Related
I have a MDA Vario. In SETTINGS --> TODAY --> ITEMS tab, what is "Today timeout", which is set at "4 hr" by default?? Does anyone know pls? I do not see any reference to it in the manual. Thx.
Tones
I think that's the amount of time after which it will return to the today screen if you left it with an app open and didn't touch it.
i tried it last night by leaving a game running, but it was still there when i got up the next day. it does seem to be the function u described, mate. Anyone else have any ideas pls?
A game will certainly work differently as it will request permanent focus and fullscreen. Just try with a standard app like calendar...
well, it was only a simple solitaire card game, but nonetheless I will try standard one like you suggested. But if this "timeout" function really is to return to TODAY screen, what is the real use of it? to timeout in 4 hours? and the longest possible time option is 12 hours.
Doesn't it simply stop refreshing the today screen (ie the clock and other values)?
It still refreshes the clock when you put it into sleep mode. However, after a number of hours it always takes some time for the clock to jump to the correct time.
It is the idle time before the Today screen is shown.
It's near useless, I almost always keep my today screen on anyway, because who wants to wait 4hours to see it
Use my TodayButton app if you want quick access to the Today screen...
V
personally, I always return to the TODAY screen anyway by shutting down applications after i'm done with them. I just thought this "timeout" thing was a sophisticated and useful function, but it turns out to be quite the opposite. But i will never understand why anyone want to design it to timeout in HOURS and not in minutes.
I'm the same, I shut down apps and always leave it on the Today screen!
V
vijay555 said:
Use my TodayButton app if you want quick access to the Today screen...
V
Click to expand...
Click to collapse
Doesn't the Red button do that anyway?
Nah, red button minimises apps to leave them running in the background (I think it actually just switches to the today screen). Some don't mind this, but for me, if I want the app open, I'll open it, and when I want it closed, I want it closed.
VJOkButt allows you to use the red button to minimse or close, and also properly close the phone to save around 3mb memory. But it does this sympathetically with the phone, so if you're in the phone, it hangs up, but otherwise it's a minimiser.
V
lolz
Morale of the story.... no one knows it. I always keep it disabled. So no big deal.
Had PDF softcopy of Reference Manual of my O2AL, and searched with no hint at all. Lets be it.....
I thought...
Guys,
I just stumbled upon this thread and thought it might be a good idea to get educated. I never knew it.
But this is what I thought - I thought it is the time slot to show appointments.
Means, if you chose a slot of 4 hours, and there are continuous meetings scheduled in your calender (and display of them enabled), then it would act like a rolling 4 hours window (read as slot).
Does this make sense? I never had so many appointmens, but always thought this was the use of it.
Comments please.
Source Code Finally Posted...
Sorry it took so long to post the source. I haven't been monitoring this thread for some time due to other time demands. A recent email reminded me that I promised to release the source, so here ya go...
Release 6 Notes Below...
About a week ago, I was looking for an app that would lock my wizard when it came out of suspend. I use a bluetooth headset for all my calls, so I rarely remove my phone from its carrier. However, while talking, I tend to move around and frequently the hang-up button would be pressed resulting in a disconnect.
Frustrated, I looked at a few apps. I really like the "Slide to Unlock" feature in the iPhone-like app S2U. It more or less suited my needs. However, my bluetooth headset wouldn't work with S2U installed.
Thus I set about writing an app that would "lock" the phone whenever it came out of suspend mode. The result is the app, LockDown, attached to this post. Once run, LockDown sits in the background waiting for "resume" event. At this time, it locks all keys and prevents any stylus events save one - a "Slide right to unlock" slider control. As with S2U, once the thumb tab is slid all the way to the right, the keys are unlocked and the unit once again responds to the stylus. Also note that LockDown only takes up 5k of memory.
LockDown has been tested on TNT.1933 (WM6) for the Wizard. It's compiled as a PPC 2003 app, so in theory it should also work on WM5 and any PPC 2003 devices. I've tested it with my Visual Studio WM5 and PPC emulators, and it worked fine. However, it couldn't test it on the real deals.
It's a new app. While I'm not experiencing any problems, please consider it beta for now. As such, don't wire it up as an auto-start link until you've run with it awhile and are certain it works as advertised. For now, I suggest just copying it to your \windows folder and linking to it there. If you have any problems, please report them, and I'll address them ASAP.
Release 6 Notes
The slider bug was fixed.
The Message option was fixed.
