Related
Hello,
sometimes, in a "rough environment", I use my old Nokia 6110 instead of MDA2. Is there any way how to get the SMS messages received in the Nokia (and supposedly stored on the SIM) from the SIM to the MDA2 ?
Thanks a lot for an advice !!
Petr
Prague, Czech Rep.
i've never heard about phones being able to store sms's on the sim
pretty sure that all i've heard about use the phone for that
so if moving the sim from a phone which supposed to support it
and putting in another which also is suppsed to support it would prove if it does or dont
if only one brand of phones support it at all i doubt it's a feature which many people long too much for on the any other brand of phone or pda out there
Rudegar: SIMS normally come with space for up to 20 SMS messages.
Some phones will store them locally, the good-old-fashioned way is SIM based.
xvylp01: The only way that I know to transfer them is via a PC - Nokia
PC Suite to get them there and activesync back again. Of course, they
will then no longer be SMS messaes, but you should be able to save them
as notes, or similar, so that you can access them
Cheers,
Dave.
Hi. I am using the P3600 since February 07 and have noticed that sometimes callers are being forwarded to my voicemail directly without the phone ringing. I checked the service settings (diverts), and what I do have enabled is a divert to voicemail *if the phone is busy, unavailable or out of reach*.
I am using Pushmail / Activesync via UMTS and ask myself if the phone is dropping in a "busy" state while downloading new e-mail. If somebody would call exactly then, this could cause the divert to my voicemail.
Did anybody have a similar experience?
Thank you and best regards
Stefan
anfangs said:
Hi. I am using the P3600 since February 07 and have noticed that sometimes callers are being forwarded to my voicemail directly without the phone ringing. I checked the service settings (diverts), and what I do have enabled is a divert to voicemail *if the phone is busy, unavailable or out of reach*.
I am using Pushmail / Activesync via UMTS and ask myself if the phone is dropping in a "busy" state while downloading new e-mail. If somebody would call exactly then, this could cause the divert to my voicemail.
Did anybody have a similar experience?
Thank you and best regards
Stefan
Click to expand...
Click to collapse
Hi
On German Vodafone this happens if
a) HSDPA is enabled
b) you ar online with a data connection
c) you get a phone call then
I disabled HSDPA and the problem is gone.
which network do you use?
do you have HSDPA enabled?
I've had the same issue. I have Cingular/AT&T. They tried troubleshooting the phone, and ended up sending me a new one. Weeks later I find that I'm still having this problem. If you find out an answer let me know...
HSDPA in use
Hi - thank you for your reply. I am in Switzerland, and I use Swisscom as a provider. HSDPA is one of the option the phone goes for if no other is available. Is there a way to disallow the usage of HSDPA? Thanks and best regards, Stefan
anfangs said:
Hi - thank you for your reply. I am in Switzerland, and I use Swisscom as a provider. HSDPA is one of the option the phone goes for if no other is available. Is there a way to disallow the usage of HSDPA? Thanks and best regards, Stefan
Click to expand...
Click to collapse
Yes, there is. Try SK Tools. There is also a HTC Tool for this and http://www.fit4cat.de/portal.php has another tool. If you have problems finding one of these tools then send me a private message with your email adress.
Thank you - I will check tools out
Thank you very much - I will check those tools out!
Hi, guys!
I'm from Ukraine, and my operator doesn't have 3G yet, only GSM/EGPRS.
And I don't use voicemail but there is lighter service here. If somebody called me when I was unavailable, out of zone I would receive SMS from operator with callee's number and call time.
And after switching to P3600 I began to receive such SMSes 5-7 time per day even if I'm sitting in my office all the time and is available.
I've written e-mail to HTC support but haven't received answer yet
does not happen only with P3600
I switched my SIM-card to a Sony Ericsson P990i - and was stumbling into the same problem. Calls sometimes get forwarded directly to my Voicemail if data connection is active. It seems to me rather a provider than a device problem ... ! I will discuss this with Swisscom. Thanks for the hint.
Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
rdosti said:
The shift doesnt support phone calls...even if you have on sim card it wont ring
Use it for its gprs/edge/3g and sms sending n receiving
Click to expand...
Click to collapse
Hello
thats exactly what I like to use the shift for. I am not interested in making phone calls with it.
But the Shift is blocking calls, which should also arrive on my mobile phone...
I think HTC has made this blocking to avoid connection problems when somebody tries to calls the shift (which is not supported).
Is this right?
Might work?
I don't know for sure about T-Mobile. I am using a similar service (they call it "FlexiCard") from E-Plus. They have a function that allows you to designate one of your SIM cards as the primary card. This is the card that will receive calls (and SMS) first, only if this card is not active (phone turned off) or busy a call or SMS will be routed to the other card.
