Related
So, when i turn on the phone, the G-sensor/Gyrator are working pretty well. But when i make a phone call or answer one there's something going on afterwards. When i open an application and rotate the phone to landscape, the app automatically is closed and i'm stuck to the home screen (when restarted everything is back to normal till the next call). This is really annoing when browsing the net. Any suggestions?
exseed said:
So, when i turn on the phone, the G-sensor/Gyrator are working pretty well. But when i make a phone call or answer one there's something going on afterwards. When i open an application and rotate the phone to landscape, the app automatically is closed and i'm stuck to the home screen (when restarted everything is back to normal till the next call). This is really annoing when browsing the net. Any suggestions?
Click to expand...
Click to collapse
do not use GSEN
I have experienced a similar problem with SMS. I currently have Gyrator installed.
When i open a SMS and rotate the phone to landscape and try to use the keyboard, the app automatically closes and i'm stuck in the home screen.
I don't experience any other problems with other apps, just SMS & Email
This is really starting to annoy me.
I have checked WIKI which quotes
Simple enough, you could disable all rotation, then just use the "Windows Title" provided by Gyrator and select SMS and email tab (or others apps you wanted to rotate), add event and enable, then go rock with your Landscape full qwerty when typing SMS and emails.
Click to expand...
Click to collapse
Can someone explain this a little for me?
exseed said:
So, when i turn on the phone, the G-sensor/Gyrator are working pretty well. But when i make a phone call or answer one there's something going on afterwards. When i open an application and rotate the phone to landscape, the app automatically is closed and i'm stuck to the home screen (when restarted everything is back to normal till the next call). This is really annoing when browsing the net. Any suggestions?
Click to expand...
Click to collapse
Hi,
I have exactly the same issue.
WWE HD device.
gyrator2
after reset everything back to normal....
I stopped using Gyrator because I also got infrequent problems which seemed to be caused by this.
I now use AEB Plus with double press on the OK button to rotate the screen. I personally find this the simple way to rotate as I don't often need the rotate.
I disabled all rotation in Gyrator.
Then I only enabled the rotation for sms/mms, mail, tomtom, and just a few others.
Set the polling rate to 2 seconds.
It works oke now, except for the incoming call problem.
Thanks for the infos, i tried reinstalling the gyrator, made a phone call and everything was normal.
exseed said:
Thanks for the infos, i tried reinstalling the gyrator, made a phone call and everything was normal.
Click to expand...
Click to collapse
Which version do you have installed for gyrator?
I have 2008.12.10.1
HI,
did some additional testing.
It seems not to occur after just one phone call.
I rebooted the device and everyhting was oke (with rotating).
I made a call
I recieved a call.
Still everything is oké.
Anyone else got something to add as a fact?
ikkezelf1 said:
Which version do you have installed for gyrator?
I have 2008.12.10.1
Click to expand...
Click to collapse
Mine is the same.
Exceed: You havn't found anything that could help us out here?
No, mate, it just happend after i reinstalled the app. I don't know how and why.
Don't know what I did, but havn't had the problem for almost a whole day now...
Will update when I know more details.
Solved;
It was the 'darklord' coloured icons top bar cab file that caused the rotate to loose its focus.
I removed it and it worked.
Pitty that I don't see the percentages of the battery live not anymore...
with regards.
Hi all,
The title pretty much sums up the question- is anyone aware of a phone dialer app that you can use with only the D-pad and without the use of the touchscreen? As you might have seen in my previous thread, my digitizer is shot, so until that arrives in the mail, if I'm not using MyMoblizer I'm limited to answering incoming calls or using my quick-contacts. I can get to the dialer cooked-in by hitting the green button, but the arrow buttons all cause the screen to change to either speed-dial or call history. If there's an alternate or replacement dialer where you can navigate the numbers and select them, that'd be great.
Thanks!
I am using the T-Mobile US version of the HD2.
Whenever I make a call the dialer screen stops responding to touch, that includes the entire screen, not only the dialer buttons (sometimes if I rub the button it will respond, but most of the times it won't).
If I press the home button during the call the screen starts responding to touch again, but if I go back to the dialing screen its stops working again.
If I end the call using the hard button the dialer screen starts responding to touch again.
I hard reset the phone and the problem disappeared and then after a few days started again.
The proximity sensor works fine during the call and turns off the screen if I place the phone next to my face and turns it on again if I move the phone away from my face.
Anyone has a fix for this problem?
i had the same problem with one of energy's roms, but with all the flashing and different cabs, i never isolated the problem.
flash and rom and install your cabs one by one?
do you have bsb tweaks installed by any chance?
Same problem here, HD2 T-mobile dialer not responding
Same exact problem here.
