Related
I have read and tried anything I could think of here.
I have downloaded RC29
Extracted the file to SD ccard formated to FAT32
Started up in Bootloader
Phone found the file and successfully installed
Pressed action button to reboot.
Stays in Tri color screen
I have tried the soft reset, but I am still stuck at the G1 screen.
I am not new to flashing and recovery, only to the G1. What am I missing?
Does it reboot and return to the tri-color screen, or not reboot at all? Did you try taking the sd card out and then rebooting?
The same thing happened to me, I downloaded rc29 to root my phone so I did the rooting and then I wanted to install the JF Rc33 update so I tried rebooting in recoveyr mode to install the update and my phone just got stuck in the G1 logo. It works on normal reboot but not in tecovery mode or when I press camera & power it takes me to a white screen with green letters and the little green android guy..... how can I fix that? I want the jf update. Is there any way of installing it without having to use recovery mode? Or is there anyway to fix recovery mode?
danguyf,
Thanks.
I just redid the RC29 boot off the SD card. Just to rule out some more issues, I formatted the card again (512mb Sandisk).
As soon as I hit the action button, I get the tri color bootloader screen.
I have tried:
removing the SD card PRIOR to pressing the action button
removing the SD card PRIOR to a soft boot (call, end menu).
I have been using a fully charged battery.
wpr said:
danguyf,
Thanks.
I just redid the RC29 boot off the SD card. Just to rule out some more issues, I formatted the card again (512mb Sandisk).
As soon as I hit the action button, I get the tri color bootloader screen.
I have tried:
removing the SD card PRIOR to pressing the action button
removing the SD card PRIOR to a soft boot (call, end menu).
I have been using a fully charged battery.
Click to expand...
Click to collapse
Looks like you dont have rootacces, try this http://www.multigesture.net/articles/t-mobile-g1-downgrade-rc30rc8-rooting-update-tutorial/
Thanks. Gotta learn a new OS!
I will give this a try in a few and report back.
Oke good luck !
You need a WM phone to make a Goldcard and Qmat 2.24 if you use Windows.
Ronnymes said:
Oke good luck !
You need a WM phone to make a Goldcard and Qmat 2.24 if you use Windows.
Click to expand...
Click to collapse
Thanks. I might need more than luck.
What is Qmat 2.24? Boy I hate feeling stupid!
wpr said:
Thanks. I might need more than luck.
What is Qmat 2.24? Boy I hate feeling stupid!
Click to expand...
Click to collapse
Try google
wpr said:
I have read and tried anything I could think of here.
I have downloaded RC29
Extracted the file to SD ccard formated to FAT32
Started up in Bootloader
Phone found the file and successfully installed
Pressed action button to reboot.
Stays in Tri color screen
I have tried the soft reset, but I am still stuck at the G1 screen.
I am not new to flashing and recovery, only to the G1. What am I missing?
Click to expand...
Click to collapse
Just so we are clear, these are the steps you followed???
1. Format your phone's SD card to FAT32 mode:
* Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
* Click the notification, and then click "Mount".
* A new removable disk should show up on your computer. Right click it and select Format, and select FAT32 as the file system type.
2. Download and unzip the RC29 or RC7 image file. Copy the DREAMIMG.nbh file to the SD card. (RC29 for US, RC7 is for UK)
3. Turn the device power off.
4. Hold Camera button, and press Power button to entry bootloader mode. You should see a gray/white screen with instructions to flash your phone with the update on your SD card. If you don't see that, make sure you followed the instructions properly.
5. As per the on-screen instructions, press the Power button to start upgrade procedure. DO NOT DO ANYTHING TO INTERRUPT THIS PROCESS.
6. After it is finished, perform the restart your phone.
The phone is not mine. It came in to us to recover. It came in frozen on the G1 screen, so I cannot perform these 2 steps:
* Hook your phone up to your computer using a USB cable and then wait for the notification to show up in your title bar of your phone.
* Click the notification, and then click "Mount".
It does charge via USB and AC.
It is now powered up and frozen, but XP does find the Android phone and it shows up as a disk drive in device manager.
First off, who froze it?
Secondly, does the phone get to the homescreen?
The user brought it in at the G1 screen.
That is as far as it gets in power up.
wpr said:
The user brought it in at the G1 screen.
That is as far as it gets in power up.
Click to expand...
Click to collapse
i hope you have a computer and either an extra mini sdcard *1MB in size* handy, or a mini sd card reader handy.
format the card, fat32.
download the rom from here. *scroll down to downloads section and pick the appropriate one. rc-33 U.S. RC-9 U.K. ADP unbranded*
if it's already named update, transfer it to the card, if not rename it update, then transfer it to the card.
