Related
is there any way on my mda i can use the wifi to browse the web while i talk on the phone via bluetooth or even wired? i heard theres a reg tweak but i cant locate it after many searches. please give me sum knowledge!
Not possible at the same time with GPRS/EDGE because your phone is class B. No class A phones are sold retail yet.
Yoıu have to suspend the call and browse the web or vice versa..
That's funny I can surf (either using WiFi or GPRS) and speak at the same time!
It was one of the main reasons I chose the qteck 9000.
OK! I edit..
You can not use GPRS/EDGE at the same time with phone call. One must be suspended. You CAN use wired or Wifi while talking on the phone.
http://forum.xda-developers.com/viewtopic.php?t=54738&highlight=
if you use UMTS connection and your provider is supporting it, you CAN surf while talking on the phone.
I confirm, Orange France does allow simultaneous 3G web + voice access I did the tests:
Was on a call switched to email picked up new mail, switched to PIE surfed some news sites as I kept on chating on the phone!
I thought the same was true with GPRS but I never did the above test over a GPRS connection...
It also works for T-Mobile in the UK, I use my MDA PRO as a 3G modem plugged into my PC via USB all day long, and can have phonecalls at exactly the same time as using the internet.
Neither one has to be "suspended", they both work at the same time (although internet use is a bit slower when you're on a call, because they both use the same bandwidth).
I haven't tested it with GPRS, that might well be different as 3G has a lot more bandwidth available than GPRS/CSD...
A few questions for sl9:
1. do you use the included Wmodem program to do this or did you configure something on your PC manually?
2. could you do the same with a BT connection from the WM5 machine to your PC (instead of using the USB cable)?
3. would using BT lower the available surfing speed on the PC?
4. what sort of data plan do you have to be able to "be connected all day"?
Thanks!
edeplano said:
A few questions for sl9:
1. do you use the included Wmodem program to do this or did you configure something on your PC manually?
2. could you do the same with a BT connection from the WM5 machine to your PC (instead of using the USB cable)?
3. would using BT lower the available surfing speed on the PC?
4. what sort of data plan do you have to be able to "be connected all day"?
Thanks!
Click to expand...
Click to collapse
1. Yes, I am using WModem with the USB cable so the MDA PRO acts like a 3G broadband modem to my PC.
2. There should be no reason why you can't do the same with Bluetooth. But bear in mind Bluetooth is SLOWER than 3G (it's about as fast as GPRS), so if you want to use the full speed of 3G, you need to use the USB connection. IR (Infra-Red) is much faster than Bluetooth and faster than 3G, but slower than USB.
3. Yes - see no. 2 above for the reason why.
4. I am on T-Mobile UK's Web & Walk Professional, "unlimited" 3G and GPRS data use (they say 2GB max usage per month, but I never get near that). So I stay connected to my home PC from my office PC all day long with remote desktop :mrgreen: Surprsingly, this doesn't use too much bandwidth - this month I used about 600MB which is far below the 2GB they allow.
T-Mobile in the UK have the best data tarriff by FAR, I have this bolted onto a superb base voice tarriff too which is Flext 20 - a brilliant companion to WnW PRO in fact probably the best combo tarriff there is on any network, in any country :mrgreen:
Note: You can also use activesync at the same time as 3G WModem and making a voice call(!).
I have tested connecting to my PC with Activesync over bluetooth, connecting my PC to the internet using WModem over 3G with USB, and then making a voice call on my phone. It all worked! I could surf the net whilst talking on the phone and ActiveSync was busy synchronizing my calendar and e-mails at the same time. This is truly an amazing device, I love my MDA PRO :mrgreen:
Thanks for the quick reply!
OK guys.. the first post was about MDA, you are talking about 3G and MDA :?
I only mention about GPRS/EDGE not 3G/wired or smth. else..
I think we are not on the same thing. Forgive me if I am wrong..
do i have to change any settins to get wifi/phone call to work? because i cant seem to get it to go yet
For wi-fi + phone I o not think there is any settings that need changing.
Are you sure you have enough battery? If the level is low it could be possible there is not enough power to handle both radios...
Also are you sure both wi-fi and telephone work correctly if used by themselves?
Finally do you have an MDA IV (ie HTC Universal) because otherwise your in the wrong forum from the start!
i`m sure the wifi and the phone work themselves. and i have a tmobile mda tthe us version... i`lll try again and let u guys know what happens
Hey there,
I've been searching the net and this forum for a long while but did not find anything close. Here's what I have in mind:
I have a mobile plan that allows free calls within the provider network. I have a couple of phones, normal mobiles, but also three HTC devices.
