Related
Warning: Although this ROM Code and ROM Kitchen has been tested on my IPAQ 614c (FA992AT#ABB). Don’t Flash unless you know what you are doing! This ROM Kitchen is for Personal use only. ROM Code and ROMs Created with this Kitchen should not be released on the forum.
First, Thanks a lot for help from Oldcat, Star, T2 Wuqiyu007 and Saxxon.
1. The ROM Code was dumped from the IPAQ 614c;
2. The language is English;
3. No any change has been done, so you can think the ROM is official;
4. You can flash the rom by SD_Loder mothed (describe following);
Flashing instruction:
1. The name of ROM code is flash.dio
2. Copy the flash.dio to your nomal Micro SD (Micro SDHC does not work), and put the file in root directory.
3. Power off.
4. Press and hold the Mute+Record heys same time, and then press and release the power key.
5. The SDLoder screen will display.
6. Don’t tuch the phone.
7. When the flashing finish, the phone will restart, doing clean boot. And the MS welcome screen will come.
You can download the ROM Code here, http://www.fs2you.com/files/9886b957-1d78-11dd-a1e1-0014221f4662/
You can download the ROM Kitchen here,http://www.fs2you.com/files/f7bf6b00-1d90-11dd-863a-0014221b798a/
great work!
now it is only a matter of time until the german rom will be released isn't it ?
james
Does this mean anything for us 6900 series owners? Could this be ported over to the Sable devices?
I don't think it does, and why I keep seeing threads concerning this device in forum topic is baffling to me, as it is a completely different model of phone! the 614c was created AFTER the sable, for goodness sakes it already had WM6 on it
I'm not exactly sure how to cook roms or even how it is done but I am thinking there may be something we could use from this rom. I wish there was someone around that had much more knowledge about this stuff. Where could I go to learn about this? Is there a different way to cook roms depending on the model of phone or is it basicially the same idea for all phones? I used to screw around with my old motorola phones alot and would definitely be interested in learning about this just to get a mobile 6 rom out for this phone.
As I know it will be worked on 6900 series,but it's up to the developers choice....See,O2 Xda Exec it never ever have the offical WM6 ROM and up,but now the WM6.1 ROM be released so much by the developers,yeah,that's great job..
So we will see & god bless!
Brose
bramblyrose said:
As I know it will be worked on 6900 series,but it's up to the developers choice....See,O2 Xda Exec it never ever have the offical WM6 ROM and up,but now the WM6.1 ROM be released so much by the developers,yeah,that's great job..
So we will see & god bless!
Brose
Click to expand...
Click to collapse
So have you put this ROM on your 6915? I don't want to do anything until I know I won't brick my phone.
danish rom
can you make a ROM with danish language on....
Is possibly to make WiM 6.1 ROM for 614c?please..please
excellent !!!
now we can start somewhere
Hi cnbenson, can you upload somewhere else, links are not working anymore.
Hi!
I want this too but the link to the rom doesn not work...
saxxon said:
Hi cnbenson, can you upload somewhere else, links are not working anymore.
Click to expand...
Click to collapse
Yes please upload somewhere, link to download the ROM code is gone. Furthermore, this site needs to install program in order to download, please upload somewhere like zshare, but hopefully not RS.
Thanks to u.
I'd be interested to give this a try too. Like Saxxon, I have a pre-release version and somewhere along the line an attempt to update it has left me with a device that pretty much works but it does not sync or charge. I'm sure it's a firmware issue but none of the ROM updates I've tried have helped so far. Anyone with any pointers as to which of the rom components are likely to be the cause?
