Database Users

ONLY - Technical Support - ONLY

Disclaimer: As in every case your choice to flash any memory on your phone is YOUR decision and you run the risk of making a expensive Paperweight. Research Flashing and read post about new Rom's or Builds to learn from others mistakes.. There are a lot of risk takers here on XDA that will be glad to bite the bullet to help the community with rom stability and issues. But ultimately you CHOOSE to flash your phone Not us.
I created this thread for new users unfamiliar with Flashing and modding their phone to get technical Support for any technical Issue that comes up regarding the phone. However Please Avoid Posting things such as "I am bricked how do I fix" or "Help my phone doesn't Start up" Because they will not allow the more experienced users to Help you.
Suggestions:
1. List the following in the reply
- What Model Is your Phone (Should Be HTC Dream AKA Tmobile G1)
- What SPL are you using (Boot Holding Power + Camera then first line)
- What Recovery Image are you using(Stock, Jesus Freakes 1.42, 1.43 or HK)
- What Rom is Currently Loaded (Booted up go to Settings-> About Phone)
- What Radio do you have currently (Settings -> About Phone)
2. What are you Trying to do (Ultimate Goal)
3. What steps has you taken (In Detail please)
4. Once you problem has been resolved please Edit your Original Post indicating that it was resolved.
Thanks In advance for Keeping this thread Neat.
Some Reading Material for you:
APN Info Thread
General Questions Thread
G1 Wiki Thread
G1 Tips and Tricks Thread

jf recovery 1.43
doesnt seem like i need it because ive flashed beta 3 using 1.42 but i want it cause it has to have some capability that 1.42 doesnt right? Only problem is I have no idea how to flash it. I tried renaming the 1 in "haykuros hero rom" post to update.zip and it still said 1.42 when i went back 2 recovery. I dont use fastboot or adb or anything because I am a capital "N" noob and nothing seems to ever say how to do any of this stuff using a mac so.... that being said...can you help?
1. tmobile g1
2. haykuros latest spl
3. 1.42
4. ion
5. latest radio
goal: 1.43 recovery
steps taken: saw a lot of people ask the same question. searched. went back to the rooting thread attempted to enter the commands by pressing alt+x in the recovery console the way they were listed and placed the recovery.img file i unzipped from the hero thread on my sdcard. no luck.

build..?
I did my first fastboot recovery, even though I didn't need to. Pretty decent operation. Just wanted to get the feel of it. I think I'll be using nandroid and fastboot a whole lot in the near future
Goal: To either build myself, or at least play a part in the building of one sweetest ROM's. I guess i'll start small, with a theme.
(it's been a 12 pack of Mountain Dew and B movies kinda night.)

CC CEO said:
doesnt seem like i need it because ive flashed beta 3 using 1.42 but i want it cause it has to have some capability that 1.42 doesnt right? Only problem is I have no idea how to flash it. I tried renaming the 1 in "haykuros hero rom" post to update.zip and it still said 1.42 when i went back 2 recovery. I dont use fastboot or adb or anything because I am a capital "N" noob and nothing seems to ever say how to do any of this stuff using a mac so.... that being said...can you help?
1. tmobile g1
2. haykuros latest spl
3. 1.42
4. ion
5. latest radio
goal: 1.43 recovery
steps taken: saw a lot of people ask the same question. searched. went back to the rooting thread attempted to enter the commands by pressing alt+x in the recovery console the way they were listed and placed the recovery.img file i unzipped from the hero thread on my sdcard. no luck.
Click to expand...
Click to collapse
Installing JF Recovery 1.43 is just like any flash update for a rom...
You find and download the recovery file. Rename it to update.zip (Keep in mind that windows by default hides the.zip part so if you rename it to update.zip windows actually sees it as update.zip.zip.. This is a common problem.
Then Boot to SPL by powering off your phone and powering up with Home + Power Key.
Once loaded then hit Alt + L (If you don't have a modded Recovery already) and then If you have to wipe(which I usually do) Alt-W then you need to load the new firmware with Alt + S.
If all goes well it will load the new recover image and will reboot back into Recovery mode in which you just Home + Back to Exit and reboot.

I don't wanna step on anyones toes but I believe to load the new image after wipe it'll be alt + s....

Hero beta's
I've triend to install both Beta 2 & Beta 3 of the Hero build, but evertime it got to the setup screen it would force close. What can I do to get past this problem?

mvanwyk83 said:
I've triend to install both Beta 2 & Beta 3 of the Hero build, but evertime it got to the setup screen it would force close. What can I do to get past this problem?
Click to expand...
Click to collapse
With the beta 3 update update on your sdcard boot into recovery and wipe then flash then wipe again then reboot.
If you have a2sd already Use the adb recount Command and then adb shell to delete the system/sd/ folder.

