Related
hi
I use MemMaid and the running process that uses the most memory is "gwes.exe".
the problem is ,that the amount of memory it uses just keeps growing,rising on a daily basis .I've found that a soft reset brings it right down again :lol: ,but then it starts to rise once more .
Does anyone have a similar problem?
Is there any way of bringing down its memory use without soft reset?
markbrudney said:
hi
I use MemMaid and the running process that uses the most memory is "gwes.exe".
the problem is ,that the amount of memory it uses just keeps growing,rising on a daily basis .I've found that a soft reset brings it right down again :lol: ,but then it starts to rise once more .
Does anyone have a similar problem?
Is there any way of bringing down its memory use without soft reset?
Click to expand...
Click to collapse
same to me. 10MB was the size of it. killing it makes the device freeze
don't kill gwes, it is a system process, stands for Graphics, Windowing and Events Subsystem.
i dunno why you get the memory leak, i don't. i always thought spb pocketplus is the culprit, but someone just claimed he had no leaks while using spb+. but give this a try if you happen to use it...
Same here and that is not just with gwes but with many other system files, but gwes is of course the biggest. Isn't this an issue with WM5?
I also use OxiosMemory and try to mitigate this by forcing the processes to release resources not in use, but that does not elimate this issue completely.
harryk1372 said:
Same here and that is not just with gwes but with many other system files, but gwes is of course the biggest. Isn't this an issue with WM5?
Click to expand...
Click to collapse
no, the explanation is not this simple. i run the same wm5 as you and i dont have this problem.
cmonex,
Can I ask you what apps you run? It might be the apps I am running that you do not run is causing the memory leak.
harryk1372 said:
cmonex,
Can I ask you what apps you run? It might be the apps I am running that you do not run is causing the memory leak.
Click to expand...
Click to collapse
i leave these constantly running all the time:
magicbuttons
taskmgr v1.6 (from buzzdev)
uptime
also usually leave these running:
totalcommander
opera
messages (sms)
occasionally using:
iGO 2006
Netfront 3.3
PQZII
vijay's full terminal screen hack
ftpsrv
phm regedit
tre regedit
adobe acrobat
mobipocket
wmirc
softmaker textmaker (wow sucks why no real vga)
tcpmp 0.71
hope this helped what apps are you running?
cmonex said:
hope this helped what apps are you running?
Click to expand...
Click to collapse
Thanks for that. What I run is quite a few and some are same as yours. The biggest difference is that I run Wisbar Advance 2 and Wisbar Advance Desktop to skin the GUI.
The apps I am constantly running:
Wisbar Advance 2
Wisbar Advance Desktop
SEVEN (mobile push email)
ATOK (IME for Japanese language)
DefSIPChange (changes default SIP)
PQz
The apps I am running occasionally:
Backup and Restore
GSFinder
MemMaid
Oxios CloseApps
Oxios Hibernate
PHM RegEdit
JpegCapture
TCPMP
VeriChat
Warm Reboot
GB-SOFT Tweak
Pocket Tweak
I will have to check the ones I am constantly running to see if any of them is causing this problem but it could be the first two on the above list.
hi
I run:
contacts
calendar
comm manger
internet explorer
resco file explorer
MemMaid
games
These I run most of the time and I frequently have to switch them off in settings/system/memory in order to keep a reasonable amount of memory free
However gwes.exe never decreases
Can anyone see a link?
markbrudney said:
hi
I run:
contacts
calendar
comm manger
internet explorer
resco file explorer
MemMaid
games
These I run most of the time and I frequently have to switch them off in settings/system/memory in order to keep a reasonable amount of memory free
However gwes.exe never decreases
Can anyone see a link?
Click to expand...
Click to collapse
hummm i didnt list the builtin apps but what i use from them is contacts, comm manager, PIE (very rarely), messages (only for sms), word... (sometimes the other office stuff too) would use calendar too but i always forget to note my todos in it
+ and i forgot to list nPOP (for emails) and a screenshot maker (magic something)..
anyway what you run doesn't sound too bad, if you really use no today plugins.. i got no idea.. what ROM version do you run?
