Related
Hi!
Is there anyway to insert an icon or its shortcut into the 'Start' --> 'Settings' page?
The reason is that my Voice Command icon disappeared after I install a new program or that it could be due to my auto registry cleaning process by MemMaid, Pocket Mechanic etc. However, the program is still there and in the Buttons I can still see Voice Commmand being assigned to a button.
Thanks
Registry
Check your registry entries Bro.
HKLM\Control Panel\
Is Voice Command still there?
Yeah, dont use Pocket Mechanic to to clear unwanted Registry files.
there is 3 registry files that belong to Microsoft Voice Command which is not intended to remove even though Pocket Mechanic prompted the files has no use anymore.
I experience myself, and i did posted some explanation and i cant find the link.
probably under Microsoft Voice Command
RE
Hi guys!
I just uninstalled and reinstalled my MS Voice Command.
After that I cleaned using Pocket Mechanic. No problem encountered with MS Voice Command.
However, I suspect under the right circumstance Pocket Mechanic is the cause of my MS Voice Command to cease functioning on a couple of occassions
I'll be back in no time on this thread again. Thanks everyone
RE
Hi!
I spoke too early and I'm back now.
Earlier, after cleaning with Pocket Mechanic, MS Voice Command still works. I guess it worked because it already was loaded into the memory.
Then after a soft reset it cease to function.
DR,
Quote
"Check your registry entries Bro.
HKLM\Control Panel\
Is Voice Command still there?"
Yes, its there. Its just that the voice command icon in the SETTINGS screen has gone :roll:
If Pocket Mechanic is the real culprit I think somebody got to inform Anton Tomov (the developer) about this so that a fix can be made.
it may not be the cause of Pocket Mechanic, it could be Microsoft.
You should know Microsoft always wanted to control Apps Protocol which i think that way.
Well. maybe you wanna try the latest Pocket Mechanic 1.52.
RE
I have an explanation but not sure if its right.
I'm using the uograded version of MS Voice Command v1.5 and Pocket Mechanic v1.52
First, you install v1.0 - v.1.1 version of MS Voice Command then you upgrade to version v1.5
Now, when you run Pocket Mechanic it looks for bad file links, uninstall cabs etc.
Here's the problem. I suppose v1.5 MS Voice Command still depends on the links of its earlier version which are considered bad by Pocket Mechanic. Hence, running PM causes MS Voice Command to cease functioning when some of its earlier version links are removed.
It should not happen to a software undergoing an upgrading (not new install) process. For other programs that have been upgraded running PM after that has no effect on the later program. In this instance this does not happen to MS Voice Command.
How's that?
Ok, probably, let me explain how i make Microsoft Voice Command(MVC) work for me.
I have MVC v1.0.
Steps.
1. Install MVC v.10 (By default, the path is C:\Program Files\Microsoft Voice Command)
2. Go to settings, double check whether is the app version v1.0.???
3. If Yes, go to step 4.
4. Uninstall MVC v1.0
5. Soft reset
6. Use Pocket Mechanic to clear all the bad links until no bad links are shown
Note: Do not uninstall MVC from your DESKTOP, leave it alone.
Next
1. Soft reset PDA (this step is up to you, i did)
2. Install MVC 1.5(upgrade version downloaded from Microsoft site)
3. During installation on DESKTOP.
4. Change the path to to MATCH the install path with MVC v1.0
5. If you dont, the path for installing MVC 1.5 will be (C:\Program Files\Microsoft Voice Command\Microsoft ???????? ???????\US Version)
Note: you have to change the path to match the installation path with MVC 1.0
6. Completion of installation into PDA.
7. Soft reset
7. Launch Pocket Mechanic
8. Like i have said, before you install MVC v1.5, i believe Pocket Mechanic has cleared all the bad links.
9. so now, you will only see 3 bad links which belongs to MVC.
Done, enjoy the apps.
Ops, hope i dont get into trouble with so clearly explanation partial hack.
RE
keithhiap,
The problem doesn't lie with the MSVC installation process as you mentioned that only 3 bad links will be finally left behind.
The problem comes when you perform the same upgrading or install/uninstall other programs.
When you run PM it'll find many more of such bad links and, well, your MSVC bad links will not be distinguishable with the rest. Removing the bad links incidentally will render your MSVC to cease functioning.
ops, forget to tell you my MSVC is although 1.0, but upgrading to v1.5 is not possible.