Just a quick question:
I'm currently running
the Android 1.5r2 based Cyanogen build v3.3.1
1.43 recovery img
Hardspl
The latest radio update (the one with the I as the last character)
I would like to update to Haykuro's new bootloader to get more space and to be ready for the upcoming haykuro build, but I'm a bit scared by all the reports of phones getting bricked.
So my question is, if I install it using the update.zip on sd-card method, is there any chance of a brick?
Let me point out that I don't have a microsd card reader available, so I wont be able to flash the build I'm currently using right after updating the SPL. So far it's not entirely clear to me whether this can be a problem.
tia

Curunir said:
Just a quick question:
I'm currently running
the Android 1.5r2 based Cyanogen build v3.3.1
1.43 recovery img
Hardspl
The latest radio update (the one with the I as the last character)
I would like to update to Haykuro's new bootloader to get more space and to be ready for the upcoming haykuro build, but I'm a bit scared by all the reports of phones getting bricked.
So my question is, if I install it using the update.zip on sd-card method, is there any chance of a brick?
Let me point out that I don't have a microsd card reader available, so I wont be able to flash the build I'm currently using right after updating the SPL. So far it's not entirely clear to me whether this can be a problem. Tia
Click to expand...
Click to collapse
Before you consider flashing the new spl. Make sure you have a pvt revision board. Power + camera when turning on your phone. It will be at the top. If it says dvt don't flash.
You also need the 26I radio firmware.
If you do not have a memory card reader or a second memory card ten do not flash the new spl. Once you flash the spl, your phone will not boot until you flash a new Rom onto it
I believe this is correct. Anyone with experience care to confirm?

Actually now that I am rested and thinking straight.. Don't you load a recovery image by loading the recovery.img file on your sd card and booting to Bootloader?
Man I was sick and tired last night =)
Go to My Hero Thread and in the first post is the JF 1.43 Zip file you can use to Flash to JF 1.43 in update.zip format.

ubernicholi said:
With the beta 3 update update on your sdcard boot into recovery and wipe then flash then wipe again then reboot.
If you have a2sd already Use the adb recount Command and then adb shell to delete the system/sd/ folder.
Click to expand...
Click to collapse
Now is that process the same for Beta 4??

,
mvanwyk83 said:
Now is that process the same for Beta 4??
Click to expand...
Click to collapse
Should be. Can anyone confirm?

I put some music on beta 4. The album cover is in my pics but doesnt show where it should when playing music, do i need to somehow manually put it there?
Am I asking this in the right place even? thanks

1.
Tmobile G1
SPL: DREA100 PVT 32B
Firmware version: 1.5
Baseband Version: 62.50S.20.17H_2.22.19.26I
Kernel Version: 2.627-00392-g8312baf [email protected]
Build Number: dream_devphone-userdebug 1.5 CRB21147201 test-keys
2. Upgrade to the Dudes Build (http://forum.xda-developers.com/showthread.php?t=507151) and backing up all my data and apps
3. Tried to update (by naming his build update.zip and updating) and also tried backing up data using the commands in his post (listed above)

cronin4392 said:
1.
Tmobile G1
SPL: DREA100 PVT 32B
Firmware version: 1.5
Baseband Version: 62.50S.20.17H_2.22.19.26I
Kernel Version: 2.627-00392-g8312baf [email protected]
Build Number: dream_devphone-userdebug 1.5 CRB21147201 test-keys
2. Upgrade to the Dudes Build (http://forum.xda-developers.com/showthread.php?t=507151) and backing up all my data and apps
3. Tried to update (by naming his build update.zip and updating) and also tried backing up data using the commands in his post (listed above)
Click to expand...
Click to collapse
What errors did you get or what problems are you having?

stuck on android screen
hey guys, this morning i got the OTA cupcake update, and my phones been running fine all day, however, i just restarted it and its stuck on the android logo screen, it shows the shine going through the logo like it is loading but after a few seconds it stops, then does it again, is my phone shot? please, any help will be greatly appreciated

rschuman90 said:
hey guys, this morning i got the OTA cupcake update, and my phones been running fine all day, however, i just restarted it and its stuck on the android logo screen, it shows the shine going through the logo like it is loading but after a few seconds it stops, then does it again, is my phone shot? please, any help will be greatly appreciated
Click to expand...
Click to collapse
Wipe your phone. Press and hold home+power. Continue to hold it till youe see a caution triangle. Press alt+l and then alt+w when its done select reboot from the top of the list. Good luck

Quick Question
I am running the newest of everything, currently on Hero BUild 4
What actions should be taken to downgrade to the older SPL. I am getting extremely bad battery with this and can't handle it.

