Hey guys my ex-Orange is on Virgin AU these days, using it as a tethered modem but I need to lock down to 900 as the Opyus/Virgin 2100mhz 3G spectrum is saturated in Melbourne to hell with all these 2100mhz devices over the last few years, any idea where I can get an application to lock to 900mhz 3G ?
Im using the HK rom a kind XDA'er uloaded for us
Under "Start\Settings\Personal\Phone\Band" (translated from German) you can preselect some frequencies.
thats the problem ! the only option is 2100/900 mhz together, nothing else under 3G
try....
On my rom I have two things to change on that page:
Networktyp: There I'm able to decide GSM or WCDMA
GSM should help you with your problem.
Band: There I can select the frequencies, but as you mention, there are always a UMTS band included.
Good luck and regards from AUSTRIA.
Stefan
Related
Gents,
I have been following this forum for about 9 months now; it is a great place to visit if one has an XDA – which I do.
I have one question, I upgraded my Qtek1010 to rom ver: 4.00.21 ENG (from yorch.net), it gives an option to select band 900 (Europe) or 1900 (North America). Does 900 really mean 900 or does represent 900/1800 (Europe), i.e. can my mobile still hand over call to cells on 1800MHz in Saudi or is it limited to the 900MHz band as a result of this upgrade?
Thanks for your help
it should be 900/1800 i think
i seem to recall that EU were at first 900
and asia were 1800
and us were 1900
then dual bandphones came and
you could get
900/1800
and
900/1900
not sure about 1800/1900
so it should work on both 900 and 1800 because the phone is dual
I dont think the upgrade changes the hardware capability, the phone will be 900/1800 or 900/1900, the latter can only be used in UK/europe on the 900 band, the 1800 is not achievable as far as I know.
yes 900,hz means 900 only which means if you have been into the band tab in the phone options your device will now be stuck at 900mhz only meaing you have lost the 1800band.....
and 1900 wont work it wil lcause your phone to freeze/no signal.
what you should do is go into your bootloader and achange it to 900/1800 and do not touch the band tab again becuase if you do you will have to select either 900 or 1900
this is because you are using an american rom.....
use v4.00.05 or v4.00.11 they are english roms with 1800/900
Hi ...
The siginifact point is the device h/w type ... is it PW10A1 or PW10B ?? ... refer to the sticker on the rear side of the XDA.
In case it's A then it supports only 900/1800 and the 900 option will mean 900/1800 and the GSM menu should be adjusted to the right band ... if it's B then it's 900/1900 and you can only use the 900 MHz band of your network coz the H/W doesn't support 1800 MHz
Either the GSM menu or the Band tab has no effect if the H/W doesn't support 1800 MHz
Folks,
Thanks for your help, I guess until I downgrade to 4.00.11 ENG I will use the bootloader to set it to 900/1800 and stay away from the band tab.
Thanks again
you can use any version you want mate but if using an american rom like what i am at the mo (v4.01.00) just dont click on the band tab under the phone options as once you do theres no way to close that screen without select either 900 or 1900
if you do select either band just go into the bootloader and put it on 900/1800 again and dont touch the band tab that way you will still have your 1800 mhz band too
gaz
soft reset will solve the problem :lol:
lol yeah that also but why not try avoiding the band tab once and for all lol that way you wont have to reset the bootloader bit or reset it if you go into the tab lol
gazzaman2k,
You recommanded using 4.00.05 or 4.00.11, I found 4.00.05 in yorch.net, do you know were I can get 4.00.11? I'm assuming it is a better rom!
Thanks for your help
searche the forum for it mate youll find it v4.00.11 uncooked
The only place for 4.00.11 was Jiff kitchen but it's down now
The ROM part of TMO 4.01.00 is not bad at all ... I have it since 2 months now and it's so stable ... didn't try it with SD cards tho
you may consider this upgrade ... again, the ROM part only
I am planning on going to a GSM 1800 country soon but I only have GSM 900 & 1900 (what i'm on now) listed as choices. Is that because of my current SIM card or is there a problem with my phone?
