Database Users

SCROLLING THROUGH CONTACTS/PHONEBOOK ???

Anyone know how to skip to a name in the middle of my phone book, instead of scrolling through all the names. I have a 8125.
Thanks
JW

Er.. you should play around with your phone more
Assume yours is WM5 (maybe 2003 is the same, not sure)
(Method 1) The top section, you have a list of alphabets, just click on them to jump to the names that you are interested
(Method 2) If you click on the keyboard (or pen) on the bottom (center) bar, you will have your input method (e.g. the keyboard), simply punch in the name of the person you are interested in, and it will scan through all names and filter out the relavent ones for you.

or if you press and hold the scroll button for two full pages (eg through "A"), it should pop up with the letters of the alphabet B through to Z, this will give give you direct access to letter by letter.

combination of sim and phone memory
How can you make it so that the sim and phone memories stay in 1 alpabetical list rather then 2 separate list its quite annoying that they are split in 2.

move all sim to contacts, simple.
sim has no where near the functionality of contacts.

i have a question also mate
how can i list my contacts
name first last name 2nd
not last name first and name
thanks.

Edyhan said:
i have a question also mate
how can i list my contacts
name first last name 2nd
not last name first and name
thanks.
Click to expand...
Click to collapse
Use the CAB found in this thread:
http://forum.xda-developers.com/viewtopic.php?t=45664&highlight=first+last+name

Oh!! Is it possible to move all contacts from the SIM to the Memory contacts ? because I was adding each name from the SIM, I couldn't find a way to save them all at the same time. Please tell me how if it is possible.

Thomas1234 said:
Oh!! Is it possible to move all contacts from the SIM to the Memory contacts ? because I was adding each name from the SIM, I couldn't find a way to save them all at the same time. Please tell me how if it is possible.
Click to expand...
Click to collapse
yes use the sim manager in programs select all then use the menu option to move to contacts.

Edyhan said:
i have a question also mate
how can i list my contacts
name first last name 2nd
not last name first and name
thanks.
Click to expand...
Click to collapse
There does not seem to be a option for this on the device, but i got around it by changing it in outlook on my PC then syncing.
BTW, does anyone know how to hide SIM contacts so they dont show up twice in contacts?

dangerous_dom said:
Edyhan said:
i have a question also mate
how can i list my contacts
name first last name 2nd
not last name first and name
thanks.
Click to expand...
Click to collapse
There does not seem to be a option for this on the device, but i got around it by changing it in outlook on my PC then syncing.
BTW, does anyone know how to hide SIM contacts so they dont show up twice in contacts?
Click to expand...
Click to collapse
Kinetics helped me with this in case you missed it this is the link for the first and last
http://forum.xda-developers.com/viewtopic.php?t=45664&highlight=first+last+name

hanmin said:
(Method 1) The top section, you have a list of alphabets, just click on them to jump to the names that you are interested
Click to expand...
Click to collapse
I can't seem to click on the alphabet. is this just on certain versions or must it be on contacts? i currently have everything on SIM.

simon_darley said:
or if you press and hold the scroll button for two full pages (eg through "A"), it should pop up with the letters of the alphabet B through to Z, this will give give you direct access to letter by letter.
Click to expand...
Click to collapse
I tried that and it never goes to the letter I want. I also tried clicking on the group of letters at the top and it doesn't do anything. I don't want to have to go to the box and click on the letter i want to go to the name; I want to scroll through.
I am saving them to sim, does it need to be on memory for all these to work?

contacts management problems

hello, i'm confused as how to update a contact's phone number. i'd mainly like to update in both contacts and sim card. for example, John Smith changed his phone number and kept his email the same. i wish to update in the sim as well as automatically update in the contacts without manually going in and updating the contacts. so in the end i have to edit both sim entry and contact entry.
secondly i'm having problems with contacts switching from windows mobile2003. John Smith shows up in my contacts list as Smith,John so i can't search for him in the contacts list. i have to manually search for him in order to update his new phone number. any suggestions?
thirdly i can't create a new contact after i've added a new sim entry through contacts. it seems i have to load the Sim Manager application and wait while it loads sim entries in order to "Copy to Contacts"
any help would be greatly appreciated so i can streamline my work.
running: wizard (8125) with OEM rom

no solutions?

no one has a solution?