Why, is it because 1.5 is intended for US version only
Like i have said, even though my version matches what microsoft mentioned. as long as you are holding 1.0, you can perform upgrade 1.5, but for my situation , i cant.
No idea
that y , i experience such installation way, in order to make my upgrade works
RE
My MSVC is v1.01 and upgrading to v1.5 is without problem
i wanted to purchase 1.5 full version, but too bad, not avaliable for Asian.
that y i have said Microsoft is controlling, forcing people to use alternative way to break through such as Piracy.
:roll:
later, return to my movie
Finnish Aali Alikoski, Academic Developer Evangelist of Microsoft Finland, has just released a highly useful application, SMS Notifier, along with its source code.
The application offers some really nice and, up to now, to my knowledge, on the Pocket PC Phone Edition platform, unprecedenced functionality: it waits for unanswered incoming calls and, depending on the configuration settings, it either sends an SMS message to the caller (with configurable contents), possibly containing also the end time of current appointment (this is also configurable) or adds an item to the system-level Windows Mobile calendar (containing the caller info).
The latter functionality is nothing new – you can check the caller's identity and the call date/time in any low-end mobile phone. The former – that is, the SMS feedback –, however, is really long-awaited!
Downloading and Installation
You can download the application here. Transfer the CAB file to your PDA and execute it there.
If, after installing and upon starting SMS Notifier, you're presented this error message, make sure you download and install .NET CF 2.0 from Microsoft. Make sure you install it in the main memory. Also note that, as the application heavily relies on the new, connectivity/database-related libraries of .NET CF2, it's not very easy to port it to run under the earlier Compact Framework library. (For CAB lovers, you will only need c:\Program Files\ Microsoft.NET\SDK\CompactFramework\ v2.0\WindowsCE\wce500\armv4i\NETCFv2.wm.armv4i.cab ; you can also download it from here (to avoid having to download the 24 Mbyte-long MSI installer).
Configuration
On the main set-up screen, there're some checkboxes in AND relationship. The first one, Send SMS to unanswered callers, instructs the application to send an SMS to everybody that tries to call you but his or her calls remain unanswered. Using (not disabling) the second two checkboxes, however, you may make the application not send a SMS to anyone that calls you, just to the ones that call you during an active/busy appointment.
The checkbox/text input area at the bottom makes it possible to report the end of the current appointment so that he or she can know when you are reachable again.
The Calendar tab contains only one checbox, which instructs the application to enter all the incoming calls into Calendar.
Note that the configuration settings are not correctly saved/restored, as the author also points out.
Usage
To use the application, just start and configure it to your liking. Do not click the Quit button – then, it won't send your callers any SMS. Just let it run. You can, of course, suspend the PDA while you do so and also minimize the application. This also means you can safely start it from \Windows\Startup (just like the other highly recommended application, PMRecorder – please see this article on it if interested) – if it's running in the background, it'll safely catch all unanswered calls.
Other stuff
I also recommend the author's blog here. Don't be taken aback of some of the material's being in Finnish: there's nothing really interesting in them for non-Finns (the Finnish blog posts are only about local, Finnish meetings, conferences). Unfortunately, some of the other Finnish .NET bloggers (see the links in the lower left of the page) post exclusively in Finnish, even highly technical stuff that would be interesting for non-Finnish speakers too. (Feel free to ask me in my blog for a public translation for some of them if really interested.)
thanx man .. jus tried it . this application actually works .rockinnn
I can't seem to be able to install the .net Framework 2.o on my new T-Mobile MDA - USA (Wizard)
I get the same error from .cab install or activesynch install:
"Installation error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info:4"
Any suggestions?
oops
PhoneGuy said:
I can't seem to be able to install the .net Framework 2.o on my new T-Mobile MDA - USA (Wizard)
I get the same error from .cab install or activesynch install:
"Installation error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info:4"
Any suggestions?
Click to expand...
Click to collapse
Did you try to install it in the main storage or the storage card? Only install it in the main storage.
Yeah, the options were "Device" or "Storage Card".
I tried Devicce but no luck...
PhoneGuy said:
Yeah, the options were "Device" or "Storage Card".
I tried Devicce but no luck...
Click to expand...
Click to collapse
I've encountered the same when I first tried to install it on a storage card. Then, subsequent installs to the main memory didn't succeed either. A hard reset helped.
