I have an idea. The screen mode on niki is set to landscape, but when the slider is opened is changes to portriat and when slider is closed it's still portrait. This idea is of making when slider is closed it turns back to landscape. What do you think about it?
It would be really helpful.
youll probably find a exe here somewhere like Vijay555 tools that can used with the special action of SLIDEACTIONS.
Related
Although I tend to use my Jasjar mostly in its native landscape mode, Some programs are still written to operate only in portrait mode. So we have to switch between to two orientations. Yes, the little icon on the bottom right of the today screen will rotate the screen - from Landscape to Portrait (PDA) mode, then from Portrait to INVERTED Landscape mode, then another click to get it back the right way up. I know it is just one more click but it tends to irritate me and I am looking for a way to just switch it to and from the two modes I want.
I can map one of the buttons to the standard <Rotate Screen> option in Settings->Buttons, but that rotates only between Portrait and INVERTED Landscape modes! It will not bring the screen back the right way up.
Maybe there is a registry modification to fix that?
Or, can someone please tell me if there is some software or other way to make the screen switching work the way one would expect on the Universal?
I know SPB Pocket Plus can do it with its <Rotate Landscape Left> option but I don't need PocketPlus for anything else so it seems wasteful to have it installed just to rotate the screen.
I expected this to be a rather common problem but searching through this Universal forum, I could not find an answer or even any discussion on this issue. Am I the only one who thnks this way?
Check out phm keys. I posted a link to it on my website today.
V
Thanks V, but I can't see any link on your Web Page. Never mind, I searched and found the PHM.lu site and downloaded the msi file from there. But I am not sure if it supports WM5? When I run the msi on the desktop it goes through the motions but nothing appears on the Jasjar. Usually it tells me something is being installed and asks whether it is to go to the SD card or main memory. But nothing happens! Tried it twice. Maybe PHM Keys is not supported on WM5?
Anyone know if it is possible to change the TyTn's annoying habit of making unwanted reversions from landscape to portrait orientation?
On my machine it:
1. Always changes to portrait when the device is switched on, even if it was in landscape when it switched off. Some idiot obviously thought this was a "feature" since it comes up in landscape initially and then switches to portrait as you watch.
2. Changes to portrait when the keyboard slide is closed even if it was in landscape before the slide was opened. This is a useful feature poorly thought through. Auto switch to landscape on open IS logical, but it should not assume you want to go back to portrait when the slide is closed again.
I'd be very happy if I could just disable both these "features", but ideally I'd be able to keep "switch to landscape on slide open", with or without "revert to previous orientation on slide close".
JohnHind said:
Anyone know if it is possible to change the TyTn's annoying habit of making unwanted reversions from landscape to portrait orientation?
On my machine it:
1. Always changes to portrait when the device is switched on, even if it was in landscape when it switched off. Some idiot obviously thought this was a "feature" since it comes up in landscape initially and then switches to portrait as you watch.
2. Changes to portrait when the keyboard slide is closed even if it was in landscape before the slide was opened. This is a useful feature poorly thought through. Auto switch to landscape on open IS logical, but it should not assume you want to go back to portrait when the slide is closed again.
I'd be very happy if I could just disable both these "features", but ideally I'd be able to keep "switch to landscape on slide open", with or without "revert to previous orientation on slide close".
Click to expand...
Click to collapse
I don't have problem #1, and I wonder if it's being caused by the orientation sensor being triggered at the wrong time. The sensor is magnetic, so if there is a magnet (any magnet) making contact the screen orientation will be landcape. Others here have noticed that even the magnetic closures on the official Tytn case from HTC will trigger the change.
Problem #2 is strictly software and yes, it's damn annoying when a UI designer assumes that the only functionality needed is the one that best fits his/her needs with no regard to anyone else. The only solution I can offer you, short of writing an app to do this yourself is to map a key to orientation switching and switch it yourself once you retract the keyboard. (A side gripe here is why the orientation settings are buried so deep that only a power user can find it).
I think I did see an app for changing orientation but will need to search.
By the way it starts (sometimes) in landscape because the mechanism that changes orientation is a magnet switch. A magnet on the keyboard is moved when you slide it open and operates the switch. Howver since there are powerful magnets in some carrying cases these can operate the switch (as if the keyboard was open) Then when you take it out of the pouch it takes a second or to and reverts to portrait.
You can operate the switch manually by running a magnet along the side of the casing. (not that I'm suggesting that as a solution )
EDIT: perhaps this will help
http://forum.xda-developers.com/showthread.php?p=1098622#post1098622
Mike
Thanks guys.