Thanks,
Daniel
Here a file to enable the band selection.
How do I run this?
It worked-
Thanks!!
I go to the States in August. Work the Magician in the USA ?
Thanks
Depends but most probably:
If you are going to be roaming with your current SIM card then find out which network you will be roaming on- if it's T-Mobile you will be fine because all the Magicians can work on he 1900mhz band- which T-mobile is. Cingular/ATT mostly is 1900mhz also but some rural areas operate on the 850mhz band- either way you should be fine, but find out who's service you will be on to be sure.
-Daniel
Thanks !
I use Proximus from belgium.
by the way, how u know gsm 1800 band missing? how u check it?
in the phone: Tools | Options and the tab Band is missing.
I have the band option, but I can only choose:
GSM 900 (europe)
GSM 1900 (North America)
Even after running the program in the second post.
Jackalope said:
Here a file to enable the band selection.
Click to expand...
Click to collapse
Thx lots ! You made my day.
Cheers
Hans
hrb said:
Jackalope said:
Here a file to enable the band selection.
Click to expand...
Click to collapse
Thx lots ! You made my day.
Cheers
Hans
Click to expand...
Click to collapse
Can you choose 3 bands?
900; 1800; and 1900?
how to run file?
Hi,
was wondering how you run the actual file.
thanks
Con
Can you choose 3 bands?
900; 1800; and 1900?[/quote]
Yes, I can
no, don't have option
cong
This is the screen I am getting.
I only get
Phone, Services, Network, More
that's why I need to know how to run the program so I can get this extra
BAND option.
cheers
Con
im having same problem as cong... helpp pleeaasseee!!!
Hrb, what kind of Magician do you have?
I'm talking about a T-Mobile MDA Compact with a standard Rom WWE 1.10
And as told: I do have the Band Tab, but I can only select:
GSM 900 (Europe)
GSM 1900 (North America)
And Cong and Castiwo, have you ran the program and softreset the Magician?
I don't know how to run the program, that is the problem
Cong
I bought an European Optimus 7 and it shows on the box "WCDMA 900/1900/2100, GSM850/900/1800/1900"
There's any way to put this phone to work on 3G WCDMA 850 networks at full speed?
Thanks
I own a Telus version of Optimus 7. My phone has the 900 3G band on it. I will tell you how to check whether your modem supports 850 or not. First, you open up the dialer and enter ##634#. This will install the MFG app, that will be accessible through your app list. The password that it asks is 277634#*#. Now you have access to the manufacturer test/setting menu. Proceed to the Engineer Menu, and then Modem Setting, followed by Band setting. There, you should see all the bands that are available, and WCMDA basically means UTMS or 3G. If you have the 850 band, it should be available in this menu. There are two other things you need to do before gaining access to this band, if available. But in order for me to continue, I need to know which carrier you plan to use this phone on. I am going to assume you want to use this in North America and you have already unlocked it. Let me know, and I shall help you further on making your phone functional for a 3G connection. BTW, I am typing this on my Optimus 7...the keyboard is seriously great, and if it wasn't for the loose buttons, I would have absolutely no regret over my purchase.
Thanks.
I saw here, there are these options available:
1.Automatic
2.WCDMA Only
3.GSM Only
4.WCDMA 850
5.WCDMA 1900
6.WCDMA 2100
7.GSM 850
8.GSM 900
9.GSM 1800
10.GSM 1900
11.WCDMA 900
Sorry for picking up this old thread again but there is no final answer on this.
The point is that I'm having the same problem, I have a european E900 and I can see the WCDMA 850 in the MFG settings. So is this working?
I'm going to Thailand next week and wanted to use True Move 3G which is on 850 Mhz.
Ok, just for the record - I am in Thailand now and the 850Mhz 3G Network from True Move is not working on the European E900.
Hope this helps for those who were looking for this answer.