I have installed it and it seems to work well. My only concern is that it seems to use the notification application of the phone rather than the call list of the phone. The reason I say this is because it puts a calendar entry in when I miss a call then adds another entry when I check the notification of missed calls.
is this what is supposed to happen? would it send 2 text messages in this case (when the call comes in and when I check the notification that the call did come in)?
thanks,
Edwin
also, it seems if I am on the phone when I miss a call it uses the name of the person I was on the phone with and not the person I missed.
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
ethorn said:
is this what is supposed to happen? would it send 2 text messages in this case (when the call comes in and when I check the notification that the call did come in)?
Click to expand...
Click to collapse
That's what happens for me... I stopped using it because of the duplicated sms's...
meschle said:
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
Click to expand...
Click to collapse
Tried it. Keep getting "Cound not find resource assembly" error.
Strange works sweet for me.
this is the link I used
http://www.freewareppc.com/communication/callassistant.shtml
meschle said:
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
Click to expand...
Click to collapse
after using the Ruttensoft on my Qtek, i can no longer creat SMS, when I click on new, only a while screen appear, cannot input both phone number and Text.... did anyone meet the same ???
meschle said:
Strange works sweet for me.
this is the link I used
http://www.freewareppc.com/communication/callassistant.shtml
Click to expand...
Click to collapse
No it didn't... you didn't use this program. we are trying to give feedback to the author of this program which has so much more potential than the limited software you used.
No sms works for me even when activated. my qtek rom is 1.6.7.1 maybe that's the diff. Sorry ethorn could start a new thread if you like but may help some people if the other prog don't work for them.
Hi
I have a XDA 2i & a XDA Mini S and use a program called Do Not Disturb by Jguisoft, a very small footprint and easily configurable
no I am all for putting ideas of other products, but the way you worded it sounded like this program that Menneisyys worked on worked on your phone and that the version of his program you used was at another link.... my problem is that neither are true. Software Guru did things right and just introduced another alternative.
thanks guys
Software Guru said:
Hi
I have a XDA 2i & a XDA Mini S and use a program called Do Not Disturb by Jguisoft, a very small footprint and easily configurable
Click to expand...
Click to collapse
Can you provide a link? Did a google and no results found.
Cannot download the SMSNotifierSetup cab
Can someone please post this as i cannot seem to download it.
thanks
is there anywhere to download the cab file Microsoft Voice Command V1.6.19971 I know this is classed as warez but I bought the software from handango the original 1.6. cant get it to work properly with my diamond
any help would be appreciated
How can we trust you Sorry, I know where you can find it because I did myself, but I don´t say anything.
Anyone know if any of the later builds are UK versions?
I have 1.60.4622.0
It works ok on my Diamond but would like a later build but they all seem to have US voice.
It takes a bit more effort to get it to recognise contacts names from my voice.
Google is your friend
being trying to resize a screencapture of my e_invoice from handango but cant get it small enough I'll keep trying
MS Voice Command is in a gray-area because it is included with the unlocked Diamond and AT&T Tilt, both of which I currently have, but it is preloaded into the OS and not installed as a CAB file, so providing a CAB installer for MSVC would still be considered warez.
I'm closing this thread for now (due to the aforementioned gray-area), but if the XDA policy on MSVC changes, we'll revisit this.
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
Do not launch two or more instances of the program at the same time, could really mess things up. -- se the forum (thanks tucahara)
To stop the program, u must use a process manager.
it would be good if someone could make a cab to install it. -- done see the forum (thanks tucahara)
this is still a beta, I intend to make ajustments as people give feedback.
Thanks,
hope u like.
-----first update---
now, an file called "audioswitch_error.txt" in the root directory will hold the error messages.
------------ List - Working ------------
wizard - I tested
P3301 or P3300 - I tested
att tilt - I tested
touch 3452 and 3450
touch dual
touch cruise
touch HD
Sony Ericsson Xperia X1
BenQ E72
Titan --> see the forum
------------ List - NOT working ------------
T-Mobile Diamond
HTC Touch by Sprint
Samsung SGH-i780
------------------------------------------------------------------------------------
check the new thread at:
http://forum.xda-developers.com/showthread.php?t=502361
new aproach to do the switch and now open source, even with an class that others can improve and put in other apps...
Some people complain about me not openning the source of the app, I have just made this way because there was proprietary code inside and I had no time to rewrite it without the proprietary code.
I have made the best I could, and now I had some time and rewrite the app in open source, to those who only complain about it, get the code and make it better instead of complaining!
Thanks for all that encourage me to continue the work and helped the development.
will retire this project for while...
thanks u all.