Mast3rmatt said:
Quick Question
I am running the newest of everything, currently on Hero BUild 4
What actions should be taken to downgrade to the older SPL. I am getting extremely bad battery with this and can't handle it.
Click to expand...
Click to collapse
From what I know, its a bad idea to downgrade your spl. Check you screen brightness and your screen time out if you are running an overclock program, try setting it to 384 max 128 min. Double check to make sure your screen actually times out. See if your wifi is running, as well as your gps. If you use twidroid change the rate from 5 minutes to 1 hour

i have to wipe my entire phone and loose everything now!!?

Bricked/Blind/Barely alive magic, no recovery screen (SPL ****up) any suggestions?

Hi
similar to an other thread here if tried to change my SPL
and never recovered.
I can still get the blue led going using TrackBall + EndCall buttons.
The orange led lights up when I connect the usb cable.
But I cannot see it from the pc in any way (adb/fastboot).
there is some life in it but not a lot, have not seen the screen light
up at all.
Would it be possible to get a new bootloader/spl on it? Perhaps using
some kind of automatic update mechanism that is build in using an
update.zip file on the sd card?
Any help is more than welcome.
abe

*bump*
hmm, post needs al least 10 chars... should be enough now...
Has everyone also drawn a blank on this?
abe

Try downloading the ruu from your phone's official reseller.

T-Mobile USA standard OS.
Assuming that you backed up using Nandroid or something to SAVE and STORE your originally packaged Android 1.5 (Cupcake) version from T-Mobile...you NEED to restore that properly using a recovery image. Amon_RA has a great one, so does Cyanogen, obviously by now I'm sure you're aware. But keep in mind, to get back to that state...you must be careful not to alter any necessary files on that standard OS.
Do some Google searching and try to track down a Cupcake 1.5 download from one of those sites that leaked it or something. That's your best bet. Right now you don't need to be worried about continuing on from where you are. You need to backtrack and begin anew.

Sorry to hear that. I was thinking of installing Haykuro Apps to SD ROM and it needs to change the SPL. But I think not worth taking a risk.
Can you tell a little bit more which ROM were you planning to install?
Which SPL did you update to?
Which ROM did you have at the time of SPL update?
Which thread or instructions did you follow if any?

Hi
@mrjunix
I have a google ion, and therefore cannot return it unfortunately to the
carrier, as there was none. I went to the Google IO conference but
I am back in Europe and there is not support here.
btw what do you mean by RRU??
@Reignzone
I do have a nandroid backup but I cannot get back into recovery mode,
or fastboot mode or anything... the pc does not recognize it either.
@technicolor
I installed the Cyanogen recovery image and was able to install
one of his rom's. It worked fine but then I wanted to install
a Hero rom and I wanted to update the SPL.
Used the cyanogen recovery to update the spl using an update.zip
file. the phone restarted the "android" update screen came on
briefly and it never came back on...
changing the recovery rom should not be an issue,
and normally I think you do not need to flash your spl at all any more.
you can do a lot with the fastboot mode and one of the recovery roms
mentioned by Reignzone
abe

Reignzone said:
Assuming that you backed up using Nandroid or something to SAVE and STORE your originally packaged Android 1.5 (Cupcake) version from T-Mobile...you NEED to restore that properly using a recovery image. Amon_RA has a great one, so does Cyanogen, obviously by now I'm sure you're aware. But keep in mind, to get back to that state...you must be careful not to alter any necessary files on that standard OS.
Do some Google searching and try to track down a Cupcake 1.5 download from one of those sites that leaked it or something. That's your best bet. Right now you don't need to be worried about continuing on from where you are. You need to backtrack and begin anew.
Click to expand...
Click to collapse
This is the same advise you gave me yesterday on my bricked MT3G, but if you can't enter recovery mode, a nandroid backup ain't gonna help much, is it?
Also, any cupcake downloads are not going to help either, if you can't fastboot or enter recovery.
I appreciate you trying to help, but if you pay attention to the OP (and my own post), you'll see that your advise isn't going to solve anything.