Application Invocation
Lockdown [-lock] [-close]
With the -lock parameter, the application starts in lock mode.
With the -close parameter, the application is removed from memory (if running).
Registry Options in Folder \HKEY_LOCAL_MACHINE\Software\Lockdown\Slider
Position (DWORD, 0):
If set to 0, the slider is centered.
If > 0, the slider is positioned X pixels below the "Top Taskbar".
If < 0, the slider is positioned X pixels above the "Bottom Taskbar".
Padding (DWORD, 2):
Pixel offsets for slider arrow from the left and right edges of the slider window.
Message (String, "Slide right to unlock.")
The text message displayed in the slider window.
TextColor (DWORD, 00FFFFFF hex):
Color of slider message. Note that the HEX color format is 00BBGGRR where BB is blue, GG is green, and RR is red.
FontPoint (DWORD, 16):
The font size of the slider message.
PenColor (DWORD, 00F04050 hex):
Color of the slider arrow.
BackgroundColor (DWORD, 00CCCCCC hex):
Color of the slider background.
WidthMultiplier (String, .92):
Must be a floating point value. Multiply this value with the lesser value of the desktop height or width (in pixels) to determine the slider width.
For example: If the desktop display is 240 by 320 and the WidthMultiplier is 0.9, the slider width is 216 (240 X .9) pixels.
HeightMultiplier (String, .22):
Must be a floating point value. Multiply this value with the lesser value of the desktop height or width (in pixels) to determine the slider height.
TabWidthMultiplier (String, 1.5):
Must be a floating point value. Multiply this value with the calculated slider height to determine the width of the slider arrow.
Note that the height of the arrow is always equal to the height of the slider.
EnableAnswer (DWORD, 1):
If set to 1, the answer button is enabled during an incoming call period (while the phone is ringing).
If set to 0, the answer button is always disabled.
EnableIgnore (DWORD, 1):
If set to 1, the ignore button is enabled during an incoming call period (while the phone is ringing).
If set to 0, the ignore button is always disabled.
After the installation, only the Position key will be present in the registry. I figure that most users will only tweak this value.
To modify the other parameters, add the appropriate keys with the defined types as shown in parenthesis. The default values are also listed in the parenthesis.
If you decide to tweak these parameters, please remove any shortcut to Lockdown from the StartUp folder. While I've taken steps to prevent "bad" values in these parameters, I still suggest this precaution.
Please note that Lockdown must be terminated and restarted before any changes to registry settings take effect.
As always, if you have any issues, please let me know.
W James
Very Great app...im sure many will find it useful
Does not work on my CDMA Touch
Tried it out but does not run on my CDMA touch.
It work for me on Hermes With schaps wm6 Ver 4.30
thanks.
WJames said:
Greets.
About a week ago, I was looking for an app that would lock my wizard when it came out of suspend. I use a bluetooth headset for all my calls, so I rarely remove my phone from its carrier. However, while talking, I tend to move around and frequently the hang-up button would be pressed resulting in a disconnect.
Frustrated, I looked at a few apps. I really like the "Slide to Unlock" feature in the iPhone-like app S2U. It more or less suited my needs. However, my bluetooth headset wouldn't work with S2U installed.
Thus I set about writing an app that would "lock" the phone whenever it came out of suspend mode. The result is the app, LockDown, attached to this post. Once run, LockDown sits in the background waiting for "resume" event. At this time, it locks all keys and prevents any stylus events save one - a "Slide right to unlock" slider control. As with S2U, once the thumb tab is slid all the way to the right, the keys are unlocked and the unit once again responds to the stylus. Also note that LockDown only takes up 5k of memory.
LockDown has been tested on TNT.1933 (WM6) for the Wizard. It's compiled as a PPC 2003 app, so in theory it should also work on WM5 and any PPC 2003 devices. I've tested it with my Visual Studio WM5 and PPC emulators, and it worked fine. However, it couldn't test it on the real deals.
It's a new app. While I'm not experiencing any problems, please consider it beta for now. As such, don't wire it up as an auto-start link until you've run with it awhile and are certain it works as advertised. For now, I suggest just copying it to your \windows folder and linking to it there. If you have any problems, please report them, and I'll address them ASAP.
W James
Click to expand...
