Slow data transfer speed in WM 6.5 - Touch Diamond2, Pure General

Hi people,
I have a problem.
Since I installed the official WM 6.5 portuguese rom last week, the data transfer speeds from pc to TD2 decreased a lot!
It takes about 9 hours to transfer 250MB to TD2 memory card through the USB cable!
Am I doing something wrong?
Is there any option I have to connect / disconnect to increase the data transfer speed?
Thanks in advance for your replies.
Greetings from Portugal

scarequinha said:
It takes about 9 hours to transfer 250MB to TD2 memory card through the USB cable!
Click to expand...
Click to collapse
Are you using disk drive mode, or ActiveSync mode? The former is much quicker. You need to check your connection options in case it defaults to ActiveSync without prompting.

It's slow both ways.
It asks everytime I connect which mode I want.

scarequinha said:
It's slow both ways.
It asks everytime I connect which mode I want.
Click to expand...
Click to collapse
How about temporarily disabling antivirus, disk defragmenter etc? Maybe they started up coincidentally. Check what is happening in Task Manager when you transfer files.

Thanks for the suggestion but it didn't work either.
Any more ideas?

I had the same problem after using for a while udK Leo R5 WM6.5, at first it woked well, then slowed down, then couldn't see my SD card anymore . Actually this happens with almost every WM6.5 I tried. I reported this issue dozens of times, going to do it once again in udk ROM related thread, with no hope. Back to my old beloved TomTopaz WM6.1 !!

Related

8525 doesn't wake up if wifi is enabled and other issues...

Hi all...
Not sure if anyone else has come across this, but with my 8125, I got into the habit of connecting to my lan via wifi and just leaving wifi on even when I set the 8125 to sleep. Whenever I would bring it out of sleep, the wifi would just connect again. The 8525 refuses to wake up so I end up having to do a soft reset.
Other issues... I had also gotten used to leaving gprs enabled since I have an unlimited data package. Again, with the 8125, everything was great. With the 8525, not so great. When leaving gprs enabled, the connection seems to die even though it still says I'm connected. I can't browse the internet, update Pocketweather, etc. I end up having to disable gprs for a bit and then trying again.
Anyone else have these issues? If so, did you fix and how?
TIA!
*bump*
No one else is having these issues?
i had the wifi issues you describe on my 8125 (it would not wake up after connecting to wifi and going to sleep). i have not yet used the wifi on my 8525.
Do you have a media card installed?
Do you have any apps installed to this card?
If so then, using a microSD adapter, plug it into an XP machine and run defrag on the card. This solved my problems immediately.
If this doesn't help you need to look at what apps are installed on your card and uninstall if necc.
Rgds
smads said:
Do you have a media card installed?
Do you have any apps installed to this card?
If so then, using a microSD adapter, plug it into an XP machine and run defrag on the card. This solved my problems immediately.
If this doesn't help you need to look at what apps are installed on your card and uninstall if necc.
Rgds
Click to expand...
Click to collapse
Thanks, I'll check that out. I do have a few apps installed to the card.
smads said:
Do you have a media card installed?
Do you have any apps installed to this card?
If so then, using a microSD adapter, plug it into an XP machine and run defrag on the card. This solved my problems immediately.
If this doesn't help you need to look at what apps are installed on your card and uninstall if necc.
Rgds
Click to expand...
Click to collapse
I'll try that... but would you (or anybody) care to explain why this solves the freeze problem?