Using the US stock HD2 T-mobile ROM with HTC sense Today's plugin disable (using spb pocket plus, phone weaver and Pocket Breeze instead).
Once I initiate a call the screen stops responding.
I used Kaiser Tweaks to change the dialer to the "Windows Mobiel Dialer"... now, the screen works fine, but when dialing a number I can't see any of the contact information. Also, with windows mobile dialer the proximity sensor is not working, so my face keeps activating buttons on the phone now.
Need help here!!!
I have BSB installed.
Also have many other cab's installed, so can't tell when or which software caused this.
Also, when tried to enable HTC sense again... the phone crashes... tooke me another 2 hours of reset'ing untill I was able to disable Sense and revert to windows 6.1 today's screen.
Turn off the BsB Tweak "tap time". That causes this problem.
johncmolyneux said:
Turn off the BsB Tweak "tap time". That causes this problem.
Click to expand...
Click to collapse
IT WORKED!!!!!!!!!!
The HD2 dialer is working again
Thank you!
Any idea why the WM dialer is not showing the contacts?
The fix worked, but...
That fix worked, the problem is I like the tap delay setting. without it I launch programs by mistake almost all the time while scrolling.
I tried to play with the registry value the fix changes:
HKLM/System/GWE/Touch/Filter/Minimumtaptime
the initial value is 0, the tweak changes it to 30, I tried lowering the value all the way to 10 and still every time the dialer screen stops responding while talking on the phone. It works fine once the value is reset to 0.
Does anyone know how to change the tap delay and stop the problem from happening? The answer might be found if we know why does it only happen in the dialer screen? Maybe there is a registry value for the dialer that is causing a conflict.
Thank you johncmolyneux!!! Enabled this recently to see how it worked and noticed the dialer stop responding, searched the forums and found this. Thanks!
Works like a charm!!
thanks, been looking for that for a long time...
changed BsB tap settings to off, soft reset, and now the HD2 touch screen works again during a call, so I can use the speaker and dialpad
Thanks a lot, Worked like a charm for me! Strange thing to include that tweak in BsB though - maybe works for other models/ROMs..
Heartfelt thanks
I recently updated my stock ROM and encountered this problem. After searching the forums I found this solution. MANY THANKS Mr M!
I've searched and couldn't find an answer so here goes:
I bought 2 HD2s on release day. One had data connection problem and I returned it for a new one. The second has been fine, but I came to realize that the large "Missed Call" notification doesn't show up above the calendar. I'm not talking about the small indicator at the very top of the phone. I can't figure out if user error is the cause here (i.e. did I hit an option I didn't mean to?). Any ideas?
No one? This does seem to be a bizarre bug and I cant imagine it is truly a bug in the Sense stock TMOUS rom. I must have changed something about notifications settings somehow. Any thoughts?
Do you mean how on older phones with the older touch flo 3d like the Touch HD, have that Call History button which turns into 1 missed call if you have a missed call?
Then no its not meant to be there, they took it out (stupid yes). If you want it back, go the themes and apps section and download cookies home tab 1.7, you can add it there aswell a boatload of other features.
Oh! you mean this was an option from cookie? I have it installed on mine but not my wife's phone. I'll try this out!
And yes, what I meant was when you miss a call, a large notification gets popped in the middle of your screen right over the calendar. Thanks!
Hi guys.
I got a Treo Pro from work a couple of months back but I'm getting really frustrated by the ability to pocket dial.
Every time I pull the phone from my pocket it will have 112 tapped into it. I'm getting really annoyed because it's so easy to do and it happens every time.
Is there any way to disable the ability to do that? I only want the keypad to work once it's been unlocked.
Any ideas?
What has worked for me is a tiny app called 'HookMgr' (freeware).
Thanks for that. Hookmgr seems to have stopped the keypad being pressed - however, the messages, calendar and start menu buttons are still able to be pressed (though the screen locks automatically straight afterwards).
Any ideas for those?
Glad it helped. Just to point out, some app you had installed was causing the problem and hookmgr somehow solved it (in my case it was VAlert that was the culprit).
Re. start, msg, calendar buttons - the same happens on my Treo Pro. Actually, I don't find this a bad thing at all as I can quickly glance at upcoming appointments or new email without unlocking the device.
I have an unlocked evdo palm treo pro and suddenly the screen lock isn't working. going in to the keyguard settings isn't having any effect. the keyboard is locked, but all the quickbuttons (red, green, palm button, etc) aren't locking. what did I do to disable keyguard?
found the fix for the screen lock on the treo plus. just gotta go into settings and redo the screen alignment. found it over at the ppcgeeks forums