Looking for OPAL MFG bootloader... - Touch Viva, MDA Basic ROM Development

Greetings,
ANyone have HTC Opal MFG SPL (bootloader) ? Or some Test Rom ? Need it for some development.
Thank you for answering

One of the attachments on the hardspl post is the stock spl.

XirXes said:
One of the attachments on the hardspl post is the stock spl.
Click to expand...
Click to collapse
Thanks, but Im looking for MFG SPL

Related

Hard SPL / SPL 3.13 (flashing ?)

I successfully downloaded and flashed WM 6.1 ... so far so good. I noticed that it also installed an new SPL (now 3.13, previously 1.28).
If I change to HardSPL (in order to use a custom ROM), do I need to flash SPL 3.13 before I revert to WM 6.1 (in case of a service call) ? And if so, is it available separately and where ?
Thanks,
Andreas
hi,
you can flash Shipped ROM without HardSPL AFAIK, but I think for service reasons you should use the original SPL.
Check out this two threads for Shipped ROMs and Original SPL:
http://forum.xda-developers.com/showthread.php?t=431738
First and second post:
http://forum.xda-developers.com/showpost.php?p=2075574
and PLEASE, next time use search and read the "sticky" threads, most of the things you have to know is in there.
regards,
Martin
Hi Martin,
thanks for the links ...
I agree that searching is helpful, no question about that ... BUT
I had already downloaded the GER WM6.1 update and installed it (from the page you linked to) and
I had searched for original SPLs but found only 1.25 or 1.28 ... not the 3.13 I currently see in my TC (after WM 6.1 update).
So the question for me still is this:
If - after going for a custom ROM (incl. HardSPL) - I want to go back to the standard HTC WM 6.1 ROM, will I need to change back to the standard SPL first ... and if yes, which one ? Will it be 1.28, since I haven't seen a SPL-file for 3.13. ?
Sorry, if I overlooked something in the other posts/threads, but this is not clear to me ... if it's obvious to everyone else, then mea culpa.
Cheers,
Andreas
acocq said:
Hi Martin,
thanks for the links ...
I agree that searching is helpful, no question about that ... BUT
I had already downloaded the GER WM6.1 update and installed it (from the page you linked to) and
I had searched for original SPLs but found only 1.25 or 1.28 ... not the 3.13 I currently see in my TC (after WM 6.1 update).
So the question for me still is this:
If - after going for a custom ROM (incl. HardSPL) - I want to go back to the standard HTC WM 6.1 ROM, will I need to change back to the standard SPL first ... and if yes, which one ? Will it be 1.28, since I haven't seen a SPL-file for 3.13. ?
Sorry, if I overlooked something in the other posts/threads, but this is not clear to me ... if it's obvious to everyone else, then mea culpa.
Cheers,
Andreas
Click to expand...
Click to collapse
Check the second post again
http://forum.xda-developers.com/showthread.php?t=381600
fktsndr said:
Check the second post again
http://forum.xda-developers.com/showthread.php?t=381600
Click to expand...
Click to collapse
Thanks ... (Shame on you ... I noticed you just put it up there )
Cheers,
Andreas
Hmmm ... just noticed that the 3.13 SPL is WWE ... does this mean there should also be a GER version ?
And will I need the GER SPL 3.13 version, if I want to install the standard HTC WM 6.1 GER ROM ?
Which brings me to a general question, does the HTC RUU check to make sure that you have a GER SPL and a GER OS ? Because I had problems with installing a HTC WWE WM6.1 ROM previously (it aborted the installation), while the GER version worked just fine.
Cheers,
Andreas
acocq said:
Hmmm ... just noticed that the 3.13 SPL is WWE ... does this mean there should also be a GER version ?
And will I need the GER SPL 3.13 version, if I want to install the standard HTC WM 6.1 GER ROM ?
Which brings me to a general question, does the HTC RUU check to make sure that you have a GER SPL and a GER OS ? Because I had problems with installing a HTC WWE WM6.1 ROM previously (it aborted the installation), while the GER version worked just fine.
Cheers,
Andreas
Click to expand...
Click to collapse
Do not worry, spl not depends on language...the spl in GER or WWE rom is the same.

HSPL for ROM 1.14 [stock] ? HELP ! !