Connecting to Activesync but not able to Sync

I am having a problem syncing with activesync, and i must think the problem is due to a drop i had the other day. It made the miniUSB port...smaller seemingly, although the cable still fits in (be it very snugly now). i can still charge it in the wall, and it shows "connected" on activesync when plugged into the pc and the amber light comes on every time. However activesync quickly gives me a message that "synchronization cannot be completed successfully, please remove device and try again or open the troubleshooter"
I'm not sure if i should just start to look for a different way to back up files via PIM or others and move on without activesync ...flash using microSD from now on? consider replacing the port (not even sure how much effort that is, or if it's possible yet)
Or is there anything simple i can try that i haven't done yet? TIA
EDIT: I Have tried unistalling and reinstalling Activesync and even dl'd latest version of AS again
How about deleting the sync partnership with ActiveSync, reestablishing the partnership and then seeing if you are able to sync?
have you tried syncing via bluetooth, then at least you would know its the usb port that is the problem, you say the connection is tight when you insert the cable, are you sure that nothing else is lodged in there when you dropped it?
well, it doesn't look like there's anything in there from what i can tell...the metal actually looks bent or mangled just a bit. Unfortunately my lappy does not have BT, so i can't try that. good thought though
Well if i was you i would invest in a bluetooth dongle for your laptop ,that way you should still be able to sync, and flash via sd card. That way you will have the problem sorted to a degree. Have you tried flashing another rom via cable btw. You say it connects via active sync. I would do a backup using spb backup or something similar and reflash the device and see if that fixes the sync issue. Try a cooked rom first, if that doesnt work try an original rom.
The only reason i mention the cooked rom to flash first is that it is quicker
I've had the same problem where active sync wasn't recognizing my phone.....that is until I soft reset'd my phone while still connected to pc...usually works for me.
another solution..on phone goto:
Settings->Connections->USB-to-PC->Advanced Network Functionality
on... I turned it off. I haven't had a random disconnect, nor PC crash.
A soft reset did the trick for me.
Dillsnik said:
Or is there anything simple i can try that i haven't done yet?
Click to expand...
Click to collapse
If you have a card reader, copy this - http://toril.ru/pda/akrndisadd.exe - onto the phone and run it there. It works every time my phone decides to stop talking to the PC.
Geoff
I am having Syncing issues, last night, has been fine until now.
Did all the deleting partnerships etc but to no avail.
The phone sync's fine with my Work PC(XP) but at home(Vista) its not,
the error 0x?????107 (from memory, will update when i get home)
Exact error: 0x86000107
Hi,
I am having a strange problem with Active Sync.
When I plug in my mobile with USB and use active sync. it does not synchornise.
I have tried all the options liek chaning schedule, changing the settings and diabling advanced network functionality still I am not able to make the diamond synchronise.
Finally, I download the active sync. 4.5 even then my problem remains the same.
It always shows the message "connected" and fails to synchronise.
thanks for any help..
connecting to activesync, buy no able to sync
Hello to everyone.
I have the same problem with my new Diamond. It have synced in the passed, but now I get the same 1 error and code 0x00089107. Can anyone help to fix it, please. Many thanks Tori
bigsteve said:
Exact error: 0x86000107
Click to expand...
Click to collapse
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.
Doing both things in post #6 worked for my TyTN. This trouble started only after I plugged my phone into a Vista laptop to use it as a modem. Gotta love Vista.... (smile)
Thank you for the help, and thank goodness for this forum!
cristiano67 said:
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.
Click to expand...
Click to collapse
I have Vista Home Premium....
try pluggin your mobile directly into a usb port on the back of your pc and not through a hub
mine did this now it works 100% of the time
bigsteve said:
cristiano67 said:
I had the same error.
Solution:
Just add this:
[HKEY_CURRENT_USER\Software\Microsoft\Windows CE Services]
"WCESMGR Windowplacement"="0,1,-1,-1,-1,-1,0,0,0,0"
in windows xp registry.
Error is no longer appeared when I connect t32 (WM6) with my pc.
Click to expand...
Click to collapse
I have Vista Home Premium....
Click to expand...
Click to collapse
I have Vista Ultimate 64 and I usually resolve this just in the way I posted in this thread http://forum.xda-developers.com/showpost.php?p=2827500&postcount=7
Best Regards