I would like to place one HTC device (WM5 or WM6 with Wifi or via ActiveSync) at home, where it will always stay on and is connected to the Wifi or the internet via ActiveSync. This device contains a SIM CARD and therefore is callable.
Now, when I am out, I'd like to use my other phone and basically dial-up the phone at home for a data connection (DUN). This part should be easy.
The tough part is: How do I get my phone at home to pick up the call, treat it as a data call and route the data through the Wifi or ActiveSync to provide internet over this call/connection.
Anyone done anything like that? Ideas?
Is this wat ur looking for ?
http://forum.xda-developers.com/showthread.php?t=251957
second page
well, thanks for the hint. This would only solve part of the problem, but I am more worried about the modem part.
Now, I've changed the scenario a bit and I think this should be doable, yet I fail to get Vista to setup a incoming connection via Bluetooth modem...
New scenario:
Vista Internet PC connected to HTC WM5 via Bluetooth, Bluetooth Modem detected and useable on PC.
In Win98, I think, I was able to set up an incoming modem connection, so it would pick up automatically and take the call as a data call and route it over the local network. This would be perfect!
In Vista, I don't manage to find this incoming connection option anymore.
Yet, this solution would need a running PC all the time, not perfect. So if anyone has an idea on how to do this solely on a HTC WM5 device, this would be brilliant!
Hello,
i have noticed that Pepole have problems to call me on my new Touch HD Then i have played a little with the device and can say thats the data connections for updating weather, mail, etc thats making this problem.
I have tested it by calling my mobile phone with a wired one and while dailing i'm updated the weather manualy. This results in that my call is not comming to my mobile phone it's directed to my mailbox . Then I have changed with HD Tweak that my data connections are allway on (default is off) and now i can't reporduce this problem.
Do you have similar problems ?
What negative effects have the "allways on" setting ?
My device is a HTC Touch HD from German Provider BASE. Tested with the ROMs :
RUU_BlackStone_HTC_GER_1.14.407.3_Radio_52.49a.25.26_1.09.25.14_Ship
, Duttys HD V2.6 XTREME and Duttys HD V2.7 XTREME
Regards,
waringer
Probably you have a GPRS connection instead of 3G. GPRS can only handle a data or a voice connection one at a time.
With 3G you can receive calls and use a data connection at the same time.
Vanstra said:
Probably you have a GPRS connection instead of 3G. GPRS can only handle a data or a voice connection one at a time.
With 3G you can receive calls and use a data connection at the same time.
Click to expand...
Click to collapse
I think your right.
Is there any option that the device only uses 3G data connections ?
Hi
Just got an Orange 3G. One annoying feature is that if it drops a WiFi connection it goes automatically to using GPRS without any indication (which thens starts to cost !!!)
Orange say you can't stop this happening. Does anyone know any trick to stop this (there is no way to keep the GPRS off as there was on my old Touch)
Be grateful for any help
As I said to the person who asked the same question a few days ago *sigh*, google nodata
petez1 said:
Hi
Just got an Orange 3G. One annoying feature is that if it drops a WiFi connection it goes automatically to using GPRS without any indication (which thens starts to cost !!!)
Orange say you can't stop this happening. Does anyone know any trick to stop this (there is no way to keep the GPRS off as there was on my old Touch)
Be grateful for any help
Click to expand...
Click to collapse
You need to check how your phone is connecting.
AFAIK the orange ROM uses the unique manager not the normal HTC connection manager.
This means you dont really have a WiFi connection. Orange unique is their VOIP(??) implementation.
If you have a livebox and orange as your ISP your phone will automatically switch to using your WiFi connection for phone calls saving you money, the downside is you cant use wifi for anything else.
The only way to sort it is buy flashing a different ROM.
Orange Unique ----http://www.business.orange.co.uk/services/broadband/unique-for-business/
Hi
Thanks for the info. Been trying to sort out with Orange and same answer - disable GPRS and the WiFi stops as well !!! (One of the Orange guys even admitted that it was because they don't make money on voice now, only data). The 'nodata' fix doesn't work as it also stops the WiFi. Any thoughts on which ROM I might flash?
Thanks for your help
I'm actually an Orange employee, working for Handset Faults, and looking to solve this for a customer.
