hey I was trying to HARDspl my phone I tried the three cab files and got this error while trying to run the romupdate utility. I tried looking every where couldn't find the cause. Any help would be appreciated.
You don't run the RUU from your phone, you run it on your computer with your phone connected after you install those three .cab files.
ashasaur said:
You don't run the RUU from your phone, you run it on your computer with your phone connected after you install those three .cab files.
Click to expand...
Click to collapse
Thanks, I'll try that.
Related
Hi, all,
As a lot of you did, I got my wing and started to follow Nyer78's post "All you need on your wing" to try to optimize the phone, thanks to Nyer78.
But after I copied the first 6mb pool.cab to my phone and tapped it, I got an error message as the following:
"There is no application associated with "6mb pool". Run the application first, then open this file from within the application."
Could you help me to solve this? I'm very new to XDA and WM, and very eager to see my wing fly.
TIA.
Alan
You don't run the .bat file on ur actual phone.
Plug your phone up to activesync .. copy over the .CAB file and install it. I think you need to soft reset ... then once your phone connects to activesync again, you run the .BAT file on ur PC
hi people
I am looking out for a software for my Vista Operating system in which i can install cab files directly from my desktop without copying it to my device n then installing it.
There r many softwares actually but none of them r vista compatible..for eg cabviaactivesync.
Any developpers intrested in helping us out
WinCE CAB installer
Here you go:
http://forum.xda-developers.com/showthread.php?p=2212896#post2212896
You can drag and drop CABs there, or ever better, associate .CAB files with it in Vista, so, all you need to do to install a CAB is a double click (while having ActiveSync on of course)
wow so fast reply.thank u so much..i hope it works on vista.
i have tried this already but not working on vista..its says file cant be accessed!!even in admin mode
AthenaLod said:
Here you go:
http://forum.xda-developers.com/showthread.php?p=2212896#post2212896
You can drag and drop CABs there, or ever better, associate .CAB files with it in Vista, so, all you need to do to install a CAB is a double click (while having ActiveSync on of course)
Click to expand...
Click to collapse
How to associate .cab files in vista so that when i double click on it..it should start installing?i have winrar in my system.i removed the .extension but if i double click on it...the openwith dialog box will open
sathya said:
How to associate .cab files in vista so that when i double click on it..it should start installing?i have winrar in my system.i removed the .extension but if i double click on it...the openwith dialog box will open
Click to expand...
Click to collapse
I am using XP, but it should be the same on Vista... when the "open with" dialog opens, select wince cab installer, and select "always use selected program to open this kind of file"
wow program works fine here on vista. much easier than copying over then opening on phone, saves space too
I just tired reinstalling vista but for no use..it gives me the same error..plzzzz some one can write a script for vista..plzz
http://www.anichillus.net/index.php?topic=21.0
I hope its ok to post a link here? I found this a while ago and it works slick on my Vista 64 but there is downloads for 32 bit vista as well.
Hi thanks for ur reply..i have windows device central edition on my pc..My problem is that i want to install .cab file directly from my pc to my pda which is not possible with device central..it can install only exe files..i hope u got my point.
any one can help me install my cab files?plzz
why cant u just put the cab files on ur device and install there? it mite be inconvenient i guess..
bapssystupr3m3 said:
why cant u just put the cab files on ur device and install there? it mite be inconvenient i guess..
Click to expand...
Click to collapse
yes u r right..its really a pain copying the files to device n installing from there..any program u know for vista..i tried many but of no use
^^this works fine for me on vista, i just right click on the cab then send to, WinCE cab installer
Doesn't work for me. Get access denied. And what's worse: you can't uninstall the damn thing.
Edit:
Found it, just remove the Send to entry and delete cabinst.exe from Windows folder.
DizzyWeb said:
Doesn't work for me. Get access denied. And what's worse: you can't uninstall the damn thing.
Edit:
Found it, just remove the Send to entry and delete cabinst.exe from Windows folder.
Click to expand...
Click to collapse
same error here..**** i donno what to do..i googled for hours but found nothing..anyone can write a script?
plzzz help
even i am getting that file access denied.what to do???
Having recently upgraded to Windows 7, I bumped into this issue as well and googled my way to this thread, but found no solutions like you guys.
It seems that all would be well if I turned off User Account Control, which, however, I don't really want to.
Thus I did more searches and found the following article:
Selectively disable UAC for your trusted Vista applications
Although the steps described in the above article did not prevent a UAC prompt from popping up, my installation of WinCE CAB Installer works now.
I downloaded a lot of windows pocketpc applications for my Xperia and none of the worked... The following message comes up: "Is not a valid pocketpc application"
I had a lot of 2003, windows 5, and 6 applications, and games and they cant install or open!
How can I fix this?
RE:
Did you just copy the applications straight to your Xpreia then run the files? If so, you need to run most pocket apps on a PC first, then when you connect your Xperia to a PC then a window will pop up showing you the applications that need to be installed onto your Xperia. This is all Automatic, as long as you have installed the Phone onto your PC.
Hope this helps.
Joel
Yeah, that's the only real stupid crap on WM.
I could install any app on Symbian right on phone.