Need help : usb connection automatically go to internet sharing

probebly this is a stupid request , i am struck with a auto connection to internet option when i connet usb to my computer , i do not get the htc option sceeen any more , now i am not able to sync to my pc or use memory card, please help
Go to Start Menu...Settings...Connections.... USB to PC and then select Activesync.
You can also re-enable the ask me every time option if you like.
thanks tried that .. still does not work
thanks guys , problem solved after restarting my pc
it dosent work for me.... i cannot connect my HD to my Computer. he always wanna start the internet shainrg... please help!
ActiveSync does not allways works properly with all computers. You could try Start Menu...Settings...Connections.... USB to PC and then uncheck the first option after ActiveSync (something like 'activate advanced network functionality' -I am sorry but my OS is in Spanish-).
I had to do this in one of the PCs I sync with HTC HD, though in other case it synced with no problem.
hmm its worked, but the internet sharing are starting too...
hi i have same problem with automatic start internet sharing... It is some solution for me how disable opening internet sharing after connect to usb?
No matter what I do, I can't get rid of this either... Any more thoughts?
Thanks,
m
This problem seems to have cropped up on at least 3 different threads, and with no sensible fix so far!
I am having problems on my stock Rhodium WWE, where I used to get a choice of AS or Storage card as mass storage, now I just get the internet connection sharing screen.
I have tried the various other fixes presented, but no luck so far.
same problem...
hxxp://forum.xda-developers.com/showthread.php?t=649963
here too.

My HD2 freezes/crashes after connecting to USB in my PC

After installing Miri's rom 6.5.x my HD2 started crashing every time I connect it to the PC whether it is on ActiveSync or DiskDrive mode. It sometimes crashes right after I connect it , but most times after I disconnect it. I have installed Steve007 and SUperboy007 Elegance theme , Midomi , ManilaBirthday , Klaxon , NetRipper's KeypadLedControl , CorePlayer 1.3.6, AppToDate, JWMD Icon Changer, TouchPal, cleanRAM, TorchButton, Chainfire HD2 3D Driver Patch, Mosko.Mobi FIM , Jaguaralani HD2 Action Screen , SRS WOWHD , Resco Explorer and Resco Photo Manager , Xtask , SPB Backup and BSB Tweaks 1.6.
Could you please tell me what is wrong ?
I did hard reset after I flashed the rom.
Anybody?
your whole device or just audio manager?
dont know if this is of interest to you:
http://forum.xda-developers.com/showthread.php?t=624219
My problem is different.My whole device crashes and needs a soft reset after I disconnect it from the PC
Have you installed any of those to the storage card? Because the storage card is not available to the phone when you connect in file mode, though it should be ok in active sync mode. Most of those things should not be installed on storage card anyway.
Also, when you connect the phone it seems to me that it starts to prepare the pre-selected option right away, so if the last time you connected in file mode, this connection will be opened as soon as you connect, and if you change to another connection, the first connection is dropped and the other opened. To avoid this you could go into the usb settings and change connection mode before inserting the usb cable.
X1-owner said:
Have you installed any of those to the storage card? Because the storage card is not available to the phone when you connect in file mode, though it should be ok in active sync mode. Most of those things should not be installed on storage card anyway.
Also, when you connect the phone it seems to me that it starts to prepare the pre-selected option right away, so if the last time you connected in file mode, this connection will be opened as soon as you connect, and if you change to another connection, the first connection is dropped and the other opened. To avoid this you could go into the usb settings and change connection mode before inserting the usb cable.
Click to expand...
Click to collapse
I've found my HD2 the same problem. As most of my apps were installed on SD card, when I connect the phone to PC, it's OK until I run an app that was installed on card while the phone remains connected to PC. Afterward, the phone freezes without any word.
Just a piece of my own experience...
Are there any new hints on this item?
My HD2 also freezes, as soon as I disconnect from USB, using hard disk mode. (When using USB to ActiveSync, there are no freezes).
this used to happen to me 2 months ago, but i cant rememeber what was eactly the reason, it may have been 'a theme, task manager or as i rememeber i suspected G profile '...
nothing of these is installed on my device (beside the OEM task manager).
Thanks anyway!
Just try to give it some time. Due to the fact that windows as well as several programs use some kinda autoplay options when external storage device are connected it may take some time until you can use your device. Mine freezes for seconds to one or two minutes until it can be used.
I remember when I made a rom and it didn't include a few oems in my kitchen, it caused freezing when I tried to access the sd card when connected to the computer
have you flashed a new rom to see if the rom isn't the problem?
I only flashed the new official Vodafone 1.72 ROM.
Exactly same kind of problem in HTC touch HD
I know I am discussing this in HTC touch HD2 forum, but I have HTC Touch HD and facing exactly same kind of problem. Have Upgraded from 6.1 to 6.5. Worked flawlessly for 5 months until now. Phone freezes in the Today screen right after connecting to computer thru USB and have to resurrect by resetting. I have Winterface UI installed. It used to work fine before. Please help.
I have noticed after many many efforts and after reading many subjects about the freezing issue, and after almost dumping the HD2 in the garbage, that the reason for this problem is the SD card 32 fat. I have switched a couple of 8GB cards and the system freeze starts within minutes. Then I copied every thing onto a 4G card 16fat and the mobile is flying since then.
Also avoid spb-traveler as it has a conflict with the device making it very slow and full of errors.
Still a problem...
I was excited when I saw that someone had posted on this subject, as I too am plagued by my phone crashing when its connected to USB to the pc. Unfortunately, the post was from a long time ago. I'm using the newest T-mobile rom 3.14.531.1 and it occurs EVERY time I plug the phone into my Windows 7 computer or my Mac...
I don't specifically believe that it's related to the SD card itself, because I can connect in Android via USB and this isn't a problem. I suppose, this could be an issue if it's just related to WM 6.5. My next option (my phone is not with me currently) is to remove the SD card and plug in the phone and see if the same thing happens. If it still occurs, I believe that would 100% rule out the SD card as the issue.
acemonvw said:
I was excited when I saw that someone had posted on this subject, as I too am plagued by my phone crashing when its connected to USB to the pc. Unfortunately, the post was from a long time ago. I'm using the newest T-mobile rom 3.14.531.1 and it occurs EVERY time I plug the phone into my Windows 7 computer or my Mac...
I don't specifically believe that it's related to the SD card itself, because I can connect in Android via USB and this isn't a problem. I suppose, this could be an issue if it's just related to WM 6.5. My next option (my phone is not with me currently) is to remove the SD card and plug in the phone and see if the same thing happens. If it still occurs, I believe that would 100% rule out the SD card as the issue.
Click to expand...
Click to collapse
Well, I removed the SD card and when I plugged it into a computer it STILL acted weird. The symptoms seemed different though. First, I can't hit the start button. Well, I can physically touch it, but it does not respond at all. Nor does the start icon at the top take me to the start menu. Also, I tried to go into settings > Menu > All Settings to then turn off sense to see if that was the problem, and it won't even let me in to the 'all settings.'
I guess next step is to just do a hard reset in hopes that this fixes the problem, that or move to a custom rom. I just don't really want to do either because I have a lot of stuff I'd rather not tweak to get to where my phone is at again.
If anyone has any ideas, please help.
Thanks
Hey
Just turn the data sync options like fb and twitter to off. ANd you phone will be running in no time. JUST went to the same problem today and found turning data options off as the best solution.
-Harsh

