End Call button power off - Imagio General

If we could get the end call button to turn off the Imagio screen just like this Touch 2 in the video it would be great. This would just makes it so much quicker.
http://www.youtube.com/watch?v=1SyzSd2FiCE
Timecode 2:55

Boss428man said:
If we could get the end call button to turn off the Imagio screen just like this Touch 2 in the video it would be great. This would just makes it so much quicker.
http://www.youtube.com/watch?v=1SyzSd2FiCE
Timecode 2:55
Click to expand...
Click to collapse
If you hold in for three seconds screen will shut off even without hitting, "turn screen off." Also I can't use verizon tv so I mapped that media button to slide 2 shutdown, where you can turn the screen off, turn device off, or soft reset because its a real ***** getting that back cover off all the time.
FYI, G-trigger is very nice for screen off, not so much on because it will be going crazy on off in your pocket, but I have it installed to rotate my screen no matter what program I'm in, and I flick forward to bring up dialpad and back to close any open app and up to turn screen off. Check it out make phone very nifty.
http://forum.xda-developers.com/showthread.php?t=494267

Related

Stopping accidental clicks/presses from face when on phone?

Anyone know how to stop an accidental clicks or other screen presses from taking place when I've got the phone to my face during a call?
Si.
I use a freeware app called Screen Off, download it here:
http://www.handango.com/PlatformPro...latformId=2&N=96806&productId=125781&R=125781
Basically when I make a call or answer a call I have screen off assigned to a button, so I can then press the button to turn the screen off. To turn the screen back, just press the power on button.\
Hope this helps,
Or maybe you could simply turn PDA off with a single power button press...and when you're finished simply turn it on. Remember that the radio is always running (unless you hold the power button for 5s).
My screen turns off automatically after about 20 seconds when on a call - haven't set it to do this - in fact can't even find an option - it just seems to be the default setting. The only way to turn it back on is to press the green or red buttons, or just flick the volume control either way - works for me. (O2 XDA Mini s)
S.
Macrinus - thx that works a treat.
That's weird, your screen turning off after 20 seconds, mine turns off as configured in "Turn backlight after..." and "Turn off device...".
macrinus said:
That's weird, your screen turning off after 20 seconds, mine turns off as configured in "Turn backlight after..." and "Turn off device...".
Click to expand...
Click to collapse
Yeah, it is weird - bit annoying, but sensible really to save the power - Perhaps its just the device turning off then, with the phone still running .... comes back to life with a flick of the volume though - touching the screen won't re-activate it. Will have to time it a bit more closely !
S.
Radio on screen off
I too turn the device off when I'm on a call (although I only discovered I could without ending the call this morning). Otherwise, my ear activates the Start menu.
Doh!
if only the backlight is turned off, the screen WILL still react to face contact!
I understand that either the device (less the phone side!) via power button, or the screen must be turned off via an utility.
It may exist, but I know no proggie able to lock the touchscreen without turning it off!
(pitty, my axim X50v can lock the screen without turning it off via a Hw sliding button9

Swapped my Wizard for a Universal: power button confuses.

