Related
I have done hard reset and soft resets and still my wifi is not connecting.
Finally my EDGE is working great but wifi not. Whenever I try to connect my SSID is set to "EMC Wireless Internal" channel 11. I have no idea where this cam from but I can not get rid of it. I have a new FIOS Actiontec router with wireless enabled to my network name, channel 10. And Hitchhiker tries to connect but it keeps getting bumped off.
I have gone into MediaNet and turned off the proxy and checked for it to go onto the internet on Cingular GPRS.
I have not had a problem connecting before on wifi. I wonder if the router is a problem here, or if my phone settings are screwed up.
And ideas?
Thanks
The WiFi - EDGE contengency
*The Bad News*
By default, if EDGE/GPRS is configured to work, WiFi is rendered useless.
You didnt mention what carrier you have. I have Cingular and they even state on there website that If you configure the Edge/GRPS to connect, then WiFi may not work.
*The Good news*
I have my 8125 working with both Edge and WiFi. Heres what I did:
1. Open Connnections and click on the 'ADVANCED' tab.
2. Click on 'SELECT NETWORKS'.
3. The top pull down should be set to 'MY ISP' or, if you have named your WiFi connection something different, select it here.
4. Click 'EDIT' under this pull down and set connection to 'AUTO PICK'. 'OK' back to Network Management screen.
5. The bottom pull down should be set to 'MEDIA NE'T.
6. Click on 'EDIT' under this pull down. This is where you will set up EDGE using your carrier's settings.
7. 'OK' your way back out. Your done.
These settings let WiFi try to connect first. If no WiFi is available then EDGE/GPRS is used.
Good Luck!
Thank you! Worked for me, but videos streamed from orb still aren't working
Wierd-Fi
I also have WiFi problems after installing HTC official upgrade
ROM 2.25.11.1 WWE
Date 5/11/06
Radio 02.25.11
Protocol 4.1.13.12
ExtROM 2.25.11.102
Everything is great except after successful connection to home WiFi it disconnects after maybe 5 to 15 seconds ... network becomes "unavailable" .. no error message. This happens even when not connected to CIngular EDGE/GPRS (flight mode ON then, individually enable WiFi ON for what that's worth). When I delete my home network WiFi entry to force a re-recognition and setup, it recognizes the wireless net just fine (again) but same behavior.
All my settings are already set as suggested by ralugniC8125 in this thread. I had not tried any of the other ROMs with added features/hacks/fixes found on this website ... would any of them behave differently, you think? PHone was bought from Cingular .. I have not done any unlock procedure (don't really need to from a service standpoint but will if necessary to make a new ROM work right).
Any thoughts appreciated...
tskelton said:
Everything is great except after successful connection to home WiFi it disconnects after maybe 5 to 15 seconds ... network becomes "unavailable" .. no error message.
Click to expand...
Click to collapse
I have just purchased an unlocked Tilt from eBay. I have been scanning the wiki for days now, along with other sources, and to no avail. I still cannot get my WiFi to work properly. If any one has had this issue and has found a solution, I would love to know it!
ok, here's a suggestion since none of you have mentioned it.
Diable the MAC (Media Access Control) Binding on the router. This should help.
Maybe yall can help me now I have it attempting to connect however it only connects to gprs and it even shows it has a great wifi signal
Still Wifi-less and Woeful
lobotomy said:
Diable the MAC (Media Access Control) Binding on the router. This should help.
Click to expand...
Click to collapse
Thanks for the suggestion. This did not help unfortunately. I should mention that I have tried to access several different types of routers... with and without security, and while they are showing up as being available, they will not stay connected for more than a second or two.
Any other possibilities?
Although the left-hand green led flashes, I'm not sure that WiFi is activating. I haven't been able to see any wireless networks, including my own when I was 2-3 feet from the router and WinCE still says it can't find the device and prompts me to turn it on. Has anyone else had this experience?
losborn said:
Although the left-hand green led flashes, I'm not sure that WiFi is activating. I haven't been able to see any wireless networks, including my own when I was 2-3 feet from the router and WinCE still says it can't find the device and prompts me to turn it on. Has anyone else had this experience?
Click to expand...
Click to collapse
You could try these:
This one just to see any networks around:
http://wififofum.en.softonic.com/ie/33768
and this one that does a few things in the connection process to save you finding where to put in some of the settings:
You need .net framework as well to use this but there's a link on the page for it as well:
http://www.kasuei.com/hitchhiker/
Regarding Win CE? Need more info.