However, there seems to be a service difference between T-Mobile and E-Plus: I have the SIM card in my Shift still designated as the "primary" card. If the modem is turned on, this is interpreted by E-Plus as "busy", so calls go to my phone (which holds the "secondary" card). If the modem is turned off, the SIM card in my Shift is obviously inactive and not visible to the mobile network. So the only reason for me to switch "primary" vs. "secondary" would be to continue receiving SMS messages on my phone rather than the Shift. Unfortunately, for SMS E-Plus does not bother whether the "primary" card is active / busy or not, SMS always go to that card (understandable when you look at how SMS works on mobile networks).
If you don't find any information about switching primary/secondary card in your documentation that came with the card I suggest contacting the T-Mobile hotline. They should be able to tell you whether this functionality is available with your "MultiSIM" and how to switch "primary" between the cards.
Thank you mw65719 four your tip.
I just phoned with T-Mobile support.
They don't support it like Eplus to switch between SIMCards.
It is just possible to define a primary card for SMS service, not for phone calls. Whenever someone calls me both phones are ringing.
So I will have to buy a new contract with T-Mobile just for data transfer, which is more expensive than the combination of phone/data contract.
I have the same issue with the MultiSIM from t-mobile. Both phones (the other one is a Touch) are ringing, after the first ring a line-busy message is generated.
Seems that the Shift in canceling the incoming call after the first ring.
Does anyone has an idea to solve this problem instead of splitting the MultiSIM into two separate contracts?
Have just opened a suuport case at HTC Europe concering this issue. Seems to be a German (and t-mobile) specific problem.....
speech service ?!
gsiakoe said:
Seems that the Shift in canceling the incoming call after the first ring.
Click to expand...
Click to collapse
find out how the call canceled
a: is it the 3g modem that set the networkstatus to -> data service only
b: or a apllication that will call canceled - reason busy
see here what i mean
http://www.t-mobile.de/downloads/laptop/hyperterminalmulti-sim-anleitung.pdf
I think it's part of the WinMo/SnapVue side.
Vista enables a lan connection with WinMo for internet.
So there could be settings in the registry to enable/disable this busy status.
I try to find somethin, but unfortunately i'm not a pro like others here in the Board.
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
alexn2 said:
Where are you folks, on Planet Mars, everyone and all documents I read say that the Shift cannot support phone calls???????
Click to expand...
Click to collapse
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Idea how to activate phone pad
Pawel062 said:
it can be made to recieve them though. we all say Bengalboy's pics. about the phone calls being blocked. that does suck. i guess we have to wait till the phone side is re activated.
Click to expand...
Click to collapse
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Pawel062 said:
problem there is no phone pad aka dial pad in production models as far as i know. so even if u can re enable it u wont have any images etc... it'll most likely require a custom rom or if we get lucky a cab.
Click to expand...
Click to collapse
I am not interested in using the phone pad.
I like to solve the busy line problem (read some posts above). When activating the speech on modem side, this would be solve and I could use my Shift with my MultiSIM-Card
Irgendware said:
I had some phone calls with T-Mobile Business support and they told me a trick how to activate the phone function, but I dont get this to work.
What I have to do is the following:
1. Download and install a hyper terminal application on Windows mobile (I found http://www.cambridgevx.com (Server seems to be down at the moment))
2. Open a direct connection to the modem
3. Enter the following commands:
3a: AT_odo?
(this should show 1 which means speech is deactivated
3b: AT_odo=0
(speech is beeing activated)
4. Reset Windows Mobile and the phone should be activated
I was told this is known to work on some data modems and should work on the HTC Shift too.
But always I try setp 2 I get an error "cannot open data connection"
Has anyone an idea?
Click to expand...
Click to collapse
souds interesting ! .. have you try some scenarios ? with 3G enabled, with 3G disabled, with wifi enabled, with wifi disabled ... etc ?
I can't try myself.. but as there are data connection through 3G.. I think that it is possible to find a solution to the step 2 !
Anybody found a solution for this?
Getting my shift soon, and im going for a twin sim solution. would suck if i cant get phone calls on my kaiser cos the shift is on in snap vue mode and rejects the calls.
I am experiencing the same Problem with my Shift.
It is crazy, because my Mobile rings a halt time, then the Shift rejects the call. Afterwards, I have to call back.
The problem should be able to solve, but you have, anyhow, to tell the shifts modem not to reject voice calls. Still, I do not know how to tell the modem
Hello?
Has anyone resolved this issue? I'm a new MultiSIM user, and the idea of not having any internet with my shift is ****ing me off (that would make it as useful as a brick ).
Any resolution is appreciated.
Cheers.
HI @ all, i don´t know, if you fixed that problem.