The growth is because it caches icons (start menu - programs - settings) to speed up the display. At least that's my best guess!!!
hi
rom version:1.30.107 wwe
I did a soft reset today and gwes.exe went down to 4.22MB
I then ran only the wifi (comm manager) and gwes rose to 4.35MB
I ran it again after switching it off in settings/system/memory and it rose to 4.78MB
when I switched it off again in settings/system/memory it came down to 4.56MB but its obviously where the leak is.,because I didn't run anything else.
the problem is how do I stop it?
Hi all there,
same problem with my german VPA IV (Vodafone) even after several ROM upgrades (Jasjar, qtec, new vodafone ger) no changes of this strange behavior
I really hope, there's anybody out there, who can help us with this annoying thing.
This gwes.exe issue is experienced with WM2003SE as well. I found this in one of the threads in Windows Mobile Team Blog.
"With WM2003SE, I had issues like GWES.exe growing until I ran out of RAM. So, I purchased WM5, hoping the repurposed strata flash and new OS would resolve the issues."
You can also refer to below for gwes.exe in detail.
http://msdn.microsoft.com/library/d...ui5/html/wce50conshellanduserinterface146.asp
Someone was saying earlier in this thread that gwes.exe caches icons. That might be true but may not be just icons and that explains why gwes.exe grows. Or, it might be that some apps you are running are causing memory leak but that is not easy to spot on.
A workaround to this I use and can recommend to anyone having this problem is Oxios Memory 1.40. It's free!
http://www.oxios.com/memory/
One of its apps is Oxios Hibernate. WM_HIBERNATE is a window message that is generated by the Windows operating system and sent to an application when system resources are running low. All applications should get the message and handle it by attempting to release as many resources as possible by unloading processes, destroying windows, or freeing up as much local storage as possible without damaging the internal state of the system.
I normally run this whenever the free memory space gets low like down to 15MB before my device gets unstable. I normally gain quite a bit by reducing the sizes of gwes.exe and all other processes running are occupying and that I don't have to reboot my device everyday. Check the size of gwes.exe with MemMaid before and after you run this and you will notice how effective it is. :roll:
thanks harryk1372,
Oxios Memory 1.40 is great and I managed to release 3MB of memory.
However none of it came off gwes.exe.
Just a matter of interest ,how many times should I use Oxios Hibernate?
Every time I press it,I get some memory back.
markbrudney said:
thanks harryk1372,
Oxios Memory 1.40 is great and I managed to release 3MB of memory.
However none of it came off gwes.exe.
Just a matter of interest ,how many times should I use Oxios Hibernate?
Every time I press it,I get some memory back.
Click to expand...
Click to collapse
Maybe that gwes.exe did not have any resource to release at the point you ran Oxios Hibernate and it was already close to the bare bones. Try running Oxios CloseApps as well as Oxios Hibernate. CloseApps closes processes running in the background and that releases the memory used by those.
You do get some memory back by running Hibernate multiple times but the actual amount you get back is very small after the first run although the dialogue may say it is like 2 to 3MB released every time. I am not sure why this is but I think it is no use running it multiple times. Just run it once or twice a day when you find that the free memory is low.
As I wrote in the earlier post, Oxios Memory is just a workaround I found. It does not eliminate the problem completely and the memory resources used by the processes running will never go down to the level of right after the reboot of the device. I experienced that gwes.exe gradually grows in several days to the point when I need to reboot my device even with running Hibernate from time to time. It's just that I don't need to reboot it like everyday.
thanks harry
thank you very much
hey i had the same problem that is mentioned here....
i was running spb pocket plus when i noticed this....
now with ilauncher and spb diary i have around 25 mb at start up and hardly if any memory leak....
with ilauncher alone i have around 27.5 mb
also some software have been updated like pocket informant webis mail..my experience with them shows me that they have next to no memory leak...
what i have noticed is that applications which are not designed for wm5 have terrible leak....case in point....girders which i a game with simple graphics leaves me with only 9 mb when i exit the app...while with skyforce 1.22 (wm5) the leak is hardly 100-200kb
you could try htcAddicts:
http://forum.xda-developers.com/showthread.php?t=487490
it seems to be more powerful than Oxios
Hello! Me and a friend of mine just purchased the tmobile wings....i upgraded from the dash and him from the horrible SDA....well so far this is what we have done.