FYI, my 600 has the following component versions:
Version
Product Revision Level : DVT
ROM Date : Jan292008
ROM Revision : MP-1.00.01
Extended ROM Version :
OS Version : 6
Bootloader Version : MP-1.00.01
XIP Version : 1.0.0.0
Camera
Module Present : Yes
Hardware Revision : 0
Hardware Driver Version : 0.0.3.0
Software Driver Version : D1.48.0
Software Version : 2.0.0.29
Camera API Interface Version : 0.0.0.1
Camera Information : 3M AF
Bluetooth
Radio Present : Yes
Firmware Version : A05U
Hardware Revision : BlueCore4ROM
Driver Version : BCHS_WINCE_MOBILE_4_7_3
Software Version : BCHS_WINCE_MOBILE_4_7_3
WLAN
Radio Present : Yes
Firmware Version : 9.70.3.18
Hardware Revision : 88W8686
Driver Version : 38.p28
Software Version : 38.p28
GSM
Radio Present : Yes
Radio Firmware Version : M:MP-0077-140108
GPS
GPS Present : Yes
Status : GPS is Disabled
Manufacturer : Qualcomm 6280
Revision Level : 0.0.0.0
Driver Version : 1.0.0.0
Firmware Version : 4.0.70
Software Version : 1.0.0.0
Forgot to add that at boot time, I get:
OS-v1.00.01
FW-v0.77
its the radio/QC firmware,
if you have the latest bootloader (which it looks to be the case) you can update the QC fw with the book key combination : lower left key on the side and lower right key on the side ... then turn on ... it will say "sd loader modem"
. then it look on the sd card for the new QC firmware file. actually i have not tried it. but if you get the official amss.mbn file from somewhere you would be able to upgrade.
let me know if it works for you.
saxxon
Thanks for the speedy response.
So I need an appropriate amss.mbn file to drop onto the SD then?
Is there a way of extracting this from another device or is there another source I could look at?
Hi n1gel,
do you have this ROM available? I would love to have it, it's the original ROM for 612c right?
Unlike HTC/O2 or any other manufacturer, they made available of all ROMs from their website. Does HP has the same? Would like to download the original ROM for back up.
Would appreciate if you could help upload and we could share it. Thank you so much.
Any idea how long the AMSS.mbn file should take to flash?
I've tracked one down and placed it on the SD and (with a fully charged battery!) gone into SDLoader mode. It's detected AMSS.mbn and started 'Writing' but I don't know how long it should take or what 'success' might look like!
Any clues?
n1gel said:
Any idea how long the AMSS.mbn file should take to flash?
I've tracked one down and placed it on the SD and (with a fully charged battery!) gone into SDLoader mode. It's detected AMSS.mbn and started 'Writing' but I don't know how long it should take or what 'success' might look like!
Any clues?
Click to expand...
Click to collapse
where did you get the AMSS.mbn file from ? its the rom for the qualcomm chipset. which version is it ? thanks !!!
Hi,
Nice title isn't it ?
In fact I'm searching (hard) for a release install of the Touch3D interface for the HTC Cruise.
I have read and read and read many threads talking about the 3D drivers, the manilla 2D, hard-spl and so on... Didn't understood...
It was pages of post from developpers to developpers.
So I didn't even found a procedure telling how to install Touch3D on the cruise. A procedure for dummies I mean, i.e. step 1, step 2, step 3, etc...
I have seen on youtube videos showing the Touch3D on a Cruise... so it may be possible ! But how ???
Would it be possile to have a thread for "release" versions, containing info on the last stable and operationnal version, and a thread for "dev" versions, where geek and developpers explore, try, search, install, uninstall version ?
At the moment, I have installed Windows Mobile 6.1 on my Cruise : great success (there were only on exe to run !).
I'm really intersted by the touch 3D interface which hides WM6 more (because WM6 is not for mobile phones : I don't know who do it by Microsoft, but he should has never used it ! He might use an iphone !!!!)
And last, a request for a french version...
Thanks for your returns,
Arth'
http://forum.xda-developers.com/showthread.php?t=430718
Arthurrr said:
Hi,
Nice title isn't it ?
In fact I'm searching (hard) for a release install of the Touch3D interface for the HTC Cruise.
I have read and read and read many threads talking about the 3D drivers, the manilla 2D, hard-spl and so on... Didn't understood...
It was pages of post from developpers to developpers.
So I didn't even found a procedure telling how to install Touch3D on the cruise. A procedure for dummies I mean, i.e. step 1, step 2, step 3, etc...
I have seen on youtube videos showing the Touch3D on a Cruise... so it may be possible ! But how ???
Would it be possile to have a thread for "release" versions, containing info on the last stable and operationnal version, and a thread for "dev" versions, where geek and developpers explore, try, search, install, uninstall version ?
At the moment, I have installed Windows Mobile 6.1 on my Cruise : great success (there were only on exe to run !).
I'm really intersted by the touch 3D interface which hides WM6 more (because WM6 is not for mobile phones : I don't know who do it by Microsoft, but he should has never used it ! He might use an iphone !!!!)
And last, a request for a french version...
