Has anyone flashed the Official HTC 6.5 to an ATT Pure? - Touch Diamond2, Pure General

Any issues? Was it a straight flash or do you need to hard spl?

Needed HardSPL and honestly after a couple of hours of playing with it I flashed Dutty's ROM.

What about ATT Pure's stock rom... is it available to upload it back if necesary for warranty purposes?

I'd like to know about a "True Rom" backup image as well
I'm contemplating burning something new
probably a one of "Duttys" from what I've read" (how did you like it?)
but still not clear on any special issues with burning the AT&T Pure
using Roms that were meant for the Diamond 2. (seems most are)
I'm concerned about difference in the Radios as the D2 was designed for european phones. I that a problem?
And as implied by the other poster, I'm willing to take a reasonable risk
but would like to retain my warranty for hardware failure etc or re-sale
so would like to be able to revert to the stock device.
I'm new enough to phones in general to need a better undertanding of the
any required unlocking issues and how isolated are the components of the software (Winmo and TF3D) and Radio protocol software?
(as I'm sure do most newbies)
Any explanations or pointers to good source of "medium level" technical
phone info would be much appreciated
Thanks
KJL

Kenn Lynch said:
I'd like to know about a "True Rom" backup image as well
I'm contemplating burning something new
probably a one of "Duttys" from what I've read" (how did you like it?)
but still not clear on any special issues with burning the AT&T Pure
using Roms that were meant for the Diamond 2. (seems most are)
I'm concerned about difference in the Radios as the D2 was designed for european phones. I that a problem?
And as implied by the other poster, I'm willing to take a reasonable risk
but would like to retain my warranty for hardware failure etc or re-sale
so would like to be able to revert to the stock device.
I'm new enough to phones in general to need a better undertanding of the
any required unlocking issues and how isolated are the components of the software (Winmo and TF3D) and Radio protocol software?
(as I'm sure do most newbies)
Any explanations or pointers to good source of "medium level" technical
phone info would be much appreciated
Thanks
KJL
Click to expand...
Click to collapse
HTC Pure or Touch Diamond2 are just brand names. They both have internal name as Topaz. Look underneath your phone battery, Phone is called TOPA210 which means Topaz. They have almost similiar hardware and need same drivers. The radio band is different, but they have the same radio hardware (GSM), just tuned (hardwired) to operate at different frequencies. Thus, there is no issue with flashing D2 ROM on Pure. Its works just like D2. The only thing you need to be careful is not to flash CDMA ROM on GSM phone and vice-versa. They have different driver requirements and it will kill the phone.
I think some chef's have dumped the stock At&t ROM. Try searching the ROM section.

I know the phones are the same just want to point out that under the battery on the ATT Pure it says "WarHawk". There is also a ring tone on the phone that has WarHawk in the name.

I have!!
I am using the HTC WM6.5 on an ATT Pure with no issues. You only have to remember that the Pure does not support the 3G 2100 band (only 3G 850), but it offers the full range of GSM/EDGE bands.
The Pure ROM had more games, though. I miss them

They're the same phones. I've already cooked a few roms and had the Official Topaz rom on my Pure and everything works perfectly. No worries.

Yep, thanks guys. I did it too with no issues. I like the bigger icons on the official and all the junk's gone too. Nice little device.

Related

Hermes - Alternative OS

Hi, I've had a Hermes running WM5 for a while until I got fed up with the usual crashes and some other performance issues. A few days ago I installed WM6 and though it has some interesting new features it's still a little bit heavy and I'd rather have better performance than a pretty interface.
Can someone recommend some good ROMs or alternative OSs for the Hermes? Maybe some tweaks to improve speed... For example: it takes way to long to load the contact list or show who's calling when a call comes in.
I've been waiting for Ubuntu Mobile and/or Android to come out but apparently those will take some more time...
If you are running a stock rom thats probably you're problem. They are full of "Bloat" apps for your carrier. First thing is (if you're not sure its unlocked) unlock your Hermes with the unlocker v3a on the upgrading thread. Then Hard SPL your Phone on the same forum - Hard SPL, or how not to brick your hermes (this will void warranty) and then pick a lite rom or rom you like off the forum. I personally like PDAViets roms as they are VERY fast. If you aren't used to flashing and want stability look at the wm6 roms and not the wm6.1 roms as there are issues being reported by others...
Cheers....
Thanks, I actually flashed the device a few days ago with WM6 Black 3.0 or something like that... It's kinda heavy
I did the HardSPL upgrade before flashing and all went ok. What I haven't done is upgrading the radio. What's the object of upgrading that?
Anyway, I'll give PDAViets a shot!
The black roms are fairly old now and I haven't seen any in developement. Would try either schaps, pays, Binky11, CRC's, PDA corner...... the list goes on. As I said, I tend to favour PDAViet.
As for the radio, "If it ain't broke, don't fix it!". This is the part of rom upgrading that produces the most bricks... If you find no problem with your radio, its advisable to leave it alone. Changing to the latest ISN'T always the best as they tend to be better or worse depending on your carrier. If you can see what the latest radio rom is that your carrier is using you MIGHT upgrade to that BUT try not to flash this too often... You have been warned.....
Have fun and happy upgrading...
Cheers...
Indexing
Why there is no sticky post, which contain in its first message, all the latest versions of all the ROMs available in the forum ?
It can be updated from time to time, and always contain the latest versions of all the roms available in the forum.
if there's allot of maintaince to do, at least it can contain links to posts, which the ROM owner can update.
If there's already such a post, I'd be very happy to get the link...
Most of the roms on the site are in developement. They are made by people who are curiose to see what they can do and who may have a certain need from their os. They are nice enough to share their hard work with the rest of the community and for this we thank them profusely...
The only way you can be sure of finding the rom you want is to keep your eyes peeled on the "Hermes wm6" part of the forum. Find out who makes the roms you like then do a search for those.. They're ALL floating around here somewhere...
Cheers....

