re:WAP Settings for LoopMobile - Touch GSM General

re:WAP Settings for LoopMobile
Hi Guyz I have an htc Touch P3450 and I want to connect the Internet through Loop Mobile WAP Services becoz Its free My friends r Having Nokia .Motorola ...etc & they r using these Services I desperately need some settings to Access this Service Plz Hlp me.And does Windows Mobile Support Wap

There is still wap support I guess, but technology moves and they called it GPRS.
General Packet Radio Service..
Start -> Settings -> Connections -> Connection Setup to config.
If there is anything others still wrong, please call your operator.

cephais3591 said:
Hi Guyz I have an htc Touch P3450 and I want to connect the Internet through Loop Mobile WAP Services becoz Its free My friends r Having Nokia .Motorola ...etc & they r using these Services I desperately need some settings to Access this Service Plz Hlp me.And does Windows Mobile Support Wap
Click to expand...
Click to collapse
loop mobile guys will tell u tht d windows mobile doesnt support wap ... thy dont knw n e thing
yes it did support wap
go to connection wizard (start > settings > connection > Connections )
1.click add new modem connection
-----------------------------------
name for connection : n e thing u like
select a modem : Cellular Line(GPRS).
click next
Access point name : mizone
click next
username : ur loop number
password : leave it blank (or ur loop number)
domain : leave it blank
click FINISH
NOW....
2.Click "Edit My Proxy Server"
under proxy settings TAB....
check both the boxes...
and under proxy server box add : 10.0.0.10
and click advanced button
under all four protocols HTTP , WAP , Secure WAP,Socks add following ip address with port no.
IP address :10.0.0.10
port no : 9401
click ok n u done......
now click on Manage existing connection
ur newly created connection will be there....
click and hold connection name...context menu will appear....click on connect
if it disconnects.....try few more times...it will get connected
and u can directly use opera mini ....(but for first time i will recommend above method...but after that u can directly start opera and it will use ur connection to connect to internet)

Wap settings Worked
@Bhavin
ur Gr8 man u help me save a lot of money thnx alot buddy.

i have saved this page will try it after this month.already paid for this month.wat to do.have to wait till dec 7th

@bhavin
ty brother ....