Audioswitch for Skype
On HTC Touch by Sprint (CDMA, also known as Vogue), audioswitch does switch the audio in the Skype 2.5 windows mobile PPC from external speaker to handset. Unfortunately, the microphone is then also disabled. I hope you'll be able to tweak your audioswitch to resolve this.
Thank you so much for developing this wonderful applet. I'm sure you will have the gratitude of many frustrated Skype windows mobile users.
What really happens is that when the sound output is switched in some phones, the microphone gain changes too. This happens because the phone thinks it is a "normal call".
Most of the times the mic gain increases, but in your phone it must be decreasing. Try to figure out in registry where the mic gain controls are recorded and chage all of then to the same value. I had this issue with my P3301 and solved this way, but there is quite a time now and I do not remenber where are the reg keys to change, but I have found the information here in the forum.
I will try to figure out for other "hack" to solve this issue... thanks for reply.
doesn't work at T-Mobile Compact IV (aka Diamond)
Sound went to loudspeaker....
PS: fring last version working fine with sound at mine phone (without any additional programms). Sound is going to correct destination automatically
I just tried the latest version of Fring, which automatically switches audio to earpiece when call is connected.
The same issue occurs with the new Fring as I described above with your audioswitch program: I can hear audio through earpiece, but microphone doesn't work (or is inaudible).
I couldn't find a tweak or registry hack to correct this. Any help would be greatly appreciated.
MarceloFB said:
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
it would be good if someone could make a cab to install it.
this is still a beta, I intend to make ajustments as people give feedback.
If someone like this program and wants to make an donation...
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=4WLQVA6LTKWSL&lc=GB&item_name=marcelofb&item_number=marcelofbxdadonations¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG_global%2egif%3aNonHosted
Thanks,
hope u like.
Click to expand...
Click to collapse
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
OOOH
If this program works on the new BenQ E72 I'm getting in a couple of days I'll certainly donate!
THANKYOUTHANKYOUTHANKYOU
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
baal_zebub said:
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
Click to expand...
Click to collapse
hehhehe, I made troca2, I will see if the switch code is the same or if I have made some mistake...
are u sure you have put the program in the correct directory?? I will make some modifications to have an error feedback. So u can see if something is wrong...
JKingDev said:
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
Click to expand...
Click to collapse
It is a good idea to use hook, I have not think of it!
I use a proprietary code included in a lib at the company I work for to make the "switch" but it is not different of what u find here in the forum.
Maybe we can make an effort to re-make it with hooks...
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
so to sum up the way i have it now (most files included) on my xperia x1:
1) installed skype
2) installed mortscript
3) add skypesoundswitch to \windows\....
3) add skype.mscr to \.... (root)
4) overwrite skype.lnk with the new skype.lnk in \windows\start menu\programs\..
in the way whenever i open skype(.lnk), it opens skype.mscr, this opens skypesoundswitch.exe and than skype.exe... when you close skype.exe it closes skypesoundswitch.exe...
it seems to work perfect.. but hey maybe i am doing something totally wrong here.. than just shout!
by the way, the .mscr and the .lnk files are offcourse edit-able .. so you can put the files everywhere you like..
madhijs said:
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
Click to expand...
Click to collapse
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you will have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch. Or please show me where to find details on how to code this myself. Thanks!
Hat off to both of you and really glad that we will have a much improved solution.
JKingDev said:
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch.
Click to expand...
Click to collapse
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
madhijs said:
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
Click to expand...
Click to collapse
Yes it must be run at startup but placing a link in your startup folder will make everything transparent to the user. I don't think there will be an effect at startup. In it's current form it must check every second (or whatever you set the timeout to), but its only a little bit of code. I am not really sure if that will really have an effect. The more often it checks the faster it will switch when you open skype, but also the more processor use. Check less often and it uses less processor, but there might be a delay in switching the audio. I proposed doing it by hooks though because this would use even less processor. The app will only check when a new window takes focus, rather than just periodically checking. This way it only checks when it needs to and will always switch instantly.
I am glad u liked the program.
I will try to answer most of the questions...
1- JKingDev:
I have though in your idea of using hooks, but if I use a hook, the program will have a loop anyway to check for the messages(hidden loop ;-) ), and it would have to have an "fake window" or something to process the messages. This way we have only one loop, in a very simple command line program with high optimization, so we have to think what is really the best way of doing it... I will pm u as soon I have any time to "program" again. hehe
2- people that uses mortscript with the old "troca2"
I will try to make a way to make this program work the same way as troca2, maybe with an "argc argv", wait the next update.