Thanks for your returns,
Arth'
Click to expand...
Click to collapse
it's been out for a while u can't have searched that hard lol
no mms
no onenote
no works automapa 5.1
I have seen this thread... but it doesn't let me thinking it was touch3D.
I tried to install it : nothing changed on the pda, except it was slower...
So it reinstall WM6.1...
Did you install new drivers 3D ???
Otherwise it doesn't work, mine is ok, one of the videos you saw is mine.
I have downloaded the m-Amine 2.0 RTM SP3.
Run the RUU.... and the process starts, the RVB screen appears on the Cruise.
0% : it stays at 0%...
I don't know why.
The WM6.1 RUU works fine. But the RTM stays as 0% although the process seems to be similar to the WM6.1 RUU.
I 'm searching (hard : in those billions posts without any stard nor end !) to solve it
I will keep you informed.
Install HardSPL before.
Man use search function and read sticky topics.
So...
It works now
Here are the steps.
First of all, I started from a Touch Cruise updated with the HTC offical Windows Mobile 6.1 upgrade, download from the HTC site.
From here :
Step 1 : installation of the hard-spl boot loader found here
http://forum.xda-developers.com/attachment.php?attachmentid=69875&d=1202629374 or via this thread : http://forum.xda-developers.com/showthread.php?t=351964
Step 2 : installation of the M-amine ROM
downloaded from here (for the French version) http://rapidshare.com/files/151443296/M-Amine_2.0_RTM_FRE.zip or via the thread http://forum.xda-developers.com/showthread.php?t=430745
And now, it is nice
BUT :
no more Tom tom....
and maybe other things (I haven't checked all yet)
Hope this will be clear
Arth'
Arthurrr said:
So...
It works now
Here are the steps.
First of all, I started from a Touch Cruise updated with the HTC offical Windows Mobile 6.1 upgrade, download from the HTC site.
From here :
Step 1 : installation of the hard-spl boot loader found here
http://forum.xda-developers.com/attachment.php?attachmentid=69875&d=1202629374 or via this thread : http://forum.xda-developers.com/showthread.php?t=351964
Step 2 : installation of the M-amine ROM
downloaded from here (for the French version) http://rapidshare.com/files/151443296/M-Amine_2.0_RTM_FRE.zip or via the thread http://forum.xda-developers.com/showthread.php?t=430745
And now, it is nice
BUT :
no more Tom tom....
and maybe other things (I haven't checked all yet)
Hope this will be clear
Arth'
Click to expand...
Click to collapse
Arthurr,
Step 1 keeps failing, When I enter BootLoader.exe, I get the message SPLJump has stopped working. Got to Love Vista ... Cannot get this to work. Any Advice here? I tried 3 different versions and no luck. Any advice ...
Thx
Bernd
Arthurrr said:
So...
It works now
Here are the steps.
First of all, I started from a Touch Cruise updated with the HTC offical Windows Mobile 6.1 upgrade, download from the HTC site.
From here :
Step 1 : installation of the hard-spl boot loader found here
http://forum.xda-developers.com/attachment.php?attachmentid=69875&d=1202629374 or via this thread : http://forum.xda-developers.com/showthread.php?t=351964
Step 2 : installation of the M-amine ROM
downloaded from here (for the French version) http://rapidshare.com/files/151443296/M-Amine_2.0_RTM_FRE.zip or via the thread http://forum.xda-developers.com/showthread.php?t=430745
And now, it is nice
BUT :
no more Tom tom....
and maybe other things (I haven't checked all yet)
Hope this will be clear
Arth'
Click to expand...
Click to collapse
Be careful!!
M-Amine 2.0 is a ROM which includes Manila2D, similar to touchflo 3d with the difference that is, of course, in 2d!! So it's not touchflo3d, anyways it seems like the development of TF3D for polaris stopped
TouchFlo 3D working
Hello,
I got this to work, and I truly love it. Now the question is, how do I get my TomTom back. I am sure one of of you has found a way to extract TomTom from the original HTC Touch Cruise and made us able to put it back onto the HTC Touch Cruise with the reall cool Touch 3G interface. Anybody know how to do that? Please give me some step by step instructions as to how I will get this done.
Thanks in advance
Bernd
Got it to work, I love it ... Thanks Arthur for giving me the steps here ...
Arthurrr said:
So...
It works now
Here are the steps.
