:
Your suggestion doesn't make any sense since there are plenty of devices that shipped with 1.5 (i.e. rogers dream), which happen to be quite incompatible with 1.0 firmware. It is therefore impossible to downgrade to rc29.
If you're *very lucky*, the bootloader you have won't enforce versions and might actually allow downgrading to 1.5, in which case the 1c-root procedure will work.
Click to expand...
Click to collapse
My apologies, only thought of the G1.
lbcoder said:
Your suggestion doesn't make any sense since there are plenty of devices that shipped with 1.5 (i.e. rogers dream), which happen to be quite incompatible with 1.0 firmware. It is therefore impossible to downgrade to rc29.
If you're *very lucky*, the bootloader you have won't enforce versions and might actually allow downgrading to 1.5, in which case the 1c-root procedure will work.
Click to expand...
Click to collapse
Are you saying that I wouldn't be able to root using the "traditional" method?
OolonColuphid said:
Are you saying that I wouldn't be able to root using the "traditional" method?
Click to expand...
Click to collapse
Post your phone info before you ask that.
cigar3tte said:
Post your phone info before you ask that.
Click to expand...
Click to collapse
Sorry. It's a US T-Mobile G1
I would like to know the answer to this too. I was updating to 4.1.999, something went wrong and now im on 1.6 dev phone firmware. Im not sure if i can go back to rc29 or not or if i should even try. Won't going back to RC29 with the new SPL brick my phone?
(Current) Details are
G1 / Dream phone
firmware 1.6
hard SPL
Build: dream_devphone-userdebug 1.6 DRC83 14721 test-keys
Normal recovery console
Thanks
HardSPL won't brick phones, not to the same degree as dangerSPL anyways.
If you have a REAL SPL (i.e. Engineering, or Hard -- can't imagine why anyone would want that though since it doesn't offer any real advantage over Engineering), then there is ABSOLUTELY NO REASON to go flashing nbh's/downgrade to rc29. The reason for this is that these bootloaders do NOT enforce signatures, and DO allow full access to the system. The only reason for going to rc29 is if you have a RECENT VERSION UNHACKED device that is CARRIER BRANDED (and happens to be compatible).
If you have Engineering SPL or similar, then the ONLY thing that nbh's will do is RISK CREATING A BRICK.
Yes, you can brick *any* time you write an NBH, IPL, or SPL (not just the deathspl). Chances are low, but if something goes wrong, its dead.
sprarky said:
I would like to know the answer to this too. I was updating to 4.1.999, something went wrong and now im on 1.6 dev phone firmware. Im not sure if i can go back to rc29 or not or if i should even try. Won't going back to RC29 with the new SPL brick my phone?
(Current) Details are
G1 / Dream phone
firmware 1.6
hard SPL
Build: dream_devphone-userdebug 1.6 DRC83 14721 test-keys
Normal recovery console
Thanks
Click to expand...
Click to collapse
lbcoder said:
If you have a REAL SPL (i.e. Engineering, or Hard -- can't imagine why anyone would want that though since it doesn't offer any real advantage over Engineering), then there is ABSOLUTELY NO REASON to go flashing nbh's/downgrade to rc29. The reason for this is that these bootloaders do NOT enforce signatures, and DO allow full access to the system. The only reason for going to rc29 is if you have a RECENT VERSION UNHACKED device that is CARRIER BRANDED (and happens to be compatible).
If you have Engineering SPL or similar, then the ONLY thing that nbh's will do is RISK CREATING A BRICK.
Yes, you can brick *any* time you write an NBH, IPL, or SPL (not just the deathspl). Chances are low, but if something goes wrong, its dead.
Click to expand...
Click to collapse
OK cool. Thanks for that. That confirms a few things for me.
Now this might seem a little ignorant but how do i get my root back now? I have done several searches but couldn't really find anything that confirms the exact method for this situation.
If there is no reason to go back to RC29 and do that whole process again then whats the other way of doing it?
As i now have the normal recovery console back any attempt to try and flash CM's just results in the phone telling me i cant su (or don't have root)
Thanks again
Sounds like you have acess to fastboot with your spl you could use fastboot to flash cyanogen's or whichever recovery image you choose, then you would be able flash any rom's you would like through recovery
jackslim said:
Sounds like you have acess to fastboot with your spl you could use fastboot to flash cyanogen's or whichever recovery image you choose, then you would be able flash any rom's you would like through recovery
Click to expand...