3- the battery life??
if u notice any battery life decreasing with the usage of the program, configure a bigger delay, maybe 5000ms, it is a matter of adjust the "timming" for each processor. Post your results here so others can find the optimum value for the delay in their phones.
4- have to start the program every reset?
yes, just put it in the startup folder.
maybe someone can make an cab that put the program in the right place and a link in the startup, it would be cool! I dont have an easy program to deal with cabs, and the vs projects for cabs.... I really cant make that thing work!!
well it is only the batterylife i was worried about. but i'll try running the phone this weekend with the program running and doing some skype.. lets see how it turns out!
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
weekendli said:
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
Click to expand...
Click to collapse
will check this, but people reported that worked in xperia... and it is running in my P3301... anyway, will check and post an wm6 build if it is the case... check the error file and see if it tells anything.
Other thing, this program uses low level api`s, so your windows MUST be fully unlocked for it to work in wm6.
In order to have both TTS and Contact POI's working in iGO8 you're going to need two different versions of iGO8.
FIRST VERSION NEEDED: iGO8 v8.32.64029 (Nov 7 2008)
This version is designed for the PDA, and as such is able to geocode contact information. Install this version with the attached 64029sys.txt
At this point if everything is done correctly, iGO8 should boot normally BUT be VERY slow and unresponsive. This is GOOD! This is iGO8 Geocoding your contacts. Depending on the quantity of contacts with addresses you have, this could take a VERY long time. When it is done you will get a message similar to the following:
Geocoding finished with errors. 38 of 110 addresses found, 72 failed. Do you want to see the details?
At this point you could see the details of the errors, which will show you all of the addresses that are not entered into Outlook in a iGO8 palatable way. You could just ignore them and be happy with what you have (unlikely), or go back into Outlook, correct the formatting errors, and try again (and continue your suffering).
This can be VERY tedious... iGO is one picky bastard. You might even have to input the addresses into iGO as destinations, see how iGO formats the addresses, and then change the Outlook contacts to match the format iGO uses for a particular address.
I have even heard that contact need to be deleted and reentered into Outlook in the proper iGO8 fashion or you will continue to get errors for particular contacts.
SYNTAX ADVICE:
not Blvd. --> Blvd (The little "." will throw an error every time)
not Blvd --> Boulevard ("Usually" iGO dislikes abbreviations)
not N. --> N --> North (This is hit or miss)
NEVER use apt# (just give up and don't try)
NO Suite # (same as above)
If you have to have apt or suite #'s AND you want iGO to geocode, then the only way to get it both ways is to use the "OTHER" address in Outlook to place the iGO friendly address and the correct address in the "Business" or "Home" Outlook address. The ones with apt or suite # will error, but the second addresses in the "Other" address without the apt or suite # will geocode as POI's fine.
When you are done, you will be left with this little piece of GOLD... YOUR CONTACT POI's FILE ! ! !
\iGO8\save\gccache.dat
You'll want to back this file up somewhere else for safe keeping. We don't want all this hard work to go to waste.
SECOND VERSION NEEDED: iGO8_v8.3.4.102680 (Aug 13 2009)
This is the newest PNA version that does not have the ability to geopcode contact POI's, but it is able to read the gccache.dat file created by the PDA version above AND it is capable of TTS. Install this version with the attached 102680sys.txt
You will need to install this version and simply place the gccache.dat into the iGO/save folder and iGO will do the rest for you.
Now getting iGO8 to reliably run TTS is a different story. TTS requires ALOT of RAM to run. If there is not enough RAM available (~115-120mb), then it will simply refuse to play TTS voice prompts and you will be stuck with standard voice prompts. To free up a good chunk of the necessary RAM install both NOPushInternet_v2.cab and SSK TP2 Dynamic Resource Proxy.cab. To get the rest your available RAM to acceptable levels you will need to disable TF3D, run CleanRAM, and then start iGO.
Sounds complicated? Well, fortunately itsachirpthing over at PPCGeeks has created a nice little script that does just this. The original post can be found HERE. And the original thread can be found HERE. I recommend reading both these original threads. They have additional information to get iGO8 working properly on TP2.
itsachirpthing @ PPCGeeks said:
I have a custom mort script that will turn off TF3D, run CleanRam (I have custom process enabled to exit Opera and Tmail within CleanRam), then run Igo8. Once you are finished with Igo and you exit, TF3D will restart. This took some testing, but this works everytime with the high quality TTS voices. I have had no issues. I have posted the code below, this will work on your device providing that you install CleanRam to your "device" and your IGo program is listed as "\storage card\iGO8\igo8.exe". These HQ TTS voice issues baffled me for months, but now they work consistently without a soft reset.