First of all, I started from a Touch Cruise updated with the HTC offical Windows Mobile 6.1 upgrade, download from the HTC site.
From here :
Step 1 : installation of the hard-spl boot loader found here
http://forum.xda-developers.com/attachment.php?attachmentid=69875&d=1202629374 or via this thread : http://forum.xda-developers.com/showthread.php?t=351964
Step 2 : installation of the M-amine ROM
downloaded from here (for the French version) http://rapidshare.com/files/151443296/M-Amine_2.0_RTM_FRE.zip or via the thread http://forum.xda-developers.com/showthread.php?t=430745
And now, it is nice
BUT :
no more Tom tom....
and maybe other things (I haven't checked all yet)
Hope this will be clear
Arth'
Click to expand...
Click to collapse
Arthur,
I was sad about TomTom as well, here it is ... Works like a charm. Have fun!
http://forum.xda-developers.com/showthread.php?t=439663
does anyone have news on development? Any insight on whether there will be a ROM to include it? so far the only current development I found was here
http://forum.xda-developers.com/showthread.php?t=450556
yes, this is the latest activity I know as well. But I think devs will pick this up again, there are so many people who want it stable on their devices...(though, IMHO I can´t understand it *lol*)
i will start by saying i didn’t have the call waiting problem
but I did upgrade to 0.89 radio (test, have a look/see) and when doing so checked the hp callwaiting fix
4 me i found radio 0.89 not as good as the fw0.88 (bad on battery,wifi on/off time,gps, working with igo8.. )
anyway before returning to 0.88 I have modified the callwaiting fix to work on the 0.88 radio
I confirmed it was working on 2 devices of a friends that did had that problem
the only issue is that there is a mute on the first ring then every thing is o.k.
Please see if it will work/helps you
install to main memory then SR your device
enjoy
http://www.sendspace.com/file/nff8jh
It's installed...
I'll give my feedback later after testing...
Thanks
SwimmerBoy said:
It's installed...
I'll give my feedback later after testing...
Click to expand...
Click to collapse
the 600 has different ID num (location of purchase...) and I wanted 2 know if it works on all 600 series (like hp SIM patch that fit only specified models)
after testing, please specify your device ID
Thanks 4 the feedback
EREZYAD said:
the 600 has different ID num (location of purchase...) and I wanted 2 know if it works on all 600 series (like hp SIM patch that fit only specified models)
after testing, please specify your device ID
Thanks 4 the feedback
Click to expand...
Click to collapse
Hi,
I did extract the cab from the HP local pach for SIM problems.
would you know how to make it "universal" for 600 series ?
I suppose I should extract a DLL inside the cab, modifie it then recompil the cab but it is above what I am able to do.
Edit : in case you could do something, here is the cab :
albertorrent said:
Hi,
I did extract the cab from the HP local pach for SIM problems.
would you know how to make it "universal" for 600 series ?
I suppose I should extract a DLL inside the cab, modifie it then recompil the cab but it is above what I am able to do.
Edit : in case you could do something, here is the cab :
Click to expand...
Click to collapse
what happens when you install this cab?
the installation fails?
you get warning not? If so what is it?...
When I install this cab I have this error message :
ERROR : INVALID MODEL ID
This Udate cannot be used for your IPAQ Pocket PC. Please check your Update utility.
Click to expand...
Click to collapse
this cab comes frome here :
http://h20000.www2.hp.com/bizsuppor...EnvOID=4014&swLang=17&taskId=135&mode=4&idx=0
The supported SKU IDS are: FA992AA#ABF, FA992AT#ABF, FA991AA#AB0, and FA991AA#AB5.
Mine is FA992AT#ABB
ABB is my contry ID, I gess ABF is for France.
If I could change my country ID by editing the registry, it could be the simplest way but I did a search with the word "ABB" in my registry editor and found nothing.
check your inbox nd pm me if it works....
backup befor you try it!!!!
good luck
thanks a lot.
installation is ok now
It will take some time to see if it works for me or if it is harmful.
I'll keep you informed
happy to hear the installation was o.k but I will be happier if it will also work 4 you
don’t 4get some limitations are not just 4 the div "fun"
Good luck
For me it didn't work. It was installed fine, rebooted, but the problem is still there (the conversation is muted all the time when the second person rings).
So I disabled the call waiting feature and there is no problem at all now.