For starters:
My advice to have those of you who are in need to take an approach that allows you to backtrack you work. Perhaps you left out various details of your issue or process taken in order to end up where you're at.
Your bitterness isn't appreciated for my having misread the problem.
YOU are the one with the F***** device, not me.
Anyway, all that aside; you might try to read-up on various threads that could be of some help. Google search, HTC support, ADB, etc.
There's always something to be done.
Good luck.

abeman said:
Hi
@mrjunix
I have a google ion, and therefore cannot return it unfortunately to the
carrier, as there was none. I went to the Google IO conference but
I am back in Europe and there is not support here.
btw what do you mean by RRU??
Click to expand...
Click to collapse
forum puffering aside, RUU is ROM Upgrade Utility
Prepackaged programs that bypass the phone's software altogether to reflash the rom
My carrier is Rogers of Canada and I have their "HTC Magic" phone
Be warned that Rogers is intentionally altering their hboot to disable system changes, you may not be able to cook your os after using this rom update.
Their updates page
https://your.rogers.com/web_auth/techsupport.asp
has the update
http://downloads.rogers.com/wireless/products/htc/magic/RUU_Sapphire_Rogers_WWE_2.17.631.2_release_signed_NoDriver.exe

Rooting Mytouch3g 32b(t-mobile/voda) Without goldcard

Guide To rooting mytouch 3g 32b (Even if you have 1.6 update)
Propz to:Amon_RA, andreev2001, Cyanogen, and any one else sources I used
Ok after Searching the forums and finding all types of ways to root a Mytouch and having some/no luck I decided
to created a thread that goes into complete detail(or try to at least) about each step that is guaranteed to work if done correctly.
READ
This guide does not require a goldcard or adb . I am also not responsible for bricked/broken phones. Now since that's out of the way happy rooting!!
IF your phone is currently running 1.5(cupcake) already then skip to step 3
1.First of all we can't really do anything with 1.6 so we must downgrade to 1.5 by downloading this sappimg.nph and installing it
2.Once downloaded put it on your sdcard and reboot and go into hboot mode (Hold END+VOLUME DOWN). Preform the update
3.Once update is COMPLETLY finished and it asks you to reboot. Do so, then load your phone up fully and download this apk here (flashrecovery.apk) then run it.
Skip these steps and go to step 4 if you know how to install a apk
3a.to install this apk you have to enable the install unkown source in your settings. To do this hit menu >Settings>Applications>Unkown Soruces(check this).
3b. After this go to the market and download a app called "Astro" (the description should mention somthing about file manager) or you could use another apk installer but I prefer this one.
4. After installing the apk run it and click on “backup recovery image” let it do what it does then click on “Flash Cyanogen Recovery 1.4″.
5.Once that is done you want to download the SPL by clicking here, then put it on your sdcard. After that download any ROM(If you dont know what a ROM is search, I cant tell you everything ) of your choice and rename it "update.zip" without quotes then place it in your sdcard
6.Reboot your g1 and hold down the "HOME" key and it should bring up the flash image recovery screen. Choose apply any zip from sd and then choose "update.Engineering-SPL-HBOOT-1.33.2005-signed.zip". It finishes almost immediately with message saying successfully flashed(if it doesn't you prolly ate to much chicken ).
7. Then after it is installed select the restart option and then load into fastboot mode (Hold "BACK" arrow key while its restarting). Once fastboot is loaded the SPL info should say HBOOT-1.33.2005 (SAPP30000). If it does congrats almost there!!!!! If it doesn't, you did somthing wrong and you need to retrace you're steps.
8.Exit fastboot by hitting the "GREEN" button and before the phone boots up hold the "HOME" button and then go to "apply sdcard:update.zip". Let it install and VOL LA you installed your ROM. Preform a reboot and you will now have a rooted phone with a custom ROM

1) thanks for posting, ive tried to follow other instructions over the past few days to no avail
2) any chance of hosting the sappimg.nph file somehwere else? I cant access rapidshare from my phone. I would greatly appreciate it.

OMG SOOO EASY!!!! Mods should sticky this as the new root / rom upload process
I was running android 1.6 on tmobil mytouch 3g with perfected spl 1.33.2006

@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting

@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting

Thanks for posting - much appreciated. Can I ask what the benefit of changing the SPL is? Is this required?
My concern is regarding warranty - if I flash a new SPL, it is my understanding that I will not be able to flash my current one back, and hence return the phone to stock if the need arises.