Again this code will stop TF3D, Run CleanRam, Start Igo... then when you exit iGo it will restart TF3D.
manilastate=ProcExists("manila.exe")
If (manilastate)
Kill("biotouch.exe")
RegWriteDword ("HKLM","Software\Microsoft\Today\Items\TouchFLO 3D","Enabled",0)
RedrawToday
endif
RunWait("\program files\htcaddicts cleanram\htcaddicts_cleanram.exe")
RunWait("\storage card\iGO8\igo8.exe")
Sleep(5000)
Kill("Repllog.exe")
While ( ProcExists("igo8.exe") )
IdleTimerReset
Sleep(500)
EndWhile
If (manilastate)
RegWriteDword ("HKLM","Software\Microsoft\Today\Items\TouchFLO 3D","Enabled",1)
RedrawToday
Run("\windows\biotouch.exe")
endif
I have attached the script to run with mort script. I hope others can benfit as well. Good luck and enjoy!
Click to expand...
Click to collapse
I have added this iGO script to the MortScript.cab posted here. You need it and CleanRAM.cab. Install both to the device, not the SD Card. Then just click on the Plain iGO Scipt icon in the Start Menu. The script will close TF3D, run CleanRAm, start iGO8, and when iGO8 is exited, it will start TF3D again
Inaddition to the above Script, you will need to install both NOPushInternet_v2.cab AND SSK TP2 Dynamic Resource Proxy.cab
in order to free up enough RAM. But with the above script, CleanRAM, and these two cabs, you should have enough RAM to run TTS of TP2. These CAB's are attached.
The sys.txt files attached are what works for my ATT TP2. It took many hours to find the correct setting for each iGO8 version and I am providing them to make your process easier. If they don't work or you get some other error for what ever reason... I AM PROVIDING NO TECH SUPPORT. This is simply information for your use.
Good Luck!
PS. This works best if you have two micro SD cards. One for each version of iGO. That way if you add new contact address, you can simply pop out one card, geocode the data, and transfer the new gccache.dat file to the other card.
PPS. Once you do get everything working in iGO 8 properly.... DO NOT MESS WITH ANYTHING ANYMORE!!! iGO8 is one finicky bastard and will throw a TTS temper tantrum (refuse to load TTS) if you do... I know ALL TOO WELL!
DONT ASK ME FOR COPIES OR WHERE TO GET THE ABOVE PROGRAMS....
BUY THEM or USE SOME CREATIVITY.... like GOOGLE!
Hi:
Thanks for the great info. I have a few questions. The Mortscript seems to run clean RAM, and disable TF3D, but then TF3D starts back up on its own. Is this normal?
Also, is the script supposed to also start iGo, or must this be done manually; script did not start iGo for me.
Thanks again!!
The script is as written above. If the location of iGO8.exe is not where the script is pointed you 'll have issues.
RunWait("\storage card\iGO8\igo8.exe")
If you do not have a iGO8.exe in the above folder, you'll need to just make a second copy of application.dat in the same folder and rename it iGO8.exe. They are the same file, just different names.
Hi:
Thanks so much for your help. You were absolutely right, my .exe was in Storage Card/Program Files.
It is working well now.
Unfortunately it didn't make TTS work for me, but I have had problems with it for a LONG time, and never been able to find a fix.
Thanks anyway for everything
cincy1020 said:
Hi:
Thanks so much for your help. You were absolutely right, my .exe was in Storage Card/Program Files.
It is working well now.
Unfortunately it didn't make TTS work for me, but I have had problems with it for a LONG time, and never been able to find a fix.
Thanks anyway for everything
Click to expand...
Click to collapse
Were you using the above mentioned iGO versions? If not... I wouldn't know.
lokmeup said:
In order to have both TTS and Contact POI's working in iGO8 you're going to need two different versions of iGO8.
FIRST VERSION NEEDED: iGO8 v8.32.64029 (Nov 7 2008)
This version is designed for the PDA, and as such is able to geocode contact information. Install this version with the attached 64029sys.txt
At this point if everything is done correctly, iGO8 should boot normally BUT be VERY slow and unresponsive. This is GOOD! This is iGO8 Geocoding your contacts. Depending on the quantity of contacts with addresses you have, this could take a VERY long time. When it is done you will get a message similar to the following:
Geocoding finished with errors. 38 of 110 addresses found, 72 failed. Do you want to see the details?