There is a rom update available from HTC, which apparently fixes this, however the customer I'm trying to resolve this for, has tried updating and his serial number shows as no available ROM.
I don't think the No-data resolution will work, so hoping if theres any other solutions you guys could suggest?
I know on my current HS, which is a Hermes, I've the communication manager, which i believe isn't available on the Touch 3G, unless debranded.
Really, I'm just trying to get more advice, so would appreciate anyone's tried and tested work-around, as i've to call said customer back tomorrow, with hopefully a resolution, but if not, then he'll have to wait till a ROM update becomes available from HTC/Orange for branded handsets.
I found a solution to this problem last night that works for me on my Touch 3G with Orange.
Enter Unique Manager - Advanced Settings - Network Adapter - My Network Card Connects to - and ensure they're all set to connect to The Internet.
I have also setup a Block GPRS connection under Settings - Connections - Conections which stop GPRS connecting and can now connect via Wifi no problem.
Bob
bobmac892 said:
I found a solution to this problem last night that works for me on my Touch 3G with Orange.
Enter Unique Manager - Advanced Settings - Network Adapter - My Network Card Connects to - and ensure they're all set to connect to The Internet.
I have also setup a Block GPRS connection under Settings - Connections - Conections which stop GPRS connecting and can now connect via Wifi no problem.
Bob
Click to expand...
Click to collapse
Bob
Thanks for this - going to give it a try but when i go into Settings - Connections for the second part of your fix, where do I go next (I can't find Conections which stop GPRS connecting)
Thanks
Thanks Bob,
Will copy this and put it on my phone somehow!
Thank you very much for the advice!
Greeee
Did you manage to make it work?
petez1 said:
Greeee
Did you manage to make it work?
Click to expand...
Click to collapse
Unfortunately, the customer cancelled their upgrade and got another handset before trying this.
Shame really!
Thanks for the help though!
petez1 said:
Bob
Thanks for this - going to give it a try but when i go into Settings - Connections for the second part of your fix, where do I go next (I can't find Conections which stop GPRS connecting)
Thanks
Click to expand...
Click to collapse
Bob/Greee
Still haven't been able to work out the second part of the fix - can you help?
Thanks
I've no suggestions tbh, cause I don't own a Touch 3G, I personally run a Hermes.
I'm actually trying to follow this up, and check what Bob meant by blocking GPRS on it.
Also, would you chaps be so kind to advise me if GPS under the HTC Touch 3G uses GPRS to connect, or does it use Satelittes like a normal GPS?
Just another question my customer asked today.
Thank you,
Greeee said:
I've no suggestions tbh, cause I don't own a Touch 3G, I personally run a Hermes.
I'm actually trying to follow this up, and check what Bob meant by blocking GPRS on it.
Also, would you chaps be so kind to advise me if GPS under the HTC Touch 3G uses GPRS to connect, or does it use Satelittes like a normal GPS?
Just another question my customer asked today.
Thank you,
Click to expand...
Click to collapse
The GPS will use the satelitte to get a signal (just like proper SatNavs), but if there's an A-GPS feature, it will use a tiny bit of GPRS to speed up the process.
It'll then use the GPRS (if enabled) to download maps for the local area if it there isn't a map already installed on the handset.
That's why it's always a good idea to disable GPRS when roaming, at £8/mb- it's a pricey thing to use.
However, you can normaly download maps using WiFi before you leave (if you know where you'll be going), which will save time and money on using the network for data.
I get asked that question alot too (I work for them too, in NT1- First Impressions)
It will use the GPRS for the GPS locator if you leave A-GPS selected. Fortunately you can disable A-GPS to stop this happening.
Interestingly, I can't find any real difference in the speed of 'finding' satalites between standard GPS and A-GPS.
Thanks for the advice guys.
So any ideas how to fully block GPRS traffic outgoing, unless wanted? So its WIFI only when my customer is at home?
No further movement on this one...
Anyone got any ideas, how to utilise the WIFI facility switching the Unique Phone part off, and blocking GPRS traffic?
Thank you,
NoData works on fone.......BUT
Hi I got my touch 3g couple days ago its on orange contract brilliant fone apart from cannot connect to wifi as you all know it still connects thru gprs so I downloaded Nodata installed on fone disabled gprs with it. So good so far switched on wifi thru unique manager then checked that data connection was still off and it was BRILLIANT I shouted.