After it has been transferred.
place the card back into the phone. start the phone up holding home and end key till it enters the recovery mode.
you should see a list of commands with a leopard looking-like screen.
hit alt-w
then alt-s
after it is complete, hit back+home to reboot again.
Just wanted to follow up annd say thanks to everyone for the help. I did not get a chance to deal with it today, but I will post the outcome.
I have the same problam too.
I have JF 1.1 Holidey version and when I try to update it to jf1.5 it gets stuck on the G1 logo, I tried using differnet updates to and differnt sd cards
and even tried the JF updater and it dosent work, I'm a bit frustrated, my brother rooted the phone for and installed the RC29 rom and the JF rom,
it offered me a system holiday update awaile ago and when I updated it froze on the G1 logo after I waited a long time (about 45 min) I removed the battery and started the phone again.. then I saw about 35MB free space (before I had only 10MB) and I think that from that point it added the holiday but I'm not sure if it wasn't already before that.. I realy need your halp with this.. I can't find a way to boot my phone and start a bootloader..
p.s. I was able to get to the fast boot when I press the power + Camera but I don't know how to use it..
Follow the same directions in post 14 =)
Mikey1022 said:
Follow the same directions in post 14 =)
Click to expand...
Click to collapse
I have a big problem!
MY G1 is still Frozen on G1 splash
I don't have access to the recovery mode (power+home), or fastboot mode (cam+power)...just show G1 logo...for hours!!!
Any idea?
I need to access to any mode to try to rescue my phone...
It is the second phone rooted by me, but I don't know what happened =(
thanks for the quickly answers!
No update
Mikey1022 said:
i hope you have a computer and either an extra mini sdcard *1MB in size* handy, or a mini sd card reader handy.
format the card, fat32.
download the rom from here. *scroll down to downloads section and pick the appropriate one. rc-33 U.S. RC-9 U.K. ADP unbranded*
if it's already named update, transfer it to the card, if not rename it update, then transfer it to the card.
After it has been transferred.
place the card back into the phone. start the phone up holding home and end key till it enters the recovery mode.
you should see a list of commands with a leopard looking-like screen.
hit alt-w
then alt-s
after it is complete, hit back+home to reboot again.
Click to expand...
Click to collapse
And what about if the screen says:
Finding update package..
Opening update package..
E: Can`t open /sdcard/update.zip
(No such file or directory)
Installion aborted.
G1 homescreen freeze
Hi,
I have a G1, installed hero-rom from xda(Jacheroski 2.0). I found it pretty annoying because the phone was very slow etc. So i tried to go back to the almost original software.
1. started G1 in recovery mode(Home+power), alt+x, adb shell, #parted /dev/block/mmcblk0, mklabel msdos, Y, rm1, rm2, mkpartsfs, primary, fat32, 0, 8000(8 gb card), shut down G1.
Downloaded:
- Radio (from htc support)
- SPL (from xda)
- Rom (from htc support)
Copied those files to my SD.
2. started my G1 in recoverymode(Home+power), wipe, apply any zip from SD,
First installed Radio = succesful
Tried to install SPL:got an error in line.
So thought that I first need to reboot my G1(because of the radio)
I rebooted my G1. got a installation screen. then I restarted my G1 and wanted to go to recovery mode to install spl and rom. It was frozen on the homescreen. I can't do any thing. not recovery not the other one(camera+power)
Any advice?
Hello XDA-devs forums,
I'm having an issue since yesterday.
I have rooted my Huawei Ideos X5, and it ran fine for a day or so.
However, when my battery ran out it shut down into a completely blue screen.
When I tried booting it again, this just showed me a blue screen as well.
Now, I fixed this issue by connecting the phone to my PC after booting it with the Vol+ and Vol- pressed.
(So you get the pink/purple screen)
However, when I opened the phone on my PC, all I saw was a "239 MB" "empty" space, and it should have ~2GB..
I placed a backup copy I saved of my "image" folder in that 239 MB storage, and it booted.
However, today I hooked it up to my PC again to see if it magically changed..
And I couldn't access the 239 MB space anymore.
When I tried fixing the issue with a reboot of the phone, that just caused it to get stuck in a booting loop.
So now I'm stuck with a phone that keeps trying to boot itself,
and I can't access it on my windows PC.
I can, however, access 4 different folders of the phone on my linux notebook.
Now, my question is: can someone with a good understanding of problems like these please help me out?
I'm getting kind of fed up with it, as I've only got the phone for 2 days now.
Thank you in advance, and thank you for taking the time to read this.