how come the roms of x1i and x1a are compatible

sorry to ask such basic questions but im having truble locating the answers:
1-can someone explain why the cooked or stock roms (os or radio) work fine with both x1i and xia. they have differnt hardware after all (different radio frequency support, different cameras with different video recording capability)
also
2- how come the radio rom is the same while US and europian use different frequencies . and doent the cooked OS rom need to be aware of what frequency the phone is using
3-if i flash a cooked rom that is based on the US ROM do i lose the capability of recording 30FPS ? is the opposite true also?
4- if cross flashing (cooked OS) works for x1 how how come it does not work with touch pro or diamond (meaning that i cant flash htc touchPRO with a ATT FUSE?
Because the software is built to handle both sets of hardware.
There is nothing fundamentally different between the X1a and X1i. The only significant differences are the different radio chip and different Qualcomm CPU, but the OS itself does not need to be changed for those differences. When you flash a ROM, you are only flashing the OS; the radio component is not flashed. Slower video recording in the X1a is just a limit of the MSM7201A chip, again not controlled by the OS.
That should answer questions 1-3.
As for Touch Pro vs Fuze, you can actually flash a Touch Pro ROM onto a Fuze and vice-versa, but the Fuze does have some fundamental differences, such as an extra PTT button, a special AT&T keyboard, and no front camera -- all of which are controlled by the OS. As a result, "cross-flashing" ROMs may have unexpected results. Some Raphael chefs now offer two versions, Touch Pro and Fuze, which are essentially the same minus a few changes for those specific hardware differences. Fuze versions may also include original AT&T branding.
"Cross-flashing" is fully not possible between GSM/UMTS and CDMA phones (eg: between Fuze and Sprint Touch Pro).
This is not strictly on topic (though it is related), but would it be possible to come up with a process to port roms cooked for the Touch HD over to the X1 by updating the parts that would be affected by hardware differences?
I guess as all roms are different that this would not be easy, but if it were possible it'd open up more choices for users. Might it be feasible, or no chance?
DavidMc0 said:
This is not strictly on topic (though it is related), but would it be possible to come up with a process to port roms cooked for the Touch HD over to the X1 by updating the parts that would be affected by hardware differences?
I guess as all roms are different that this would not be easy, but if it were possible it'd open up more choices for users. Might it be feasible, or no chance?
Click to expand...
Click to collapse
You can port the XIP (core os) across and various bits of the operating system, but it can get messy. T
here's no simple way to "port" roms from one device to another.
Have a look at Itjes roms for examples
Is X1a us or uk?
ratchetnclank said:
Is X1a us or uk?
Click to expand...
Click to collapse
X1a is not US nor UK
X1a = "america" (US, Canada, Mexico, Purto Rico, Chile, Argetina, Boliiva, etc etc etc)
thanks people very educational
The only significant differences are the different radio chip and different Qualcomm CPU
Click to expand...
Click to collapse
its funny that the x1i to me seems (hardware wise) to have more in common with the HD than the x1a. since both use the same radio and cpu
Right up until you get to the slide-action of the HD... oh wait.
Or the 3.8 inch screen on the x1, oh wait

Asian fonts... has anyone actually tried this...