Related

Internet Over Bluetooth Network

Hi,
I have wrote this wiki document and I wish someone gets his device connected to the "rest of the world" over a bluetooth connection.
http://wiki.xda-developers.com/index.php?pagename=InternetOverBluetoothNetwork
FYI..
PS: Nice fiddling around..
Hi Subzero5
Great post , almost what I need .
I have the XDA11i and want to access the net via a blue tooth modem , which I plug directly into the wall socket . So far i have hit a big blank .
Any thoughts , can get the two devices linked but no further , cant get the XDA11i to tell the modem to dial ?
Regards
Astro1
XDA <-bluetooth-> Mac <-internet ???
Hi: Is there a possibility to share the internet to bluetooth with Mac OS X.4 ?
I tried the System Preferences, but there is no bluetooth-option!? How can i setup a such a bluetooth bridge?
$hred
if u have activesync...
file->connection settngs;
in the box "this computer is connected to" chek "the internet" and every time
u use activesync u are online...thats how i use it...
Nice text btw!
Vanja
Hi from a newbie. I've just bought the TyTn11 and would like to use bluetooth to access my laptop's internet connection. Part 1 of your instructions were easy enough to follow but part 2 confused the hell out of me - not least because I don't have a Network Cards icon from Start > Settings > Conections >. The TyTn is running WM6 if that's any help. Any pointers would be greatfully accepted
it's
Start > Settings > Conections > connections > adcanced > select network
pick the item in the dropdownbox which is not called something like my isp or such
usualy the 2th item
Thanks Rudegar, I'll give it a try.
Hi,
I'm trying to get Internet over bluetooth working on my TyTN with WM6.
I've got bluetooth network access point configured on my Linux PC so part 1 is done.
In part 2 I've successfuly configured IP and DNS for Bluetooth PAN driver but I can't find the option "Join a personal network" in my bluetooth settings.
Actually I'm stuck in part 2 point 6 as there is no <u>Bluetooth Manager</u> link under bluetooth settings.
Any advice?
imit4t0r said:
if u have activesync...
file->connection settngs;
in the box "this computer is connected to" chek "the internet" and every time
u use activesync u are online...thats how i use it...
Nice text btw!
Vanja
Click to expand...
Click to collapse
not works... for me :S
also i noticed that in "network connectins" appearing 'Local Area Connection 2'. i know i know it is my connected prophet.
so when i "allowing to use internet through my computer" on "Local Area Connection" , disappears connection with my prophet ! and when i do it on LOC2 disappears internet :S .
also tryed something like Rudegar said but there is :
"select a modem" (cellular line, cellular line(gprs) , generic IrDA , hayes compatible on com1 ) , tryed with com1 but it asks user / password / domain ...
i just dont know what to do, help...
How about two pocket pc's?
I'd like to connect my bluetooth-enabled e800 through my hx4700,but there's no "connection sharing" that I can enable.Is it enabled automatically?
thankx mate for info but i have htc p3300 Start > Settings > Conections > connections > adcanced > select networkit show only ( 1 my work network)(2 my ISP)which i should connect????
Hi,
I can't find out how to access this on a HTC Touch (Elf). Can someone please help?
Thanks
SubZero,
I not sure if you're instructions are correct.
From you wiki page-
Part 2: Setting Up Your HTC:
1. Go to Start > Settings > Conections > Network Cards. This option doesn't exist!
2. Tap the adapter named Bletooth PAN User Driver. You will now see IP Address tab selected in the Settings.
3. Select Use server-assigned IP Address.
Could someone who has done it on thier HTC diamond please check this?
Thank You
KOPRajs said:
In part 2 I've successfuly configured IP and DNS for Bluetooth PAN driver
Click to expand...
Click to collapse
Could you please explain how you did that!?
I'm on WM6 htc touch diamond.
Thanks so much.
for diamond you have to go settings/connections/Wi-fi/Network Cards tab
but after that the problem is part2 6/7.... there is no link named Bluetooth Manager....
let me know...
KOPRajs said:
Hi,
I've got bluetooth network access point configured on my Linux PC so part 1 is done.
Click to expand...
Click to collapse
Hello,
Could you tell me wich linux you use and how did you get your NAP working ?
Thanks
How can it be done on HTC HD
I can see that PAN is supported on thhe HD.
No network cards option under setting>connections
Please assist how to reach that PAN profile on my HTC HD
Thanks
same problem, doesn't work with htc diamond... if somebody has an idea, please post! thx a lot!!!
Well I think all comes from WM6 and above....
that su*ks ...
If anyone know a third party tool allowing to do this