Have you tried removing the battery for 5 minutes and then putting it back in?
After this, what happens when you press VOL+ and Power?
How about if you press VOL+, VOL- and Power, without the USB cable?
Hello Katu, thank you for posting.
Regarding your questions:
Yes, I have tried to take out the battery for 5+ minutes- it didn't change anything to the situation unfortunately..
If I press VOL+ and Power at the same time, the device boots into recovery mode.
In this I have tried to format the device in order to reset it to factory defaults, but this did not help either.
When I press VOL+, VOL- and Power, the phone boots into the pink/purple screen.
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
PlanDreaM said:
Can you try a custom recovery and a custom rom? I want to see if your onboard flash is borked.
u8800,cm7,[email protected]
Click to expand...
Click to collapse
Well, I used an original ROM:
U8800 V100R001C00B136(Overseas General version)
And that resulted in the boot.img being corrupted, so I can't even overwrite that anymore.
Also, this is what I see when I hit VOL+, VOL- and Power at the same time to boot into safe mode, and connect it to my PC.
img69 [dot] imageshack [dot] us/img69/244/10101191548pm.png
julle131 said:
I had the same when my phone got f*ucked up. Put the image folder, than download official rom, like b138 and install it. then check your imei. There is a change that it will be 0.
Click to expand...
Click to collapse
I installed the official B136 rom, and after it rebooted, it would just hang on a black screen.
(it used to show the IDEOS or Android logo when it booted)
Hmm mine came with this Rom
U8800 V100R001C00B135SP01 ( general )
Looking at your name you're from the Netherlands ( so am I )
where did you get this 136 version from ?
I would try to put this one on it
You have to put the 'dload' folder into the root of your SD Card,
then boot into boot-loader, after that it'll automatically flash back to the stock Rom.
1 Format SD card
2 On the SD card, create "dload" folder
3 Put the unzipped Rom into "dload" folder
4 Then boot to bootloader (pink screen)
Yes, mine came with that version as well.
However, I couldn't find it anymore and thus downloaded the version I said earlier.
Also, I did everything as you described, except step 4.
You have to boot to recovery instead of bootloader. (VOL+ and Power)
Anyways, I managed to get ClockworkMod's recovery.img on my phone,
and from there on install a custom ROM on the phone, which magically got it working again - even though it didn't work earlier.
Thank you for reading my thread and taking the time to reply to it.
My issue has been resolved.
just for the record, flashing a stock rom is different from flashing a custom rom..
the 4 steps described by Gman2oo6 is the correct way to flash a stock rom (and it is written clearly in the document that is in the stock rom zip file)
[edit]
step (1) is not a necessary step though..
Yeah, I noticed that.
What I did was format my SDcard with FAT32,
and put a custom rom (update.zip) on the SDcard.
I then booted ClockworksMod Recovery and installed the custom rom from the SDcard.
When I tried installing the stock rom, I just followed the PDF file's instructions that came with the stock rom.
hey i udated to GB 2.3.4 (official)and i didnt like the it cuz the wifif ddnt work and the bluetooth also the DATA so itryed to downgrade to 2.2.2 original official and it did the 2/2 steps intalled and when it restarted it did not want to turn on all that happened was it vibrated and thats all so i left it on like that and when the battery died i plugged it in to the AC and the LED turned on red and the touch kkeys also but not the screen so i really NEED help!
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
i tryed it
nope nothin good happened all that happens is a blank screen with nothin on ,LED is off and the touch keys are off. it justz vibrates and when i put the battery it turn the LED on to red and the touch keys turn on but then like 5 min later the LED and keys turn off
astewart said:
Try to turn it on with lead connected but no battery and see if you can start it.
My battery also went dead flat this morning and I couldn't get it started at all till I tried this. Once I got it started the only thing I could do was quickly pop in the batery and let it charge. Just leave off the cover till you get it going.
I have to add that I did not have the problem of a failed update to deal with but it may at least get you started
Click to expand...
Click to collapse
ok heres what i did i wanted to upgrade my phone to the newest version GB 2.3.4.So what i did was download the update and i followed the installation steps i successfully updated to Gb 2.3.4. so like i was checking how it look and the new feature but when i wanted to go on the android market i went to setting and turn on the wifi and it said Error and then i tried the Bluetooth and it said Error also so then i put my SIMs card in and i was like imma use DATA then and when i restarted my phone it had service but no HSPA+ or Edge or GPRS so like i just hatted my phone from their so then i was trying to root it but iddnt know how to do that so like i read this website and i got the UPDATE.APP or 2.2.2 AT&T did the same steps of the installation of BG 2.3.4 and it went to the process and 1/2 stepp good it passed and then 2/2 also passed it installed it and when it said Successively Installed it said Restarting and the scrren turn of and it vibrated and thats all that happened and i left it like that for the whole days and nothing happened
Do u got any idea?