Quick background... my original aim was to purchase a HD2 with the following:
1) an English UI that can also read/display Asian SMS, Internet, Music Player, File explorer etc (primiary Chinese only, but great to have Jap if possible)
2) Having the 3G 850Mhz Bandwidth
I am not a big fan of tweaking, especially hearing all the problems caused by CE-Star and other methods. Recently I'm pretty much convinced the HK Model of HD2 satisfy my requirement (1), but not (2). But seems to have both, I have to tweak.
I just found the following link and was wondering whether someone has tried it:
http://pocketnow.com/how-to/how-to-get-asian-characters-to-appear-on-non-asian-windows-phones
It gives more than just Chinese, from pocketnow which I think it's not a bad site, but other than bugs and problems, I am not sure if it applies only to the translation programs or actually everything, including SMS, Internet, Music Player, File Explorer etc... It would be great if someone tried could provide feedback, thanks heaps
squall09 said:
Quick background... my original aim was to purchase a HD2 with the following:
1) an English UI that can also read/display Asian SMS, Internet, Music Player, File explorer etc (primiary Chinese only, but great to have Jap if possible)
2) Having the 3G 850Mhz Bandwidth
I am not a big fan of tweaking, especially hearing all the problems caused by CE-Star and other methods. Recently I'm pretty much convinced the HK Model of HD2 satisfy my requirement (1), but not (2). But seems to have both, I have to tweak.
I just found the following link and was wondering whether someone has tried it:
http://pocketnow.com/how-to/how-to-get-asian-characters-to-appear-on-non-asian-windows-phones
It gives more than just Chinese, from pocketnow which I think it's not a bad site, but other than bugs and problems, I am not sure if it applies only to the translation programs or actually everything, including SMS, Internet, Music Player, File Explorer etc... It would be great if someone tried could provide feedback, thanks heaps
Click to expand...
Click to collapse
Well, I promise this will be the last post I make in answering your questions, as you did not seem to appreciate my last answers to your posts in this thread.
But, the way you worded this post I think others may find a bit confusing.
For your first point, it seems to be clear, but I am sorry to say that I personally find it offensive that you refer the people and/or the langauge of Japan as Jap. Is that not considered to be a pejorative term in your country of residence? Sorry, I lived more than half of my life in Taiwan, now closing in on 60 faster than I wanted, and had many IT Japanese friends on the beautiful isle.
I assume now that since your country of residence employs the 3G 850Mhz band (perhaps bandwidth is not the word you wanted here) you are not in Taiwan, but the US or Australia.
I think most people on this forum would not consider flashing a stock HTC ROM or installing a program such as CE-Star as tweaking, so that may confuse some. Sorry again, I tend to be too literal, as I write and edit for IT companies through various PR companies (and that does include, among others, Microsoft, Adobe, HP, Sony, Trend Micro, ...). Now, at least you know where I was coming from in my answers.
If you want to know what the program you linked to can do, why not ask the company that produced or is selling it? Without researching the program, it is just my guess that your desires overshadow the actual capabilities of the program in terms of altering the core capabilities of the OS.
As you require a phone utilizing 3G 850Mhz, and want Chinese support in reading and writing, your simplest course of action is acquiring the HTC HD2 in your country of residence, and then flashing to the Asian English HTC ROM. I should warn you here again that flashing a phone in your region to another region's ROM, even though from HTC, will void your warranty. One other question for you now, as I see from another post that support for traditional Chinese seems limited in the Asian English ROM, are you looking for support for traditional or simplified Chinese?
From your posts, and choice of words, I guess you are fairly young, unfamiliar with and fear such things as flashing a ROM, installing a program, or tweaking Windows Mobile phones. But, you have to jump in somewhere and sometime, and this is the best place to do it if you want an HTC PDA phone that meets your needs. A healthy fear of such things can prevent you from bricking a phone when flashing or tweaking a phone as you are more apt to pay attention to crucial steps in the procedure!
I am indeed sorry if my answers to your other posts put you off. That is my fault, as I thought we were using a common terminology.
Good luck with your quest to find the perfect HTC HD2 phone.
I am not sure why you got the impression I did not appreciate your assistance. Maybe I should've said you were the one convinced me? I am sorry if I made you feel that way, but in fact, i found you were the most helpful in that thread, so thanks lots That thread talked much about 3rd party software (not my preference) or the English (Asia) ROM. My intention of this thread is simply asking if ppl have tried that.
Second apology about using "Jap" for Japanese. I had no intention of offensiveness, it's kind of norm here and lazy to type. I love Japan and have Japanese friends too, they don't find it offensive at all. Further, it's a norm where ever I've been people use Honky for HK, Sing for Singaporean, UK for Scottish, Aust/Aussie for Australian etc etc. Without going into political/cultural difference debate, I sincerely apologies if the use of "Jap" made you feel uncomfortable, my bad and laziness.
Not really understanding your sentence here:
"If you want to know what the program you linked to can do, why not ask the company that produced or is selling it? Without researching the program, it is just my guess that your desires overshadow the actual capabilities of the program in terms of altering the core capabilities of the OS."
As far as I've read from people's experience, other than flashing the entire ROM, installing CE-Star or tweak the register (or whatever terminology that is more technically correct) seems to not 100% solve the issue and also creates problem, instability. To me, it's understandable since installing software on PCs hinders its performance, so of course same with Mobile... hence my preference of not 'tweak' or install 3rd party softwares. This brings the point that although I agree the need to jump in and risk, but it's not really the fear that stops me doing so. In my opinion I can always hard reset if problem occur, but I really do not want to do that with phone at regular interval like formating a PC.