Airtel Delhi MMS problem

Hi guys,
Is any wizard user in delhi (India) using airtel as service provider?
The problem i'm facing is that i'm not able to send/recieve MMS messages on my O2 mini s.
I've tried contacting airtel people and they just gave me the settings they have in their book, But after various efforts it's not working.
The GPRS and rest of the things like sms, mail etc are working fine.
Here are the settings they gave me
Server Name : Airtel MMS
Gateway : 100.1.201.172
Port : 9201
Server Address : http://100.1.201.171:10021/mmsc
Connect using : GPRS
If anyone is using some other settings or if there is something that i'm missing then please lemme know.
Regards
Vineet
vanny said:
Hi guys,
Is any wizard user in delhi (India) using airtel as service provider?
The problem i'm facing is that i'm not able to send/recieve MMS messages on my O2 mini s.
I've tried contacting airtel people and they just gave me the settings they have in their book, But after various efforts it's not working.
The GPRS and rest of the things like sms, mail etc are working fine.
Here are the settings they gave me
Server Name : Airtel MMS
Gateway : 100.1.201.172
Port : 9201
Server Address : http://100.1.201.171:10021/mmsc
Connect using : GPRS
If anyone is using some other settings or if there is something that i'm missing then please lemme know.
Regards
Vineet
Click to expand...
Click to collapse
Same problem once upon a time.
But I have found that I was able to sucessfully send an MMS at night. I mean very late night or early morning I should say. When I asked the helpdesk, they told me that I happen to be in a network congested area. But then she was kind enough to give a reset on my profile which took me out of the network for a couple of minutes. When I was latched again, viola !!! no problems !!
Try that.!
By the way, what speeds do you get ? I get an excellent speed in Mumbai on Airtel than on Orange. Orange sucks real bad these days.
Hi araje,
Thanks for the reply. I've tried the resetting thing also but it was of no use.
Anyway I've found out the solution to this problem. Actually the GPRS settings that we use, has got the problem. Here's what i did ...
I created a new GPRS connection with the name MMS ( Cellular line (GPRS)).
gave the access point as airtelmms.com
In the advanced tab use "server assigned IP address", and enable the box "Use Ip header compression".
Now comes the real part...... in the servers tab, use "specific server address" and specify DNS as 100.1.201.172 and press OK.
Now to use the MMS part u go to connection settings, connect using this new connection and u'll be able to send and recieve MMS with out any problems.
For browsing and all use the other (ur normal) GPRS connection.
Though switching between connections is a pain in the a** but as i don't use MMS too much, it's ok for once in a while.
Well, Airtel provides EDGE connection in delhi (that's what my phone indicates me :wink: ), but when i use it to download something on my pc it gives me a speed of 4-5 Kbps. Though it is not good to surf on pc (anyway i use broadband at home and work), but is good enough to work on my wizard.
Also i cannot complain about it coz i get it for 99 bucks a month ... so what else could u expect
Vineet
Hey Vineet,
Are you able to connect to Airtel Live ?
From the website here are the settings. I have been able to set some stuff but points 8,9,10-14 are tricky. I tried following your settings you used for mms but didnt help. Any idea how to set this ?
1 Connection Name: Airtel Live!
2 Data Bearer: GPRS
3 Access Point Name: airtelfun.com
4 Username: MSISDN e.g. 91982xx xxxxx
5 Prompt Password: No
6 Password: < blank >
7 Homepage: http://live.airtel.in
