Hello....
I am sure there are posts on this board for this topic, but yet everything I seem to search for does not find it. I apologize if there is a post and I have missed it!!
Does anyone know how to make the screen turn off when you are on a call? I just cannot seem to find this function. I can easily do this on the Tilt, but for some reason I cannot figure it out on the Wizard. My wife keeps hitting the End Call button on the dialer she uses with her chin and keeps hanging up on people.
Thanks for any help you can provide!
Eric
Not one person can help me out??
I know someone out there knows how to have the screen turn off after 30 seconds or something like that while on a phone call. It just has to be an option that I am overlooking.
ahhh,
i really want this feature too
While on the phone just press the power button again on the top of the phone, the screen turns off and the call continues until either party hang up.
Is that what you mean?
I just remembered I posted this a while back as my wife was asking me again.
dav3ywrx - thanks for the tip... can't believe I never thought of that!!! I will try it out tonight.
Thanks again.
No problem, good luck
Hi guys.
I have this strange problem.
If I dont use my phone for a while and I go to use it it the screen sometimes doesnt come on. The buttons light up but that is all.
i have tried to call it when that happens and I can hear a ringtone but the phone itself doesnt ring. The only solution is to pull the battery out.
When I switch it back on the call I made to the phone doesnt appear on the call history as a missed call either.
I am using energy rom
Anyone got any ideas?
salv90 said:
Hi guys.
I have this strange problem.
If I dont use my phone for a while and I go to use it it the screen sometimes doesnt come on. The buttons light up but that is all.
i have tried to call it when that happens and I can hear a ringtone but the phone itself doesnt ring. The only solution is to pull the battery out.
When I switch it back on the call I made to the phone doesnt appear on the call history as a missed call either.
I am using energy rom
Anyone got any ideas?
Click to expand...
Click to collapse
mine done that, i always use the call button rather then the hang up to wake it up, not had a problem since, hope it helps!
Nice to know I am not alone.
Just been looking at miri's latest rom and apparently he has put a fix in for some people whose phone didnt wake up, so am flashing phone now to see how it goes
Just as an update, been three days since I reflashed with miri rom and no problems.
so I just noticed the lights for my hardware buttons are stuck on, happens from the moment the phone turns on, and nothing changes it (though they seem to dim slightly) I've tried reflashing the phone (using mdj cyanogen 2.7, nand with magldr 1.12)
I tried searching and havent seen anything like this. Only thing I can think is maybe it got a little wet(?) while I was recording video during a snow storm here, but nothing else seemed wrong, just got home and noticed it. Any ideas?
I have the exact same problem. I've flashed back to the original windows mobile rom and the problem is still there! I've searched and yet to find the solution. Anyone got any ideas?
Check to see if you have a voicemail - you may have read it but closed VM before listening to all the message, it can on occasions do this - it I'm right just ring your phone leave a fresh VM then go into VM and listen to the whole message
Thanks for the reply, but no dice on this one. I tried the voicemail thing and I have no voicemails.
To clarify it's the bottom 5 buttons (call, home, windows, back and power) that are constantly lit up. Even when the phone goes on standby those buttons stay lit. I'm looking to see if there's an app that can just shut them off.
I got the same problem. My hd2 got some water on it and the problem started. The hardware keys now getting dim but not getting completely off. There is no other problem
Please help.
same problem on my father htc click
Ok guys try the bottom of post 4 here:
http://forum.xda-developers.com/showthread.php?t=926507
I use that rom (the 1.7) version and the fix works
johnerz said:
Ok guys try the bottom of post 4 here:
http://forum.xda-developers.com/showthread.php?t=926507
I use that rom (the 1.7) version and the fix works
Click to expand...
Click to collapse
Thanks, I will try the rom.
But do u really think its a rom problem ? The keys light were working fine before the water hazard in the same existing rom. Besides the problem is also there when u are in the boot menu of MAGLDR or Clockwork menu.
any updates from anyone? On miy HD2 the vol up, start, back & end call key don't respond to any presses but seem to be active. Calls will randomly end, vol up acts as if the button is kept pressed!
Help!
Hi guys,
A little bump in this thread, but is there already found a solution for this problem?
After a hard reset and replacing the digitizer of my htc HD2, the buttonlights remain on. Even when the phone gets in standby mode.
I'm using cyanogenmod 7. (bought it like this. Didn't put android on it myself)
After the hard reset and digitizer replacement there also came another problem.
When pushing the windows logo (key 158) the volume up button also reacts (key 115). Thesame problem occurs when pushing the dial button. With that key (231), key 114 (volume down) reacts.
So when i want to open a menu or make a call the volume goes up or down.
Do you guys think I screwed something up when replacing my digitizer or is it just an software issue caused by the hard reset?
All right guys, it was an hardware failure.
I reopened my htc and checked all the connectors and (re)placed some of the yellow tape. After the reassembly, my phone just works as it should. All problems are solved.
My HTC HD2 also got the keys stuck after only a week of use. T-Mobile is sending me a replacement phone today.
Is this a common problem? I'm afraid it may happen again.
Hey guys I'm having same issue. Going to try opening up and check connectors.
On some rare occasion, when I turn on my phone the touch screen works and it let me unlock the phone but every time I get into the home screen the touch screen stops working. When I press the home screen the home button the touch screen works again. Then I turn the phone off and on again same thing happen. Restart and it works back normally. Is this a software issue with kitkat or is this a hardware problem? I am on stock rom. I hope someone know the answer to this weirdness or maybe I don't know something. Thanks.
hfl12 said:
On some rare occasion, when I turn on my phone the touch screen works and it let me unlock the phone but every time I get into the home screen the touch screen stops working. When I press the home screen the home button the touch screen works again. Then I turn the phone off and on again same thing happen. Restart and it works back normally. Is this a software issue with kitkat or is this a hardware problem? I am on stock rom. I hope someone know the answer to this weirdness or maybe I don't know something. Thanks.
Click to expand...
Click to collapse
i get the same thing once in awhile. ever since KitKat. and i'm on a custom ROM to me its almost as if the phone is in some kind of wait state and i have to "kick" it to get it going. I've seen other in my ROM's forum talk of it. so now i know its not just our custom ROM, sounds like a KitKat thing..
Thanks. "Wait state" reminds me of finite state machine. Glad this isn't a hardware issue.
Is there any way to disable second screen buttons either through sensors (showing that your cheek is on the phone) or just during phone calls? I did a search of the forums so I apologize if this has come up but it seems I'm the only one having these issues. Please help!
I had similar issues with my last phone, but it wasn't through the second screen, my cheek would be dialing people during calls. I would prefer not to get rid of a phone over an issue that has an easy solution!
Thank you!