The second person who wants to talk with me will get a "number is busy" message and will have to call back later.
That's the best solution for me.
nickey1982 said:
For me it didn't work. It was installed fine, rebooted, but the problem is still there (the conversation is muted all the time when the second person rings).
So I disabled the call waiting feature and there is no problem at all now.
The second person who wants to talk with me will get a "number is busy" message and will have to call back later.
That's the best solution for me.
Click to expand...
Click to collapse
sorry 4 not answering sooner ....
did you install to device memory ?
do you have wm6 or 6.1? (4 now i know it works on hp wm6 only )
if you use hp wm6 ... then what is your product id?
tnx 4 testing and info ..
i will look into the fix and see if i can fit it to all devices
btw the call waiting fix is the one in the first post!
I have installed the call waitting fix from your first post. When the install wizard asked me I chosed main memory (not Ipaq files or storage card). Then I restarted the device.
O.S. is WM 6.1 build 20270 1.3.1
Product ID: FA992AA#ABB
nickey1982 said:
O.S. is WM 6.1 build 20270 1.3.1
Click to expand...
Click to collapse
i think this is the problem ,i didn't try to fit it to the 6.1 (havent installed it...) only the hp orig rom
sorry
EREZYAD said:
happy to hear the installation was o.k but I will be happier if it will also work 4 you
don’t 4get some limitations are not just 4 the div "fun"
Good luck
Click to expand...
Click to collapse
after a week, I can tell that this fixe is not harmfull for non designed country ID products.
I havn't had any unwanted softresets in a week so I can tell that this fix is working for MY problem.
I am not a heavy user of connection tools like wifi, bluetooth, GPRS, 3G and so one so I cannot tell if this fix is harmfull to connection tools.
the only thing I know is I can phone as normal, and I tried to connect to wifi and download weather data and it works.
As It is not harmfull for me I think I can give it for public download on this site.
It worked for me but it doesnt mean it may work for you so please backup your data before to try it.
Thanks again to EREZYAD for making it possible !!
I will repost my original post on modaco here too, if someone can make a clean rom with maybe some fix that are listed below it would be great
Hello,
I just have brought this pda yesterday. It's very pretty and nice hw too. I've tried already to disable all the samsung stuff's but i can't remove sms manager and others things.. (i've already read the guide of editing registry ecc.ecc.).
Isn't around a clean rom to flash it? Can I flash with a generic b7610 rom or it will not work?
The firmware versions of mine are :
PDA : B7620XXII7
CSC : B7620ITVII7
TELEF. : B7620XXII6
I've found here a rom but too scared to try without a changelog and support (h--p://chomikuj.pl/misiio61/Firmware+Samsung/Firmware/GT-B7620+Armani)
If anyone can help it will be really appreciate coz the ppc is good but full of junkies.
thx
bye smile.gif
WISHLIST :
To do
- Clean 6.5.X Rom without Armani things (Pleaseee someeeeoneee heelpppp ussss or a brave man who would flash with b7610 rom)
- Total way to eradicate or at least disable Armani Apps
- A way to keep settings after a softreset or just power off\on :
- camera app lose options like wdr,antimotion ecc.
- device lose cpu settings like auto\high\low use
- softkeyboard will return to samsung default (i'd like to use "FingerKeyB" for example)
- Software to enable the frontcamera? (it seem to be one afterall)
- Way to remove "Sent Message Notification" (tried with all software but do not work, neither from registry, must be armaniapps...)
Done
- GPS Fix (as in tomtom) with "GpsMod"
- Shuttersound Off (just use the cab in the b7610 tweaks guide)
*FIXED (a bit= not all keys are usable sad.gif ) (use AEBPlus.v.2.6.6.2) - Something to remapp all hardware buttons (i think someone mentioned a software somewhere...)
*FIXED (a bit=works but no configuration working to calibrate it well) using this : h**p://rapidshare.com/files/312689104/HTCSensorSDK.dll (some games works now) - Working HTC gmotion driver\dll (tried from omniaPro\II no worked sad.gif )
Click to expand...
Click to collapse
Dump your rom
Ninja_Gundam said:
I will repost my original post on modaco here too, if someone can make a clean rom with maybe some fix that are listed below it would be great
Click to expand...
Click to collapse
Did you have WM6.1 or WM6.5??