Mike
normally i do so by going to the wireless adapter inside the network adapters control panel item. wish i can shortcut it
I have wifi in the house and it shows it at first as available and then flips to unavailable when in fact it is available since my laptop is wirelessly connected. it just keeps scanning and will connect to unsecured wireless routers around my area but will not connect to mine
Any insight as to how I could permanently have it connect to mine...It keeps saying scannig network and cycles from available to not available
similar activity
I have wifi at the office and at home. We use LEAP at work and I have WEP at home for security. the office wifi works pretty well. At home, I get kicked on and off about every minute or so. I haven't figured this out yet.
mikechannon said:
You could try these:
This one just to see any networks around:
http://wififofum.en.softonic.com/ie/33768
and this one that does a few things in the connection process to save you finding where to put in some of the settings:
You need .net framework as well to use this but there's a link on the page for it as well:
http://www.kasuei.com/hitchhiker/
Regarding Win CE? Need more info.
Mike
Click to expand...
Click to collapse
Mike,
WiFiFofum shows no activity when I run it.
Re: PocketWinC, I got the name wrong previously. More information about it can be found here: http://www.geekzone.co.nz/content.asp?contentid=3086 It makes it a lot easier to find wireless networks and connect to them. (legitimately! I'm not speaking of War Driving.)
When I run it, (I've used it successfully with other PPCs) I get the error message: "Unable to locate adaptor. If it was turned off, please turn it on now."
losborn said:
Mike,
WiFiFofum shows no activity when I run it.
Re: PocketWinC, I got the name wrong previously. More information about it can be found here: http://www.geekzone.co.nz/content.asp?contentid=3086 It makes it a lot easier to find wireless networks and connect to them. (legitimately! I'm not speaking of War Driving.)
When I run it, (I've used it successfully with other PPCs) I get the error message: "Unable to locate adaptor. If it was turned off, please turn it on now."
Click to expand...
Click to collapse
Well I think your right Wifi may be showing green LED but like you say it does not sound like it's activating. Have you tried a hard reset? If taht does not work then sounds as if you have a hardware problem.
That Pocketwinc looks interesting - similar to Hitchhiker by the looks of it.
Mike
8525 (Hermes TyTn)server assigned ip address frozen
Following an abortive attempt to connect to the (secure?) wlan at the local University , I now have an address "fe80::209:2dff:fee" locked into place in the field for "use server-assigned IP address" in the WiFi network adapter settings page. Consequently I can now connect to nothing with WiFI ( which had been working perfectly.) I would like to avoid a hard-reset - not even knowing if that will work. TIA
blane64 said:
I have wifi at the office and at home. We use LEAP at work and I have WEP at home for security. the office wifi works pretty well. At home, I get kicked on and off about every minute or so. I haven't figured this out yet.
Click to expand...
Click to collapse
Hi there!
today I finally understood why I'm having a similar issue like kicking off the network every minute. I managed to remotely restart the wireless router via _re_connecting my TyTN to the wireless network. It works as follows:
1. The WLAN router is working normally.
2. I turn on the WLAN on TyTN and it gets connected to the network. Everything works fine.
3. I press the power button to put TyTN in stand-by mode.
4. I press the power button to turn TyTN on. It tries to reconnect.
5. The router restarts.
At home I have a similar issue with a different router. It seems to restart on reconnection.
Why is this so? Is this a bug in TyTN or in router's firmware? Can it be corrected somehow?
The router is a DLINK DI-824VUP+ with, I guess, the most recent firmware.
The phone is original HTC TyTN with:
ROM 1.18.255.3
Radio 1.03.03.10
Protocol 32.34.7010.01H
ExtROM 1.18.256.9660
Egils
Has anyone on Verizon with a xv6800 gotten WMWifiRouter to work? I have tried and tried and still have no luck. I installed ICS like others have said and this has still not made it work. If anyone has a xv6800 and has WMWifiRouter working, please help me out with some directions. Thank you in advanced for your help.
Mod Edit: Moved from Titan Upgrading
I use it every day
So far you said that you installed ICS so that should be ok. Make sure you turn on your wifi before wifirouter, and you know it is right when the 3 simi circles stop flashing and stay lit and the message is 'connected to wifirouter ready'. If it is like that then it is working and the problem is that maybe the wifi on the other end needs to be told to look for ad-hoc connection, some will not see one by default. Ad-hoc is the mode it uses.