Click to collapse
hi WJames,
any screenshots of your app? it sounds very usefull, but how does it look
like?
today plugin s2u
it was a dream cam true if was a today plugin, to the left...lock, to the right ...unlock, but in the today,
I use my standard windows lock today plugin, without the lock buttons, so when i touch any buttom , the backlight goes on (to see the clock and appointments in one clic).
today plugin s2u is the rigth way.
great work
red.schumi said:
hi WJames,
any screenshots of your app? it sounds very usefull, but how does it look
like?
Click to expand...
Click to collapse
as he said...it sits behind the screen..and waits for the resume event
Here's a screen shot as per request. It's very plain jane. I wasn't looking for the beauty of something like S2U. I merely wanted a functional app that didn't take up much real estate (5kb).
Once it's gone through the paces and looks to be bug-free, I'll release the code and you can tweak to meet your needs.
It gives a black screen with white text in the center of screen saying "Slide right to unlock." There is a box with a plain white slider. You cannot see your today screen.
edit: Sorry, had the page open while I tested it and did not notice your reply before posting.
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
To each his own, but i run S2U2 because it allows me to operate my phone via bluetooth while the buttons are locked. The builtin lock doesn't let me do that.
perasite said:
To each his own, but i run S2U2 because it allows me to operate my phone via bluetooth while the buttons are locked. The builtin lock doesn't let me do that.
Click to expand...
Click to collapse
Hmm, never had that problem with bulit-in lock. Yes, to each their own. I've installed/uninstalled S2U2 soooo many times. I love the app but end up finding that it serves me no real purpose (other then eye candy) and it gets uninstalled. New version comes out, installed for a about 3-4 hours, then uninstalled again.
Very Nice...can i Request something?
Hi
Thanks for the nice application
very small, problem free so far (on Eten M700 with WM6) & useful
Can i have 3 requests please:
1- can you make the slider spring back to the left if it was accidentaly moved to the right, right now it stays half way & i think if you make it spring back it will be more safe as a lock & it will look better too
2- can you make the slider button wider (double) so i can catch it with my fat fingers
3- can you add an icon, so i may put it in my today launcher list & it would look better than the plain white square, something like a lock or key or a hand can do.
I also noticed that sometimes as i come out of the suspend mode, the slider is either late to appear (1-2 sec) & may remain unresponsive for two or three trys to slide it to right (stays in place)
Once started i couldn't figure how to get rid of it & seems that only way is to soft reset to go back to normal wake up without locking
Hope these comments help..thanks again for nice work
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
Those apps you mentioned take a ****load of memory and add to battery drain because of all the animations and graphics. His is a simple slide function that sips memory and battery life. Very useful IMO. Sliding is good cuz I find unlocking the WM way to be annoying. I have to touch an icon to lock. Then to unlock, I have to press two buttons. With sliding, it locks automatically and unlocking is accompished in one simple motion.
You're right that there's already enough S2U programs.
I also think S2U2 is an awesome balance between beauty and speed/mem cost. For people who have only tried S2U, you really need to change to S2U2... WAY faster and stable!
In most cases, yes S2U isn't that necessary, as it's similar an extra step to get to your today page, but I need it because:
1) My alarms don't wake if the phone is on standby, so I put it onto S2U2 mode when I sleep
2) My audio manager doesn't go to the next song if the phone is on standby, so I have to lock my phone while listening using S2U2
I question how good it'll be to have Slide 2 Lock as a today plugin, since I don't need some extra waste of space. What I do is set the gesture right-to-left (using FTouchFlo) to execute S2U2 so when I slide right to left, it opens S2U2, then sliding left to right, unlocks it. Love it!
smittyofdhs said:
is it me or do we really need another "slide to unlock" app to mimic the iphone. There's already S2U Pro & S2U2.
What's funny, is that yeah these are cool but are they really needed? If you setup the device button lock correctly, then what's the point of a S2U app? All it does is add one more step to getting to your today page....
Click to expand...
Click to collapse
I hate to say it, but that's not quite true. If you setup the lock all buttons, sure you won't accidentally turn it on, but if you get a phone call, it doesn't just power right off (at least my 6700 doesn't) - it can and has made phone calls like that...
And as for the S2U/2 - they use quite a bit more memory than this. A 5k program use is great, although I won't use it because I like the clock on s2u2.
Great App
This is all I ever really wanted. Just a very simple slide unlock. simple.
Excellent.
thanks.
This simple slide to unlock app is perfect for my needs...Thanks!
The point here is WJames created an application for his own use and shared it with everybody. If someone think that it is not req. they might not use it. Anyway thanks for the nice little app.