ParanoiaPersonified said:
Can I ask what the benefit of changing the SPL is? Is this required?
Click to expand...
Click to collapse
Yes, it is required. You cannot root with the MT3G SPL, so you need to change the SPL.
ParanoiaPersonified said:
My concern is regarding warranty - if I flash a new SPL, it is my understanding that I will not be able to flash my current one back, and hence return the phone to stock if the need arises.
Click to expand...
Click to collapse
You can flash it back to the original SPL. You would then be unrooted. Look at Amon_RA's original rooting process with Gold Card. At the bottom, he gives directions on how to return your phone to the unrooted state in case you need to do that.

Thanks, I thought with one-click-root, once you'd got the recovery rom flashed, you were done - that you had root and could flash what you liked.
For the record, I'm Voda 32B, but have perfected SPL .0007.
[EDIT] Yes, that thread has a file to return to stock, but only for MT3G, which is why I am hesitant to flash a new SPL to my device.
I've still seen in lots of places mind, that suggest this process works without the flashing of a new SPL. Such as: http://www.ryebrye.com/blog/2009/08/16/android-rooting-in-1-click-in-progress/
[EDIT]

What happened to the ability to format and
and put partitions from the recovery? I just got another Mytouch and rooted it and no ability to put the partions from the recovery mode? I think I had version 1.2 and now I have 1.4

FenderGuy said:
and put partitions from the recovery? I just got another Mytouch and rooted it and no ability to put the partions from the recovery mode? I think I had version 1.2 and now I have 1.4
Click to expand...
Click to collapse
You still can, but not with the recovery img ur using wirch is cyanogen 1.4. Just flash amans new recovery img and you will be able to partion

4. After installing the apk run it and click on “backup recovery image” let it do what it does then click on “Flash Cyanogen Recovery 1.4″.
backup failed:I received that could not run command

cparekh said:
Yes, it is required. You cannot root with the MT3G SPL, so you need to change the SPL.
Click to expand...
Click to collapse
I have rooted my myTouch3G with the 1-click method (twice actually, needed to take it to the store), and I have the perfected SPL 1.33.2006.
The main issue with this SPL is that it does not allow you to use fastboot. As far as I know, this has nothing to do with root access.

Can confirm that I've performed the OP's procedure but *without* flashing a new SPL, and everything is working fine.
Now running CyanogenMod 4.2.2 w/ CM Recovery 1.4.

Does anyone have the link to the partitions recovery? I tried to put the Hero recovery on and it does not want to come on and I still show the Cyanogenmod v1.4 +jf....someone help
Also in the top it has Andriod system recovery (2)? I did it twice, how do i take one off?

kryptik06 said:
@ascis sure ill host the files on my website later (im not @ home right now)
@nonmindo thanks and i hope u had a easy time rooting
Click to expand...
Click to collapse
Any word on rehosting? I know its a pain but my phone is my only internet connection.

acis said:
Any word on rehosting? I know its a pain but my phone is my only internet connection.
Click to expand...
Click to collapse
here you go sorry for the wait
http://www.4shared.com/file/145083511/5ffeb21d/SAPPIMG.html

vodafone htc magic 32b gives error to ur method
error "update fail model id incorrect "
i think this sappimg is for the mytouch and not for htc magic vodafone. so it gives this error.
do you have any solutions for this.
thank you

kryptik06 said:
here you go sorry for the wait
http://www.4shared.com/file/145083511/5ffeb21d/SAPPIMG.html
Click to expand...
Click to collapse
Flashed last night, worked perfectly. I had no idea it was going to be this much faster. Thankyou.

I am looking for a rom that has a wifi tether app!
yes I am to the step where u download a rom and I am looking for a rom that has WIFI TETHER for my laptop...
much will be appreciated if u can help=D
- THANKS

well i guess right now i just want my phone rooted...
i just want a rooted phone cuz i can download a wifi app i just need a rooted phone....thanks for your post though....much much much much appreciated...nice and simple...other post or vids ive seen go to far in to detail about it and i forget what step im on .lol
-THANKS

Rogers magic update freeze/brick

Hello all,
As many of you know Rogers issued an update for 911 issues and sense ui just recently, unfortunately as I attempted the update via SD card method, the first update seemed to have gone well but after once it wanted to reboot it keeps on splashing the ROGERS over and over.
I'm thinking this is most likely because I am rooted and the process just didn't agree.
I am currently running amon ra's 1.2.3 rec. img
with amon ra's 1.6 rom
32A motherboard
BTW I still get to boot when I hold end+vol down
and when I hold end+home I get amon ra's screen but is quickly taken away after a few seconds.
Any help would be much appreciated.
___________________
EDIT:
For the record I think I know the issue, just don't know how to fix it.
You see, instead of getting this:
fa rm5.static.flickr.com/4046/4298577978_f3366c55ae.jpg
(wouldn't let me post a link as I am new)
after "parsing...[SD ZIP]"
I only got
[1] BOOTLOADER
[2] RADIO_V2
help?