HTC Homescreen plugin + homescreen edit
Slide to UL (AC)
Iphone Window Theme
HTC Audiomanager
P Browser
TCPMP + Flash Video Software that allows utube among other sites -=)
Changed sliding keyboard sounds
Vtap (also allows utube, but tcpmp is the shat)
PSShtuXP
Icontacts
Pocket CM ( I don't have this anymore)
Overclocked to 247MHZ (not really sure what overclocking is, but hey most of you on here have done it, so why not)
We have both kept WM6 because it seems like Touch Flo still has editing, and i am attached to the microsoft voice sync program.
So all in all just making myself known on the forum, thanks again for turning my wing not only into a greater phone but now I want to call this isht a Tmobile Jet Wing.
I still don't understand some terms, don't know what flashing is, and wanted to know what other programs we could add to make our device function even better.
Is there a way to upgrade device storage? It seems to be my only concern. Thanks again.
Batman
__________________________________
TMO WING WM6 + Upgrades
NOW MY OWN TMO JET WING
Awesome. If you have any questions, don't hesitate to ask ... but please be sure to look through the forums first in order to answer most of your questions.
Flashing is installing a new operating system on your phone ... so think of it like taking Windows XP off of your computer, and installing Windows VISTA on your computer.
You should run the Quick Page Pool changer to get more device storage
http://forum.xda-developers.com/showthread.php?t=324955
Cool, i try to read as much info as possible before posting...so yeah ive read the newb's guide and all the links within...thanks i will try to pagepool again...lastime didn't work...but ill try hopefully this is a better file.
directions are sort of...or reall fuzzy for installation..so i am really confused...any other helpful links on this?
all you have to do ....
-connect your phone via activesync
-copy the EnableRapi.cab file over to your phone
-thru your phone's file explorer, find the EnableRap.cab file, and run it.
-SOFT RESET
-connect your phone to activesync again, and run the batch file for the pagepool size you want to have (4, 6, 8, etc...)
-Reset again
and voila, you should have the new pagepool settings now.
think i did it lol.....how much space should i have?
Stock memory settings were the following on my Wing
Storage
39.44
8.09
31.35
Program
43.87
32.20
11.67
duprade said:
Stock memory settings were the following on my Wing
Storage
39.44
8.09
31.35
Program
43.87
32.20
11.67
Click to expand...
Click to collapse
11.6 MB free RAM after page pool fix??? that's way too low buddy. which page pool setting are u using? 4,6,or 8? but then again, is that on idle, or did you were running some other application on the background?
I remembered when i first found out about the pagepool fix, I was able to get 21 MB free ram on start up and running around 18-19 on idle. (i was running the 6 MB pool setup)
Now, i flashed my wing with Touch IT ROM v2.3 and i get 25 MB free RAM at start up and 20-22 on idle.
as I wrote on there .. those the STOCK memory settings ... meaning from a factory wing.
So obviously, you look at the stock settings, and compare them to the settings you see after running the pagepool app.
This project is about rebuilding the touch.dll coude from the original dll assembly.
Latest package:
touch.cab
For adding the "developers certificate" ( read side node on update 21/11/08 ) you can use the following tool:
Microsoft Security Configuration Manager
--------------------------------------------------------------------------------------------------
Update 21/11/08:
Ive finally managed to rebuild the touch.dll from assembly and recompiled it and im able to boot the new touch.dll
Ive cleared some of the calls made to some old features implemented in the original file like the touch cube etc.
Be aware that this isnt for daily use and only for testing purposes. But I really need some input on speed and reliability because i cant test everything on my own ( i flash my device every 4 hours or so so not really long testing times ). If you are not affraid of hard resetting your device and are willing to participate in testing current work please do but dont keep me responsible for freezes etc
I have only tested it on udk R4 because its easy for me to test speed on manilla 2d and it gives me a good impression of daily usability. And because i removed almost all calls to the original cube code it wont be any good for cube lovers as and original HTC roms.