Thanks! Great small app. Would be fantastic with a simple white clock above the lock bar though, so we could check the time on the phone without unlocking it. Thanks a bunch!
Hi all,
I have noticed a few problems/issue, just wondering if anyone else has noticed them:
1. Poor streaming from youtube - it becomes very pixelated and I can hardly see or hear a thing.
2. When you have the security set on the phone (PIN) and the phone is locked, when you receive a call you cannot see who is calling you!! Even once I have typed in my PIN and unlocked the phone I still cannot see who is calling me!! Very annoying cos i love the PIN feature.
3. Phone lags heavily once I have sent a text message. I mean about 10 or 11 seconds it freezes and doesn't respond to any input.
4. How do you pan in and out (zoom in and out) using the GUI? I can do it with the volume rocker but in the guide it says to "to pan a page, touch and hold the screen, then move your finger" which doesn't do anything for me but scroll..
5. Activesync keeps appearing in my running programs. I haven't set it up and have not used activesync yet so i'm not sure why it keep appearing in my running programs - I have to stop it roughly 8 or 9 times a day! Not sure how to disable it.
6. Panels - anyone have any idea when we might see some new panels? I've looked at the Sony Ericsson "fun" site and tried a couple of those but just wondering if anyone has any info on when we might see some new ones?? and where??
7. The RAM. This doesn't seem as though its pushing that extra RAM that we were promised. It states that it's running 256mb RAM but i'm sure SE told the world that we would see 400mb RAM? Apparently the extra RAM is locked to the CPU (so i've read) but how can we be sure?? Anyone know more about this?
Can't think of anymore issues I got but they are the main ones. On the whole its a great phone, i love it.. I've been waiting for a very long time for this and its really lived up to expectations.
Thanks in advance for any replies.
Nav
4. How do you pan in and out (zoom in and out) using the GUI? I can do it with the volume rocker but in the guide it says to "to pan a page, touch and hold the screen, then move your finger" which doesn't do anything for me but scroll..
Click to expand...
Click to collapse
Double tap.
nkhangura said:
5. Activesync keeps appearing in my running programs. I haven't set it up and have not used activesync yet so i'm not sure why it keep appearing in my running programs - I have to stop it roughly 8 or 9 times a day! Not sure how to disable it.
Click to expand...
Click to collapse
Setup a fake server connection with any data in ActiveSync. Set it to manual update. After that, delete it again and it should stop appearing. Have done so on other WM phones, but haven't tried it on this one.
Thanks for the replies,
I tried the Activesync thing and i'll let you know how it goes.
Tried the double tap for the "pan" and it still didnt do anythin (tried it whilst using IE, Opera, and viewing images) Does the "pan" mean to zoom in or is it to scroll? I'm confused lol..
Anyone experience any of the other things?
double tap is for zoom and if you move your finger it moves the page
oh ok.. I have tried double clicking on nearly everything that I can zoom in on (IE, Opera, images etc) but it doesn't seem to respond..
Is there a setting or anything that I need to select?
In Opera it should work without any problems. So if you double tap nothing at all happens? did you try it with the stylus?
nkhangura said:
1. Poor streaming from youtube - it becomes very pixelated and I can hardly see or hear a thing.
Click to expand...
Click to collapse
Mine does this unless im in a 3G/H area then its perfect
Hi,
I got the zoom working with the double tap in opera..
My youtube always seems to be messed up even if im in 3G/H area
Activesync still seems to be playing up - it just appears in my running programs now n again and i have to stop it. ive even synced up to my pc and changed all settings to manual and tried to disable and other connections
Sorted number 2 and 3 by turning the phone off and taking out the battery and putting it back in and turning it on hehe
nkhangura said:
Activesync still seems to be playing up - it just appears in my running programs now n again and i have to stop it. ive even synced up to my pc and changed all settings to manual and tried to disable and other connections
Click to expand...
Click to collapse
This is what I did to disable the auto ActiveSync, seems to work fine for me:
1. Open ActiveSync.
2. Hit 'Menu' --> 'Configure Sever'.
3. For Email Address, type "[email protected]" (or whatever you like) and uncheck the box.
4. 'Next', server address, type "[email protected]" (or whatever) the box underneath stays checked.
5. 'Next', User name, PW, and Domain: Type "Blah" for all of them and check the box.
6. 'Next', uncheck all the data it wants to Sync and hit 'Finish'.
7. Back in the ActiveSync home hit 'Menu' and 'Schedule', Make sure 'Sync during' is Manually for both options and uncheck 'Send/Recieve when I click'. Hit 'Ok'.