My wifi was connected to my hub and data connection was off woo hoo
Started web browser and lo an behold Get the message "cannot connect with current connection settings"
As far as I am led to believe at the present time there is no way round this problem apart from installing a clean version of windows but if I am mistaken please tell me how to get around this problem.
Cheers Biggles
HTC touch Dual An a HTC touch 3G
I have the Touch 3g with Orange - but thanks to the guys on this forum I got rid of the Orange branding/mess by using a 'stock' rom and I am not now using Orange Unique. Then I did the following........but not sure if it works with the Orange Unique stuff.
As far I as I can see there is no explict way of turning GPRS off - if it is set up then it will connect to it when a program requests data. I have unlimited internet on my home network but I need to turn GPRS off when roaming abroad so I don't get charged silly amounts.
I found that the only way I can guarantee to stop the phone using GPRS is to change the name of the Access Point Name - then it cannot connect to the service. On my phone (a Touch 3g) it is under Settings, Connections, Connections, Manage Existing Connections - then edit the connection details. On mine it is Orange Internet - so edit this and get to the Access Point Name - which is orangeinternet in my case - i just take away a few letters at the end and save the settings.
At this point GPRS will not work because the Access Point Name is not correct and you will get a message from any program trying to access the internet if wifi is not enabled. To get it to work again just edit the Access Point Name back to what it was. In my case I do not have to switch the phone off/on - I can just change the Access Point Name at anytime and it works or dosn't as I require.
Hope this helps.
doublegandt said:
On my phone (a Touch 3g) it is under Settings, Connections, Connections, Manage Existing Connections - then edit the connection details. On mine it is Orange Internet - so edit this and get to the Access Point Name - which is orangeinternet in my case - i just take away a few letters at the end and save the settings.
Click to expand...
Click to collapse
Hi,
With Orange Unique there isn't any "Manage Existing Connections" that I can find - just addding new modem or VPN? Am I in the right place?
Thanks
for the benefit of people who may be subscribed to this thread, I think I have found a fix for the orange rom using data connection instead of wifi, read on here:-
http://forum.xda-developers.com/showpost.php?p=4517074&postcount=12
post back to that thread if it works for you!
Reflashed my Jade from UK Orange to JADEMAN rom recently...
I don't think this is a ROm related problem (unless you know otherwise !) so I have posted in general part of forum.
Can anyone tell me how to force the phone to use Wifi to connect to the internet.
It connects via GPRS fine but i want to disable the GPRS DATA for travels abroad so I don't run up a huge data bill. I can stop the data with "NoData" app, but if I now try to connect to internet with Opera or Internet explorer if fails..
Is there something I am missing, to tell it either to connect via wifi before using GPRS data or to only connect via wifi. Do I need to create a connection ?
The create new connection page doesn't list using WiFi, bluetooth is the only "WIRELESS" type connection that appears to be offered.
Also when the wireless AP list is shown and I try to connect to an AP showing available that I have previously setup with WEP key etc, it fails to connect.
I am sure to be missing something but I can't spot what the problem is...
Any help appreciated.....
Phil
Normally Windows Mobile connects via WiFi first, if available, and only when not present it uses GPRS. That means that you do not need to disable GPRS if an WiFi-connection is established.
I have no personal experiences with "NoData". Perhaps someone else can help.
phil-w said:
Can anyone tell me how to force the phone to use Wifi to connect to the internet.
It connects via GPRS fine but i want to disable the GPRS DATA for travels abroad so I don't run up a huge data bill. I can stop the data with "NoData" app, but if I now try to connect to internet with Opera or Internet explorer if fails..
Is there something I am missing, to tell it either to connect via wifi before using GPRS data or to only connect via wifi. Do I need to create a connection ?
The create new connection page doesn't list using WiFi, bluetooth is the only "WIRELESS" type connection that appears to be offered.
Also when the wireless AP list is shown and I try to connect to an AP showing available that I have previously setup with WEP key etc, it fails to connect.
Any help appreciated.....
Phil
Click to expand...
Click to collapse
MvBoe said:
Normally Windows Mobile connects via WiFi first, if available, and only when not present it uses GPRS. That means that you do not need to disable GPRS if an WiFi-connection is established.
I have no personal experiences with "NoData". Perhaps someone else can help.
Click to expand...
Click to collapse
AFAIK the moment you invoke any app that requires internet connection (weather update, activesync, opera) Jade invokes data connection first (3G, GPRS, etc) That's how it works on my set. Unless you invoke Wi-Fi connection first, then data connection is ignored.