Keep in mind that all ive done now has been done during work in a few hours and although ive tried to be on the safe side i cant tell you all is working as its suppose to and I think i havent done more then remove about 20% of garbage out of it.
I know not all is as fast as its supposed to be but like i said im better safe then sorry and i dont wanna hardreset every 2 mins or so... Some good testing can be done in Manila2d like scrolling through images fast and scrolling through the bottom bar. Also ive noticed that scrolling through the normal "All programs" is still on the slow side ( still need to resolve a lot of scrolling issues... HTC has included a lot of codes for all sorts of winmo controls like listviews etc ) but if you open up the all programs in manila from the programs menu u will see what kind of speed it can work at minimum....
As for the priorities mentioned earlier in this thread im going to set both the priority256 and the priorityhigh256 at 109 ( original microsoft value that can be found at msdn ) in the cab file so we can test the touch interface as it was suppose to be set up... you can easily change these values as you like ( read earlier posts ). Setting it lower then 109 will give it an higher priority which will make the device suffer more from touch input... Setting it higher ( upto 255 ) will give the touch input less priority and will make rendering faster but can also come of the cost of reliability.
Side node:
Make sure your rom has the "Sample Privileged Developer" Certificate installed because i signed both the file as the cab with this certificate ( files need to be signed because of being system file and they dont get any trust at boot without a certificate ).
--------------------------------------------------------------------------------------------------
Start 15/11/08:
Ok so because i didnt had much to do this week i started digging into the touch.dll to see if there can be some solutions to the slow scrolling/stuttering etc when touching the screen.
I already found out that the graphics stuttering mostly happens due to the fact that the touch.dll is set to real-time process priority.
WinMo uses priority values from 255 (low) to 0 (real-time).. Normally touch should be set at 109 ( according to msdn ), but because htc put so much garbage in it ( touchflo related ) and it got slow as #@% they put the priority to 0 as a default and deleted the registry entries
Using IDA i found out that those registry values are still being accessed but since they are not there the default of 0 is used.
Just create the following key
HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Touch
And create the following values in it
Name value (DWORD)
Priority256 255
HighPriority256 255
This will not speed up the actual scrolling but it will also not make the device freeze when pressing the screen... So scrolling seems more natural. ( especially in programs folder and file explorer )
So this is not a fix but a good start for now.
Already found out a few things looking at the code that can be dropped out so im going to try to rebuild the touch.dll from asm without most time expensive calls ( hopefully shrike will help me out on this one ).
Let me be the first to say thank you. I am not sure I did the things right, but my Polaris seems more alive than ever. I will post an exported regkey, please confirm that I've done it correctlly.
I have noticed an improvement in sliding in S2U2 and on everything that involves touching the screen. This indeed is a great step forward for Polaris.
Thanks for trying... As soon as development will progress ill create a cab file which will include the registry keys.
Big difference... great job,
I've noticed though that in icontact, when you scroll contacts, the animation has to finish so that it can accept new gesture, so i set it to 109, scrolling is still good and icontact work propertly..
Great find Rogro! Was irritating me how the graphic stutters whenever I scroll in programs and phonebook..
Just wondering though, if it was such a simple fix, why did they remove the reg key to begin with? as far as i can see, the impact on the processor speed seems really minimal..
I look forward to more of your discoveries..
Nice job! Performance is much better... but in the all programs list the icons all still flashing when scrolling, although its much less.
Thank you
Great job in all programme speed seems little better.
nice
thanx
Hey Rog,
Nice to see you're trying different things.
I looked at my HD but it didn't have the slowdown the Polaris has. But it also doesn't have the registry keys... so i added them and soft reset. Now, my HD's TFLO3D is really unresponsive and stutters... So maybe it's only for non-TF3D devices?
Thank's
It's working well in my M-Amine 2.0 Final Rom.
Here is the little Cab.
EDIT: If you install this cab or change the register by hand (Is the same) , the scrolling work well but maybe you will have problems with Igo, TomTom or destinator.
Please take that in your mind.
Thanks a lot Rogro!! It's wonderful for every application that uses touch scrolling.