When i connect it to my laptop it says installing drivers .then its says sucesfully installed drivers ready to use. so then i got to Device Manger and i check what has been installed and their it said USB Human interface device and HID-compliant device WHAT DOES THAT MEAN??
Not sure about the HID (human interface device) probably just the way windows sees the device for interfacing with it. With regards to the not booting I have read a lot of people saying that you need to factory reset and clear cache after the upgrade/downgrade. With the phone off, turn it on by long pressing volume+ and power on button till you get the blue recovery screen and from there you can reset factory/ data and also clear the cache. from what I see this should clear up the problem and start up. Please read this thread, it may help you somehow..... http://forum.xda-developers.com/showthread.php?t=1420728
Hope this helps a little
U mean Boot recovery and imma try it and thanks ill check it out
Sent from my MB300 using XDA App
all that i know is that if u customized your partition, it'll bootloop,
so go back to stock-partition ^^
How do I do that got like the steps or video?
Sent from my MB300 using XDA App
when i downgraded to 2.2.2 i installed this V100R001C00B138SP04CUSTC185D002
http://forum.xda-developers.com/showthread.php?t=1251250 got it from that link
Looks like you are not having much luck. Did you try to factory reset?
astewart said:
Looks like you are not having much luck. Did you try to factory reset?
Click to expand...
Click to collapse
well how do i do that do i need to got to the purple/pink screen or bot recovery cuz i cannot access that my phone doesn't do anything pretty much
hi guys.......
my phone issue is still not solved.
i have a U8800, came with 2.2.1 b136 rom. all things used to work fine and one fine day while i was out and the battery drained off, Returning back home i plugged my phone to the power and kept for charging as usual. in the morning when i power up the phone it started but got hanged up on the android text animation screen and then a loop of same. from that day onwards my phone is not working.
it starts up showing big huawei screen and proceeds to the android text animation there it get stuck for a few seconds and then again back to android text animation continuously the same.
I can get into the pink screen bu pressing Vol up + Vol Down + power.
I can also get to the blue screen Vol Up + Power.
i cannot change any thing in any of the drives or partitions in the pink screen. the image folder (in the pink screen), and other partitions also all the 4 partitions are freezed. even if i delete or replace files, the previous files comes back the very next movement. as if the memory is freezed. i even tried to format the 253 MB partition (image folder partition) but format gives error cannot format this drive , checked the attributes is unchangeable read only partition.
i tried updating official rom 2.2.1, 2.2.2, 2.3.5, but update failed, Some times even it reaches the update process to STEP 2/2 and there its like hanged the progress doesn't moves further even tried keeping hours, also tried update without battery but the same.
OK logically i assume i cannot update if the partition is read only. but why is it.
it used to be a working phone worked well and once sudden day its like.......
Is my phone bricked and what i can do to get it on. please help.
i cannot go asking for warranty as it is already out.
i am been asking for help like more then 45 days.
Warranty?
Sent from my u8800 using xda premium
I found the solution is working:
sorry for my English (I use the translator)
I noticed that when inserting the USB cable the phone came on,
well, same with dload in sd, volume + volume - and insert USB cable
without pressing the power button starts the update.
ettoremarzan said:
I found the solution is working:
sorry for my English (I use the translator)
I noticed that when inserting the USB cable the phone came on,
well, same with dload in sd, volume + volume - and insert USB cable
without pressing the power button starts the update.
Click to expand...
Click to collapse
well ettoremarzan
I do the same as to update without using battery but still it doesnot update !
Any ways i will try again without holding power ...........
my problem is my phone doesnt get updated with any rom even the stock 2.2.1. and just keep it into boot loop at android animated logo screen.
Well Maksimitoisto, i cannot claim on my warranty as it is already out and sencondly befor i can put efforts and take pain of paying for another phone or replacement, i want to try max what we can do on it to solve the issue.
since the phone can boot into the Pink and blue screen and also the normal way (with boot loop) i belive its not more then a software problem, the only thing is i need to get the right to overwrite it.
Any help please write.
Appreciate everyonce solutions & support.
Please help ...