At this point you could see the details of the errors, which will show you all of the addresses that are not entered into Outlook in a iGO8 palatable way. You could just ignore them and be happy with what you have (unlikely), or go back into Outlook, correct the formatting errors, and try again (and continue your suffering).
This can be VERY tedious... iGO is one picky bastard. You might even have to input the addresses into iGO as destinations, see how iGO formats the addresses, and then change the Outlook contacts to match the format iGO uses for a particular address.
I have even heard that contact need to be deleted and reentered into Outlook in the proper iGO8 fashion or you will continue to get errors for particular contacts.
SYNTAX ADVICE:
not Blvd. --> Blvd (The little "." will throw an error every time)
not Blvd --> Boulevard ("Usually" iGO dislikes abbreviations)
not N. --> N --> North (This is hit or miss)
NEVER use apt# (just give up and don't try)
NO Suite # (same as above)
If you have to have apt or suite #'s AND you want iGO to geocode, then the only way to get it both ways is to use the "OTHER" address in Outlook to place the iGO friendly address and the correct address in the "Business" or "Home" Outlook address. The ones with apt or suite # will error, but the second addresses in the "Other" address without the apt or suite # will geocode as POI's fine.
When you are done, you will be left with this little piece of GOLD... YOUR CONTACT POI's FILE ! ! !
\iGO8\save\gccache.dat
You'll want to back this file up somewhere else for safe keeping. We don't want all this hard work to go to waste.
SECOND VERSION NEEDED: iGO8_v8.3.4.102680 (Aug 13 2009)
This is the newest PNA version that does not have the ability to geopcode contact POI's, but it is able to read the gccache.dat file created by the PDA version above AND it is capable of TTS. Install this version with the attached 102680sys.txt
You will need to install this version and simply place the gccache.dat into the iGO/save folder and iGO will do the rest for you.
Now getting iGO8 to reliably run TTS is a different story. TTS requires ALOT of RAM to run. If there is not enough RAM available (~115-120mb), then it will simply refuse to play TTS voice prompts and you will be stuck with standard voice prompts. To get your available RAM to acceptable levels you will need to disable TF3D, run CleanRAM, and then start iGO.
Sounds complicated? Well, fortunately itsachirpthing over at PPCGeeks has created a nice little script that does just this. The original post can be found HERE. And the original thread can be found HERE. I recommend reading both these original threads. They have additional information to get iGO8 working properly on TP2.
I have added this iGO script to the MortScript.cab posted here. You need it and CleanRAM.cab. Install both to the device, not the SD Card. Then just click on the Plain iGO Scipt icon in the Start Menu. The script will close TF3D, run CleanRAm, start iGO8, and when iGO8 is exited, it will start TF3D again
The sys.txt files attached are what works for my ATT TP2. It took many hours to find the correct setting for each iGO8 version and I am providing them to make your process easier. If they don't work or you get some other error for what ever reason... I AM PROVIDING NO TECH SUPPORT. This is simply information for your use.
Good Luck!
PS. This works best if you have two micro SD cards. One for each version of iGO. That way if you add new contact address, you can simply pop out one card, geocode the data, and transfer the new gccache.dat file to the other card.
Click to expand...
Click to collapse
i tried this and all i have to say is ............THANKS!!!! this is the missing piece to my tilt2...i have asked around and no one seemed competent enough to know what i was talking about until now...the 64029 sys text fixed my intial boot up problem and now IGO is good to go...thanks again. God Bless
thesilentnight said:
i tried this and all i have to say is ............THANKS!!!! this is the missing piece to my tilt2...i have asked around and no one seemed competent enough to know what i was talking about until now...the 64029 sys text fixed my intial boot up problem and now IGO is good to go...thanks again. God Bless
Click to expand...
Click to collapse
Your welcome. I am glad my searching, suffering, trial and error have been helpful to others. I felt it would have been a waste of effort, if only my phone was to benefit from the knowledge.
Added both NOPushInternet_v2 and SSK TP2 Dynamic Resource Proxy CAB's...
Need for maximum available free RAM.
lokmeup said:
Were you using the above mentioned iGO versions? If not... I wouldn't know.
Click to expand...