Hi all. My friend and I have swapped our phones. He wanted something more pocket-friendly and more like a phone, whereas I wanted something with a bigger screen to sling in my bag - so it seems like a good compromise.
However, the way the Universal handles power/standby and the backlight seems quite different and it's baffling me. I'd appreciate some help getting my head around it.
On my Wizard, after I'd got it all figured out, I would just pull it out of my pocket and press the power button on the top to instantly turn the display and backlight on and see what was on the screen. Then I'd press the button again to turn the display and backlight off and put it back in my pocket. While in my pocket like this, all buttons except the power button were locked, yet it would still receive calls and get my e-mails and texts: ideal. If I wanted to shut the whole thing down I would *hold* the power button and it would shut down completely.
Now I've got the Universal. Pressing the power button seems to have the same effect, but holding it now turns the backlight off. Here are my questions:
1) Why would you want to do that?
2) Why is there a separate backlight button too, if holding the power button toggles the backlight?
3) How can I turn the device fully off (apart from removing the battery temporarily)?
4) How do you generally use *your* Universal? Do you just close the screen and toss it in a bag/pocket? Or do you leave it in tablet mode and press the power button?
Thanks for any thoughts!
- Si
Re: Swapped my Wizard for a Universal: power button confuses
Wow, your friend sure got ripped off. I came from a Wizard myself, the Universal is a much more refined machine. I will try to answer your questions to the best of my knowledge.
1) Why would you want to do that?
I have no clue, I wonder why there are so many backlight options.
2) Why is there a separate backlight button too, if holding the power button toggles the backlight?
Same answer as above :lol:
3) How can I turn the device fully off (apart from removing the battery temporarily)?
I've never had to fully turn it off, even in the factory manual they don't tell you. They give you a run around answer I'll quote here,
"Power button: Press and hold to turn the screen backlight on and off (you can also do this using the screen backlight button see page #9 & #17) When you close the lid the screen goes off; if you leave the lid open, the backlight will time out and then the screen will switch off. A single press of the power button will turn the screen on or off. The phone is turned on at startup, after the SIM pin is entered. If the screen goes off, the phone will still remain connected."
4) How do you generally use *your* Universal? Do you just close the screen and toss it in a bag/pocket? Or do you leave it in tablet mode and press the power button?
Becareful closing it and tossing it in your bag, the screen likes to make contact with the keyboard leaving marks on the keys and screen ( ) People usually put a small screen wipe rag in between the screen and keyboard before closing or get a silicone case. I have the silicone case, when I'm out it's in my hands since I'm not a belt clip person or in my pants pocket when it fits :wink: The only time it's in tablet mode is when I'm surfing the net or playing a game; I don't like to leave it in tablet mode as it exposes the screen to accidents.
My friend is pretty happy with the Wizard - it suits his needs better and it is amazing what a difference the 'compactness' makes if you use it mainly as a phone rather than a PDA.
Okay, so it seems you can't turn the Universal off. I always plug my phone in to charge at night, so I'm not worried about that.
I was really impressed with the ruggedness of the Wizard. The screen never got any scratches on it. I wish they made iPods out of the same material!
When you use the Universal as a phone, do you tend to use it closed? I feel sort of silly holding a chopping-board sized slab up to my ear. Maybe I'll get a Bluetooth headset
Izzard-UK said:
When you use the Universal as a phone, do you tend to use it closed? I feel sort of silly holding a chopping-board sized slab up to my ear. Maybe I'll get a Bluetooth headset
Click to expand...
Click to collapse
To be honest, I've only used the Universal's earpiece once or twice. It's too big to hold up to your ear for talking. When sitting at your desk, or when you're playing with it, people are always giving you the "Wow!" look but when you have it up against your ear as a cell phone they laugh...and laugh :lol:
I always use a bluetooth earpiece/headset. I have either my Bluespoon AX2 or Motorola HT820 with me at all times. Bluetooth is a must! I rarely use the Wizard's earpiece either, always bluetooth on the Wizard as well.

Is Wake on Home Button Push Possible?

Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button? Or do I really have to push power button every time?
I know of volume button tweak, but.. that one is no good (volume settings gets displayed)... Any other ideas, suggestions? (other than "pull the stylus")
Thanks!
Try AE Button Plus. You can customize a lot of buttons. I didn't tried what you asked, but it worth a try.
Anyway, take care using it.
I would say not. There appears to be no power to these lower buttons while in standby, so no software could work?
Kev
cokester said:
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button?!
Click to expand...
Click to collapse
No, for the reasons given.
BUT... you could use MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again.
You do need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
I have it set to turn screen off on reverse portrait too,
so it turns off automatically when I put it in my pocket.
Im also afraid for that power button... used it a lot on my diamond so it got bricked, its so gentle... Im using it as much as little possible now on mine HD for that reason.
I have s2u2 unlock on stylus out, so I pull out the stylus, the HD comes on and unlocks. It's so simple.
gadgetuk437 said:
No, for the reasons given.
BUT... you could use MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again.
You do need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
I have it set to turn screen off on reverse portrait too,
so it turns off automatically when I put it in my pocket.
Click to expand...
Click to collapse
gadgetuk437
Do you find this has any impact on battery life? If i'm right, this just turns off the screen but does not put the device to sleep?
cokester said:
Hey, did anyone found solution... is it possible to tweak settings somehow so that display turns on by pushing home button? Or do I really have to push power button every time?
I know of volume button tweak, but.. that one is no good (volume settings gets displayed)... Any other ideas, suggestions? (other than "pull the stylus")
Thanks!
Click to expand...
Click to collapse
That's not possible for the simple reason that the buttons below the screen are part and parcel of the touch screen, so if the screen is off, they won't work.
gadgetwizard said:
Do you find this has any impact on battery life? If i'm right, this just turns off the screen but does not put the device to sleep?
Click to expand...
Click to collapse
That is correct.
Power consumption, in this case, depends on what applications are left running. GPS, streaming video, etc would be a bad idea to leave running. But more workday apps use very little juice when the huge power drain of the screen is turned off.
MackTK said:
Try AE Button Plus. You can customize a lot of buttons. I didn't tried what you asked, but it worth a try.
Anyway, take care using it.
Click to expand...
Click to collapse
Nope... I've tried that app. Its great for locking down the normal WM hardware buttons, but it doesn't have the HTC bespoke "Home button" on the list of configurable buttons.