I have had a bad experience that even if all setups are ok Wi-Fi conn thru Ap fails.
Corrected such a way;
Under 'Wireless /Lan' settings
Power mode should be brought to 'best performance'
azahidi said:
AFAIK the moment you invoke any app that requires internet connection (weather update, activesync, opera) Jade invokes data connection first (3G, GPRS, etc) That's how it works on my set. Unless you invoke Wi-Fi connection first, then data connection is ignored.
Click to expand...
Click to collapse
That's what I meant: You have to activate WiFi by yourself to prevent jade using GPRS (etc.). Your description is more precise, I did not make it clear enough. Thanks for correction.
Hi and thanks for replies so far...
I have just done a hard reset to make sure I haven't loaded anything that may mess up the wifi connection... Even when wifi is on and I am connected to a wifi access point OK it still uses gprs/3g not wifi..
Back to the "drawing board" I think...
Any more ideas please...
Phil-w
with this app you can disable or enable data connections as you please.
there is another app here in the xda that will disable data when roming automatically, but i don't remember the name.
faria said:
with this app you can disable or enable data connections as you please.
there is another app here in the xda that will disable data when roming automatically, but i don't remember the name.
Click to expand...
Click to collapse
Hi faria
Unfortunately I find it better to go into connection manager, select airplane mode, then enable wifi. Then do any surfing, live messenger etc. Then once finished go back into connection manager, re-enable phone.
Like others, I'm on Orange, wifi no longer stays the internet source even if it is connected. I have it on all the time, but if I use the internet, I have to go through the above procedure or it costs me credit through Orange.
Janeway
janeway said:
Unfortunately I find it better to go into connection manager, select airplane mode, then enable wifi. Then do any surfing, live messenger etc. Then once finished go back into connection manager, re-enable phone.
Click to expand...
Click to collapse
The only disadvantage is here is that, you'll miss calls when there are incoming calls because your phone is inactive (while PDA is). You can just disable data connection (CommManager - Data Connection - off) and leave wi-fi connected.
Like others, I'm on Orange, wifi no longer stays the internet source even if it is connected. I have it on all the time, but if I use the internet, I have to go through the above procedure or it costs me credit through Orange.
Click to expand...
Click to collapse
Just wondering.. how you identify which connection is being used, wi-fi or 3G/GPRS when both are connected.
What if you disconnect data connection (3G/GPRS) without activating the airplane mode, can you surf using wi-fi connection.
One possible reason - set connected to the AP via wi-fi but AP is not connected to internet, thus set seeks 3G as another route to internet.
Hi azahidi, thanks for taking time to reply to me . Your points as follows:
Yes, missing calls is the disadvantage, but I use my pda more for data and hardly any calls, so not so important for me, but obviously we be much better if that were possible as I do sometimes forget to swich back. If I disable the data connection, it automatically re-initializes itself as soon as ANY data is being transmitted - even with just wifi active - except when it is in airplane mode. This is a new thing for me with the Jade, didn't have that problem before with my previous HTC phone.
There is an icon for the 3G - when its in use it shows it - it goes from being a large G in a square to a smaller one with signal bars.
Wifi is definitely connected, I surf online with it all the time.
Its like 3G has priority over wifi - there should be a way to change that.
Hope the above makes sense.
Janeway
I'ven been using 'Nodata' succesfull the last past months, it does it's job well, but i'm not on Orange as you are, that might be the difference.
Just to be sure i've also changed my settings:
start > settings > connections > connections > advanced > select network > My work network (twice).
and
start > settings > connections >advanced network > uncheck HSDPA and in SMS choose 'GSM'
(all is translated from Dutch, hope i used the right words)
Thanks Nirak.
One of my settings was wrong - I should have known that from last time, but my brain's elsewhere at the moment!
Must have upset it when I flashed
Cheers for now.
phil-w said:
Hi and thanks for replies so far...
I have just done a hard reset to make sure I haven't loaded anything that may mess up the wifi connection... Even when wifi is on and I am connected to a wifi access point OK it still uses gprs/3g not wifi..
Back to the "drawing board" I think...
Any more ideas please...
Phil-w
Click to expand...
Click to collapse
Phil, can't you simply switch the "Data Connection" on/off switch to 'off' ?
I have it in the Comm Manager right at the bottom. The Wi-Fi and Phone could be left 'on'. I can't try if it works because I only use the phone on 2G.
