Hi. I was wondering if there's a particular software that allows to schedule turnoff and turnon pocketPC running wm6.1? Each time I shutdown my i780 before going to sleep and switch on when I wake up (I don't like to keep my phone always on). I was thinking of a software that can do this for me
I found psShutXP, but it's not working properly.
Thnx for sharing your findings guys
cheers
I use g-profile to turn the phone, wifi, bluetooth, etc. off for the night.
Related
Hello,
In the past I am sure that my display screen went off after a certain time during a phone call (saving on battery life). I have noticed recently that the screen stays on the whole time, regardless of call length. I have looked through all the settings I can think off, and can't seem to find one relevant to auto screen shut off during a call.
I have installed Pocket Bluetooth Tools and PocketZenPhone (previously I was using Myhonerofiles).
Is there a setting I am missing, or some software that I can use to have an auto screen shut off during a call.
Many thanks for any help.
The screen will not turn off if Bluetooth headset is being used.
Normally, the screen will not turn off if there is any serial port activity (like while connected through activesync)
Are you sure that in Settings/Backlight/Bttey Power: the "Turn Off Backlight" option is selected?, it should be selected to turn the device screen off after 30 seconds or so.
I use a car kit running on bluetooth, and the screen goes off after 30 seconds!
I've set both the power and the back light to go off after 1 minute. There is not normally a problem and the screen powers off ok, unless I'm on a call (with or without a bluetooth headset).
There is an option in JGUI Phone Profiles that does this.
If you no longer have it installed then you won't get that effect.
When I uninstalled Phone Profiles I missed the screen off option so much I reistalled it just for that.
Effan said:
The screen will not turn off if Bluetooth headset is being used.
Click to expand...
Click to collapse
mine does.
Effan said:
The screen will not turn off if Bluetooth headset is being used.
Normally, the screen will not turn off if there is any serial port activity (like while connected through activesync)
Click to expand...
Click to collapse
So does mine.
After installing Pocket Bluetooth Tools (PBT), my screen won't turn off while on call. If I do turn it off during a conversation, my bluetooth headset cuts out while the other person is still on the phone and won't be able to recover it until I hang up.
If I have the timer working for the PBT, then my autoshut off will work, but that's after I change the timer from 60 seconds to 10 seconds in the registry. If I disable the timer, the autoshut off will work. So if you don't want to play around with the registry, then I suggest leaving PBT timer on.
But either way, if the timer is on or off, during a call, it won't turn off automatically with PBT installed. I like PBT because I was able to quickly connect to my headset faster than the built-in MS Bluetooth Stack.
I guess its a case of balancing the use of Pocket Bluetooth tools with the power saving function of having an auto screen cut off during a call. I'm not sure what is more important to me just now.
I am reluctant to return to My Phone Profiles. I am really enjoying the latest version of PocketZenPhone. I think I will make a request to have autoscreen included in a future version. Who knows, I might get lucky!
Swiftcorp said:
I guess its a case of balancing the use of Pocket Bluetooth tools with the power saving function of having an auto screen cut off during a call. I'm not sure what is more important to me just now.
Click to expand...
Click to collapse
IF you have Pocket Bluetooth installed, then while on call, it will not automatically turned off. But if you turned it off manually, while on call, it will cut out from the bluetooth headset and I find no way to get it back yet.
I know you've seen that before, but how do i get rid of it ? It comes up, without ascing it, when i make a call, it's on the screen, when i want to turn bluetooth on, it's on the screen, and i don't want it, how do i move it ?
THX
i dont know, i've got that a couple of times before when i tried turning my BT on.. what i did was turn flight mode on then off and it fixes it. i got that message maybe 3 times and i havent got it in a while now.
Hi there
My guess is that you are using a small proggy to turn on/off the flightmode, right? Well, that program does indeed turn off the BT part, but it doesn't always turn it back on again! Try using another switcher, or use the built in flightmode functionality instead.
Do you guys also have it that when you sync via bluetooth and you switch your phone off, it comes on again after a few seconds.
Now I don't want this as this drains the battery. It should stay off and sync.
Media Player still plays when the screen is off, can't remember where you change those settings.
It's like that. Indeed, it would be nice if there is an option to turn off screen completely but still connected via activesync to save power.