After that I didn't have any issues with ActiveSync connecting on it's own and Task manager stays unburdened.
for youtube try the standalone player and panel it works better.
Hint: after sending sms hit OK on the keypad or the screen.
It freezes when you hit "dismiss".
"Pan" maybe means enabling smooth scrolling? It works everywhere: contacts, menus, email.....
Aha, the RAM: X1 has 256MB for user,
PLUS 128MB for graphics.
Total: 384MB.
My X1 won't wake up to the panels, it wakes up to TF3D i have installed... is there a way to have it wake up to the 9 panel page? Like a cab, reg edit or something?
I've searched and haven't found anything...
Thanks in advance!
create a shortcut of panelmanager.exe in Program Files\PanelManager and put it in windows\startup
edit: noticed you said wake up...the solution i've posted should work when you turn the phone on. Not for wake up though.
yeah, thanks for the insight tho bro... id really like to see wake up in panels view...
If you want your phone to wake up to the panel you used the last:
When you are using S2U2 then switch off the option for "unlock to home".
Also uncheck Start --> Properties --> Today --> Elements --> show today screen after xxx hours.
If you want the phone to wake up into the "Panel selection screen" -this won't be possible, I fear.
found a partial work around... under backlight settings, i uncheck turn odd device after X minutes... that way, if i turn my backlight off when in 9 panel mode, it will always wake up to it... basically it will wake up where u left it! this will work for now til a real fix/tweak comes along
itsallsubliminal said:
found a partial work around... under backlight settings, i uncheck turn odd device after X minutes... that way, if i turn my backlight off when in 9 panel mode, it will always wake up to it... basically it will wake up where u left it! this will work for now til a real fix/tweak comes along
Click to expand...
Click to collapse
I don't think that there will be a "fix" because there is no "issue".
The phone is not meant to wake up to the panel selection screen. This would be as if my home computer would boot to the taskmanager or I would enter a house through the elevator and not through the front door
I don't really want to know why you want your phone to wake up the the panel selection because I'm sure you have your reasons but you seem to be one in a million to like such a behaviour.
If I would have to choose a panel first everytime I wake up the phone to see the clock or the calender or the messages I would bring it back to the store the same day and buy another one.
skycamefalling said:
I don't think that there will be a "fix" because there is no "issue".
The phone is not meant to wake up to the panel selection screen. This would be as if my home computer would boot to the taskmanager or I would enter a house through the elevator and not through the front door
I don't really want to know why you want your phone to wake up the the panel selection because I'm sure you have your reasons but you seem to be one in a million to like such a behaviour.
If I would have to choose a panel first everytime I wake up the phone to see the clock or the calender or the messages I would bring it back to the store the same day and buy another one.
Click to expand...
Click to collapse
well, i wear a wrist watch and tapping a panel to check messages isn't that big of a deal to me... and altho its not a "fix", it will be more of a "Tweak"...
But, i plan on taking a crack at creating my own panels (not sure how difficult it would be) and that way i can put specific programs to launch from panels, for example Opera or a specific media player...
All i can say is "to each his own" mah man....
maybe i feel this way because i've had a Touch Pro for a while now and am kind of tired of TF3D (altho it is nice to have on the X1), but i recieved this x1 as a generous bday gift from a friend today and am infatuated with these panels!
I have a program like a stopwatch that I need to be able to see what time it has, but the screen goes black whenever you don't touch the phone after a while. The program itself doesn't have this option, but is there other programs that will allow you to customize which programs CAN do this?
bump.........
I think if change the back light settings you should be able to achieve what you are looking for!
Start/Settings/Sound & Display/Backlight there will you find the settings you need!
toreone said:
I think if change the back light settings you should be able to achieve what you are looking for!
Start/Settings/Sound & Display/Backlight there will you find the settings you need!
Click to expand...
Click to collapse
No, that would do it for all programs thereafter. I'm looking for something so it'll know specifically which programs to do it for.
I've wondered this as well but never came up with anything... Backlight settings do not have a 'Stay Continuously On' option.
I want to leave the screen on while playing Slacker radio with my HD2 connected to a desktop cradle but the screen always dims
Perhaps there is a registry tweak?? The search continues...
+1, gets annoying for bejewled. =)
i would love this fix
KeepAwake works great for this
http://forum.xda-developers.com/showthread.php?t=661472&highlight=KeepAwake