Why do HTC engineers leave us alone with those awful bugs? Is it so difficult to add those 2 DWORD values?
Actually it fixes the screen response AND the All Programs scrolling in Manilla 2D
thanks for sharing rogro82.
cheers
Thanks rogro82.
It's working
BTW i've notice something,,maybe wrong.
When you scroll (very fast) in file explorer or program folder, stoping it(the scrolling) with a sigle tap it's not so easy. Or when you tap to stoping it ,then turning to another direction(up or down).
Also the icontact scrolling isn't good enough.
I use the "cbolumar" cab.
BTW i've notice something,,maybe wrong.
When you scroll (very fast) in file explorer or program folder, stoping it(the scrolling) with a sigle tap it's not so easy. Or when you tap to stoping it ,then turning to another direction(up or down).
Click to expand...
Click to collapse
Thats because the scrolling is still way off in terms of speed... the only thing that happens when you change the registry settings is that it will not allow touch.dll to eat all resources and hang all other processes..
Maybe you could try to set it to 109 ( what it should be on a normal driver )..
I never use any gestures or whatever so setting it to 255 works for me for now until i can start cleaning code.
TomTom7 with these settings
Nice find. But in Tomtom7 something strange happens. I have to press the screen much harder then without these reg keys. I Use M-Amine's RTM rom.
Anyone else have this or is it just me having this bug?
ViNZ! said:
Nice find. But in Tomtom7 something strange happens. I have to press the screen much harder then without these reg keys. I Use M-Amine's RTM rom.
Anyone else have this or is it just me having this bug?
Click to expand...
Click to collapse
The same bug for me with Navigon Mobile Navigator 7
kr.,
Frepke
Bug with IGO 8
The same for me , i have a lot of problems with the screen in Igo , the problem disappear after delete the register changes.
To delete this, you must go to the register and delete the new values by hand, not the touch entry but the priority entries.
Only uninstalling the cab is not valid because the driver is in use.
Thanks a lot!
It's like early Christmas!
It´s because of people like you that my Polaris is an increasingly awesome machine. Continuing like this in the near future it will teleport me from one place to the other!
Keep up the good work.
Don't ever leave us Rogro!
TT6 don't work
The screen is no usable.
I have delete all the key and now work well
ROM M-Amine 2.0 Final ITA
Hi people,
I have just got my new Touch Diamond 2 and it's beautiful. I have spent several days googling looking for the best place of expertese for tweaking and customising, and it seems this is the place. I have never owned a Windows Mobile device or a HTC before, but I'm PC savvy and I want to tweak my new phone.
Among other things, I want to:
Be sure my phone uses Wifi when available instead of contract internet
Tweak the TouchFLO home screen (including analogue clock and RSS)
Find a list of the best and/or most popular mods/software
Where do I start and what do I need!
Congratz
As I've heard and noticed from my own TD2 is that it always uses wifi over data. But if you really want to be sure you can disable Data Connection in the Communication tab whenever you want to surf.
You can also in All Settings => Personal => Buttons configure that long hold button disables Data Connection.
As for tweaking I would download Diamond Tweak and Advanced Config
http://www.touchxperience.com/en/advanced-configuration-tool/downloads.html
http://montecristoff.webs.com/diamondtweak.htm
First law of windows mobile: keep the internal disk clean!
Install every new piece of software on the memory card.
For my TD2 I got a 16Gb microSD card and started with Advanced Configuration Tool v3.3 to tweak all storage-related paths to folders I created on the memory card.
A good place to start looking for tools is freewarepocketpc.net. A lot of more than decent free applications. The ones you don't like can always be removed in settings/system/remove programs, and replaced by commercial tools.
I disagree.. I used to install everything on the external card; and found two major disadvantages:
- some app will run a lot slower!
- if you use your sd card to store music video and other stuff
you better not have to change it...
I m more inclined to install less apps that filling the memory card with it.
The main use I have for the memory card is to store backups, documents, music, and install cab files.
robinVerdegaal said:
First law of windows mobile: keep the internal disk clean!
Install every new piece of software on the memory card.
For my TD2 I got a 16Gb microSD card and started with Advanced Configuration Tool v3.3 to tweak all storage-related paths to folders I created on the memory card.