I totally agree that if I want both of my features to be satisfied, is to buy local (Australia) and flash the entire ROM to the English (Asia) ROM. Now this option was only made to my awareness when I confirmed the HK version of HD2 is capable of reading Chinese (btw, it's Traditional Chinese I want, so this should be fine). I understand this can be done now, but with non-official-HTC ROM. (correct me if I am wrong).
The other problem is of course price. The phone is not officially out here, but it's expected to be at least 50% more expensive. The old HD model is selling here almost twice the current HD2 model in HK. So even though I now seem have the option of flash local model with Asia ROM, I have to factor in the steep price difference vs. ability of using 850Mhz (as oppose to 2100Mhz).
I do not think you've put me off or anything, I totally found your posts great with total appreciation. And I sincerely apologise if my wording is offensive to you, it was not the intention at all. Thanks once again for your assistance
Now you're offended people from another 3 areas
Honky for HK, Sing for Singaporean, UK for Scottish, Aust/Aussie for Australian
Click to expand...
Click to collapse
Apologise or suffer.
I apologise... I am sorry... don't punish me
squall09 said:
I apologise... I am sorry... don't punish me
Click to expand...
Click to collapse
Don't bother apologising - you're being teased
Haven't tried the link you mentioned but to get Asian fonts to display on English (or whatever) windows mobile you just need the right fonts, and to set the default font to be that. Personally I've been using Asukal's brilliant Japanese Support cab to display Japanese characters on my phone, since I listen to loads of Jpop and me wife's Japanese
Anyways here's a quick and dirty useful google link to get you started. Glanced at it, mentions something about CJK so that should have you covered: http://forum.brighthand.com/showthread.php?t=217045
EDIT: Note that this doesn't mean you can definitely write in Chinese. Plus Sense still won't recognise the Asian characters for some weird reason (at least the music player anyways)
aussiebum said:
EDIT: Note that this doesn't mean you can definitely write in Chinese. Plus Sense still won't recognise the Asian characters for some weird reason (at least the music player anyways)
Click to expand...
Click to collapse
You mention music player won't recgnise Asian charac's, does that include if you flash with Asian ROM? I would be pretty surprised if the Chinese ROM can't read chinese, then the music player for Taiwanese model is practically useless isn't it??
squall09 said:
You mention music player won't recgnise Asian charac's, does that include if you flash with Asian ROM? I would be pretty surprised if the Chinese ROM can't read chinese, then the music player for Taiwanese model is practically useless isn't it??
Click to expand...
Click to collapse
You see, I'm not using an Asian English ROM Maybe that one allows you to display CJK properly, maybe not. The resources I posted earlier basically allow you to at least see CJK characters, something not possible before without something like cestar (or whatever that prog was called.. can't remember now)
squall09 said:
I am not sure why you got the impression I did not appreciate your assistance. Maybe I should've said you were the one convinced me? I am sorry if I made you feel that way, but in fact, i found you were the most helpful in that thread, so thanks lots That thread talked much about 3rd party software (not my preference) or the English (Asia) ROM. My intention of this thread is simply asking if ppl have tried that.
Second apology about using "Jap" for Japanese. I had no intention of offensiveness, it's kind of norm here and lazy to type. I love Japan and have Japanese friends too, they don't find it offensive at all. Further, it's a norm where ever I've been people use Honky for HK, Sing for Singaporean, UK for Scottish, Aust/Aussie for Australian etc etc. Without going into political/cultural difference debate, I sincerely apologies if the use of "Jap" made you feel uncomfortable, my bad and laziness.
Not really understanding your sentence here:
"If you want to know what the program you linked to can do, why not ask the company that produced or is selling it? Without researching the program, it is just my guess that your desires overshadow the actual capabilities of the program in terms of altering the core capabilities of the OS."
As far as I've read from people's experience, other than flashing the entire ROM, installing CE-Star or tweak the register (or whatever terminology that is more technically correct) seems to not 100% solve the issue and also creates problem, instability. To me, it's understandable since installing software on PCs hinders its performance, so of course same with Mobile... hence my preference of not 'tweak' or install 3rd party softwares. This brings the point that although I agree the need to jump in and risk, but it's not really the fear that stops me doing so. In my opinion I can always hard reset if problem occur, but I really do not want to do that with phone at regular interval like formating a PC.
I totally agree that if I want both of my features to be satisfied, is to buy local (Australia) and flash the entire ROM to the English (Asia) ROM. Now this option was only made to my awareness when I confirmed the HK version of HD2 is capable of reading Chinese (btw, it's Traditional Chinese I want, so this should be fine). I understand this can be done now, but with non-official-HTC ROM. (correct me if I am wrong).
The other problem is of course price. The phone is not officially out here, but it's expected to be at least 50% more expensive. The old HD model is selling here almost twice the current HD2 model in HK. So even though I now seem have the option of flash local model with Asia ROM, I have to factor in the steep price difference vs. ability of using 850Mhz (as oppose to 2100Mhz).
I do not think you've put me off or anything, I totally found your posts great with total appreciation. And I sincerely apologise if my wording is offensive to you, it was not the intention at all. Thanks once again for your assistance
