I have been using SPB Weather program for a while but I have difficulties to syncronise it with my PC to download the latest forecast.
I got the error message the "Please establish internet connection" but I can connect to MSN or web via Opera at the same time.
On the "Connections" section at "Settings" my ISP and GSM Provider's settings are already installed.
Does anybody have any solution or suggestion?
Thanks
Baris
Hi all,
Ok, let me be stright forward. Is there any methods to automaticly disconnect GPRS connection AFTER certain datas being downloaded into our PPC?
Let's say that I use Opera Mobile software to surf the internet via my PDA, and after my browser finished opening and downloading a page, I want the GPRS connection be disconnected. Manually I tap the "G" icon on topbar and tap disconnect option. Now, what if I want to set it automaticly, is there any possibilities???
Sorry for the bad english!
Best Regard,
Xue v.2
Daniel Herrero BandSwitch v 2.4.3
Just Google it. I think it's perfect.
There is also option in Schaps Advanced Configuration v2.1.0.0
in connections tab
Can't google Daniel Herrero BandSwitch v 2.4.3. Google show me 2 vietnamese page, with no link...
Let's try Schaps'
Here you go.....Works great
GB-soft tweak for wm5 (works also in wm6 and up)
http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm
Actually the above will only disconnect after the app is closed....Done using opera and you close it then it will automatically disconnect. May not be what you are looking for exactly
Hi guys,
I have little problem.
My touch dual connects automaticly to gprs without asking.
How can i find wich program or setting triggers this.
Weathers is manual.
Email is manual.
I've installed also NoData. This works fine. But when i enable the gprs and after a while its connecting to gprs.
Is there another program which asks for confirmation when its connecting to gprs.
Thanks.
Regards,
TMF
My phone started doing this randomly the other day, I softreset it and it hasnt happened since.
check again - this is most likely email .... maybe you have more than one email accounts installed and one is asking for data ?
also, what other software do you have on your nike ?
sackbauer said:
check again - this is most likely email .... maybe you have more than one email accounts installed and one is asking for data ?
also, what other software do you have on your nike ?
Click to expand...
Click to collapse
i have 3 email accounts and all are manual. i've checked it.
i've a lot of software on my dual:
fullscreenkeyboard
googlemaps
tomtom
pcmkeyboard
spb pocketplus
Resco Explorer
S2U2
Salling Clicker
Spb Backup
Touchpal
NoData
Opera
Spb Brain Evolution
TCPMP
TotalCommander
ClearTemp
Easysync Pro
SlideActions
I am gonna check if one of these do this.
But is it possible that a callendar entry do this??
I had the same problem and I have tried software reseting the phone, the email functionality was completly turned off. So the only way i found of fixing it is to go to your comm manager and switching off "Data Connection", "microsoft direct push" and "Internet Sharing"
my wifes elf started doing this but we found out it was 'worldmate'. After setting it to manual it was gone. Whatabout your RSSfeed program?
Maybe you have a pending incoming or outgoing mms? this was my problem i believe.
ducamie said:
Maybe you have a pending incoming or outgoing mms? this was my problem i believe.
Click to expand...
Click to collapse
no unfortunately this is not it...
Check Windows Live Messenger if installed. On my TyTNII that was the problem. Start it and make sure to log off before exit the program. Soft reset and see what happens. It worked for me
Hi,
My second problem is that my Iolite activate data connection by itself like it was trying to download or uploade something (MMS or something), but the connection stay alive for a long time and nothing happen.
When I turn off data connection, it turn on again in a few minutes.
To avoid costs I use program which disable all configured data connections (program called "NoData"). But when all connections are disable, my Iolite don't turn off the screen and backlight after inactivity time.
I think that the reason can be in Microsoft Direct Push, but I don't use it.
This article is similarity to my problem: http://khason.net/blog/how-to-disable-exchange-security-policy-for-windows-mobile-devices/
The problem apears today. I have my Iolite for 2-3 weeks.
Help me please... It's so frustrating...
Radek
snorek said:
Hi,
My second problem is that my Iolite activate data connection by itself...
Click to expand...
Click to collapse
... first read, then post. Nobody will write the same problem a second time. Here the link (5 or 6 themes under yours): http://forum.xda-developers.com/showthread.php?t=524825
mirko.prinz said:
... first read, then post. Nobody will write the same problem a second time. Here the link (5 or 6 themes under yours): http://forum.xda-developers.com/showthread.php?t=524825
Click to expand...
Click to collapse
The topic you have paste is about totally different problem.
I'm not looking for program which can turn off unused connection, but I'm looking for a reason of unexpected turning on data connection.
snorek said:
The topic you have paste is about totally different problem.
I'm not looking for program which can turn off unused connection, but I'm looking for a reason of unexpected turning on data connection.