I have been able to get a rotation icon on the today screen (iLauncher) and to map rotation to a hard-key using a combination of iLauncher and Resco KeyMapper. But rotation takes a noticable time (seems to redraw at least four times, probably a poor model for the today screen plugin architecture) and it is irritating to have to do it twice when you do not want it at all.
With further experimentation I find it goes according to the slide position when switched on - if you open the slide and then turn on, it always switches to landscape, if you switch on with the slide closed it always switches to portrait. I suppose this makes sense - it reads this magnetic switch at power on and acts accordingly. But if Rob is right, maybe this is a "feature" of one of the utilities I've installed. Next time I have to do a hard reset I'll see if it still happens with the base OS.
I was really hoping there'd be a registry key I could change to modify this behaviour or that there'd be some utility I could buy that allowed me to hook any action I wanted to the slide switch (or none). For example, it would be more ergonomic if it turned on on opening the slide as well as changing to landscape.
See what you mean about the magnet - maybe if I got a strong enough one it would permanently magnetise and stick!
Is it possible to keep the 6800 in landscape mode at ALL times unless I manually press a mapped key or click a rotate icon? There are alot of times where I'm sending tons of text messages and I'm constantly opening and closing the phone and the delay for the screen to rotate around gets REALLY annoying. I'd really like it if I could just keep it in landscape mode and switch it back manually when I'm done
Thanks in advance for any advice!
start, settings, personal, sceen allows you to rotate orientation.
You're right, it does. But that setting is overridden whenever you slide the keyboard in/out. So if I were to go set my 6800 to landscape manually, then open the keyboard and close it again, it will automatically go back to portrait mode regardless of what I've set as my personal setting.
I'm looking for a way to stop my 6800 from automatically changing the screen orientation when the keyboard is slid in or out
try this it should work for you.
Thanks for that. It will suffice for the time being until I find some way to make the change fully manual. Seems I've found some people on PPC Geeks who are looking for a solution to this as well.
Hopefully someday someone will figure it out
supposedly someone is going to post something that may help!
http://forum.xda-developers.com/showthread.php?t=319834
Hi,
Just got my Topaz today.
I only manage to get it to landscape mode when turning left, is there a way of getting to go landscape when turning to the right. I prefer it that way for querty usage, being right handed I prefer to have extra reach with mi right hand.
Thanks.
I thought that it can rotat each way except for upside down. If not that will suck but sure there is a hack for it. Try turning it to the right and tilting the screen down a little bit?
If it works let me know. And by right I assume you mean that you like the bottom of the phone to be on the right side. Because I hate diveces that rotate to the left.... I've seen a few where you need to turn it left to slide out the qwerty. Seems Bass Ackwards to me.
Is it possible to rotate both ways?
Anyone found a fix for this? I'm using the new WM6.5 rom, and after enabling auto-rotate, I can only get it to rotate one way. I'd like it to rotate the other way as well as that would suit the position of my car mount and car charger better. Any ideas anyone?
not sure if it works but you can try to change with advance config 3.3 landscape mode from 270° to 180° for right rotation but its fixed
abzza said:
not sure if it works but you can try to change with advance config 3.3 landscape mode from 270° to 180° for right rotation but its fixed
Click to expand...
Click to collapse
Don't you mean "to" 90 degrees?
180 would be upside down?
yes 90 degrees
You can use ChangeScreen to rotate all the programs.
Changescreen does the trick
Thanks chaps for all the advice. Advanced config does seem to have settings to rotate in all directions, but the Touchflo interface would still only rotate in the one direction.
However, changescreen seems to override that, and allows you to rotate it in all directions (as long as you take the restrictions of the Manilla settings).
Thanks everyone!
Lee
I would like to be able to text in landscape, as fingerkeyboard is very nice in landscape mode
However I cannot get it to work.
I have made a mortscript, it just rotates my screen, regardless of settings i make.
I cannot set a key to rotate the screen as has been suggested.
Once more, Wisbar 3 will not run on my phone.
Any ideas?
not sure what to tell about landscape mode. However why do you want to use wisebar for? There should be any need for it.
Andrewwelton said:
I would like to be able to text in landscape, as fingerkeyboard is very nice in landscape mode
However I cannot get it to work.
I have made a mortscript, it just rotates my screen, regardless of settings i make.
I cannot set a key to rotate the screen as has been suggested.
Once more, Wisbar 3 will not run on my phone.
Any ideas?
Click to expand...
Click to collapse
Go to settings-> buttons and choose press/hold of camera key to rotate screen...
idk about wisbar, i dont know what would cause it to "not run"
thanks, the problem was solved
Also, i read that you could set how programs open in wisbar 3, so i could set it to auto run texting with landscape.
However its not an issue anymore since I can rotate my screen.