good news and bad news.
good news, im pretty damn sure thats not a brick as you can still get into fastboot (the vol down + power)((atleast thats what i think fastboot is))
bad news, i dunno how to fix it.
i know theres a way to revert to original stock ROM via fastboot, so im sure it is fixable. don't know about custom ROMs via fastboot.
bed time, though. good luck, man, and dont get bummed cause im 99% sure you aren't just plain ****ed.
edit: just noticed screenie, but can't see it because my girlfriends retarded wanna-be stepdad decides to look at pr0n all night and continues to install "mywebsearch" **** and i can't get to it. :/
Hopped on my mytouch, still think your good but let someone else who knows more vertify that.

another option
one other thing you can do,
go to a rogers store, and tell them you tried applying the so called essential upgrade 'b/c you care about your safety' and the '911 issue is a important fix'. tell them you recieved instructions to do w/e it is using the SD card method.
basically, you tried the update ---> phone got messed up.
i know someone else did it and it was grounds for them just giving you a new phone.
not saying 100% it'll work, but its worth it b/c you get a new device with the new ROM on it if it does.
goodluck.

cdstewart said:
I attempted the update via SD card method
Click to expand...
Click to collapse
Can you clarify which SD card method? Was it using the official DREAIMG.nbh from Rogers?
I thought that I had bricked my phone because I went for a hail mary attempt to root my phone. But unfortunately it wouldn't get past the Rogers screen.
However, after talking to a CSR, they sent me a link to the Windows 7 file and it rewrote everything back onto my phone and I was able to boot it normally again.

@r3s-rt
Ya, thanks. I figured I wasn't completely boned.
@mbk.2k3
I thought about that but when I go home+end you can see I'm using amon ra, which would mean they know I rooted and therefore void my warranty
@dotster
This is the method,
Upgrade Instructions for Rogers HTC Magic
Requirements:
Rogers Magic
Battery Level of 50% or more. Do not start upgrade if battery level less than 50%
MicroSD card formatted in FAT32, please note cards formatted in FAT will not work.
Installing the Update via MicroSD Card:
Part1
The first part will prepare the device for the actual update but will not upgrade the Operating System, the upgrade itself will be performed in Part2.
1) Download the HTC_Magic_Update_File1.zip and extract the file within, SAPPIMG.zip to the root of the memory card in this form, do not extract it’s contents and please do not change the file name.
2) Backup your personal data: All personal data (contacts, applications, photos, bookmarks, etc) stored on the device will be lost after the update process. There are also 3rd party applications on Android Market place to back up your applications and personal data.
3) Power off the device.
4) Remove the existing microSD card from your device (if there is one already installed), press in on the microSD Card to eject it and then remove it from the slot.
Insert the microSD card with the SAPPIMG.zip on it in the microSD slot, slide it into the slot until you feel a “clickâ€.
5) Press and hold the Volume Down Button and the Power buttons until the display turns white.
6) The update will begin installing, please follow any onscreen instructions, press the trackball when prompted to press “Actionâ€
7. Once the update is complete, “Press Action to Complete†will be displayed on the screen, press the TrackBall for the device to reboot and complete the first part of the upgrade process.
8. Power off the device to prepare for the step 2 below.
Part 2
Upgrading the device.
1) Delete the SAPPIMG.zip from the microSD card
2) Download the HTC_Magic_Update_File2.zip and extract the file within, SAPPIMG.zip to the root of the memory card in this form, do not extract it’s contents. Please do not change the file name.
3) Follow the same instructions as in Part 1 - step 3 TO 8.
4) Delete the SAPPIMG.zip file from the card.
Click to expand...
Click to collapse
Keep in mind this is magic and not dream
Thanks for the help guys.