frostedglcok said:
hello, i'm confused as how to update a contact's phone number. i'd mainly like to update in both contacts and sim card. for example, John Smith changed his phone number and kept his email the same. i wish to update in the sim as well as automatically update in the contacts without manually going in and updating the contacts. so in the end i have to edit both sim entry and contact entry.
Click to expand...
Click to collapse
It's not possible to simultaneously update the contact's phone number in memory and in a SIM card, as far as I know. Shubaroo (see below) has a SIM manager that might make it a little easier on you.
Most people either use memory only (because they only have one phone and don't really care, like myself), or they use SIM only (because they change phones based on activity, like some people change shoes).
secondly i'm having problems with contacts switching from windows mobile2003. John Smith shows up in my contacts list as Smith,John so i can't search for him in the contacts list. i have to manually search for him in order to update his new phone number. any suggestions?
Click to expand...
Click to collapse
Wizards run Windows Mobile 5, not Windows Mobile 2003, so I don't know what else to say about that. Not sure what you're even asking, honestly.
As far as last, first vs. first last, I recommend "ContactFix" from www.shubaroo.com which is designed exactly to fix this.
thirdly i can't create a new contact after i've added a new sim entry through contacts. it seems i have to load the Sim Manager application and wait while it loads sim entries in order to "Copy to Contacts"
Click to expand...
Click to collapse
Yep. See my comments above. One, or the other. That's your choice, but you don't get both, AFAIK.
One last bit of advice: Ask ONE question at a time, and you're far more likely to get a response. It took me nearly half an hour to sift through this mess to form cogent answers. Most people won't bother.

number recognition

hello,
when someone calls my diamond II
it only shows the number of the caller, but not the name even though they are in my contacts how can i change this so it says who calles by name instead of number..
thanks for any reply

This sometimes happen if you have multiple entries of the same number....then phone shows only number and no name.....Is this happening for each incoming call..or just for few contacts...

for all contacts it happens, but most do have an mobile number and an home number..
can i change anything to fix it? or is it a fault on the diomand II .

Multiple numbers for same contact should not be a problem, but multiple contacts for the same number sometimes causes this....fr me it is working fine, so it should not be a TD2 bug..

pgu said:
Multiple numbers for same contact should not be a problem, but multiple contacts for the same number sometimes causes this....fr me it is working fine, so it should not be a TD2 bug..
Click to expand...
Click to collapse
all contacts have just one mobile number and one home number so i don't know where to search a solution
but thanks for your reply

Try to not use the prefix.
(+countrycode)
Should do the trick

this was discusserd once already (I think. I can recall the drop the prefix solution). Search a bit. alas, I will give you a link if I find one

Im having a similar problem. The caller id dosent work for some of my contacts, both when they phone me or when they send a SMS. Im sure they are saved in my phone and not on my sim and from what I can see there isn´t any difference from how they are saved in my phone book from the ones that the caller id works for. Its really strange and annoying. Hope someone has a solution for this problem.

Did you try just delete that contact and make it again. I know it's stupid question but ...

prdic said:
Did you try just delete that contact and make it again. I know it's stupid question but ...
Click to expand...
Click to collapse
yes i did. I also tested to make a new contact from the sms view with the option save contact with the actual number that shows instead of the name and it still didnt work. Thanks anyway.

Hey,
I've had the same problem since day of purchase. I did the reg edit to increase the numbers the phone looks at to identify a number but it still didn't work. I've also deleted and re-created the contacts with no success.

ALL,
I had this problem. I submitted the case to HTC Europe but I did not even get a call back after a few months had passed.
Unfortunately the only way to do this is to hard reset the phone.
You will loose all your phone data (contacts etc) but the files on your memory card will be ok.
When you reset the phone, even if you have NO contacts at all on your sim card, you still have to tell the wizard on the first boot to import your SIM contacts. This, for some silly reason, is the only way to get the phone to register the phone contacts from your phonebook, even if you are just using the non-SIM contacts.
I had no numbers on my SIM card and of course I did not select the option to import my contacts. I was going to do that myself via Outlook. Once I selected not to import the contacts, not one number was recognized.
I did a Hard Rest. If you have numbers or not on your SIM does not matter. Allow the initial start-up wizard to import from the SIM. Then continue.
This solved this VERY ANNOYING issue for me. I used SPB backup first to take a copy of my phone data before the reset.
- Geoff

i had this problem too, solution is change registry:
HKCU\ControlPanel\Phone\CallIDMatch:9(DWORD)
this means phone will identify number by 9 last digits - meaning its ignoring country code.
*if 9 not working for you try 10/11/12... one of these should fix.

bnm7bnm said:
i had this problem too, solution is change registry:
HKCU\ControlPanel\Phone\CallIDMatch:9(DWORD)
this means phone will identify number by 9 last digits - meaning its ignoring country code.
*if 9 not working for you try 10/11/12... one of these should fix.
Click to expand...
Click to collapse
hello
today I tried all the numbers, from 7 to 12
11 was the value that made me look some of my callerID. now I have the same problem, but not with everybody, but only some people
let's say a 50% of my contacts are shown on the screen when they are calling me/sending me an sms, but the other 50% doesn't show me the name but just the number.
today I tried with my mom's phone to call me. it didn't show the name. So i deleted her name from the contact, and added it again (from the missing call). now it's showing her name... Do I have to do it with all the phonebook?
is there something I can do to fix it? it's making me crazy

please help me..