8 Connection Security: Off
9 Session Mode: Permanent
In case of the WAP 2.0 complaint phones, the following extra settings need to be done:
Under Options > Advanced Settings
10 Phone IP Address: Automatic
11 Primary name server: 0.0.0.0
12 Second. Name server: 0.0.0.0
13 Proxy server. address: 100.1.200.99
14 Proxy port number: 8080
hey what phone are you using??
i've mentioned the settings for wizard (O2 mini s), iguess others will also have similar settings.... try that and let me know...
I am using Qtek9100 with AKU rom.
The new connection I created was exactly on your lines.
vanny said:
I created a new GPRS connection with the name MMS ( Cellular line (GPRS)).
gave the access point as airtelmms.com
In the advanced tab use "server assigned IP address", and enable the box "Use Ip header compression".
Now comes the real part...... in the servers tab, use "specific server address" and specify DNS as 100.1.201.172 and press OK.
Click to expand...
Click to collapse
I set most of the stuff based on the way you created your connection. But how did you specify the port 9201. In my case I put the server ip mentioned in point13 in the DNS entry. But there isnt anyway to enter the port number.
Are you able to use the airtel live website ? Also one thing is that my Airtel mobile office works perfect since I dont have to enter any advance settings. Just the APN, and no userid/password. However, the airtel live website doesnt load with this connection. I use it mainly for laptop.
Thanks for your help in advance
Anup
Airtel Karnataka MMS settings
Those of us who have approached Airtel for help in configuring MMS on Windows Mobile devices know that their very competent customer service reps are blissfully unaware of the existence of Windows Mobile OS leave alone its variants like WM 5, WM 6 and 6.1. Ans when they direct one to their 'special GPRS helpdesk' the special GPRS guys haven't heard of anything newer than WM 5 because they attempt to walk one through the WM 5 UI.
Well to avoid calling Airtel, activate the MMS service on your account by sending a text message MMS ACTV to 222. Once the service is active, do not ask for MMS settings to be sent over the air as Windows Mobile doesn't accept OTA settings. Instead key-in the settings yourself:
MMS Settings for the Sony Ericssson X1i (Xperia)
Windows Mobile 6.1
1. Tap Start -> Settings
2. On the Settings screen tap on the Connections tab
3. Tap the Connections icon
4. Tap Manage Existing Connections
5. Tap on New to create a new data account
6. Type-in AirtelMMS or MMS under Enter a name for the connection
7. Choose Celular Line (GPRS, 3G) from the drop-down list under Select a modem
8. Tap Next
9. Type-in airtelmms.com under Acess point name
10. Tap Next
11. Leave the username, password and all other fields blank
12. Tap Finish
If there is more than one data connection configured on the Manage Existing Connections page, please ensure that the radio button beside Auto Pick is selected.
Tap OK to exit and tap OK once again to return to the main settings page.
Tap Start -> Messaging
Tap SMS \ MMS
Tap Menu -> MMS Options
Place a check mark beside the following:
• Save sent messages
• Allow delivery Report
• Allow Read report
Set the Retrieval mode to Auto
Set the Attempts before giving up to 3
Tap on Servers
Tap New
Under Server Name enter AirtelMMS or MMS
The Gateway should be set to 100.1.201.172
The Port number should be set to 8799
Enter http://100.1.201.171:10021/mmsc under server address
Under Connect Via, please choose the name of the data account created in step 6 above
Choose 100K as the send limit
And set the WAPVersion to WAP 2.0
Tap Done
Tap OK to return to SMS \ MMS
and bob's your uncle