Joe
jfranek said:
Phil, can't you simply switch the "Data Connection" on/off switch to 'off' ? I have it in the Comm Manager right at the bottom. The Wi-Fi and Phone could be left 'on'. Joe
Click to expand...
Click to collapse
That's how it should work actually. Either one, Wi-Fi or 3g/GPRS. But what phil is saying is that it also activates data connection (3G/GPRS) even when wi-fi is connected.
On my set, and in my network (not Orange but standard GSM).. this is how it works :
The moment I invoke any application that requires internet connection (weather update, activesync, opera, etc) Jade invokes data connection first (3G, GPRS, etc). Unless if I invoke Wi-Fi connection on first, then data connection is ignored, it will stay off.
So what I normally do is, whenever I want to use internet, I connect using wi-fi then browse the internet. If there is no available AP, then I turn off wi-fi and continue browsing , which is then connected using 3G/GPRS/EDGE?HSDPA
azahidi said:
(...) The moment I invoke any application that requires internet connection (weather update, activesync, opera, etc) Jade invokes data connection first (3G, GPRS, etc). Unless if I invoke Wi-Fi connection on first, then data connection is ignored, it will stay off.
So what I normally do is, whenever I want to use internet, I connect using wi-fi then browse the internet. If there is no available AP, then I turn off wi-fi and continue browsing , which is then connected using 3G/GPRS/EDGE?HSDPA
Click to expand...
Click to collapse
This is the way it normally works and should work under WindowsMobile. The Orange-ROM seems to be "manipulated" by the provider (?) not to work in this desirable way. All (or some?) Orange-ROM-Handsets seem to activate the data connection (3G/GPRS) every time ignoring the established Wi-Fi-connection. This rises the providers business volume.
It would appear to be correct about orange having had the method of connection changed.
I have just found and installed a different RADIO.ROM to my Orange Touch 3G and now it appears to connect as required.
Still not 100pc happy but will post my observations later with the rom numbers if it helps anyone else out..
Phil-w
Look on the HTC JADE reflashing on this site
Hi All,
There is no way around the Orange apps to enable WiFi, but I successfully reflashed the Roms in my Orange touch 3g yesterday.
Have a look here for the details on what to do:
http://forum.xda-developers.com/showthread.php?t=514406
Follow the instructions carefully, and I chose to install the Stock HTC ROM 1.40.721.2 from the ROM post.
Wifi is then free....
)
Well I appear to have got around the Orange Unique problem.
I upgraded the Rom on my Orange UK Touch 3G to the Jademan SuperRom V3. That got rid of the Unique side of things but with no improvement with Wifi connectivity.
The connectivity problem with wifi still caused problems, the internet connection would NOT use wifi even if I disabled the GPRS / 3G data connection with "NoData" It just returned a message saying it had failed to connect.
I decided to find a new radio rom image which I managed to on this Jade forum. I flashed the new rom and tested the same connections again. This time the wifi connected via Wifi first and without any problem... It would appear that flashing the Jademan rom didn't update the radio as well, I needed to update the radio as well.
The clue may be in the radio rom version number,
Original orange 0.29.30.U23
New Radio rom 0.41.30.12
A assume that the U in the orange rom refers to "Unique", which now I have replaced it, it appears to have cured the wifi problem and it is working just as any other Non-Orange Jade / Touch 3G does....
I have not noticed any problems with any other radio related issues since the upgrade, GPS, 3G/GPRS etc all seem to be fine.
I do find that the phone does struggle to connect with some Dlink AP's though... It may be a problem with the Dlink more than the phone but I still need to do more tests on that.
May be that will help a few other people out there...
Phil-w
Hi Phil,
I had exactly the same problem!
Started with an unlocked HTC Touch 3G with Orange customised ROM and then replaced it with the SuperROM. WiFi was unusable so (having read your post) I re-flashed with the standard ROM released from HTC and then re-flashed the SuperROM. This gave me the same Radio ROM that you show above however the WiFi problems seemed to be no better.
While I liked the idea of having the SuperROM I have gone back to the latest standard HTC ROM and all seems to be well.
John
Hi John,
My wifi now seems fine except not liking Dlink AP's for some reason.
I don't even need to stop gprs data with NoData etc, if there is a wifi connection available that I have setup previously it will use that rather than GPRS..
I appear to have "de-Oranged" it !!!
What probs do you still have on your Touch 3G ??
Phil