Click to expand...
Click to collapse
Apologies accepted, and I am gratified that you found some of my answers helpful. And, sorry if I jumped on your case too severely.
Actually, so far, no HardSPL has been developed for the HTC HD2, so the ROM that the guys in the other thread were flashing their Taiwan bought Chinese version HD2s to is the official HTC ROM version that comes with the English version of the phone that is being sold in Hong Kong.
What HardSPL does is allow one to flash to an unsigned ROM, or, in other words, a cooked ROM. So, if you flash with the ROM mentioned in that post, you can be assured it is a stock ROM from HTC.
Unfortunately, if someone does something foolish while flashing a phone, such as using the wrong ROM for the phone, it is entirely possible to turn your phone into an expensive brick that no amount of hard resets will cure, so caution is always advised. It has been done too many times in the past by too many people.
What I meant about the program you linked to is it most likely will not be able to give you all the functionality you want in the phone. I did follow the link for you, and what it actually is is a cab file for sunglobe's cab that installs traditional Chinese fonts on a WinMo phone. I have sunglobe's fonts on my older HTC phone, and can view Chinese with no problem.
As stated in other posts in this thread, if these fonts work well with the HTC HD2s new capacitive screen remains to be seen, and finding a software keyboard that could use those fonts and be compatible with the new screen technology may really be problematic. You might end up with being able to read most of what you want in Chinese on the phone, but not being able to type.
The 3G band problem surely is your hardest hurdle to jump over, as with recent HTC phones it has not been possible to do anything to enable more bands. That is a real bummer that makes these phones truly not worldwide. If you did not care about 3G data speeds, you could get the phone from Hong Kong,with no need to flash, but you would be limited to GSM speeds with data.
I held the HTC HD2 in my own eager hands last Saturday when I went to my carrier to pay my bill. If I had not recently spent a fair amount of money upgrading my computer............. The hardware is really stunning.
great to know apologies accepted, I really did not intend to be offensive or lack or appreciation.
Firstly, if I use incorrect terminology, I apologise as I am no expert in all this, so do excuse me if I do not follow exactly your knowledge when it comes to Flash, tweak etc.
So maybe to clarify...
1) HardSPL sounds to me equivalence of formatting your PC HDD and do a clean install of Windows;
2) Contrast, flashing a ROM is similar, but without formatting the HDD, bit like reinstall Window but no format. Am I on right track here?
3) HardSPL is official from HTC or phone provider; ROM can be official or non-official
4) Both HardSPL and ROM are like *.exe files and can be installed via PC once you d/l the file to PC
Hopefully my understanding is right. Assume yes, then I think the best way is for me to buy Australia's model (still waiting on price/release date) and flash the English (Asia) HardSPL or ROM.
My concern is, does the HardSPL or ROM have to match the locality of your phone? i.e. if I buy Australia, I have to use Australian ROM?
thanks.
squall09 said:
great to know apologies accepted, I really did not intend to be offensive or lack or appreciation.
Firstly, if I use incorrect terminology, I apologise as I am no expert in all this, so do excuse me if I do not follow exactly your knowledge when it comes to Flash, tweak etc.
So maybe to clarify...
1) HardSPL sounds to me equivalence of formatting your PC HDD and do a clean install of Windows;
2) Contrast, flashing a ROM is similar, but without formatting the HDD, bit like reinstall Window but no format. Am I on right track here?
3) HardSPL is official from HTC or phone provider; ROM can be official or non-official
4) Both HardSPL and ROM are like *.exe files and can be installed via PC once you d/l the file to PC
Hopefully my understanding is right. Assume yes, then I think the best way is for me to buy Australia's model (still waiting on price/release date) and flash the English (Asia) HardSPL or ROM.
My concern is, does the HardSPL or ROM have to match the locality of your phone? i.e. if I buy Australia, I have to use Australian ROM?
thanks.
Click to expand...
Click to collapse
You are getting closer! Don't worry about not understanding all the terminology in the beginning. It is really hard to get it all down unless you actually have the hardware at hand to experiment with.
Whenever you flash a ROM it is just like a clean install of an OS on a computer. Think of it as installing Windows 7 on a computer with Windows XP. All your settings and programs are gone, but you have a shiny new operating system.
Sometimes it is a problem flashing to a new ROM issued by HTC because of the CID, or country identification. Without some wizardry, you would not be able to install the official HTC English Asian ROM on a phone you buy in Australia. This problem has been solved, so if you do buy the phone in Australia now you can be assured that you can flash to the official HTC ROM you need with Chinese support.
What HardSPL does is allow you to flash a ROM that is not issued by HTC, and, if I am not incorrect, also easily allows you to overcome the CID problem all in one step.
So, as you can guess, HardSPL is not from HTC and it is not something that HTC or carriers are particularly fond of, to say the least.
Don't worry about not understanding all of this at once. It is great that you know now what you want, and are asking the right questions.
Despite the cost, to get the right 3G bands, and the Chinese support, I think you are on the right track now with buying the phone in Australia and flashing to the official HTC English ROM.
What part of Australia are you in? One of my former students is a constable in Melbourne.
So it sounds like to me Flashing a ROM is the same as HardSPL.... except one checks the origin of your phone (bit like how some MS apps checks your hardware).
Now excuse my ignorance, but bit confused by your 3rd paragraph:
"Sometimes it is a problem flashing to a new ROM issued by HTC because of the CID, or country identification. Without some wizardry, you would not be able to install the official HTC English Asian ROM on a phone you buy in Australia. This problem has been solved, so if you do buy the phone in Australia now you can be assured that you can flash to the official HTC ROM you need with Chinese support."
I am confused because first you indicated potential of CID issue, and hence the need of 'hack'. But you then said this problem has been solved. So isn't then ROM and HardSPL are identical? Really sorry about my lack of knowledge, but just can't distinguish between the two yet... other than the fact HardSPL is unofficial, and ROM can be either official or non-official
Well, at this stage I still have to wait till Australia get the release of the phone. As far as I've seen in the past, the telecom in Australia will 'customise' the phone a bit, so I am really hoping I can still flash the English (Asia) ROM from HTCpedia. I've been told to backup as soon as I get the phone so I can restore to 'telecom factory setting' if need arise.
thanks once again
squall09 said:
So it sounds like to me Flashing a ROM is the same as HardSPL.... except one checks the origin of your phone (bit like how some MS apps checks your hardware).
Now excuse my ignorance, but bit confused by your 3rd paragraph:
"Sometimes it is a problem flashing to a new ROM issued by HTC because of the CID, or country identification. Without some wizardry, you would not be able to install the official HTC English Asian ROM on a phone you buy in Australia. This problem has been solved, so if you do buy the phone in Australia now you can be assured that you can flash to the official HTC ROM you need with Chinese support."
I am confused because first you indicated potential of CID issue, and hence the need of 'hack'. But you then said this problem has been solved. So isn't then ROM and HardSPL are identical? Really sorry about my lack of knowledge, but just can't distinguish between the two yet... other than the fact HardSPL is unofficial, and ROM can be either official or non-official
Well, at this stage I still have to wait till Australia get the release of the phone. As far as I've seen in the past, the telecom in Australia will 'customise' the phone a bit, so I am really hoping I can still flash the English (Asia) ROM from HTCpedia. I've been told to backup as soon as I get the phone so I can restore to 'telecom factory setting' if need arise.
thanks once again
Click to expand...
Click to collapse
Almost there. I guess my explanations are not explaining very well. You can, when you have time, check the excellent tutorials on XDA Developers.
A ROM can be an official ROM from HTC or a cooked ROM that is not from HTC or carriers. If you want to flash a cooked ROM you have to use HardSPL.
If you want to flash an official HTC ROM you can do it easily as long as the CID matches your phone. If the CID does not match, as would be your case with you if you flash the English Asian ROM from HTC to your phone, you need something like the Gold Card method to circumvent the CID check. In this case, you still do not need HardSPL, as you are flashing with a signed genuine HTC ROM.
You are absolutely right that you should have a backup of the ROM that came with your phone so that in case you are in need of hardware repairs you can return it under warranty. Even flashing to an official HTC ROM from another region or not the branded ROM from your carrier would void your warranty, so a backup ROM is really crucial.
well, guess these terminologies (SPL, flash ROM, cooked etc) are all fairly new to me, it is difficult, but it's good from my end someone is willing to tolerate ignorant ppl like me.
So by the sound of it, flashing a ROM (official or non-official) seems to be not as straight forward as like reinstalling a PC or press the *.exe file. It sounds like to do what I wish to achieve, there is some degree of risk (especially for someone unfamiliar with it) as well as numerous steps involved... of course, unless there is an unofficial HardSPL that is around... (in which my guess those from HTCpedia are not, am I correct?)
I've heard some softwares like SPB Backup, PIM Backup, or Lookout. But not sure if any of these can backup the ROM from vendor.
squall09 said:
well, guess these terminologies (SPL, flash ROM, cooked etc) are all fairly new to me, it is difficult, but it's good from my end someone is willing to tolerate ignorant ppl like me.
So by the sound of it, flashing a ROM (official or non-official) seems to be not as straight forward as like reinstalling a PC or press the *.exe file. It sounds like to do what I wish to achieve, there is some degree of risk (especially for someone unfamiliar with it) as well as numerous steps involved... of course, unless there is an unofficial HardSPL that is around... (in which my guess those from HTCpedia are not, am I correct?)
I've heard some softwares like SPB Backup, PIM Backup, or Lookout. But not sure if any of these can backup the ROM from vendor.
Click to expand...
Click to collapse
Ya, there is always some risk in flashing a ROM, just like installing a new OS on a computer, or updating to a newer OS.
So far there is no HardSPL for the Leo, but that need not worry you, as all you want to do flash to is an official HTC ROM from another region. Your only worry is circumventing the CID.
The programs you mentioned backup personal settings and possibly programs (depending on the program), but they do not backup ROMS. To backup a ROM you have to do what is called dumping a ROM. This is an area I am not very familiar with, and I do not know if anyone has successfully been able to backup a ROM from an HTC HD2 yet. This phone uses Qualcomm's new 1GHz Snapdragon™ processor. It has new technology that has to be analyzed, and that I believe is why such things as developing HardSPL for the HD2 is more challenging.
Perhaps a more tech savvy person here on the forum can tell you if and how you can dump (and how to restore) an HD2 ROM, or if I get some time I will do some research for you.
As I think I said before, all of us were new at this at some point. Many of the members have been very helpful to me in the past and I am more than happy to help a new guy (or gal) get his/her feet wet. It is the way a forum like this should work, yes?
Thanks for your help and offer of research, but I think it's too much to ask, I feel bad. Let's just hope some thread will come up soon...
Regarding to the CID issue, is there anyway of knowing in advance? Is that a local distributor setting or HTC setting?