A good place to start looking for tools is freewarepocketpc.net. A lot of more than decent free applications. The ones you don't like can always be removed in settings/system/remove programs, and replaced by commercial tools.
Click to expand...
Click to collapse
How did you get the tools to install?? I get an unsigned error for everything..
elmalote said:
As for tweaking I would download Diamond Tweak and Advanced Config
Click to expand...
Click to collapse
Why Diamond Tweak?
Better use HD Tweak:
http://www.montecristoff.com/hdtweak.htm
iluszn said:
How did you get the tools to install?? I get an unsigned error for everything..
Click to expand...
Click to collapse
Didn't have any problems. I got a warning, but no error after continuing.
elmalote said:
You can also in All Settings => Personal => Buttons configure that long hold button disables Data Connection.
Click to expand...
Click to collapse
Yeah I saw those button settings but couldn't work out what they meant. What is this long hold button? Is it the dial button that if you hold puts it on speaker phone? And how would you configure it for disabling a data connection, I don't see and option that would allow this?
I have seen that freewarepocketpc website, and had a snoop around. I have an 8Gb card coming today (hopefully!) and I was waiting to get that to install software on it. I read that might slow down some apps, now I'm not so sure what to do. However I want to avoid installing a load of software to try it out, then uninstalling it. It is windows after all. That's why I wanted some recommended software from people on here.
Question: Will that configuration tool allow tweaking of the TouchFLO stuff? Has anyone changed the clock on the TouchFLO Home page thingy?
Thanks all for your help
You have to chose the tab "End Key" under the Button setting menu and then chose the "terminate data connection" option
Ahh I get it now, had a look at those keys thanks. Going to use Advanced Configuration Tool when I get my memory card (still not here yet!)
The best single piece of advice I can give any TD2 owner is to ditch TF3D and at least try living without it. Your rewards will be more available memory, faster operation, increased functionality, full use of applications' today screen plugins, less (or no) bugs, and the cost is it doesn't look as nice.
In a couple of months' time, WM6.5 will be out and then even the looks will be there.
After much research I have ditched TouchFLO and got SPB Mobile Shell 3. I keep hearing about bugs but I am yet to encounter one. I have to say that SPB Mobile Shell 3 is what I would have expected to have on a phone like this. TouchFLO looks good, and I have a friend that loves it, but you can't customise it very easily. Simply having the widgets in SPB Mobile SHell 3 makes it a better, mnore customisable and quicker interface.
I currently have Total Commander as an explorer replacement. I'm not sure if this is the best, but I have yet had time to do proper research. It's supposed to have a registry editor in there, but for the life of me I can't find it :/
Had some serious fun with video playback. I wanted to play full quality (not HD) dix files, DVD rips and the like. After much fun with different software I found that Coreplayer blows everything out of the water. My expectations had dropped about what I might be able to watch on my phone after having problems with other media players, but Coreplayer can play full movie DVD rips with no stuttering and it looks awesome.
Still some fun to be had tweaking, for example finding out if/how java stuff will work, trying to find something for email/sms, and some "cool" apps to impress my gran.