It says it is conected but also says it is searching for ICS and WLAN and it never connects.
make sure your WiFi switch is on
yep
NotLutzik said:
make sure your WiFi switch is on
Click to expand...
Click to collapse
That is what happens when the wifi is not working because it must bind with it. Go into your commanager and see what your wifi looks like and that the ad-hoc connection 'wifiminirouter' is there.
i was having the same problem. I uninstalled it, turned on the wifi switch then reinstalled it. I originally installed with the WiFi switch off and that apparently was the problem.
I got it. Thanks for your help everyone.
Okay, I have to ask since I haven't figured the program out. What does this program do? It allows a computer to connect to my phone via WiFi, while my phone is connected to the data network, thus giving my computer internet? I don't know.
Thats it exactly
whiteblazer01 said:
Okay, I have to ask since I haven't figured the program out. What does this program do? It allows a computer to connect to my phone via WiFi, while my phone is connected to the data network, thus giving my computer internet? I don't know.
Click to expand...
Click to collapse
You get a cookie ;-) and not only that but it doles out many ip addresses so anyone in range of your phone can share it's EVDO.
Sweet! I like cookies! This phone really is a magic phone.
I have to admit I was wondering if this was going to work.
I live in a 1x world up here in NW Arizona. Yesterday was a road trip to Vegas, Wife had the laptop and she surfed the net through the connection and then when we got to Vegas we hit EVDO and life was very good.
I think I am going to have to get a Amp with a good external antenna for better reception though.
But this brings up another possible situation as posted above others may intercept the wifi. But cruising down the road that should be a very remote hazard.
The only problem developed last night on the way home . It was searching for ICS like the switch was off. I verifed it was correct. Looked at settings and the wifi icon was missing in action. Soft reboot brought it back and life was good again.
Conflict with Exchange
I installed the program on my Verizon 6800. My phone puts out a signal, my computer recognizes it, gets an ip address and connects, but when I open internet explorer I get the "page cannot be displayed" error.
I do have my phone receiving push email from exchange server. I went into communications manager and turned that off, but still can't connect.
The wmwifirouter site mentions this problem, but I was wondering if anyone has had any success connecting?
Thanks!
do you have your wifi switched turned on BEFORE you open wmwifirouter? your computer will still connect even if the actual connection to the internet is not there. disconnect your computer from the network. close wmwifirouter (or just soft reset for good measure). turn on your wifi switch, then start wmwifirouter, then connect. if you're on a laptop, just shut off your wireless until wmwifirouter is connected.
Thanks for the quick response.
I followed your directions:
1. Soft Reset,
2. Turn on WiFi on phone,
3. Open wmwifirouter program,
4. Turned on wireless connection on computer.
Again, everything connects, but get the same IE error. When I select the wireless network in my office, my computer connects instantly.
In the wireless LAN settings on my phone, the configuration shows:
SSID: WMWifiRouter
Mode: Ad hoc
BSSID: 02-18-41-33-01-09
Tx Rate: Auto
Channel: 11
Signal Quality: Almost a full bar
This program would be absolutely awesome if I could get it to work!
WAR_GA said:
Thanks for the quick response.
I followed your directions:
1. Soft Reset,
2. Turn on WiFi on phone,
3. Open wmwifirouter program,
4. Turned on wireless connection on computer.
Again, everything connects, but get the same IE error. When I select the wireless network in my office, my computer connects instantly.
In the wireless LAN settings on my phone, the configuration shows:
SSID: WMWifiRouter
Mode: Ad hoc
BSSID: 02-18-41-33-01-09
Tx Rate: Auto
Channel: 11
Signal Quality: Almost a full bar
This program would be absolutely awesome if I could get it to work!
Click to expand...
Click to collapse
disconnect and reconnect to the network
Do you haveto run a custom ROM to use WMWiFiRouter or can you use Verizon's MR1?
wackychimp said:
Do you haveto run a custom ROM to use WMWiFiRouter or can you use Verizon's MR1?
Click to expand...
Click to collapse
You can Verizon's one
I have WIFIRouter and love it. The only problem I have is after using it on my laptop, I have to delete the connection. If I do not the computers (Dell) wifi will only search for my phone, and will not connect to the router in my house until its gone.