On B7610 the WM6.1 is faster, more stable and don't have the collors displaing bug (http://www.modaco.com/content/forum/300931/). I would sugest that you keep with WM6.1..
Could you dump your rom here??
I would like to try this rom on my b7610.
Please follow these topic: http://www.modaco.com/content/b7610...-com/297139/a-simple-procedure-to-dump-a-rom/
Tx =)
Hello
Hmm i have 6.5 already, it came with it and i just tried with a new official rom (always 6.5 but newer).. and yes i have that bug of colors
Btw no need to dump, if u want to try it, the roms files are there : h**p://chomikuj.pl/misiio61/Firmware+Samsung/Firmware/GT-B7620+Armani
or here thx to stn : h**p://www.megaupload.com/?f=Q5T5AXNU
Can't really anyone do a cleanup of the rom?
Chooo
B7620 Armani WM 6.53 (official)
is there any word about an update for WM 6.53 since the now installed 6.52 is buggy and kinda slow....samsung has a very lazy support
Still no
I think we have 2 option, or a custom rom of the 6.5.2 or a 6.1 rom. After all 6.5 isnt that great thing, ok more usable with touch but i can live without it. Plus wm6,1 have 2000 themes, this titanium is cool idea but no themes and the generator online is just a joke
Somebdoy help ussssssssssssssssssssssssss! ^_______^
Damn.. i dont want to change device, but.. support on b7620 really sucks! If only hd2 had a hardware keyboard :\
Chooo
I would love to have a clean Rom, too! My B7620 works fine, but after a Soft Reset I have only about 45 MB RAM free...
Hi [email protected] and others,
on my original post on moda.. a guy offers his skills to mod a rom but he need a dump (h**p://www.modaco.com/content-page/298479/req-help-with-gt-b7620-aka-giorgio-armani/page/20/)of the B7620, can someone here do that?
Chooo
ps : We need to merge forces
Flash B7610 rom onto b7620
is it possible to flash samsung B7610 rom onto B7620? and if so which of the roms work properly.
Flashing B7620
Don't flash B7610 rom to B7620...i tried...it doesn't work...the phone becomes all weird.
I think someone just posted a B7620 clean rom over at Modaco, if anyone of you wants to try and give feedback:
http://www.modaco.com/content-page/298479/req-help-with-gt-b7620-aka-giorgio-armani/page/40/
Yep, it is dask.. helping me trying to create a perfect slim rom and later we will see
Chooo
So has anyone come up with a light, clean ROM for the B7620?
P
Problem with my GTI8000
Hi
i dont know if this is the rite section to place my question.
i have a bit of a problem with my samsung Gt i8000
i have this phone for a year now and it came with wm6.1 build 5.2.21006.1.2.74
and if i try to update with KIES the samsung software for my phone it say there is a firmware update but when i try to update it say your version:
pda:IH3 / Phone:JD1 / CSC:027
and then there is no firmware update for you available ??
this is the first time i try to update my firmware and its also the first time i used the program KIES new version of samsung software to controle and arange stuff on your phone.
sorry for the bad gramma and language because its not my native language.
Best regard's ron
ROM request threads in DEVELOPMENT are NOT DONE in my honest opinion. Also, please don't revive request threads like this.
Closed.
First of all, Make sure that this one is not from SamFirmware and SFUnlock.
I don't know who they are.
Samsung has 3 kinds of firmware version.
WP_PRODUCT : for Retail Device
WP_ENGINEER : for Engineer
WP_HYBRID : Unknown
I think that WP_HYBRID mode is for multiple operating mode which includes PRODUCT and ENGINEER.
HYBRID can be flash both of PRODUCT and ENGINEER version.
So I patched flasher to operate in HYBRID mode.
IF U USE THIS ONE, YOU CAN FLASH ALL OF ENGINEERING_SAMPLE ROM ON YOUR PHONE.
HOW TO:
How to flash is simple.
Just select ROM files and start. That's it.
BUT BEFORE DO THAT,
PROCEED AT YOUR OWN RISK.
I'M NOT RESPONSIBLE ANY PROBLEM ON YOUR CELL PHONE.