I'm no expert but purely from personal experience the first steps are:
1) Install Resco Explorer
http://www.resco.net/pocketpc/explorer/default.asp
2) Install HTC hotfix for Diamond 2
(http://www.htc.com/uk/SupportDownload.aspx?p_id=249&cat=0&dl_id=563)
3) Install .NET Framework 3.5 (requirement for a bunch of 3rd party software)
http://www.microsoft.com/downloads/...FD-AE52-4E35-B531-508D977D32A6&displaylang=en
4) Install SKTools (needed for many things but especially for next step)
http://www.s-k-tools.com/index.html?m_products.html#tools
5) Use SKTools to disable ActiveSync (results in huge improvement of battery duration)
5a) Disable the repllog.exe (which is the application behind ActiveSync) associated with ""AppRunAfterTimeChange"" in Notifications Queue
Alternative way is to install Dotfred's Task manager and kill repllog.exe: http://forum.xda-developers.com/showpost.php?p=3175757&postcount=50
5b) Follow the steps 1-7 in the thread: http://forum.xda-developers.com/showthread.php?t=288352
5c) Install eLiAs_ASyncKiller.cab
http://forum.xda-developers.com/showpost.php?p=3048077&postcount=40
6) Install HDTweak for various tweaks (eg for improvement of TouchFlo response)
(http://forum.xda-developers.com/showthread.php?t=452505)
7) Install sdkcerts (needed for "cosmetic" interventions eg Hall Feica fonts in TouchFlo, slpashscreens, topbar etc)
http://forum.xda-developers.com/showthread.php?t=471604
http://forum.xda-developers.com/showpost.php?p=3661976&postcount=80
http://forum.xda-developers.com/showpost.php?p=3861405&postcount=2
8) Install Diamond D3D Video drivers using the first attachment from:
http://forum.xda-developers.com/showthread.php?t=475493&highlight=ATI+3d+driver
Before installation download and run the fourth attachment (Lights.exe)
Install the drivers and then run Lights.exe again to see the huge improvement
9) Install G-Config (for forcing applications to go into landscape mode)
http://forum.xda-developers.com/showpost.php?p=3848546&postcount=3
10) Enjoy your Topaz
P.S.: Backup your Contacts, Calendar etc frequently
harisg said:
I'm no expert but purely from personal experience the first steps are:
Click to expand...
Click to collapse
You may think you are not an expert but your post is very useful (and very well formatted).
Thanks
The hotfix is only required if you run TF3D right?
nice guidelines dude.. thanks
chch said:
You may think you are not an expert but your post is very useful (and very well formatted).
Thanks
The hotfix is only required if you run TF3D right?
Click to expand...
Click to collapse
According to htc europe:
If you move to the Settings tab in TouchFLO, the top part of the item descriptions under Communications (WiFi, Bluetooth, phone, data) are slightly cut off. If this happens, please download this hotfix to solve the problem.
So I think the answer is yes
Oops I forgot the very useful CleanRAM from htcaddicts:
http://forum.xda-developers.com/showthread.php?t=514333
I use its embedded scheduler so it runs automatically every 3 hours claiming back megabytes of RAM
Mark it as step 11
I currently have Total Commander as an explorer replacement. I'm not sure if this is the best, but I have yet had time to do proper research. It's supposed to have a registry editor in there, but for the life of me I can't find it :/
Click to expand...
Click to collapse
Double click on "\\Plugins" and you'll reach the hidden options including the registry editor. I've been using Total Commander for years on various ppcs, it's all you need for registry work.
harisg said:
6) Install HDTweak for various tweaks (eg for improvement of TouchFlo response)
Click to expand...
Click to collapse
Hiya, great post~!
I have the Diamond2 as well... wouldn't I want to install 'Diamond Tweak' instead of 'HD Tweak'? Are they essentially the same thing, or does HD Tweak offer more functionality for the Diamond2?
Cheers,
Diamond Tweak is for the older version of TouchFlo, use HD Tweak.
Since there is no push Internet and TouchFlo is only 5% of the mem usage. Anyone know why this phone uses more mem on boot than TP2? I have been poking around running apps and haven't found a hog yet.
Anyone else find any app using a large amount of memory?
You can install the proxy for the cdma touch pro 2 (Rhodium) and it will cut the memory down to about 50% usage. I noticed that mine was running in the mid 70's so I started experimenting with Touch Pro 2 stuff since that 's what I had before and the .cab's were still on my memory card.
Hey guys,
I'm new to the website. Just got my Imagio and liking most of the features. Can you tell me where I can find this .cab file you're talking about. I looked through the touch pro 2 threads but couldn't find anything.
Thanks for the help
http://forum.ppcgeeks.com/showthread.php?t=85996&highlight=disable+push+internet
These 2 cabs worked for me reduced mem usage from 70s to 50s
Read their entire thread, seemed harmless, and installed both cabs. I went from 70% to 50% with no negatives yet. I don't even see the slow Opera loads that the thread mentions. Thanks for the link!
Maybe the pagepool is set too high and/or the freaking MediaFlo service is always running (almost 600Kb worth of precious memory)
Worked for me as well. Thanks for the help
I am never going to use media flo. Hopefully we can find a way to strip it out of the Imagio.
