touch pro 2 tweaks, some work on Imagio - Imagio General

http://forum.ppcgeeks.com/showthread.php?t=78019&highlight=tp2+tweaks
I downloaded a few of the cabs from this thread and the results are listed
bg for all pages-nope does not work-messes up the clock
Disable Auto Device Lock-worked after 2 soft resets
Disable SMS sent-works!
Enable All Camera Modes-WORKS!!!
Manilla Start Menu Unlocker-works
Show Hidden Phone Settings-Not works=(
those are the ones that I tested, if someone else is brave, please post your results..

Show Hidden Phone Settings works for me

which settings are now shown?

Location Setting
Current Country
NBPCD Current Country
TTY Mode
Voice Privacy
Network Service
Time Synchronization
Voicemail
Plus Code Dialing
Emergency Call Alert
Switch NAM

Enable all camera modes did nothing on my Imagio...

hey guys, the no top and no bottom curtains cabs work on my imagio. I also got the background all tabs cab that works in the imagio setup guideat ppc geeks. I don't know how to post these cabs or I would. hope this helps.

can you copy/paste links?

http://forum.xda-developers.com/showthread.php?t=551614
here is the link for the background all tabs cab. be sure to download the manila 2.1 1919 cab. that's the one that I have working on my imagio. will look for link to the over cabs and try to post it also. hope this helps you.

I am dying for the no curtains cab. Badly.
My Imagio Has Manila 2.0.38937.1, I think. I got that version number by going to Settings, the scrolling to the bottom where it says "About".
Is that the place I need to be looking for my Manila version or is it somewhere else? How do I find my Manila version?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

at0mangs tab modification works.

Enable all camera modes definitely worked on mine.
Edit: Nix that, it enables the display of the new camera modes but so far they all just cause the camera application to hang and require a soft reset to get the camera working again.
Ok I'm an admitted newb (Imagio is my 1st WinMo phone). I have 2 questions.
1. What are the "curtains" that "no curtains" removes.
2. I've seen several screenshots around here where people have customized the UI. (Different icons, skins, etc...) Do these kinds of tweaks require more resources than the stock UI? 'cause some of them look pretty cool.
Thanks

Curtains are the translucent background behind the carrier name at the top and the tab icons at the bottom in TouchFlo 3D.
As for the resources, for the most part any differences are inial, although I am sure there is a small impact, larger storage and so forth.

Related

New iBliss 3G dialpad

Hey guys,
I got the iBliss dialpad skin from crash (in the wisbar forum) and updated it so that it's compatible with 3G phones. Here are some screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now, I still can't seem to work out which file overlays the brightness bar (video call => click brightness button). If anyone can help me on that I can then finish off the skin.
Note that the installation cab overwrites your phcanrc.dll in your windows directory. You might like to back that up first.
thanks, i have installed it and its very nice one
looks very nice, thanks
can someone post a picture? I don't want to install it before I know how it looks like
...and does using this require you to have Wisbar installed on your device? oh yeah, pictures would be appreciated. thanks...
Absolutely great work
I have one request, if I may...Could you make the photo larger inside the phonepad, I love the looks, but there's plenty of room to make the photo with "normal" calls twice the size...pretty please...
Very great work, thank's
i have a question.
how i can have "keypad" button (left softkey in picture 3) when i do a call
now i have contacts there
Is this project still alive at all? Im having issues with this not displaying anything correctly on a Touch. Worked on a cooked rom, but i installed in on a new rom that didnt have it and now it looks all jacked up.
David
RayEarth said:
Hey guys,
I got the iBliss dialpad skin from crash (in the wisbar forum) and updated it so that it's compatible with 3G phones. Here are some screenshots:
Now, I still can't seem to work out which file overlays the brightness bar (video call => click brightness button). If anyone can help me on that I can then finish off the skin.
Note that the installation cab overwrites your phcanrc.dll in your windows directory. You might like to back that up first.
Click to expand...
Click to collapse
This does not display any numbered buttons for me with FInixNOver3.4 Black Edition
So I'm going to have to hard reset my device...