MTNL - India, Gprs problem with settings

Hi..
I am trying to connect my HTC WM6.5 based phone to internet via gprs. I have a MTNL connection in Delhi. I have installed these settings.
Following Settings are under Modem settings. :
Connection name : MTNL GPRS
Access Point Name : gprsmtnldel
And Following settings under proxy -> wap proxy settings
Wap Server : 172.16.31.10
Port : 9201
Username : mtnl
Password : mtnl123
But cannot connect to the net. The phone tries for a while then shows "Could not connect due to unknown reasom"
Than I check for settings again, the password I entered had automatically changed to a 12 letter word.
Please help me configuring windows mobile.
try removing the proxy settings.
only use > manage existing connections > name should be mtnl
modem type cellular line
Access Pint name as per your service
username & password
that should help
go to coonection -->gprs authantication-->select mtnl connection name
and select authantication type as PAP
I'll tell you by tomorrow, I had it working successfully before my last hard reset.
Settings
Start-settings-connections-my isp-Select name-below select cellular gprs-apn...-username password - click finish then go to edit my proxy check boxes & click advanced tab enter ip in http & port number 8080 then wap enter ip port number as 9201 then click ok thats it Enjoy
Dear Ankush........were you able to get any settings? As I am still unable to .. and i have tried as other people have mentioned but nothing is of use ... Pls help if you have finally overcome this problem.
thanks....
ankush1492 said:
Hi..
I am trying to connect my HTC WM6.5 based phone to internet via gprs. I have a MTNL connection in Delhi. I have installed these settings.
Following Settings are under Modem settings. :
Connection name : MTNL GPRS
Access Point Name : gprsmtnldel
And Following settings under proxy -> wap proxy settings
Wap Server : 172.16.31.10
Port : 9201
Username : mtnl
Password : mtnl123
But cannot connect to the net. The phone tries for a while then shows "Could not connect due to unknown reasom"
Than I check for settings again, the password I entered had automatically changed to a 12 letter word.
Please help me configuring windows mobile.
Click to expand...
Click to collapse
still same even converted my number to 3g.....still my password converts into 12 letter string....wtf
y ont u let the fone do an automatic configuration?
i have a htc touch pro2 (wm 6.5) it sonfigures my airtel gprs automatically, & i even have an idea sim, so whn i remove my airtel n put idea in it,even tht it configures automatically,
by the way it wuld be better if mr ankush tell which wm device he uses & which rom he has installed
Hi Ankush,
Send me your mobile number and your Phone model number and I will send you the MTNL settings over the internet like the MTNL service centre would do. Send me this info in PM.
Kailash
mtnl mumbai 3G
hi guys
am in mumbai.. using mtnl 3G(prepaid) perfectly on my Touch HD.(energy rom)
the settings r simple.
here is the process.
1. go in settings/connections/connections (custom rom so some shortcuts might be different)
2. advanced tab.
select networks
both boxes select MTNL GPRS. if it doesnt show that in drop box then we first make those settings then u select. ok ok and out..
3. tasks tab
should show u MTNL GPRS.(if step 2 worked)
manage existing connections
general tab - name - MTNL GPRS
modem tab - MTNL GPRS -
name MTNL GPRS
modem - cellular line(GPRS, 3G)
next
access point name
gprsppsmum ----- this is for prepaid
gprsmtnlmum ----- this i guess is for postpaid.
next
usename - mtnl
password - mtnl123
finish
vpn tab ---- blank
proxy settings tab
tick mark -- this network connects to the internet
dont tick mark -- this network uses a proxy server to connect to the internet
so no proxy settings
soft reset and now try using the internet
it works like a charm.
this settings r for mumbai.
for delhi u can try apn as gprsppsdel or gprsmtnldel
hope this helps.
and yes.. MMS STILL DOESNT WORK. have tried all tricks but nothing. connects but after 98% it gives error. customer care is useless.
ankush1492 said:
still same even converted my number to 3g.....still my password converts into 12 letter string....wtf
Click to expand...
Click to collapse
dont worry about the password string. its normal
change apn
prepaid gprsppsdel or gprsppsmum
postpaid gprsmtnldel or gprsmtnlmum
no proxy settings.
hope this helps.
MTNL Delhi prepaid GPRS setting works on HD2 like Charm
ruzan said:
hi guys
am in mumbai.. using mtnl 3G(prepaid) perfectly on my Touch HD.(energy rom)
the settings r simple.
here is the process.
1. go in settings/connections/connections (custom rom so some shortcuts might be different)
2. advanced tab.
select networks
both boxes select MTNL GPRS. if it doesnt show that in drop box then we first make those settings then u select. ok ok and out..
3. tasks tab