Click to collapse
Yeah i do! that sounds exactly like what i need to do. You know of a how-to anywhere for doing this?
Cheers
Do you already have fastboot installed on your pc?? If not a simple search of theese forums can yield you instructions on setting up fastboot. Once you have it installed you can open up a terminal and go the directory in which your recovery image is stored and run the command
fastboot flash recovery cm-recovery1.4.img assuming you're using cyanogen's recovery
jackslim said:
Do you already have fastboot installed on your pc?? If not a simple search of theese forums can yield you instructions on setting up fastboot. Once you have it installed you can open up a terminal and go the directory in which your recovery image is stored and run the command
fastboot flash recovery cm-recovery1.4.img assuming you're using cyanogen's recovery
Click to expand...
Click to collapse
Hey,
Thanks for your help. Managed to get it all working they way you described after some searching and a few hours. Thanks again dude.
OolonColuphid - Hope i didn't hijack your thread too badly. Does any of the above information help you out at all? I found it fairly easy to flash the recovery from fastboot then flash back to whatever i want via the recovery console.
Cheers,
Sean
Alright, I've been doing some reading up on rooting and it sounds interesting. I tried following the steps on theUnlockr.com but keep running into issues. Just FYI, I recently upgraded to 1.6 Donut from 1.5 thru a phone update so it is NOT stock in my phone. Please let me know what I need to do (in lamens terms) so I can get this going.
G1/Dream
Firmware 1.6 Donut
Build Number: DRC83
Please let me know what I need to do (in lamens terms) so I can get this going.
ephayzee said:
Alright, I've been doing some reading up on rooting and it sounds interesting. I tried following the steps on theUnlockr.com but keep running into issues. Just FYI, I recently upgraded to 1.6 Donut from 1.5 thru a phone update so it is NOT stock in my phone. Please let me know what I need to do (in lamens terms) so I can get this going.
G1/Dream
Firmware 1.6 Donut
Build Number: DRC83
Please let me know what I need to do (in lamens terms) so I can get this going.
Click to expand...
Click to collapse
You're phone is still considered stock because it has unmodified software on it, even though you have 1.6 it's through the official OTA update whether installed manually or recieved in due time over your network. You can root your phone, pretty much just follow the steps outlined in this guide found on theese forums
http://forum.xda-developers.com/showthread.php?t=442480
jackslim said:
You're phone is still considered stock because it has unmodified software on it, even though you have 1.6 it's through the official OTA update whether installed manually or recieved in due time over your network. You can root your phone, pretty much just follow the steps outlined in this guide found on theese forums
http://forum.xda-developers.com/showthread.php?t=442480
Click to expand...
Click to collapse
Good looking man, thanks!
Does FlashRec still work on donut, or have they patched that exploit?
OolonColuphid said:
Does FlashRec still work on donut, or have they patched that exploit?
Click to expand...
Click to collapse
OMG! can u not read!

[Q] RUU for mytouch 1.2

So i went ahead and downloaded the files and rooted the phone, then i went and did the clockwork recovery like an idiot. I downloaded the RUU for it from here and it states it cannot find the phone. Is there a special mode i have to put it into? Can someone give me a little insight here. Thanks
WHAT?
can't understand a thing of what you wrote!
Please more info...
Sorry let me clarify
I went ahead and rooted using the androot program.
After rooting i downloaded rom manager so i could make a nandroid backup.
Now i realized i flashed clockwork recovery onto the phone.
I downloaded the t-mobile official RUU installer and tried to run it. When i connect the phone it is seen but the program cannot see the phone to flash it back to bone stock without the recovery.
Does anyone know how i can flash the bone stock rom and everything else so its like i just removed it from the package.
I hope this clears everything up. Sorry
ok...
The recovery IS NOT the problem...
It's a driver thing...
Delete the drivers on the system, and install the latest htc sync...
It will come with the leatest drivers...
BUT WHY?
why do you want to do the ruu??
Are you not happy with root?
If it's the wronge recovery, you dont need the ruu..
you can just flash a new recovery!!???
WHY?
To be completely honest i love having a rooted phone. I have a rooted vibrant.