cdstewart said:
Hello all,
As many of you know Rogers issued an update for 911 issues and sense ui just recently, unfortunately as I attempted the update via SD card method, the first update seemed to have gone well but after once it wanted to reboot it keeps on splashing the ROGERS over and over.
I'm thinking this is most likely because I am rooted and the process just didn't agree.
I am currently running amon ra's 1.2.3 rec. img
with amon ra's 1.6 rom
32A motherboard
BTW I still get to boot when I hold end+vol down
and when I hold end+home I get amon ra's screen but is quickly taken away after a few seconds.
Any help would be much appreciated.
___________________
EDIT:
For the record I think I know the issue, just don't know how to fix it.
You see, instead of getting this:
fa rm5.static.flickr.com/4046/4298577978_f3366c55ae.jpg
(wouldn't let me post a link as I am new)
after "parsing...[SD ZIP]"
I only got
[1] BOOTLOADER
[2] RADIO_V2
help?
Click to expand...
Click to collapse
I had the same problem while installing the new update yesterday. I had to call Rogers to guide me through it and even he couldn't figure it out. My phone just kept rebooting over and over after installing the first update. Even in recovery mode it didn't give me a chance to wipe, flash or restore anything because it would reboot in a matter of 2 seconds. The tech support guy on the phone had no idea what to do. I finally realised that I had a seperate Mini SDcard USB adapter that I could put my SDcard in and then plug into the USB. That allowed me to access my SDcard so I was able to delete the first SAPPIMG and then put the new SAPPIMG from the second update onto the SDcard. I repeated the same process from the first update (I was able to access fastboot without it rebooting), everything installed perfectly and now the phone is up and running great. If you don't have a Mini SDcard to USB adapter I'd suggest picking one up at your nearest Electronics store. I believe I picked mine up at BestBuy for $35 which came with a 4gb class 4 SDcard. The adapter is so small that it actually sits on my key-chain. Hope this helps.
Rogers Magic
Radio: 6.35.10.18
SPL: 1.76.0010
(unrooted)

cdstewart said:
@mbk.2k3
I thought about that but when I go home+end you can see I'm using amon ra, which would mean they know I rooted and therefore void my warranty
Click to expand...
Click to collapse
if you're desperate it's worth a try. maybe it's just my personal experience with them but i have a feeling most of the rogers reps/techs wouldn't know/care enough.

@FoTwoZero
Thanks that sounds just like mine.
I'll give it a shot.
Were you rooted before?

cdstewart said:
@FoTwoZero
Thanks that sounds just like mine.
I'll give it a shot.
Were you rooted before?
Click to expand...
Click to collapse
I was rooted before, this is why I'm sure I've had the same problem as many of you. It seems though that this issue doesn't just stop at us... This issue has been happening with many other carriers and I'm not sure why (as of yet). I've flashed dozens of other Sense ROM's and even ROM's without Sense for ei. Espresso and Eclair and they all worked fine before. This new Sense ROM from Rogers is fantastic. So try what I did and you should be on your way with no issues.
Now if only we can root this damn phone.
Rogers HTC Magic (32A)
HBoot - 1.76.0010
Radio - 6.35.10.18

Chynkinese said:
if you're desperate it's worth a try. maybe it's just my personal experience with them but i have a feeling most of the rogers reps/techs wouldn't know/care enough.
Click to expand...
Click to collapse
After the update your phone won't be rooted anymore, therefor your warranty will still be in effect. After flashing the first update it already changes your SPL and Radio therefor Rogers wouldn`t know if you were rooted prior to the update. If you stuck in the boot loop just follow my instructions and you will be home free.
Now if only we can root this damn phone.
Rogers HTC Magic (32a)
HBoot - 1.76.0010
Radio - 6.35.10.18

@FoTwoZero
Just did what you did and I'm up and running!
Thanks
I think they did misname the updates though.
Because in the instructions given, and picture above correspond to the 2nd zip file.

cdstewart said:
@FoTwoZero
Just did what you did and I'm up and running!
Thanks
I think they did misname the updates though.
Because in the instructions given, and picture above correspond to the 2nd zip file.
Click to expand...
Click to collapse
Happy to hear that I could help. They did misname the files but how could you blame someone who goes by the name of Rogers. I have several services with them and it's nothing but headaches with them.
I'm sure it was a rushed update as well. The devs at HTC were probably pressed for time to get this update up and out the door within a couple of days. Rogers will possibly be a major distributor for them in the next upcoming years.

Thanks a lot!
That solved it.

Anyone been able to root this ROM yet..?? I have tryed everything and I just keep semi bricking my phone.. but I can always recover it.