I know this is not a phone issue, but a computer one, buut thought someone here might know.
Thanks
Reinstall with WiFi on - Reboot require
I was also able to get my xv6800 to work (using an iTouch) using the above suggestions. I uninstalled ICS and WMWiFi, reset the xv,and reinstalled ICS and then WMWifi "with the WiFi switch" on - thanks for the help!
I noticed that when I reinstalled ICS with the WiFi switch on, it said the changes would take effect after I restarted the xv, which it didn't do when I installed it with the WiFi switch off..
I also had to turn on the WEP encryption rather than "None" to get it to work, although that might have been fixed if I'd just reset the iTouch.
Scrufdog said:
i was having the same problem. I uninstalled it, turned on the wifi switch then reinstalled it. I originally installed with the WiFi switch off and that apparently was the problem.
Click to expand...
Click to collapse
I've run into a very peculiar issue that I can't resolve. On my today screen if you have the Verizon Wireless network box enabled, my phone says "Wi-Fi: Unavailable", and no networks are showing up in the 'Configure Wireless Networks" menu. I've had this phone for 2 months using the same rom and radio for most of the time (DCD's 3.2.5, radio 3.42) and this issue just came up yesterday. I have a feeling it is related to me using WMWifiRouter and then removing the settings for all the networks that were saved in the "Configure Wireless Networks" menu.
Any help would be MUCH appreciated, I use wifi all the time on this phone.
I have the same problem. I thought it was my router but tried with others and still can't connect. It doesnt pickup any wifi signals. This is after I installed and tried to use wifirouter, even after unistall same problem.
Go to the wireless settings and at the bottom there should be a drop down menu make sure its set to all avialble and not only acces points (dont know if i spelled it right
I just looked at this and I have not been able to connect to wifi, thought there might be a problem with my phone. When I go to the wi fi settings and select all available it defaults to only access points. Any Ideas...
I am having this same problem as well. I would love to be able to use WiFi it's one of the reasons I bought the Titan. Someone please help us!
It could be related to you using WMWifiRouter as I have had the same issue. If hard resetting your unit does not fix the problem, you should swap your unit if it's still under guarantee. I had my first Titan's WIFI die on me (after one month) and I had to return it. Now I am on my second one over 14 months and now issues whatsoever.
Good luck.
I had to have my phone replaced as well as the hardware switch would not turn the WiFi radio on. Are you using a custom ROM or strickly stock?
Hi My Sprint Mogul has Ryan Moguls Light WM6.1 ver 1.5 light radio 3.42.02 and DCAAXAM-4350H . I like it but the main reason to have this device was to get on the free WiFi at work. It starts up and searches finds it connects then will say unable to connect. Other times it says can't locate page, Same with my home wireless. I just need a reliable WiFi device..
I had the same problem, I solved
I don't know if this can help since I have MetroPCS as carrier and I flashed a Sprint Mogul to make it work.
I had this problem and I couldn't get it work, but researching I knew was related with the internet setting, I couldn't get rid of the HTC_Guardian thing until I switch to Windows XP (I have Windows 7), only then I can setup all the internet & wap part as it should. (Start->Settings->Connections <Connections> in |Task| tab, Select Set up {my proxy server}, Check mark in both and <Advanced>, HTTP, WAP, Secure WAP & Socks for instructions & settings for MetroPCS see: [howardforums.com/showthread.php?t=1559514]).
Let me know it that works.
toggle off then toggle on your wlan AFTER it says it can't connect... works like a charm... gonna try remapping a soft key to the wlan toggle..
Intermittent wifi
mjmarket said:
Hi My Sprint Mogul has Ryan Moguls Light WM6.1 ver 1.5 light radio 3.42.02 and DCAAXAM-4350H . I like it but the main reason to have this device was to get on the free WiFi at work. It starts up and searches finds it connects then will say unable to connect. Other times it says can't locate page, Same with my home wireless. I just need a reliable WiFi device..
Click to expand...
Click to collapse
I have a Mogul with Ryan Moguls Cricket lite 3.1/ radio 3.42.40 and I have the same basic problem. Only occasionally will my Wifi connect or detect my Access point (about 15 feet away). turning WLAN on/off doesnt seem to help. I have used other 6800's in the same environment with wifi working perfectly, so maybe it's a hardware problem. (although I have two 6800's right now with similar symptoms)