Any way to set background image for top/bottom bar w/o Wisbar or other apps?

Like the title says - is there any way or some small utility to apply background image for top and/or bottom bars? (I know You can't make them simply transparent).
I have tried Wisbar, rlToday etc, they are all either doing too much on the side, consuming way too much memory or just buggy. I've also searched this forum but as the bars have too many names (top bar, taskbar, menu bar, start bar etc.) I've come up with nothing really...
What I would like to achieve is something like this (image from ultimatelaunch.de):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please help.
i asked that before
it is another tool by the ultimate launch author called skinmobile:
http://forum.xda-developers.com/showpost.php?p=1916467&postcount=28
OK, thanks!!!
I'll look into it later (or tomorrow) as I don't have my device with me atm. But it sure seems what I am looking for considering what I have seen and that it's small
you can also use vijay555's todayToggle to remove either or both of them, and just show the background image.
who really needs the bottom bar anyway, if someone can't remember what the two (big number) launches are, what are they doing playing around with ppcs?
it's a tiny exe (9.5kb) that you can leave in your windows\startup folder.
Then edit the registry to choose the size, the exe basically shrinks the bars to 2pixels but you can choose any size you want
Okay, thanks for the tip!!!
By the way - I've seen screenshots of taskbars with icons representing running applications just like in normal desktop PC. Besides MagicButton and WKTask and maybe Wisbar (not sure), are there any other apps (small) or registry hacks that do this? It seems that all these applications address a multiple changes in the system, I am trying to locate utilities that do just that one little thing - show running application icons on taskbar (next to start button).
i use wktask and set it to do absolutely nothing except show the running tasks.
it does'nt seem to me that it slows down or causes any problems
OK, thanks for the tip! Gone try it that way.
By the way Skinmobile is buggy on my WM6, so that app kind of sucks...
yes its a bit buggy but you can edit the ini file and graphics and try a bit around. i had it running without any problems on wm6.1
Naah, I'll just leave it to that and wait for better apps. The "see-thru" effect isn't worth it, if its buggy. For me at least. The buggyness seems to appear when I click on any of the taskbar icons. Although I didn't do a soft reset after running the prog. Should have I done it? Would it change anything?

T-Mobile TP2 - MyFave TF3D Hack - Display both Clock (aka Home) & MyFaves in TF3D

In order to show both the Clock aka Home tab & MyFaves tab in TF3D, edit the following registries;
HKEY_CURRENT_USER\Software\HTC\Manila:Manila://home.page.hidden
HKEY_CURRENT_USER\Software\HTC\Manila:Manila://myfaves.page.hidden
Both are DWORD's, 0 to show, 1 to hide.
Screenshots (NOTE: I don't have SIM Card in, I hacked the registry to make it show & most likely why the Contact Icons are messed up);
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
don't have myfaves & never saw the tab before. i have seen that registry string but never messed with it. this worked. cool. only thing is that i don't get any settings for it. but still cool to test.
xnifex said:
don't have myfaves & never saw the tab before. i have seen that registry string but never messed with it. this worked. cool. only thing is that i don't get any settings for it. but still cool to test.
Click to expand...
Click to collapse
You must have the MyFaves Service on your account otherwise the updater disables the app's GUI & any part of the app itself from launching which is most likely why you don't see settings & also why you never saw the page.
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\My5\SMSC\CmdGet\StateRequest]
"ClientUIOnOff"=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\My5\SMSC\CurrentState]
"ClientUIOnOff"=dword:00000000
Means GUI is turned off. Changing to 00000001 should make it display.
Hi,
i am working now around 2 month on that.
Not the whole time ;-). But sometimes i
hacking my registry very deep and i find
some nice things.
MyFave can be found multiple times here
on XDA. So after my investigation in had
have a nive mY5 screen. Deinstalled yet,
but i think i will startup again to share some
things here !?....
Edit 16:06 - 30.09.2009:
Actually i working on it ;-). And you don't need the service from the great T.
I will prepare the app on a way that you don't need this service. On the TP2
teher is a favorite page but this is a nice to have page for TF3D.