SCREENSHOT:
http://imageshack.us/photo/my-images/855/65309694.png
http://imageshack.us/photo/my-images/718/sdc12331.jpg
FILES:
http://www.mediafire.com/?eu2sw1k2wv2et9t
INFO OF I8700XXKH2:
Firm revision : 2424.11.8.2
Hard revision : 3.15.0.4
Radio software : 2424.11.7.2
Radio Hardware : 0.0.0.800
Bootloader : 5.8.0.8
Chip SOC : 0.36.2.0
ENHANCED OF I8700XXKH2:
- COMPASS SUPPORT
- Camera Touch-focus now support
- Bing vision work correctly
- Motion Sensor support
- Radio Software updated
- Hidden WIFI network support
- Bing Music faster and more accurate
PLZ let me us improvements of this ROM.
KNOWN PROBLEMS OF I8700XXKH2:
AT&T 3G Connection DOES NOT WORK ON I8700XXKH2.
> YOU NEED TO INSTALL "Network Profile" Application which is provided by SAMSUNG on Marketplace. That would be work fine.
THIS ROM DOES NOT INCLUDE INTERNATIONAL LANGUAGES.
> It only has "Deutsch, English(Kingdom), English(US), Espanol, Francais, Italiano. Plz consider about this before flash on your phone.
PLEASE REPLY, Improvements and problems of this ROM.
works perfectly ! Thank Thank Thank guy !
I will try, thanks!!!
[Quore]
INFO OF I8700XXKH2:
Firm revision : 2424.11.8.2
Hard revision : 3.15.0.4
Radio software : 2424.11.7.2
Radio Hardware : 0.0.0.800
Bootloader : 5.8.0.8
Chip SOC : 0.36.2.0
[/QUOTE]
Hi, I have a question: When I'll update to Mango Final Will these values be the same?
Many thanx, worked fine
Sent from my OMNIA7 using XDA Windows Phone 7 App
It's working. Man you are awsome!!!!!!!!!!
One littel question its a t-mobile branded xxkh2 rom.
Can i use another csc to undbranded handset?
I flash... successfuly
But this is Telekom deuchland rom, and half thing dont work with out their sim card. I have t-mobile.hr...
U can use another CSC maybe.
CSC is not important part in rom.
If u got a problem, u just would be able to rewrite new rom.
New stuff
copied from mobiletechworld:
1) Updated camera driver: Touch-focus now works (instead of simply touch-to-capture), Bing Vision no longer looses focus and correctly adjusts the white balance in low light environments.
2) Updated Motion Sensors driver: Digital Compass is now faster and more accurate. The accelerator is also faster when switching orientation in Internet Explorer.
3) Updated Radio software: WiFi and Cellular data transfers appear to be faster (applications downloads are faster as are page loading times in IE9)
4) The hidden WiFi Network feature is now available.
5) Bing Music is now faster and more accurate (updated mic driver + radio update I guess)
samfirmware and sfunlock also released their flashing tool,does anyone know the difference between the 2 versions?
It's same version.
I already compared 2 versions.
any way to jailbreak this version?
i actually dont get it..
What is so special about this new flasher ?
1. We could update to Mango RTM before, why would we use this tool ?
2. It says we can unlock our phone .. does this mean sideloading apps ?
3. And what about the two "new" roms ? How are they connected to this tool ?
The Mango RTM you flashed is only the Microsoft part, you are still missing the OEM part - that is updated drivers (for proper Bing Vision work, ...). And those are included in this ROM.
But this ROM is not made for us, so it is in default blocked by the flashing app - not anymore, it has been patched.
sorry, but when I open the tool, it always sais: Open Phone image at : C:\mango\I8700XXKH2\I8700XXKG2_02_RC1.bin
This File is not a Eboot Image File!!
This File is not a PDA Image File!!
This File is not a CSC Image File!!
The "Start"-Button is not selectable - what am I doing wrong????? Please help! Thank you!
Uploaded with ImageShack.us
Actually, Mango which was provided unofficial routine is not contained System Device Drivers that is like compass driver.
U can use Mango, but u cannot use compass and some of other functions.
So u should update OEM Part to use all of functions.
I8700XXKH2 ROM is only for Samsung Engineer and it includes several latest drivers.
If u use normal flasher, u cannot update to XXKH2.
But this one is patched flasher, so u can flash engineering rom on your phone.
will this rom work for samsung focus?
jupp99:
u should choose all of appropriate rom files
combat7up:
NO, Dont flash on your phone.
okay cool thanks for the warning... and do u know anything about the samsung update? it slows down my phone... and the keyboard lagg!