should show u MTNL GPRS.(if step 2 worked)
manage existing connections
general tab - name - MTNL GPRS
modem tab - MTNL GPRS -
name MTNL GPRS
modem - cellular line(GPRS, 3G)
next
access point name
gprsppsmum ----- this is for prepaid
gprsmtnlmum ----- this i guess is for postpaid.
next
usename - mtnl
password - mtnl123
finish
vpn tab ---- blank
proxy settings tab
tick mark -- this network connects to the internet
dont tick mark -- this network uses a proxy server to connect to the internet
so no proxy settings
soft reset and now try using the internet
it works like a charm.
this settings r for mumbai.
for delhi u can try apn as gprsppsdel or gprsmtnldel
hope this helps.
and yes.. MMS STILL DOESNT WORK. have tried all tricks but nothing. connects but after 98% it gives error. customer care is useless.
Click to expand...
Click to collapse
Finally, my toiling ends with this setting given above. Thanks you so much!!! I have been trying one setting after another but it never works until I stumbled upon this thread and tried on
for Delhi prepaid user (trump), for apn, enter gprsppsdel
The rest follow the instruction given by this charming person!
Excelllent!!!!!!!!!!!!and great!!!!!!!!!!!
mkamodang said:
Finally, my toiling ends with this setting given above. Thanks you so much!!! I have been trying one setting after another but it never works until I stumbled upon this thread and tried on
for Delhi prepaid user (trump), for apn, enter gprsppsdel
The rest follow the instruction given by this charming person!
Excelllent!!!!!!!!!!!!and great!!!!!!!!!!!
Click to expand...
Click to collapse
u welcome...
i went mad myself when i first started out with mtnl. cust care sucks big time..
when saw that people were searching for settings and since mine was working perfectly..
posted it.
ruzan said:
hi guys
am in mumbai.. using mtnl 3G(prepaid) perfectly on my Touch HD.(energy rom)
the settings r simple.
here is the process.
1. go in settings/connections/connections (custom rom so some shortcuts might be different)
2. advanced tab.
select networks
both boxes select MTNL GPRS. if it doesnt show that in drop box then we first make those settings then u select. ok ok and out..
3. tasks tab
should show u MTNL GPRS.(if step 2 worked)
manage existing connections
general tab - name - MTNL GPRS
modem tab - MTNL GPRS -
name MTNL GPRS
modem - cellular line(GPRS, 3G)
next
access point name
gprsppsmum ----- this is for prepaid
gprsmtnlmum ----- this i guess is for postpaid.
next
usename - mtnl
password - mtnl123
finish
vpn tab ---- blank
proxy settings tab
tick mark -- this network connects to the internet
dont tick mark -- this network uses a proxy server to connect to the internet
so no proxy settings
soft reset and now try using the internet
it works like a charm.
this settings r for mumbai.
for delhi u can try apn as gprsppsdel or gprsmtnldel
hope this helps.
and yes.. MMS STILL DOESNT WORK. have tried all tricks but nothing. connects but after 98% it gives error. customer care is useless.
Click to expand...
Click to collapse
Hi, Thanks alot for the setting you provided! I did the setting for delhi mtnl prepaid and it works like a charm I followed exactly as you mentioned and changed mum to del and used (gprsppsdel) not (gprsmtnldel)..
But there is no 3G connectivity. In the cellular network (on my HTC HD2), I could find only MTNL GPRS (there is no option to choose 3g). Anyways, I am atleast happy with the gprs connectivity as I can update my mail box and weather report. Thanks alot....
Hi Ruzan, you should make your setting available outside this forum (I dont know how...) but I see lots of people desperately looking for it....Day before yesterday I changed flashed my rom, and I google search for two days, and finally I stumbled upon your setting today and to my surprise, it was your post that help me earlier too...Thanks again
mkamodang said:
Hi, Thanks alot for the setting you provided! I did the setting for delhi mtnl prepaid and it works like a charm I followed exactly as you mentioned and changed mum to del and used (gprsppsdel) not (gprsmtnldel)..
But there is no 3G connectivity. In the cellular network (on my HTC HD2), I could find only MTNL GPRS (there is no option to choose 3g). Anyways, I am atleast happy with the gprs connectivity as I can update my mail box and weather report. Thanks alot....
Click to expand...
Click to collapse
U welcome.
which Rom did u flash? on Energy's Rom to select 3G, go to comm manager/3G or network and select WCDMA. thats 3G network. if u r getting H or 3G on task bar u r connected to 3G network.
enjoy.
ALL MTNL APN are changed to mtnl.net
That means post paid and prepaid or Mumbai or Delhi has one APN that is mtnl.net
---------- Post added at 10:46 AM ---------- Previous post was at 10:46 AM ----------
ALL MTNL APN are changed to mtnl.net
That means post paid and prepaid or Mumbai or Delhi has one APN that is mtnl.net