Can I ask which is easier to do - HardSPL or Flash a ROM? Though no HardSPL now, but surely sometime in the future will have one right?
It's so hard to decide whether to buy the Australia version and take the risk to Flash or HardSPL, something I will likely need to do each time there is future updates. It is expected the local Telecom boost the price like mad for the 850Mhz band, don't want it to be a brick if I ruin it each time I risk updating!!! Part of me feels like to just go for the HK version. Assuming updating ROM is easier, this will make my future life easier with each upgrades from HTC, am I correct?
Thanks heaps... it's good to have someone understand my desire of wanting English interface but also Chinese capability. The usual forum I go to is local, so not many responses regarding to this matter...
squall09 said:
Thanks for your help and offer of research, but I think it's too much to ask, I feel bad. Let's just hope some thread will come up soon...
Regarding to the CID issue, is there anyway of knowing in advance? Is that a local distributor setting or HTC setting?
Can I ask which is easier to do - HardSPL or Flash a ROM? Though no HardSPL now, but surely sometime in the future will have one right?
It's so hard to decide whether to buy the Australia version and take the risk to Flash or HardSPL, something I will likely need to do each time there is future updates. It is expected the local Telecom boost the price like mad for the 850Mhz band, don't want it to be a brick if I ruin it each time I risk updating!!! Part of me feels like to just go for the HK version. Assuming updating ROM is easier, this will make my future life easier with each upgrades from HTC, am I correct?
Thanks heaps... it's good to have someone understand my desire of wanting English interface but also Chinese capability. The usual forum I go to is local, so not many responses regarding to this matter...
Click to expand...
Click to collapse
For CID, for sure an HTC phone bought in Australia will have an Australian CID. It is encoded in the factory, I believe. Probably the reason for CID is that HTC is only allowed to sell a language version of Windows Mobile in a certain region or country. It is all about licensing. I did that research for one of the other guys on the previous thread. For example, HTC cannot according to licensing terms sell an English HTC HD2 in Taiwan.
With that said, do not be daunted by all of this. Once the HardSPL is out and you use it once on the phone, you will be able to flash to any ROM you want, without using HardSPL again. The only reason to worry about CID now is that HardSPL is not yet out for the LEO.
If you have ever flashed an update to the BIOS of your computer, then you surely will be able to flash a ROM to your phone. What I suggest is that you download the Asian English ROM and expand it into a folder. Included is a Word file that explains in detail the flashing process. Even though you do not have the phone yet, you could even start the Rom Update Utility just to see what it looks like.
Don't worry, I do understand why you need the Chinese support. I would guess that since, as I recall, you bought a Motorola phone in Taiwan before, chances are either you were born here, or your parents are from here, and you still have family here. That would mean you are really part of two cultures. I need the same configuration as you, because English is my native language, but I need the Chinese to read things like SMS.
Unless you like trying cooked ROMS like me, it is not likely that you will flash ROMS on your phone very often. HTC and most carriers are not too fond of issuing new ROMS for a phone, unless there is a major bug that needs fixing. These companies would much prefer that we buy new phones.
Ya, try downloading the ROM and checking it out a bit after expanding it into a folder. Then, you can wait and see what your carrier will charge, and decide how much full 3G band coverage is worth to you. Let me know any more questions you have after you download the ROM.
I think I am getting a bit more now... so HardSPL essentially will over write the whole phone into a "region free" phone kind of... which allows me to use any ROM.
Question then on HardSPL... I take it's not a simple matter of double click a file and it will run itself via a PC right?
I will download the HTCPedia's ROM when I can (internet usage almost up, the file is pretty big) and see what's in there. Though one question, why is the file *.exe? What does it execute? Will I need the phone plugged in already?
Yes, I was born from Taiwan, hence listen to much of the Chinese/Japanese songs, and it would be sad if the music player displays symbols when I play songs...
thanks for sharing your knowledge
Once you see the word file that comes with the ROM you will understand much better. If you do not want to use up your bandwidth downloading the ROM you can PM me, give me your email address, and I will forward the Word file that comes with the ROM to you. It can all be as simple as connecting your phone to the computer, making a connection with ActiveSync, or Windows Mobile Device Center, and clicking on a file, and then a few more clicks. Finally, in the process, one sits back, says a short prayer, and waits.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In the meantime, check out the XDA-Wiki and read the glossary. That explains all these terms better than I can.
I saw the HTC HD2 again today at the Taipei Computer Association's Infomonth Exhibition in the Taipei World Trade Center. What I saw was a working model, and it sure was sweet. The Chinese version was fast and smooth. I got to see several of my former TCA colleagues today too, so not a bad day.
Chinese support for WWE rom
Hi.
My lady is Chinese.
I gave her my old Polaris when I bought my HD and then I gave her my old HD when I bought a HD2.
She doesn't want a Chinese rom as she can read and write English but she wants to be able to send/receive texts and emails in simplified Ch to friends & relatives.
I found the exact right rom for her Polaris, and have now loaded software support for Ch on a WWE rom on the HD.
Look for a guy called Debboy who does roms in Thai & Ch.
Also, look for HWPen_Olympic_Version.CAB and Samau_CP61.cab.
HWPen supports Ch simplified & Trad & Jp.
It is dependent on hand writing which may not work well on the capacitive screen.
Hope this helps.
Also useful is cdict_ppc_setup.exe , a Ch to En dictionary.