Could be a numpty questions...power on by pressing screen?

I have recently taken delivery of an Otterbox for use on my bike (GPSComputerCycle and music) but to save power I would like to be able to turn the screen off during the ride (xpshutdown allows me to do this) and then press the screen if I want to turn the HD back on again.
I use S2U2 if this makes an difference.
Is there a setting somewhere which allows me to press the screen to power the THD back on again (even if it goes to a lock-screen)?
I had a quick look through the settings (Screen/Power/Lock) but couldn't find anything.
Anyone help?
Thanks
Not possible AFAIK.
When the screen powers down, that applies to the touch-sensitive mechanism as well as the display element.
It would probably require something deeper than even a registry hack, the drivers would need re-writing or something.
Its not possible for the simple reason that the buttons below the screen are part and parcel of the touch screen, so if the screen is off, they won't work.
There appears to be no power to these lower buttons while in standby, so no software could work either?
However there is other ways of doing this:
1. Use s2u2 unlock on stylus out, so when you pull out the stylus, the HD comes on and unlocks. It's simple.
2. MobileMagic to toggle the screen on/off when device is turned face down. That way when you turn it face down, screen goes off and buttons are locked. To turn it back on, turn devicedevice face down again. You will need need to go to Start-Settings-System-Power-Advanced and untick the option, "Turn off device if not used for", because if the device gets turned off (instead of just screen off) it won't respond.
Hope this helps
Unfortunately the HD will be inside an Otterbox mounted on the handlebars of my bike, so removing the stylus would not be an option and neither would using the G-Sensor.
Sounds like I will have to have it powered on all the time. I know that GPSCycleComputer dims the display while it is active, so this might be a part solution.
Thanks for all the answers though. I was being a numpty after all!
Regards
GLOC said:
Unfortunately the HD will be inside an Otterbox mounted on the handlebars of my bike, so removing the stylus would not be an option and neither would using the G-Sensor.
Sounds like I will have to have it powered on all the time. I know that GPSCycleComputer dims the display while it is active, so this might be a part solution.
Thanks for all the answers though. I was being a numpty after all!
Regards
Click to expand...
Click to collapse
Alternative solution:
Attach a dynamo to the wheels of your bicycle and charge your HD on the go
I wouldn't be able to even begin telling you how to do this though!

simply screen off?

Is that possible just to screen off HD?
Briefly press the power button of HD will cause the device be in sleep mode.
I would like to get screen off with application run backgroundly. Thank you.
henrik.dk said:
Is that possible just to screen off HD?
Briefly press the power button of HD will cause the device be in sleep mode.
I would like to get screen off with application run backgroundly. Thank you.
Click to expand...
Click to collapse
Have you tried XDAShutdown by DaveShaw. Nice little app with plenty of skins which allows you to Reset, Shutdown & sleep
henrik.dk said:
I would like to get screen off with application run backgroundly.
Click to expand...
Click to collapse
As far as I'm aware, apps still continue to run when you power down the screen by pressing the power button.
What makes you think this is not the case?
I have the same problem. I noticed the problem while listening to Resco Radio. When I turn off the screen the music stops and when I turn the screen back on the music immediately starts playing again.
I'm running Mikenificent 3.0, WM6.5.1.
johncmolyneux said:
As far as I'm aware, apps still continue to run when you power down the screen by pressing the power button.
What makes you think this is not the case?
Click to expand...
Click to collapse
Unfortunately that's not quite correct. If you play music in the music tab without headphones and press the power button, the music will stop. However, if you just blank the screen, the music will continue. Same can be said about rescoRadio and WunderRadio as well as other apps.
There are several ways to combat this and I can list two of the top of my head:
1) Gyrator - rotation software which has a setting to 'turn screen off.' This way you can flip your phone upside down and it will blank the screen but not suspend the device.
2) S2U2 - locking software which has a setting to 'but only blank screen' which will turn the screen off instead of suspending the device.
Hope this helps
henrik.dk said:
Is that possible just to screen off HD?
Briefly press the power button of HD will cause the device be in sleep mode.
I would like to get screen off with application run backgroundly. Thank you.
Click to expand...
Click to collapse
Hi Mate,
Here is the link for the program you've asked for. Specifically designed for Touch HD.
It turns off screen and locks the buttons, It doesn't put the phone in sleep mode like the way it does when you press the power button. This utility just simply turn off the screen and locks the button on the phone but doesn't go to sleep mode, so when you receive text message the screen would turn back on.
here is the link
http://forum.xda-developers.com/showthread.php?t=569473
Please do not forget to vote if you're happy with the program and if it does what it needs to.
Enjoy!!!

Categories

Resources