Click to collapse
Hi:
Yes I am using the above mentioned Aug 13th version, but to be honest I have had this same problem since I switches to the R3 versions. Oddly enough, I only get TTS from "Amy", which isn't even a TTS voice, but her voice is limited, and doesn't include things like street names etc... When I try to use "Susan" or "Dave" which are TTS voices, they do not work at all. I have tried a million different TTS packages, as well as sys.txt edits, and still no luck.
I have searched and searched and never been able to fix it.
But anyway, thanks so much for posting your info, I am sure it will help others.
cincy1020 said:
Hi:
Yes I am using the above mentioned Aug 13th version, but to be honest I have had this same problem since I switches to the R3 versions. Oddly enough, I only get TTS from "Amy", which isn't even a TTS voice, but her voice is limited, and doesn't include things like street names etc... When I try to use "Susan" or "Dave" which are TTS voices, they do not work at all. I have tried a million different TTS packages, as well as sys.txt edits, and still no luck.
I have searched and searched and never been able to fix it.
But anyway, thanks so much for posting your info, I am sure it will help others.
Click to expand...
Click to collapse
I recommend reading the threads on PPCGeeks. You might need their recommended BRANDING.ZIP and DATA.ZIP files.
I know it is a pain in the ass... but it can work
but then again it can also stop working right after
Good Luck!
Lokmeup, thanks for the post. I found this by googling Igo8 and contacts... I'm running iGo8 (the most recent pna version) on my Imagio and of course it won't input the contacts.
I plan on following your directions but was wondering if I'll need to keep both versions available and run the PDA version every time I enter a new contact as the PNA version won't import contacts?
I miss the 'navigate to contact' from Tomtom but Tomtom doesn't seem to like the Imagio as it lags out while iGo8 runs fine.
Thanks in advance!
lokmeup said:
PS. This works best if you have two micro SD cards. One for each version of iGO. That way if you add new contact address, you can simply pop out one card, geocode the data, and transfer the new gccache.dat file to the other card.
Click to expand...
Click to collapse
Yes, It is best to keep both versions.
lokmeup said:
Yes, It is best to keep both versions.
Click to expand...
Click to collapse
Thanks and DOH! Didn't see that part about the other card. The damn SD card on the Imagio is behind the back cover and the cover is a beast to remove. I'll try to keep one internal and one external and see if that works. Thanks again!
Update: iGO 8 v8.3.2.97313 (Jul 3 2009) also works for geocoding. You can have one in main memory and one on your SD card and the one in main memory will geocode for the one on the card.
Thanks again Lokmeup, you gave me back the one function iGO was missing over TT!
Not to be a nay sayer, but why in the world do you need to jump through all these hoops to get TTS to work? My TTS works fine on 102680 with Igo as installed, I'm using the Energy 6.5.1 ROM but it's worked with every ROM I've tried it on?
For all of us obsessed with flashing, a lot of chefs are adding Sense instead of just TF3D. Sense will also cause TTS not to work. I have edited the mscr to disable HTC Sense before launching igo8 (and of course renenabling it upon exiting the program)
Two versions:
One that closes Sense then launches igo
The second closes sense, runs clean ram then launces igo
Personally i hate havng to confirm the cleanup, but your choice. Either one works out for me
IMPORTANT: RENAME file extention .txt -> .mscr (xda does not permit me to upoad mscr files)
marscandybars said:
For all of us obsessed with flashing, a lot of chefs are adding Sense instead of just TF3D. Sense will also cause TTS not to work.
Click to expand...
Click to collapse
Unless I'm really confused Energy ROM Phoenix has Sense in it, and it works fine with TTS on my phone without any scripts.
marscandybars said:
For all of us obsessed with flashing, a lot of chefs are adding Sense instead of just TF3D. Sense will also cause TTS not to work. I have edited the mscr to disable HTC Sense before launching igo8 (and of course renenabling it upon exiting the program)
Two versions:
One that closes Sense then launches igo
The second closes sense, runs clean ram then launces igo
Personally i hate havng to confirm the cleanup, but your choice. Either one works out for me
IMPORTANT: RENAME file extention .txt -> .mscr (xda does not permit me to upoad mscr files)
Click to expand...
Click to collapse
rename this file and just run it like the cab file I presume ??
Its working with the Sense file. I just went out and try it out. Would you be able to create a Sense file you created for igo mortcript and the htc addicts clean ram v1.8. ? I can see the other file as a shortcut in the start menu? Would you be able to create the same one for the sense version ?
Thanks.