I have, absolutely same problem, erasing the contact and creating it again, did not solve, very very strange. I've tried iterchange of numbers home>work, work>home, work> auto, home > auto, invane, some of contacts refuse to display name, compared the phones i have no same numbers for names ecc. First of all i have to mention that numbers have been migrated from Nokia 6230i via Outlook Express > Outlook > Phone , some of the numbers like Home, Bussiness Fax ecc, did not passed to Diamond 2

I've just noticed that a Hotfix was released a few days ago, which just might solve this problem.
Titled: Update for HTC Touch Diamond2 for Caller ID Display
I haven't tested it yet, so let us know if it works for anyone

try to make all contacts same format with TrineFix or similar app,
set numbers without country code, for example in israel i set 05XXXXXXXX instead of +9725XXXXXXXX, then i change CallIDMatch to 8.
this is how it works for me.

I had a problem with none of my contacts names coming up when they called me, it would only show their number. After x2 software resets and installing everything again I found the problem, when you do a software reset and you turn the phone on for the first time when it asks you to import from your sim card contacts DONT DO THIS if you sync your phone with Active Sync and outlook contacts as this is where the problem is.
If you import your contacts from your sim and you sync with outlook then your caller id's will not work.

save to contact list, but directs me to wrong contact list

Someone called me, and I didn't have that number, I wanted to save it to existing contact, but when I clicked on save to existing contact, none of my sim contacts appeared. There wasn't a way to get to it either. I load all my contacts directly from my sim. Is there a way to move sim contacts to phone? or save current number to existing sim contact?
thanks.

judicious said:
Someone called me, and I didn't have that number, I wanted to save it to existing contact, but when I clicked on save to existing contact, none of my sim contacts appeared. There wasn't a way to get to it either. I load all my contacts directly from my sim. Is there a way to move sim contacts to phone? or save current number to existing sim contact?
thanks.
Click to expand...
Click to collapse
Go to "Start/Tools/SIM Manager
The program SIM Manager is what you are looking for. (May not be in this exact directory but it shouldn't be to hard to fine. If not installed then just search for it here or on google)
When adding contacts from a call in that manner....it defaults to your phone...not your SIM
You CAN move all your contacts from the SIM to the phone by using the program listed above. Also you can use that same program to move them all back to you SIM if you so choose.

Default SMS Picture?

In the Messaging app when SMS Message are threaded it displays a picture from the person the message was sent by, and another picture that is next to the SMS that are sent by Me. In the CM6.1 ROM the default Picture is a Grey Box...
Is there anyway of changing this?

I wish, this bothered me SO much at first..

Handcent allows it in the settings fairly easily well worth the small price to support good product that enhances my customization.

In CM, go to Settings -> Call Settings -> Additional Settings -> My Phone Number and put in your phone number.
Then make sure you have a contact with the picture you want to see in your contacts list associated with the same number.
And presto, picture.

sleepykit said:
In CM, go to Settings -> Call Settings -> Additional Settings -> My Phone Number and put in your phone number.
Then make sure you have a contact with the picture you want to see in your contacts list associated with the same number.
And presto, picture.
Click to expand...
Click to collapse
This actually works...
Wish it would pull the picture from facebook like the original Slide ROM does, but at least the annoying gray square is gone..
Thanks for the help

sleepykit said:
In CM, go to Settings -> Call Settings -> Additional Settings -> My Phone Number and put in your phone number.
Then make sure you have a contact with the picture you want to see in your contacts list associated with the same number.
And presto, picture.
Click to expand...
Click to collapse
Hi guys. I am also having this problem, admittidly with an HTC Saphire. I can't find any way to input "my number" anywhere. In settings "about phone" it says, number unknown and is greyed out. Anyone know how on a Saphire. Then maybe this would also fix my SMS picture problem.
Cheers, just in case.
Steve

KoolAidJunkie said:
This actually works...
Wish it would pull the picture from facebook like the original Slide ROM does, but at least the annoying gray square is gone..
Thanks for the help
Click to expand...
Click to collapse
The only downside I've found is that the setting doesn't stick through a reboot (so you have to put your phone number back in after each one). Upon checking, there's a bug tracker issue for that problem on the CM bug tracker so *shrug* hopefully it gets fixed some time soon.

Solution.
There is another longer thread somewhere on this, and the solution works, I have just done it.
Basically the sim card needs to be programmed with "my number". On my Magic, when you go to about phone, it would say number "unknown". Magic doesn't allow you to change this. Put your sim into another phone; I ended up using my girlfriends Backberry; and navigate to additional settings, or whatever, until you find Sim Card actions. Then in there edit sim card to show your phone number in international format (+44(leave out 0)**********).
Once done, pop card back into your phone, and as long as you have a contact with your number and picture logged away, then voila.
Works on any phone that allows you to edit sim card.
Hope this helps.
Steve

sleepykit said:
In CM, go to Settings -> Call Settings -> Additional Settings -> My Phone Number and put in your phone number.
Then make sure you have a contact with the picture you want to see in your contacts list associated with the same number.
And presto, picture.
Click to expand...
Click to collapse
Madam*, I owe you a cookie.
*lol, couldn't find thanks so I clicked on your homepage...
Also doesn't need resetting after a reboot, however I had to reboot to make the pics stay after re-entering the messsaging app.