Why the hell they don't make all .CAB's??
I understand with big files, but with 100kB thing is plain stupid,
the whole idea of mobility dies with this.
P.S. I also have some apps like that, so what do I do?
Install it first on PC? And than what, uninstall it after installing on phone??
If you have it "install" on your pc only, it always leaves a .cab file somewhere to be downloaded to your phone later. That's how I extracted the CAB files from the executables I have anyway.
99% of apps can be obtained as cab. Only few I had to install manually (ie there was no CAB or PC EXE installer).
Most are avaialble also aso PC exe, but if someone bothers with EXE installer, he usually has CAB too (in fact he has to, since the PC installation shows some funky windows and then it simply copies the CAB to WM device).
Which is also where you can get the CAB. Unpack the EXE installer (very often possible, Total Commander can do that for example), locate the CAB inside it, and install the CAB manually.
Dr.Sid said:
99% of apps can be obtained as cab. Only few I had to install manually (ie there was no CAB or PC EXE installer).
Most are avaialble also aso PC exe, but if someone bothers with EXE installer, he usually has CAB too (in fact he has to, since the PC installation shows some funky windows and then it simply copies the CAB to WM device).
Which is also where you can get the CAB. Unpack the EXE installer (very often possible, Total Commander can do that for example), locate the CAB inside it, and install the CAB manually.
Click to expand...
Click to collapse
So you had plain luck,
50% of the apps which I want are these f**n .exe. Without any .CAB inside.
But I still didn't get how is the standard operation from PC.
What do I do first? Install the .exe on my computer and than connect phone? And what than?
sync your mobile with activeSync, install the application through pc, activeSync will start the installation on your mobile
Connect the phone to the PC via ActiveSync.
Run the exe on the PC. It installs on PC and copies the cab installer to the phone via ActiveSync. The phone should start the installation automatically.
I still wonder .. what applications are those ?
on8a said:
Connect the phone to the PC via ActiveSync.
Run the exe on the PC. It installs on PC and copies the cab installer to the phone via ActiveSync. The phone should start the installation automatically.
Click to expand...
Click to collapse
Great, thanks guys for replies.
I assume while installing I can choose the place of installation (phone/card....)
P.S. Can the .cab installer stay on device, for quick reinstall after upgrade?
Or you have to connect to PC again?
need a little help; new to the hd2 and just installed the hspl but i'm having troubles installing roms. i've downloaded two seperate ones and they both do the same thing......i plug the phone into pc, wait for activesync to sync, then open up CustomRUU.exe and nothing happens.....anybody have some suggestions? this is getting frustrating i'll take all the help i can get! thanks everyone....
are you putting customruu in the same folder as the nbh file of the rom you want to install?
are you running customruu as administrator? right click "run as administrator"
I have Hd mini and I would like to flash tom's Rom and I have wwe rom version 1。36。707。3 do I need to hspl my phone?
no,you just need sspl
thank u very much! but when I tried to sspl it, ithe ruu made error 260: usb failed..
can it be because i didnt connected it through the activesync?
cuz when i tried it didnt show me a way to see the fles on the mobile it just started sync..please help me
liorderei said:
thank u very much! but when I tried to sspl it, ithe ruu made error 260: usb failed..
can it be because i didnt connected it through the activesync?
cuz when i tried it didnt show me a way to see the fles on the mobile it just started sync..please help me
Click to expand...
Click to collapse
Yes,you need activesync if you use Windows XP or Windows Mobile if you use Vista/7
when the status says connected then you can start flashing your new ROM
tzacapaca said:
Yes,you need activesync if you use Windows XP or Windows Mobile if you use Vista/7
when the status says connected then you can start flashing your new ROM
Click to expand...
Click to collapse
sorry for all my questions, but I just need to connect my phone through ActiveSync to my computer,the it'll show remote disk of my storage on my computer,and the I activate the ruu and follow the instruction?
liorderei said:
sorry for all my questions, but I just need to connect my phone through ActiveSync to my computer,the it'll show remote disk of my storage on my computer,and the I activate the ruu and follow the instruction?
Click to expand...
Click to collapse
well..follow these steps:
1.connect phone through ActiveSync
2.run DFT_SSPL_MINI
3.click next...next...next
Good luck!
p.s. if computer sees the phone as disk drive then you didn't connect the phone through activesync!
tzacapaca said:
well..follow these steps:
1.connect phone through ActiveSync
2.run DFT_SSPL_MINI
3.click next...next...next
Good luck!
p.s. if computer sees the phone as disk drive then you didn't connect the phone through activesync!
Click to expand...
Click to collapse
but when i try to open dft_sspl_mini through activesync it just open the properties of the file instead of the file itself
liorderei said:
but when i try to open dft_sspl_mini through activesync it just open the properties of the file instead of the file itself
Click to expand...
Click to collapse
are you trying to open sspl on phone??
if not...then there is something wrong with your PC!
tzacapaca said:
are you trying to open sspl on phone??
if not...then there is something wrong with your PC!
Click to expand...
Click to collapse
no,im trying to open it through the computer,but i think i know why its happening,its because i dont have admin rights on it...
well thank you so much for your time,you helped me alot