Some Conclusions

Dear all
It is my lunch break!! So I have some free time to post some conclusions I reach them after reading many threads in many forms regarding the HD2 t-mobile.
Whenever you looked, there were people says, DON’T do that it will break your device it will burn the motherboard, you will lose it forever it will died, etc..
For a moment, I am scared and changed my mind to get this device!!(I had an universal HD2 for about 3 months and sold it to get the t-mobile because of the RAM and ROM).
It is so simple, my understanding is as follows:
The MAIN/MAJOR problem is the radio, DON’T TRY TO INSTALL ANY RADIO contain the number 51, and/or STOCK HTC ROM for any language because usually the radio is included on that.
You can do the HSPL simply and you can flash it with any custom rom designed for HD2 (noting that there is some rom designed for t-mobile supports the additional/hidden RAM size ) and the rest will treat your device as a normal HD2 512 RAM. READ CAREFULLY IF THE ROM INCLUDED A RADIO.
For Android, you can install whatever you want, because they are depending on SD card and don’t use any windows/rom files.
There are my simple thoughts in this respect, if I am wrong in any part please correct me, because this what I am planning to do with my device, once its arrived (within a few days).
SORRY FOR MY BAD ENGLISH, I HOPE IT WOULD BE BETTER in the next time
Yes, you are correct. For the most part any ROM will work on the T-Mobile HD2 EXCEPT for official HTC or other carrier ROMs besides T-Mobile USA ones. And yes, flashing a radio with XX.XX.51.XX WILL brick your device and it will be unuseable. Just read the stickies and play it safe. If you don't feel comfortable with a step, DO NOT DO IT until you have either read enough to feel confident or asked someone. Hope that helps!

[Q] Experienced flasher but new to HD2 - need advice

A little background: I have been flashing other phones for over a year with no problems, so I normally can find my way around these things. The HD2, however, has proven a bit more confusing because of the tmous (mine) Vs international version. I have been doing a lot of research so far. Each day, however, I find reports of bricking (some unfounded, some terrifyingly real), I need some advice from my more seasoned fellow XDers.
Here is my scenario: I bought a T-Mo (US) HD2 to use as a tablet, mainly since I have a Sprint TP2 I intend to continue to use for the moment. This means that I am only using WIFI data. I have been using Android SD ROMs successfully, and they run smoothly. This is the extent of my progress so far.
Here is what I want to do: Flash WP7 and continue to use Android on SD. Should WP7 totally suck, I want to try NAND versions of Android not available on SD.
My concern is that some tools are appropriate for my handset, some are not. Of the former, some are not appropriate for WP7, some are not. I am not too worried about bricking the device since I'm not flashing WinMo ROMs on this one. However, I don't know if I HAVE to flash a radio as prescribed in many threads, since I'm only using WIFI. I have read about issues flashing wrong radios and screwing up a perfectly good device. Lastly, has anyone heard of a ROM for an HD2-as-tablet? I'm sure I'm not the only one needing this!
Your advice would be most appreciated. Thanks in advance!
P.S. I am familiar with the super-awesome noob guide http://forum.xda-developers.com/showthread.php?t=653614, and found it very helpful. I'm just making sure I know what I need to know before I take the plunge.
TMOUS HD2 takes XX.XX.50 radios, Flashing a XX.XX.51 is a sure way to brick. however a brick does not mean the phone is trash there are a few guys on Ebay that can fix it using JTAG pretty cheap. Read the stickeys they are how I got started. The radio is the big thing though other than that this phone is really forgiving. especially after loading HSPL and MAGLDR!
As above the wrong radio is the only real sure fire danger, which boils down to "never ever flash any stock rom except tmous stock roms" (or 51 radios, or 2.04.50 and 2.05.50 which also act like 51 radios.)
Its easy to avoid,since all tmous phones naturally come with a ..50.. radio that works with magldr and such, so no,there is no need for you to flash a radio, you can skip that step.
Thank you I was not aware of those two radios, I immediately went to my little archive I have built up over time to make sure I didn't have those since I have been going back through my radios lately to see if I can get better reception in my house. Luckily those weren't in there.
Sent from my HD2 using XDA App
you should also probably avoid 2.06.50 too, , without digging through the threads im not sure ive got it right with 2.4 and 2.5, it may be 2.5 and 2.6, since they are the two that come with the very first tmous test roms ( the first two links in the 'tmous stock and test roms' thread)
The first tmous shipped phones came with radio 2.08.50 so i see no reason why anyone would wanna go lower than that.
Thanks to you both. I think I will give NAND a try this week. Now I feel more confident I will not cause more headache than it's worth.
I really like the HD2!

Categories

Resources