active sync

has any1 noticed active sync proces/task runnin on their x2
even if they dont connect the phone to the computer for few days
i find it every few hours it reappears in the task manager and i shut it down
but it keeps popping up
anyway to disable this because i think this is the main reason for my battery to drain (lookin for sync connection)
clean wm 6.5.3 with only necessary cabs from the rom
indycar said:
has any1 noticed active sync proces/task runnin on their x2
even if they dont connect the phone to the computer for few days
i find it every few hours it reappears in the task manager and i shut it down
but it keeps popping up
anyway to disable this because i think this is the main reason for my battery to drain (lookin for sync connection)
clean wm 6.5.3 with only necessary cabs from the rom
Click to expand...
Click to collapse
This is what I also experienced on X1.
It appears when you often connect the device to PC.
the thing is it was last connected to a pc when i copied rom cabs to sd card then
i disconnected the phone did clear phone and installed clean winmo with only selected cabs since then it was not connected to any pc and it was charged only
with AC adapter
indycar said:
the thing is it was last connected to a pc when i copied rom cabs to sd card then
i disconnected the phone did clear phone and installed clean winmo with only selected cabs since then it was not connected to any pc and it was charged only
with AC adapter
Click to expand...
Click to collapse
imas uklopljen microsoft direct push v communication manager?
nope ms direct ush is greyed out all the time
indycar said:
nope ms direct ush is greyed out all the time
Click to expand...
Click to collapse
probaj to: http://forum.xda-developers.com/showpost.php?p=2481033&postcount=81
ok this solved the case thx illu

Categories

Resources