I just really dont know what im doing at this point. I already bricked one mytouch and am afraid im going to do something wrong and brick it again. I really just want the RUU to work in case something happens and i have to send it back. If they go into fastboot they are going to know i did something.
Trust me i would love to put amon ra's recovery on it but i have no idea how and cant understand how to do it. I feel lost when it comes to android phones.
I want to put froyo on here but i should wait for the official update.
That is another thing will the rooted phones still take the OTA for the updates when they come out even if rooted.
Sorry if this is a lot of questions, but im just scared to do anything now since i failed the first time around. thanks
OK... i'll help you all the way...
Write here what ruu did you use...
THE FULL name...
Then i'll send you what you need for your device to return to stock condition :0)
After you see that your phone can go back to stock condition we can work our way back to world of root :0)
It's very easy once you use the right img's....
I used this link since im at work, the file is at home.
39) [xda-ftp] [4shared] 2.10.531.4 T-Mobile USA DRD35
Its out of this thread
[ROM] Official HTC Sapphire/Magic/MT3G RUU ROM Links
The link for that specific thread
http://forum.xda-developers.com/showthread.php?t=659403
The drivers i downloaded for win 7 64 i just googled and installed. If there is another driver pack i should get ill try that htc sync when i get home.
I really appriciate the help.
OK... use this link:
http://rapidshare.com/files/413792527/2.10.531.4_T-Mobile_USA_DRD35_ROM.rar.html
I divided the img's into 2 folders...
System = the android system... flashing those will give you stock android on your phone.
Hardware = the stock spl, radio and recovery.
If you only want the system, flash the system using the radioSwitcher tool in my signature... use the custom boot/system/userdata box....
If you ever have to return your phone for repair or just want to be back at stock(complete reset):
Flash all 6 files.... again using the tool..
For the hardware part use the "custom spl/radio/recovery" box...
The only problem is the spl has nb0 extension... so you have to use the fastboot and a cmd promt on windows... type:
fastboot flash hboot hboot_7201A_1.33.0013G_091021.nb0
or you could rename the file to hboot_7201A_1.33.0013G_091021.img and use the tool for all files... but i have never tested the renaming approach!
Good luck!
Ok i got all the files and the radio tool.
I put things where they need to be and just wanted to flash recovery.
When i click flash it fails every time. I cannot find drivers for this thing anywhere. Can i get help on this please. thanks
are you in fastboot?
try "check connection" before flash. What does it say?
Do you have eng spl?
You need to do your homework before doing such a thing like flashing...
I'll help you if you do your homework :0)
here is what i get when connected
Radio version: 2.22.23.02.
SPL/hboot version: 1.33.0013.
product: sapphire.
mid: sapp31000.
security: on.
build-mode: ship.
-----------------------------------.
Print of device info SUCCESSFUL.
Device is NOT ROOTED - flash old/new disabled.
Please visit http://forum.xda-developers.com/showthread.php?t=677045 for further instructions.
Flashing "recovery" - PLEASE WAIT.
"recovery" flash FAILURE.
HT01YPB12437 Connected.
Flashing "recovery" - PLEASE WAIT.
"recovery" flash FAILURE.
It states that im not rooted when i used the androot program and have superuser permission on the device. Now i am completely confused.
How do i just go about using the RUU and forgetting about rooting? I plug it in and click to start the process and it says it cannot find the phone.
Is there a special mode i have to put the phone into to use this tool?
It's a mistake from the tool...
When it sayed that you dont have root, it meant you dont have eng spl...
I'm going to change that in the tool in the next version....
here is something i wrote to somebody else...
Read it and use the info which could help your case..
But here is the headline: Flash spl(1.33.2010) using recovery, then flash system files using tool, then flash stock spl using fastboot or rename stock spl to hboot.img and flash using tool!
http://forum.xda-developers.com/showthread.php?t=753972
Good luck...
PS: read the entire thread... the info is spread!
What if i would skip the tool all together and use the fastboot commands to flash the files you sent me in that rar file?
If i just do the recovery i will lose hboot and fastboot correct?
I am so scared to do this. Sorry im a complete noob at this.
Also what is a sapping file? I can make a goldcard no problem and make it work.
Thanks for answering everything since i have not done anything to it what so ever yet.