I know things like this are asked many many times, but I couldn't find a way to get it working :-(
I've got a Huawei u8800+ from merimobiles yesterday. The first time I tried to get into recovery mode the phone was going for a firmware update and got stuck at step 1/2 "update failed", so I had to pull out the battery. So from ths point on, everytime I boot my phone (without an sd card) it keeps on updating (and failing). So I tried to get the pink screen and connected the phone to my pc. I then accidentally formatted the image dir on the phone instead of the sd card
Here are the problems I'm facing
1. Without an sd card the phone always tries to update.
2. With a sd card and a dload folder I get a blue screen (normal boot, boot with volume +)
3. With a sd card and volume + and - I get the pink screen. So I can still access the phone ... but I have no idea what to do next.
It looks like somehow it doesn't matter what's on the sd card ... it just won't update what's on it (tried several sd cards .... all FAT 32 and a dload with an UPDATE.app in it)
I've already created a image dir with recovery.img boot.img etc ... but without any luck ...
So...is it still possible to flash any firmware?And ... does anybody know which kind of firmware version comes with a Huawei u8800+ from Mermobiles (I haven't heard from them yet).
If someone would be so kind to post the image dir somewhere that would be highly appreciated
Many many thanks in adance
Regards
Oh and by the way ... when you put a dload folder with an UPDATE.app on your sd card and you press the power on with volume + and - , you shouldn't see a pink screen but the update should start automatically?
Still no luck with finding an answe to my problem
I really hope someone could help me out.
No, if the update found on sd card, you will not see the pink screen. The update will start automatic.
Try to power off the device, remove the battery and connect it with usb cable on pc. Then press the combintation of power,vol+, vol- buttons.
Thank you for the reply ... I've alreaady tried to pull out the battery and connect it to the PC, but with volume + and - it gives me the same pink screen :-( and without pressing the volume + and - it gives me a blue screen :-(
Finally got CWM to work so I can flash roms .... but with every rom (tried 2 roms) the phone just crashes (no reboot .... a real crash) ... what can be the case?
Can it be because the kernels?
Thanks in advance
I have a big problem with my motorola pro plus all of a sudden without installing anything just keeps rebooting after loading the system works already completed or the touch and then crashes I tried to reflash but still does not work and now I can not even to access the recovery because it is as if it does not work most of the vol + button that is why we will reach the vol - it works but i can not confirm the fastboot and other objects in the recovery the same thing with the R + M + POWER i see liconicina but I can not enter the menu require help thanks in advance
DarkDreamOff9 said:
I have a big problem with my motorola pro plus all of a sudden without installing anything just keeps rebooting after loading the system works already completed or the touch and then crashes I tried to reflash but still does not work and now I can not even to access the recovery because it is as if it does not work most of the vol + button that is why we will reach the vol - it works but i can not confirm the fastboot and other objects in the recovery the same thing with the R + M + POWER i see liconicina but I can not enter the menu require help thanks in advance
Click to expand...
Click to collapse
helppppppp
My Pro Plus has started doing the same since mid-April.
So far, I've tried removing some apps but nothing has been effective in locating the source of the problem.
Logcat hasn't given me much help.. fatal errors seem to happen with no single app/process.
It'll reboot probably a maximum of 4 times over.. once which gives no phone reception before settling.
So far, I've found that the phone behaves itself with the SD card removed.
I've tried reformatting the SD card before copying all my files back over to it.
I've tried rebuilding the Android folder on the SD card.
My next step is to try moving my files to a completely different MicroSD.
It might be a few days until I can get hold of one to try.
I have about 5GB free on my 16GB card.. I'm wondering if there's a limit to how much data sitting on a card that Gingerbread can take.
I have a rooted phone.
vinnielo said:
My Pro Plus has started doing the same since mid-April.
So far, I've tried removing some apps but nothing has been effective in locating the source of the problem.
Logcat hasn't given me much help.. fatal errors seem to happen with no single app/process.
It'll reboot probably a maximum of 4 times over.. once which gives no phone reception before settling.
So far, I've found that the phone behaves itself with the SD card removed.
I've tried reformatting the SD card before copying all my files back over to it.
I've tried rebuilding the Android folder on the SD card.
My next step is to try moving my files to a completely different MicroSD.
It might be a few days until I can get hold of one to try.
I have about 5GB free on my 16GB card.. I'm wondering if there's a limit to how much data sitting on a card that Gingerbread can take.
I have a rooted phone.
Click to expand...
Click to collapse
is not a way to solve my problem !
DarkDreamOff9 said:
is not a way to solve my problem !
Click to expand...
Click to collapse
press both the volume buttons when you see the triangle with question mark, that should get you into stock recovery
harishatrix said:
press both the volume buttons when you see the triangle with question mark, that should get you into stock recovery
Click to expand...
Click to collapse
vol + button not work ...
pelase help me
ive a died phone in evrery case