Flash Pimp Clock

Loved the original idea from here:
http://www.tokyoflash.com/en/watches/pimp/p2pusher/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Its basicly a different visual clock, to read the hours see the left vertical columns and for the minutes see the right 5-rows columns.
The PDF on the site above explains it better...
To use:
---------
- 5 colors to choose from, just press the bottom bar to change colors.
- If you prefer a 12-hour clock, simply click the left numbers after 13h.
- Exit with enter (keypad) or by pressing the top-right area.
- See the "normal" digital clock and date by pressing anywhere else on the screen.
Notes:
-------
- Needs FLASH 7, if it doesnt exit properly, you dont have it.
- Attached the CAB, already with the WM6.5 icon on install.
- Also added a separated swf file, to see it run on your NOKIA, PC or Throttle Launcher..
Enjoy.
Nice idea
Love it! thanks!
it would be cool if it can be a screensaver.
thanks twolf!
WQVGA issue omnia
just wondering if there's a way to make the excess screen on my omnia to default BLACK- then your app would be awesome
maybe even add function buttons - there's some promising update potential
awesome clock - would it be possible to simulate the look of a recessed L.E.D.?
looks good on my armband at the CLUB!!!
Great...very cool with the color options!
Sorry, the software I use for the EXE only allows VGA/QVGA, he doesnt even allow any extra options for the size or screen color.
Use flash pimp clock
I need a macromediaflash for use it. someone can help me?
found it
Yes, yes my first app for the htc diamond.
it`s fantastic........... I`m cry
Standalone app?
Just wondering... what is the program you are using for these standalone apps? I could probably use the same thing to make my own FlashGadgets play as standalones, which would make them work across a broader series of device platforms. Please check out my thread, and tell me what you think. http://forum.xda-developers.com/showthread.php?t=630985
Regards,
Unit ZER0

New mail notification: weird image displaying

I couldn't find another thread for this problem, then again I found it hard to find words to describe the problem so I'm just gonna go ahead and post a screen shot
Anyone else come across this and/or have a fix?
Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For some reason the picture wasn't displaying in my first post above so here it is! As you can see the new mail number in the green circle is covered by the square slider... the speech bubble was however added by me to brighten up your day.
Friendly bump
All I can say is that that's obviously not standard behaviour.
Have you installed many theme mods?
What extra software have you installed on the device? I don't recognise the 2 icons on the top right as being standard (well, not for me). I'm guessing that the horizontal stretching in the image is not representative of your device? On my HD2 the envelope is more square. Does this happen on all you email account icons? I see you have 3 accounts.
Regards.
thanks for the response guys. to start off with, the ROM i have is 2.01, and i found the download link for it buried somewhere in the 2.01 ROM thread right here in these forums. i didn't know it at the time but it was a cooked rom as the top right icon in the status is actually a task manager drop down menu that has been there since i installed the rom, as well as some other programmes that are not stock.
however to my memory this graphical anomaly shown above was not present from the beginning... yes, it happens to all of the email accounts.
In terms of theme mods i did install HDwall but then uninstalled it as i stupidly didn't realise that it didn't work properly with manila 1922 (if i recall). i made the same mistake with max manila and also uninstalled that. my biggest problems came after trying out dome bg4alltabs mods and 16/20 quicklink shortcut mods, which i should point out that i had trouble completely uninstalling, though they no longer appear in the application list. i believe that the 20 quicklinks mod graphically messed up my home screen by removing all the quicklinks (not even the outlines remained) and causing an ugly grey box to appear on the.home screen which covered part of theleft handside of the clock...?
i can't be bothered to hard reset over this at the moment... i guess one way to perhaps solve it would be if some of you guys kindly posted the relevant stock registry entries on here that are relevant to the problem or indeed relevant to those theme mods that have been uninstalled, as maybe there are still remnants of them left.
however i realise this is near impossible for any one to know the ins and outs of the registry entries that well, at least that's what i feel in my inexperience, so if not then no worries, i can only thank you for your time which i will do gladly

Categories

Resources