You cant use fastboot because the spl (which controls the fastboot) will not allow you do that... it's called a perfected spl because HTC has closed all possibilities for you to flash anything.
That why we use the custom recovery. With a normale recovery we cant do **** either. But custom recovery gives the tools and permissions to do what ever we want.
Thats why i wrote that flash a different spl using recovery, then use the tool or fastboot to flash the rest...
The tool is safer, belive me... we have over 300 or so downloads with no error reports :0)
But if you are comfitable with fastboot, by all means do it there :0)
Just make sure that spl and radio can play together....
When you are done playing with eng spl (eng = engineer spl, leaked from HTC), flash custom spl back again... before you boot your system, or the system will have many disadvanteges.. the eng spl it not made for your device, but it works just fine... just dont load the system with :0)
Whenever you want to play with fastboot again, flash a eng spl from recovery and you game again....
So read my instructions carefully before doing anything...
Read more info around this forum...
When you are ready, do the things i told you!!!!
I can't help you anymore... The rest is up to you...
If you get into problems, please report back...
All the info is here and on the other thread i linked to before... GOOD LUCK
tgrantjr said:
Also what is a sapping file? I can make a goldcard no problem and make it work.
Click to expand...
Click to collapse
sappimg is complete image of a system with non-pefected spl or custom recovery... you lose everything with a sappimg...
The goldcard is needed because you need to "fool" the device to accept the sappimg even if it is not meant for your device!
But you allready have custom recovery... no goldcard needed!
I am so confused. I'm so sorry
Sent from my SGH-T959 using XDA App
check your pm
Well I came across another of your posts and it said to turn off debugging. Mine is on. Il try it tonight when I get home.
Sent from my SGH-T959 using XDA App
hi, if anyone has this file can you please reupload it. i flashed an spl to my rooted mytouch 1.2 and now instead of it saying 32a its saying 32b in hboot. i hope there is a way to use this tool to return it back to stock and start all over again. i can still boot into recovery but i cannot find the correct spl to flash. any help would be greatly appreciated.
i managed to fix it by recreating a goldcard, and running the tmobile ruu

HELP! Soft Bricked phone!

I unroot my mytouch using the old sappimg.nbh method.
It flash successfully but now it won't boot!
I got a S-ON spl so I can't do fastboot and there is no recovery menu
I can still get into the fastboot menu but that is it
Can I use a 32B RUU to recover my phone then root it, flash the correct splash screen, then flash the correct spl & radio for my region?
i BELIEVE so... as long as you can get to hboot menu you should be able to RUU... did you have RAM hack installed .0013d?
I'd go back to T-Mobile default and start all over.
This post has info and links to restore 1.5, upgrade to 1.6 and then 2.2
http://forums.t-mobile.com/t5/Opera...ooting-installing-Donut-and-Froyo/td-p/505421
If you want to flash a custom ROM just restore to 1.6; if you want to take advantage of the extra ram then restore to 2.2 and accept the OTA update.
Hope it helps.
--
Carlos
All my current mytouch info before I soft bricked is in my sig.
I tried the sappimg.nbh from that forum topic but no matter how many times I flashed it, it doesn't work
Any way thanks for your help, I'm getting a replacement phone on friday
UberMario said:
All my current mytouch info before I soft bricked is in my sig.
I tried the sappimg.nbh from that forum topic but no matter how many times I flashed it, it doesn't work
Any way thanks for your help, I'm getting a replacement phone on friday
Click to expand...
Click to collapse
since you are on the 2708+ radio and kernel you might need to downgrade those in fastboot... then try to reroot... but you are getting a new device anyhow...
edit: reread your first post and S-on... sorry... maybe next time try to downgrade the radio and spl before downgrading ROM...
mmaiolo81 said:
since you are on the 2708+ radio and kernel you might need to downgrade those in fastboot... then try to reroot... but you are getting a new device anyhow...
edit: reread your first post and S-on... sorry... maybe next time try to downgrade the radio and spl before downgrading ROM...
Click to expand...
Click to collapse
I was going to try fastboot cyanogenmod 6 or a donut rom but the spl that came with the new radio is S-ON so I can't fastboot anything
then the sappimg.nbh made the spl a perfected spl

Categories

Resources