HI Guys,
did a bit of a search, but couldn't come up with too much. I;'m in australia, and have a mate who imported a UMTS 900 DVP. He now wants to change operators to Telstra.
Their "Next G" network is 850. Is there any way to hack it, or even flash with an 850 UMTS version of the ROM?
Cheers
Mike
Nope.
10char
Hi all,
I am desperately looking for a solution to the above problem.
Background: I moved about a year ago from Germany to Canada. My HD2 worked well with the sim card from Telefonica/O2 on the network over here. The phone itself is not locked but branded. Anyway when I tried to change to a Bell sim card it did not want to work. So I looked up the frequencies. My HD2 works on the following frequencies:
GSM1800
GSM1900
GSM850
GSM900
W-CDMA(UMTS)
The providers over here have the following frequencies:
Telus (including Koodo)
2G
CDMA 850/1900
EVDO 850/1900
3G (and fake 4G)
HSDPA 850/1900
HSPA+ 850/1900
UMTS 850/1900
WCDMA 850/1900
1x EV-DO CDMA2000
Bell (including Virgin Mobile, PC Mobility)
2G
CDMA 850/1900
EVDO 850/1900
3G (and fake 4G)
HSDPA 850/1900
HSPA+ 850/1900
UMTS 850/1900
WCDMA 850/1900
1x EV-DO CDMA2000
Rogers (including Fido, Petro-Canada Mobility)
2G
GSM 850/1900
GPRS 850/1900
EDGE 850/1900
3G (and fake 4G)
HSDPA 850/1900
HSPA+ 850/1900
UMTS 850/1900
WCDMA 850/1900
I thought at least that with the frequencies like CDMA and GMS matching I could use any provider that works with these frequencies. Obviously I was wrong there Anyway I want to use the phone. Can anyone out there help me and get me the information which provider would work with the phone? I would use anyone as long as I can just use my HD2 again.
Thanks so much for any kind of help.
realShadow
EU HD2 will work on gsm in Canada but looks like will not match 3G wcdma used in Canada.
I used my EU HD2 in Canada on Rogers for a week & was fine on gsm.
Do check in phone settings to see bands are set to auto or gsm only, if set to wcdma only then will not connect to anything.
Not much you can do on 3G issue as hardware & not changeable, the australian Telstra HD2 & USA T-Mobile Hd2 is more compatible as hardware supports the 850,1900 & 2100 wcdma bands ....
Mister B said:
EU HD2 will work on gsm in Canada but looks like will not match 3G wcdma used in Canada.
I used my EU HD2 in Canada on Rogers for a week & was fine on gsm.
Do check in phone settings to see bands are set to auto or gsm only, if set to wcdma only then will not connect to anything.
Not much you can do on 3G issue as hardware & not changeable, the australian Telstra HD2 & USA T-Mobile Hd2 is more compatible as hardware supports the 850,1900 & 2100 wcdma bands ....
Click to expand...
Click to collapse
Thanks Mister B
I was with my German sim card also on Rogers. I just did not know if the phone would also be able to handle the local sim card. I will try Petro Canada or Fido. Rogers is a little expensive. Anyway thanks. Gives me hope
realshadow
Mister B said:
EU HD2 will work on gsm in Canada but looks like will not match 3G wcdma used in Canada.
I used my EU HD2 in Canada on Rogers for a week & was fine on gsm.
Do check in phone settings to see bands are set to auto or gsm only, if set to wcdma only then will not connect to anything.
Not much you can do on 3G issue as hardware & not changeable, the australian Telstra HD2 & USA T-Mobile Hd2 is more compatible as hardware supports the 850,1900 & 2100 wcdma bands ....
Click to expand...
Click to collapse
Hey all,
I just wanted to give a feedback on my recent experience. I yesterday checked at a Fido shop and I can confirm that it works. I now can use my HD2 again :good::victory::victory::victory::good:
I will get a sim card next weekend and then will see how to update my phone to something more current.
Thanks again for the tip Mister B
realShadow