Hello, all, i have stock 1.14 rom, where can i find an hspl for this rom. Anything, that can put hspl on this rom plz/ Please help, new to this forum..
Elite_ said:
Hello, all, i have stock 1.14 rom, where can i find an hspl for this rom. Anything, that can put hspl on this rom plz/ Please help, new to this forum..
Click to expand...
Click to collapse
Here you go mate. Bottom of first post in this thread. Don't forget HSPL 1.14 is only to be used used on roms based on pre 1.56, i.e. everything before 1.56. You will need to use HSPL 1.56 for all roms based on 1.56+
Thxs mate, as i said am new, a bit confusing.. U refered me to the site, but, it says "New version will work on SPL 1.54 or above ROMS ". so what should i do ?
Elite_ said:
Thxs mate, as i said am new, a bit confusing.. U refered me to the site, but, it says "New version will work on SPL 1.54 or above ROMS ". so what should i do ?
Click to expand...
Click to collapse
SPL 1.54 and a rom based on 1.56 are 2 completely different things.
What rom are you trying to flash? If its just for a stock 1.14 rom then all youi need is HSPL 1.14
There is also this dummies guide fore flashing 1.56+ roms
OMG, am sorry, didnt know about the 'unsigned' before, doing the update now, thxs /
I used the unsigned version to flash my stock 1.14 rom , it became olinex, all were good. but when i used the energy rom[standard] from NRGZ28, it went ok but my blackstone screen is messed up with colours , everthing is wrong concerning colours.. What should i do ? I also wanted to do a hard reset but its not working !! I dunno what to do / plz help
Elite_ said:
I used the unsigned version to flash my stock 1.14 rom , it became olinex, all were good. but when i used the energy rom[standard] from NRGZ28, it went ok but my blackstone screen is messed up with colours , everthing is wrong concerning colours.. What should i do ? I also wanted to do a hard reset but its not working !! I dunno what to do / plz help
Click to expand...
Click to collapse
As I stated above you need to use the correct HSPL for whatever rom your using. If you want to use latest NRG rom you need to use HSPL 1.56. If your use incorrect HSPL you get colour distortions and unable to connect to make calls etc etc
Upgraded to latest hspl , and everything is fine.. Thxs//
No probs, just glad you got it sorted
Flashing Radio guide !!!!
Fallen Spartan said:
No probs, just glad you got it sorted
Click to expand...
Click to collapse
Hi,
I couldn't find any detailed guide about flashing radio ...
I want to put 1.09 radio (that came in a 1.14 rom) in my HD that have 1.14 stock spl but now have Miri 21882 rom that entered there with USPL GUI v 2.5 ...
Now I must use USPL GUI v 2.5 again to flash the radio ?
May I just have to flash the radio because my SPL is 1.14 and radio 1.09 came from a 1.14 rom ?
Is possible put any radio in any rom ???
I did not find any guide for that !!!
Help !!!
Thanks.
Marne Jr said:
Hi,
I couldn't find any detailed guide about flashing radio ...
I want to put 1.09 radio (that came in a 1.14 rom) in my HD that have 1.14 stock spl but now have Miri 21882 rom that entered there with USPL GUI v 2.5 ...
Now I must use USPL GUI v 2.5 again to flash the radio ?
May I just have to flash the radio because my SPL is 1.14 and radio 1.09 came from a 1.14 rom ?
Is possible put any radio in any rom ???
I did not find any guide for that !!!
Help !!!
Thanks.
Click to expand...
Click to collapse
It is possible to put any radio on any rom...yes. Just re-use USPL and then flash radio. A number of roms come with radio's included. If you do not want this radio, after you have flashed rom, just re-use USPL again and flash your desired radio

HSPL HD2 ?

Is the currently HSPL also for T-Mobile branden HD2 ?
after HSPL is the goldcard also needed???
thx 4 answers
The HSPL that has just been released is for any HD2, branded or not. As long as you follow instructions provided, you should have a successful HSPL flash, and then be able to flash stock (any language) or custom ROMs WITHOUT the need for goldcard
w32parite said:
Is the currently HSPL also for T-Mobile branden HD2 ?
after HSPL is the goldcard also needed???
thx 4 answers
Click to expand...
Click to collapse
- HSPL can be flashed on any HD2 device having the 1.42.0000 SPL. If you've flashed a custom ROM your SPL will appear as 1.42.6666 so don't worry you can still flash HSPL.
- No Goldcard method is needed after flashing HSPL
- HSPL won't hard reset your device after your flash it
All this is stated in the stickied thread on top.
sometimes i wonder if ppl even read the forum..
All the important info and explanations are allways sticky on the top of the page
thx 4 answers....
[closed]

[KITCHEN][UPDATE 1 FEB] OEM 2.02 + EXT 1.66.405.2 + RADIO 2.06.50.04 = 576 MB Ram !