Click to expand...
Click to collapse
I think, AdvancedConfig will be the right decision. Found it here.
Iolite comes with some apps, which use Data connection. For example Weather (default setting is to update it no matter what) or QuickGPS (downloads sattelite position info). Also when you are browsing via WiFi or ActiveSync, it might sometime disconnect and Data connection is automatically started.
Microsoft DirectPush is used with Exchange server (for example, I use it with my company email) and you must configure it. It is not enabled by default. Anyway, when I don't want to check email all the time, I just disable DirectPush and it stays disabled.
You also might to check, what app is using your DataConnection. Try SPB Wireless Monitor (I think it is trial), which can show you, what app is using which connection.
mirko.prinz said:
I think, AdvancedConfig will be the right decision. Found it here.
Click to expand...
Click to collapse
I have this program install already, but I don't see any option which can help me.
Any suggestion?
torrentonly said:
Iolite comes with some apps, which use Data connection. For example Weather (default setting is to update it no matter what) or QuickGPS (downloads sattelite position info). Also when you are browsing via WiFi or ActiveSync, it might sometime disconnect and Data connection is automatically started.
Microsoft DirectPush is used with Exchange server (for example, I use it with my company email) and you must configure it. It is not enabled by default. Anyway, when I don't want to check email all the time, I just disable DirectPush and it stays disabled.
You also might to check, what app is using your DataConnection. Try SPB Wireless Monitor (I think it is trial), which can show you, what app is using which connection.
Click to expand...
Click to collapse
Yes, I know that. I turn off weather updater and quickgps (and footprints or something) first day. And I don't have any problem till today.
But what is strange: after disable all data connections some program prevent screen from switch off...
OK, I'll try SPB Wireless Monitor.
Just an idea. Aren't you using CorePlayer or TCPMP? CorePlayer can use network and data connection and also it can override display sleep time.
Advanced Config
in "data connections":
- GPRS auto attach: disabled
Manila TF2D
in "Weather tab"
- menu -> settings -> disable "automatically download weather data"
Settings (Start -> Settings -> System
in "location settings"
- disable AGPS
Messaging
- disable the automatic e-Mail-Download (when it is enabled)
I hope, that will help.
Greetings
edit: OK, i wrote to slowly - 2 posts are come ;-)
torrentonly said:
Just an idea. Aren't you using CorePlayer or TCPMP? CorePlayer can use network and data connection and also it can override display sleep time.
Click to expand...
Click to collapse
I think, isn´t so, i use this programm to.
SPB Wireless Manager show me that Palringo was the problem. I've unchecked "run at startup" after first run of Palringo, but it checked again without informing me
THX for help all of you
I hope that Palringo was the only reason
Tell me please, what is Palringo?
Thanks!
mirko.prinz said:
Tell me please, what is Palringo?
Thanks!
Click to expand...
Click to collapse
Palringo is powerfull ane free multi-platform instant messaging client. You can sent text, images and voice messages.
It support:
Windows Live Messenger ® (MSN)
AOL ® Instant Messenger (AIM)
Yahoo! ® Messenger
Google Talk ™
ICQ ®
Jabber ®
iChat® / MobileMe ®
QQ ®
Gadu-Gadu ®
Facebook Chat (Alpha)
More info: http://www.palringo.com
Aha, thank you!
Greetings
Dont worry
My Iolite also connect itself to the internet, but i use my iphone 3g sim with it, internet for free XD
cturpel: What's the point of your post?
cturpel said:
My Iolite also connect itself to the internet, but i use my iphone 3g sim with it, internet for free XD
Click to expand...
Click to collapse
Great So go abroad
I really searched hard, but couldn't find any solutions, neither in a german forum.
My TD2 can use the wlan for internet via topaz' integrated opera without a problem. But if it comes to adding mail accounts, I am not able to choose wlan as the connection to download / send mails (yes, all access data are correct, it's only that I can't choose wlan as connection). Due to obvious reasons, I don't want to use the regular networks of my phone provider. I just want to use my free wlan at home to send / receive mails. What to do?
Normally when a data connection is request, if pda has the wifi actived it first try to connect with a wlan. if it don't find an active wlan, then it connect by gprs or 3g.
if you want avoid the connection with gprs/3g it is advisable to disactivate it by the program Modaco Nodata.
Got it now, all worked well. But after I entered a complete mail account that worked, I entered a second mail account that I didn't configur till the end. Now it appears in the touchflo 3d, is not deletable and does also NOT appear in the WM Mail structure. It seems it only appears in the TouchFlo, which showed it again after deactivating/ enabling TouchFlo again. SKTools doesn't find it either. Dunno where to fin it apart from the registry, where can I delete it?