I did install the SSK TP2 Dynamic Resource Proxy.cab which recovered some RAM. The Imagio does still seem slightly slower than the TP2, probably just 6.5 vs 6.1.
rolandroland said:
I did install the SSK TP2 Dynamic Resource Proxy.cab which recovered some RAM. The Imagio does still seem slightly slower than the TP2, probably just 6.5 vs 6.1.
Click to expand...
Click to collapse
i doubt it since i just saw a post at engadget mentioning that 6.5 is noticeably snappier on the same hardware vs. 6.1. i believe they were speaking in reference to the Leo though so it's not an apples to apples comparison.
I had both devices, the TP2 is definitely a little quicker. The leo/hd2 is obviously a different animal all together.
The mem fix for the Imagio is temporary, after a day it is back in the 80's% utilization w/o a reset. The proxy was the same for the TP2, except the disabling the push internet provided some permanent relief. I'm sure once it is unlocked and roms are cooked things will get better.
So when/how does this cooking process begin? Does it take a long time to get a stripped-down Rom?
That VCast Mobile TV Icon is really bugging me, and I'm sure its just eating away at my memory. I also really don't need all that other VCast/Mobile IM/VZNavigator junk that they put on there to increase monthly fees.
makryger said:
So when/how does this cooking process begin? Does it take a long time to get a stripped-down Rom?
That VCast Mobile TV Icon is really bugging me, and I'm sure its just eating away at my memory. I also really don't need all that other VCast/Mobile IM/VZNavigator junk that they put on there to increase monthly fees.
Click to expand...
Click to collapse
I think an Unlocker is being worked on, or needs to be worked on before any ROM cooking is possible. Depending on whether anyone has an Imagio they are able to toy with in this regard and how knowledgeable they are, it could be tomorrow or months before we see this happen. I'm hoping it will be sooner than later of course. =)
You can remove the Verizon programs by deleting them out of the programs files directory then going into the windows/start menu directory delete the shortcuts. It will free up around 20-25mb.
--
MediaFLO
modclient
V CAST Videos
VVM
VVMStart
I installed this one "SSK TP2 Dynamic Resource Proxy.cab", but what does the other cab file do and where I can I find it.
After installing both of those programs, my memory usage is down in the low-fifities. Of course, it slowly creeps up throughout the day. But at least now, the creep is from 50--> 70 rather than 60-->80.
Boss428man said:
You can remove the Verizon programs by deleting them out of the programs files directory then going into the windows/start menu directory delete the shortcuts. It will free up around 20-25mb.
--
MediaFLO
modclient
V CAST Videos
VVM
VVMStart
Click to expand...
Click to collapse
This will simply free up storage space on the device ROM, not RAM correct? Or does removing these mean that less is loaded into RAM at startup? And do you get any startup error messages when you soft reset after doing this?
Now i could be wrong but I don't think any of them load to ram unless you actually run them. But yes that will only remove them from the storage memory.
My previous Verizon Diamond used even more memory then the Imagio % wise. I actually feel the Imagio is pretty good with ram by comparison. The crappy thing with my old phone was the storage would fill up with only the basics installed so I had to remove every VZ programs just to keep it from being totaly filled.
I really think touchflo uses a lot of memory combined with emails, sms, and the dialer and any other dormant software you have scheduled to run. That is just my take on it.
I've been playing with my imagio pretty much all weekend and I notice the amount of memory being used too. Mine hangs around 74 to 75 percent with TouchFlo 3d enabled. I noticed that once I disabled TouchFlo 3d my memory usage dropped to 65 percent. I'm thinking TouchFlo 3d is using roughly 10% of the ram.
I've installed the SSK TP2 cab and reset the phone, the memory usage is at about 52%. Without launching any apps, it slowly increases over a few hours and tops out in the mid to upper 70s. I reset and it's back down to the 50s.
I will say that as far as general usability, i don't notice any slowdowns in touchflo or other apps when its in the 70s. It's more the principal of wanting to run it as lean as possible, maybe gain a few minutes of extra juice