[Q] Desperate for some advice: cant update OTA or with update.zip

Hi
I've been hammering at this problem for weeks now and its really frustrating. I'm hoping someone can help me out here.
I cant get my phone to update to Froyo. I'm dying to see if the update wil fix my missing wifi issue that I picked up with the last update.
Currently I'm at:
Firmware version: 2.1-update1
Baseband version: 47.26.35.04u_7.05.35.26L
Kernel version: 2.6.v29-e3993620 htc-kernel(at)and18-2 #1
Build number: 2.06.709.3 CL193617 release-keys
Software number 2.06.709.3
The phone is unbranded, bought in China. I'm not sure if it was tampered with.
My phone picks up the OTA update:
OTA_Legend_Froyo_s_hTC_Asia_TW_3.15.709.3-2.06.709.3_release_160364d6o5a2er5k3kbifl
this fails on install, red triangle at about 25%
Tried doing it manually:
renamed above file to update.zip and copied to root of SD card
In HBOOT there is an error something about "legedimg" missing flashes up
Selecting recovery mode gets me a red triangle
pressed (power+vol up)
gets me into system recovery, there is a warning at the bottom "Can't open >cache >recovery>command
selected apply sdcard:update.zip, it works for a little while
get a bunch of stuff about "ro.cid" and and finally "HTC__621". "error in >sdcard >update.zip" (status 7)
Also fails.
Can anyone tell me what's going on here? HTC support has been useless. I'm now really stumped. Do I need a goldcard?

Hi! Yes, you need a goldcard because of the different CID you have and the update.
You may look for an update for your CID.
Why not root it while you're at it?

Thanks!
What is a CID? Is this not the correct update for my phone?
Are you suggesting that if I find the correct update I wont need goldcard or root?Where might I look for an update that matches my CID?
Since I'm on a mac, and dont have easy access to a PC rooting and goldcarding is a bit of a pain...

CID is Carrier ID, a number that locks your phone to carrier-specific firmware...
And yes, you need an update for your CID, then you don't need GC...

thanks. so do I have this straight:
1. My phone is locked to take only carrier specific firmware (even though its not actually sim-locked since I can use any sim I want) Sooo... "debranding" wont actually help
2. an update with the correct CID would work - though I dont know which one I need.
3. a goldcard would let me install the latest update via update.zip despite the CID issue
When I spoke to HTC support they said something about my phone originally belonging to Vodafone Germany. It was strange since I definitely have the chinese version loaded. I could try loading the vodafone germany update but then wont my phone become sim-locked again?
Am I getting this right? Thanks you have been a great help!

1. SIM lock and CID lock are two different things...
2. Yes, if the HTC said Voda Germandy, they're probably right...I presume you have purchased it from someone who used it before?
3. Of this I'm not sure, but It wil definitely help you root your Phone...
If you don't want to root, you can try to find an RUU upgrade - that's and app that will upgrade your phone from PC - try www.shipped-roms.com. But again, you need one that matches your CID.
edit: If you flash the RUU, rooting will be harder

Dr.Romca said:
1. SIM lock and CID lock are two different things...
2. Yes, if the HTC said Voda Germandy, they're probably right...I presume you have purchased it from someone who used it before?
Click to expand...
Click to collapse
Eemm, no. It was "new". They probably did something dodgy to keep the price down. Somehow, despite the CID issue, they were able to install the chinese firmware. It doesn't make much sense.
Dr.Romca said:
3. Of this I'm not sure, but It wil definitely help you root your Phone...
If you don't want to root, you can try to find an RUU upgrade - that's and app that will upgrade your phone from PC - try www.shipped-roms.com. But again, you need one that matches your CID.
Click to expand...
Click to collapse
As far as I can see the latest for Vodafone Germany is "RUU_Legend_Vodafone_AT_GER_Mobilkom_1.31.177.3_Radio_47.26.35.04_7.05.35.26L_release_126862_signed.exe"
I dont think this is actually Froyo?
That might mean that a goldcard is the only option. I take it the goldcard would essentially allow me to bypass the CID check and install whatever update I wanted?
I tried to install the latest vodafone version via update.zip on the SDcard, no luck, "assert failed"... status 7...

Sorted!
Well, I managed to sort mine out and upgrade to Froyo. And I got my WIFI back too!
Very simple...
1. Create Goldcard: Droid Den - Android Guide: How To Create a Gold Card
2. Install RUU (Legend Froyo WWE): Index of /shipped/Legend/
Worked a treat and was actually very simple using the goldcard helper app they recommend on that post. You need access to PC.
I tried updating using update.zip through recovery but that didnt work.
Phone is now working 100%.
I suppose issues might come up when I try to update next time OTA (if there is another OTA for legend), but worse case scenario I will have to use another RUU.

glad it worked out for you... can't imagine going trhough the stress
that's why im waiting for the Official OTA

Good it worked
@Qksi1ver: why are you waiting for OTA?If you root now, you have a shot at S-OFF, If you update your HBOOT, you wont be able to S-OFF...just sayin...
Sent from my HTC Legend using XDA App