I´m a multi SIm user too. With the original Radio Version (shipped with german SHIFT) the same problem. After that, i update the radio Version to the Phone edition radio Version:
see:
http://forum.xda-developers.com/showthread.php?t=486234
(but here always my WinCE Side was really slow??) so I Downgrade back the phone edition
1.27.35.28 and ce OS version 5.2.1620 (I00 ROm I think)
And now, Phone is working, and never the Multisim usage hangs up.
I don´t know why, i play every 1 month with Shift and upgrade, downgrade something, then the most time shift is not in use, so i don´t make a history what happend...
:-(
But with the new radio Version it will work.
maybe this rom work too:
Cmonex posted another radio for backup. This radio is for original rom (ie all other roms from the forum). Look for the link on page 5, or here
http://rapidshare.com/files/20211808...ift1582123.zip <- this is not for the phone or for this rom
Mirror: http://www.mediafire.com/?sharekey=7...e6ba49b5870170
Irgendware said:
Hello
Some days ago I received my HTC Shift and I am very satisfied!
Unfortunately there is one strange Problem:
I am using a MultiSIM by T-Mobile, that means I have one number for multiple devices.
If the HTC Shift would make phone calls and someone calls me, the shift and my MDA Vario III would be ringing.
When I activate the Modem in my Shift it seems the Shift receives phone calls and then denies them! So nobody can call me when I am using my shift, since all calls are directed to my mailbox
Has anyone of you an idea what can I do?
(btw: I unlocked my Shift already to full WM6 )
Click to expand...
Click to collapse
it happens with all multiple sims when you have all the devices activated!!!...
when you have multiple sims and you have all the devices open...
which device should accept the call ??
it does not work as douplex land line... not all of your mobile devices should ring at the same time ... obviously the one that was opened first and got the signal from your provider should get the line...
the twin sim solution works fine with me ... plus unlimited internet access from phone and the shift...
BUT one device open at a time ...
Hi,
This is my first post in here, hope you can help.
I have a problem making a voice call while my phone is data connected(3g,E,H), I live in UAE, tried to call the emirates GSM Provider "Etisalat" and after having a long discussion I found out that their system can't do voice while data connection is available because they can't calculate the SIM credits. I tried like 10 different ROMs on both my HTC TYTNII and HTC Touch HD but with no luck. My question is:
Is there a tweak or registry Edit (For my Blackstone) that can disable the data upon dialling and re-enable it after hanging up. I want my phone to stay connected in order to use push mail.
Thank you
No answer!! no help..
I just bought my htc HD2 and upgrader to official rom 1.62, i think, released from last january, then i had this bug for sending sms. i upgraded the radio, twice, 2 versions, no way,
used the official rom, then three roms of the best cookers her, thanks to them for all the work
But, no way to send the sms, i receive instead something from my operator telling that i'm using a bad adress, something like that.
I read all around the site, and this seems to affect just some users.
but from another side, someone with the same issue desactivated the sms function with shap's utility, and solved it.
i don't know what to do, please help, is this a hardware issue?
have you tried getting the settings resent from your network provider?
It's not the normal sms bug you have. You have a problem with the settings.
Contact your provider and ask for the sms settings.
Or visit the a shop that have this provider and the HD2 and ask for help.
Thanks for the replay.
When i started with the phone, with Orange france, i think i was able to send some messages. but then i updated to several roms to hope resolve the problem. i'm receiving areplay from the provider just after sending every sms saying 'your message can't be treated else you have no credit, or you use a destination non authorized!!!!"
i cheked the parameter for the server provider, it's ok. nothing wrong on this side. Really strange to buy a handset 550$ and to be without sms function, i regret really having sold the Iphone 3Gs, at least i could do the basic things.
As I wrote, it is NOT the sms bug that is making problems on your phone.
Because with the SMS bug, the SMS never left the phone.
If you get a message from the provider, then it is the provider making problems, not the phone.
So either the telephone nr is wrong, or the settings or some strange thing in the ROM when used with your provider.
I suggest you test with another SIM card. Borrow a SIM card from a friend to test. Test both with the same provider and a different provider just to find out. Also, if you post what provider you use, maybe someone here can help U with correct settings.
But I agree there have been to many bugs on this phone. I had much less problems with the Touch HD, but HD2 is so much faster that i prefer the HD2.
U should also contact your provider with this problem since they are making the problem.
You are right!
Here is what i did.
i have another sim card from another provider, i switched the two sim from the two phones, and when i use the new sim hd2 configure automatically the settings. then i send the message from the HD2 to other handset with the faulty sim-provider-config or whatever. the message is delivered in 2seconds! so definetely strange thing here.
I cheked the setting - number for sms server, it's ok. back with my principal sim on hd2, and again no way to send the sms. really strange!!!
thanks anyway for the good help. i appreciate