Tmobile data connections problems

HI im kind of noob on phones , i did something to my HD2 i delete the Tmobile data on the settings and now i dont have data at all no 3g no email , lol , just 4 bars With something looking like the antenna ( Y ) but close on top lol sorry , when i try were say add a new modem connection goes to another screen were say enter name for connection I try to write what my wife phones say "T-Mobile Data and select a modem " celular line (GPRS) then click next and a screen say a connection already exist with that name . But i can't find it . don't know were to looks . On Network management say progrms that automatically connect to the internet should connect using :is on "T-Mobile Data " when i click on edit the next screen is blank is no connection to tap and hold for more options ... I dont know what to do . Can somebody help me here .. thanks . sorry about english .
Don't know the exact setting right now, but if you hard reset your device you default connection settings will come back
go to all settings -> system -> clear storage
make sure to back up anything important thats in phone storage, th micro SD wont be touched.
Thanks
How u doing the back up ? thru the sync software on the pc ? what about ringtones , wallpapers, games all that is going to be backup too .
try going to settings tab, then click on wireless controls.... in wireless controls make sure that your data connection is set to the on position, as well as your push service if you are using it on your email.
If that does not work then i can try to walk you through setting up data on your phone again....
click on comm manager ok i see data connection I click on and take me to another screen thats say connections : T mobile data , add a new modem connection , set up my proxy server .
my work network add a new modem , add a new VPN server .... , set up proxy server .....
MIKELOVESPB said:
click on comm manager ok i see data connection I click on and take me to another screen thats say connections : T mobile data , add a new modem connection , set up my proxy server .
my work network add a new modem , add a new VPN server .... , set up proxy server .....
Click to expand...
Click to collapse
where you just clicked that, is the little switch in the "on" position? Click just the switch part on the far rigtht side, not in the middle of the bar...that will flip the switch on and off
Same thing happen , goes to the other screen, the one i say before .
Well i guess i have to go with hard reset , seems that nobody knows about my problem , thanks anyways , .. now how i do a (full back up) .., with microsoft my phone , SPB back up , PIM backup v2.8 , Sprite , wich one is better for a FULL backup. ( I just saw that some of those softwre are not free ) can somebody leadme to a free one , thanks
US T-mobile data settings
Name for Connection:
T-Mobile Internet
Access point name:
epc.tmobile.com
User name:
your tel. number
Password:
i used my t-mobile website password (worked)
Domain:
leave blank
I am using spb backup. My recomendation- just pay for it- it's worth it. You dont want to lose all your info. And you may (probably will) have to do a hard reset one day anyway.
TIP: Save a couple of copies of your backups (non-synced folder)- two of my backup files were corrupted and didnt work when I restored the device. Had to go back a couple of days to an older file.
Good luck!

[Q] wap settings (Loop/BPL mobile ) for HTC Wildfire

hi,
pls help me with wap settings (Loop/BPL mobile ) for HTC Wildfire(android).
although wap works on my nokia, doesnt do so in wildfire.
when contacted tech support-BPL/Loop,the said that 'Loop wap' is incompatible with wildfire. must choose a gprs plan(read- a more costlier plan).
after reading other posts, found tech support is poor for windows/android.
pls advise.
deepesh_a said:
hi,
pls help me with wap settings (Loop/BPL mobile ) for HTC Wildfire(android).
although wap works on my nokia, doesnt do so in wildfire.
when contacted tech support-BPL/Loop,the said that 'Loop wap' is incompatible with wildfire. must choose a gprs plan(read- a more costlier plan).
after reading other posts, found tech support is poor for windows/android.
pls advise.
Click to expand...
Click to collapse
go to connection wizard (start > settings > connection > Connections )
1.click add new modem connection
-----------------------------------
name for connection : n e thing u like
select a modem : Cellular Line(GPRS).
click next
Access point name : mizone
click next
username : ur loop number
password : leave it blank (or ur loop number)
domain : leave it blank
click FINISH
NOW....
2.Click "Edit My Proxy Server"
under proxy settings TAB....
check both the boxes...
and under proxy server box add : 10.0.0.10
and click advanced button
under all four protocols HTTP , WAP , Secure WAP,Socks add following ip address with port no.
IP address :10.0.0.10
port no : 9401
click ok n u done......
now click on Manage existing connection
ur newly created connection will be there....
click and hold connection name...context menu will appear....click on connect
if it disconnects.....try few more times...it will get connected

Categories

Resources