You can turn off the backlight of the screen to save power.
Regards,
Arto.
Artosoft said:
It's like that. Indeed, it would be nice if there is an option to turn off screen completely but still connected via activesync to save power.
You can turn off the backlight of the screen to save power.
Click to expand...
Click to collapse
Take a look at the PHM PowerTools suite. That's a bunch of small utilities, one of them is a screen-turn off utility. Not just backlight, entire display is off but device is on the go.
Where can I download this PHM Powertools? I have searched on Google and found nothing, except a lot of links where they mention it in forums etc.
I use MortSaver to lock the screen. Free download here: http://www.sto-helit.de/modules/wmpdownloads/viewcat.php?cid=7
Is there a tool that disconnects bluetooth when i turn it off with the power button (and the device stays off) and reconnects when it is turned on again?
How about the alternative bluetooth stacks - do they have the same behaviour?
The "turn on" feature is really annoying...
I have a problem with my Touch HD in the way that everytime the screen shuts down the GPS seems to shut down. Regardless if I Push the power button or if I let it shut down by itself.
For example if I'm recording a track it will make a straight line from the point where the screen shuts down to the point where I turn it on.
I'm using Garmin Mobile XT and Kartex (a software from the Swedish lantmäteriet).
Have been using both softwares on my old E-ten Glofiish X800 and it worked fine.
/ Magnus
I think the problem is that its not the screen that turns off, but your device is going into suspend mode.
You will need an application which prevents the suspend mode and turns just the display off.
Is there a way to keep the GPS on in suspend mode?
Is there a way to change the registry so the GPS would not shut down in suspend mode? If not, what application would you recommend to use to only turn of display but not put the device in the suspend mode?
PoGa
poga said:
Is there a way to change the registry so the GPS would not shut down in suspend mode? If not, what application would you recommend to use to only turn of display but not put the device in the suspend mode?
Click to expand...
Click to collapse
Install MobileMagic from here,
http://forum.xda-developers.com/showthread.php?t=449654
On the options tab, choose GPS while power off.
I was just about to suggest the same thing. Mobile Magic allow for GPS to work while in suspended mode. There is even a feature that automatically calls upon what ever GPS app you have to start automatically when GPS signals are detected. Pretty cool not to mention a slue of other features this nifty app has.
Thanks gadgetuk437 and band27! Great app although a little bit too "robust" as I don't need the screen rotation & all other features. I guess I will only start it when I need to use GPS.
PoGa
I am in the same boat using GPS Watch which provides a track which can be outputted to Google Earth
Is there a registry hack that will allow the GPS to continue to be operated when powered off?
Thanks
Thank you gadgetuk437 and band27 for your advice but I don´t seem to get MobileMagic to work.
I have installed it and I have choosen autostart, start hidden and GPS power when power off. Have done nothing else.
MobileMagic autostarts hidden but doesn't prevent the GPS from turning off.
I have been using screenoff but that app doesn't really work either.
I raised the question at HTC as well and got the answer that this is something that is done by design in order to reduce the battery consumption.
I just don't understand why, If I didn't want to waste power I would of course close the GPS app before i turning of the screen.
Yeah, same here. After some testing I realized Mobilemagic's function doesn't really work. Even thought I also have the function to keep the GPS on selected my Garmin Mobile XT still looses the GPS fix as soon as the device goes into standby
PoGa
I'm away to do the same...
I have Garmin Mobile XT with the Snowranger map sets for tracking my snowboarding runs. I also want to leave the phone in my pocket all day and track where I've been!
I tried it a couple of weeks ago with my Diamond whilst running. I had the music player running and Garmin tracking me - and it kept my log file (which I imported to google earth) over my whole 45min run.
Hi everyone,
I'd like to know if there's a program or some type of feature in the phone that allows an Auto On/Off at a specific time. My Bold 9000 had this option and it helped greatly improve battery life as I would set the phone to turn off while I'm asleep.
Also, the alarm does not come on when the phone is off. Is this normal?
Other than these little things, I am completely happy switching from Blackberry to Android!
well the phone needs to be on standby in order for any apps to be working, so yes it is normal that the alarm isnt going off when the phone is off.