LEO KITCHEN 2.02-1.66-576MB Bepe Ervius @ XDA
OEM 2.02
EXT 1.66.405.2
Big thx to anja31 for the 2.02 Patch !
http://rapidshare.com/files/344062018/LEO_KITCHEN_2.02-1.66-576MB_Bepe_Ervius___XDA.rar
http://www.mediafire.com/file/omq0injzymd/LEO KITCHEN 2.02-1.66-576MB Bepe Ervius @ XDA.rar
LEO KITCHEN 1.66.405.2 Bepe Ervius @ XDA
OEM 1.66.405.2
EXT 1.66.405.2
http://rapidshare.com/files/344060462/LEO_KITCHEN_1.66.405.2_Bepe_Ervius___XDA.rar
http://www.mediafire.com/file/mmiznzgfjy2/LEO KITCHEN 1.66.405.2 Bepe Ervius @ XDA.rar
RADIO 2.06.50.04
http://rapidshare.com/files/344062312/Radio_2.06.50.04.rar
http://www.mediafire.com/file/wneweylmyzz/Radio 2.06.50.04.rar
NETCF 3.5
NETCF is already been replaced in the kitchen now !
http://rapidshare.com/files/344062120/NetCF.rar
http://www.mediafire.com/file/dowo4otgwzt/NetCF.rar
Topaz EXT from the new rom with Sense 2_5_2011_3030_0
http://rapidshare.com/files/345107381/Topaz_External_Packages.rar
http://www.mediafire.com/file/hlqtzbjoiay/Topaz_External_Packages.rar
Leo 2.02 external packages with Sense 2_5_1922
http://rapidshare.com/files/345250256/LEO_External_Packages.rar
http://www.mediafire.com/file/d1otznc2yw1/LEO_External_Packages.rar
thanks for sharing, is there a guide in the archives?
Thanks for sharing!
you need the 202 SPL for this too work..
its very easy ! Look here
http://forum.xda-developers.com/showthread.php?t=469420
Remember to set the PP in OTHER (default is set to 6)
Set the MAX number of modules to 714
Dont use LZX compression !
U have to use Real WM 6.5 AKU
Create ROM
fards said:
you need the 202 SPL for this too work..
Click to expand...
Click to collapse
Do i realy have to place screenshots ?
Its working trust me !
Peter Deijnum said:
Do i realy have to place screenshots ?
Its working trust me !
Click to expand...
Click to collapse
what SPL you have?
Steve0007 said:
what SPL you have?
Click to expand...
Click to collapse
Bootloader : SPL-1.42.HSPL
So what in concrete must I do - I`m just downloading ...and then ?
Hi
Thank's you for share your djod.
Regard Oggi
thanks for kitchen!
Q-where i can find XIP 21889?
Peter Deijnum said:
THERE IS A BIG PROBLEM ! LEO HANGS AFTER SOFT RESET !!!
Could some of the real cooks please help !
Click to expand...
Click to collapse
This ROM has OEM from 2.02? If so did you do the apply fix to disable "boot once"
I only read there is a fix somewhere, but didnt notice how.
Regards
Flashmore
Flashmore said:
This ROM has OEM from 2.02? If so did you do the apply fix to disable "boot once"
I only read there is a fix somewhere, but didnt notice how.
Regards
Flashmore
Click to expand...
Click to collapse
As fards said earlier - you need the SPL from 2.02 too.
christonabike said:
As fards said earlier - you need the SPL from 2.02 too.
Click to expand...
Click to collapse
thanks for pointing that out bud
Regards
Flashmore
Ok im just a big noob learnig how to cook
Could someone explain how to ad the 2.02 SPL ?
THX !
install original 2.02 (so that it installs 2.02 spl) and than flash cooked one...
Hi guys, can you tell which file/files are responsible for such amout of memory?
Is this a kind of patch or something?
I just want to integrate 576 MB of RAM support into my ROM, but don't want to use 2.02 OEM.
xtremespb said:
Hi guys, can you tell which file/files are responsible for such amout of memory?
Is this a kind of patch or something?
I just want to integrate 576 MB of RAM support into my ROM, but don't want to use 2.02 OEM.
Click to expand...
Click to collapse
i think it's the combination of radio/oemxip/drivershigh.
you should be able to use oem/common from 1.66 (except drivershigh).
HD2Owner,
thanks man, I gonna try it tonight.
Can the chefcooks please help me !
Im trying to ad spl from the 2.02 rom to my OS.nb
The radio is working but not the spl
Im using NBHUtil.exe

[Q] Changing rom

I have a htc touch hd blackstone with a blackstone henge rom however I want to change my rom to the energy rom.
Do I just follow this tutorial or what do I do ?
http://forum.xda-developers.com/showthread.php?t=505377
mickeystar said:
I have a htc touch hd blackstone with a blackstone henge rom however I want to change my rom to the energy rom.
Do I just follow this tutorial or what do I do ?
http://forum.xda-developers.com/showthread.php?t=505377
Click to expand...
Click to collapse
Basically, yes, follow guide and you cannot go wrong.
However, if you already have henge rom on your device then you may not need to follow the guide fully. Reboot device into bootloader and check your SPL to find out if USPL or HSPL was used to put Henge rom on your device
If your SPL states 1.56.Olinex then you have HSPL on your device and all you need to do is flash NRG rom
If your SPL states 1.54.0000 then USPL was used and you'll need to re-use it before flashing rom.
Hope this helps
Rick
p.s. In future post all questions in General forum.....which is where I have now moved this thread

Categories

Resources