Audio and video are not synchronized! - Touch Diamond2, Pure General

Hi guys sorry if I write in the wrong section but I am new to the forum! I have a problem ... after recording a video with my Topaz camera...I notice that when i playing the video, audio and video are not synchronized! It may depend by what? It's a problem of the camera?
Thanx very much for the attention!
PS: Sorry for my bad english but i am italian and i can't speak english well

Have you played the video in a PC?

not yet...i'll try and i'll let you know!

Hey guys...i tried to play the recorded video on the pc and the problem persists...Audio and video are not synchronized! I tried to record in all formats: MPEG4, H.263 and H.264. In the last two, desynchronization not notice much ... in fact it is almost absent...the problem is that I wanted to use the MPEG4 format for better quality of the recorded movie...but is with this format that audio and video are desynchronized! How can i solve this problem? I haven't installed any program and I have noticed it since the first start of the device.

I have explored the registry to try to improve some settings but without success...i can't understand the reason of this problem! Nobody can help me????

Related

I-Mate video - SOUND NOT SYNC'ED WITH VIDEO ON PC???

I have been taking quite a bit of video on my I-Mate, both in MPEG and AVI Format. The quality is acceptable, and plays back perfectly on the I-Mate.
The problem I am having is that after I transfer the video to my desktop, whether using NERO, Medial Player or Quicktime to view the videos the AUDIO is not SYNC'ED with the VIDEO ! !
There is about a 1 second delay between the sound an the video ! It really stinks! Does anyone have a solution for me?
Thanks (in advance!!)
Is anyone else experiencing this?
Anyone?

Watching Videos from Touch HD on PC

Hi Guys, i have a noob question.
How do you watch videos from your HD on PC, what player or codec do you use? I can see the image, but MPC reports there is no codec installed for the sound.
milosn said:
Hi Guys, i have a noob question.
How do you watch videos from your HD on PC, what player or codec do you use? I can see the image, but MPC reports there is no codec installed for the sound.
Click to expand...
Click to collapse
Try VLC http://www.videolan.org/
I tried it before, now i tried it again, i get the same message every time for 3gp or mp4:
No suitable decoder module:
VLC does not support the audio or video format "samr". Unfortunately there is no way for you to fix this.
Does anyone know how to solve this? Where can i Find that codec? I googled it with no results.
milosn said:
I tried it before, now i tried it again, i get the same message every time for 3gp or mp4:
No suitable decoder module:
VLC does not support the audio or video format "samr". Unfortunately there is no way for you to fix this.
Does anyone know how to solve this? Where can i Find that codec? I googled it with no results.
Click to expand...
Click to collapse
Have you tried the k-lite codec pack?
www.codecguide.com
or the community codec pack
www.cccp-project.net
probaj sa gom plejerom,pušta sve a i džabe je
vidojajce said:
probaj sa gom plejerom,pušta sve a i džabe je
Click to expand...
Click to collapse
Please abide by forum rules and use English language. Free translators can be found online using Google
Google a Coreplayer. Plays anything without any conversion.
kitzie said:
Google a Coreplayer. Plays anything without any conversion.
Click to expand...
Click to collapse
he is trying to play videos he made on his hd on his pc, not play videos on his hd lol
you mean to say you've never seen this application?
http://forum.xda-developers.com/showthread.php?t=467112
you missed one half of your blackstone life mates!
jigners said:
you mean to say you've never seen this application?
http://forum.xda-developers.com/showthread.php?t=467112
you missed one half of your blackstone life mates!
Click to expand...
Click to collapse
do people on here not read lol
As I said, I'm trying to play mp4 or 3gp that I made with my phone on my PC. Thank you guys for your advices. This evening, for the first time since I got my HD, i heard the sound. I'm usimg MPC Home Cinema and Windows 7 x64. I don't know what happened, yesterday nothing worked, and today all is fine !!?? Strange, I didn't install anything except VLC.
I was going to suggest VLC it will play just about anything. My guess would be it has installed the required codecs.
BGF
I think VLC is using it's own codecs, i just tried the demo 3gp from my phone and there is no sound. In MPC Home Cinema x64 everything works fine, i guess it's this latest version (1.3.1249.0)
i've tried vlc, quicktime alternative, mpc, mpc-hc, but still, i always get the same error: ".samr files cannot be opened" or sthng like that.
there's got to be a way...
im using win 7 x32.
Has anyone found a solution for this problem? I am also trying to play videos (that I recorded with the touch HD in mpeg4 format) on my PC, but no player can play the sound. VLC gives me the error that it cannot play samr audio. I also have the full k-lite codec pack installed, but still no sound.
How do you guys play Touch HD videos on your computer?
you most probably know this...
... but here is a reminder...
i view my hd video's on pc.....
by going to video settings on hd......advanced ..capture format and set it to H.263 instead of mpeg4...
i then view it with quicktime..etc..on my pc..!!
...why persist with mpeg 4..?
above method still gets you there ....to view on pc..
(maybe picture quality not fantastic ...but still good to view..)
good luck
willcor
willcor said:
... but here is a reminder...
i view my hd video's on pc.....
by going to video settings on hd......advanced ..capture format and set it to H.263 instead of mpeg4...
i then view it with quicktime..etc..on my pc..!!
...why persist with mpeg 4..?
above method still gets you there ....to view on pc..
(maybe picture quality not fantastic ...but still good to view..)
good luck
willcor
Click to expand...
Click to collapse
Thanks. You're right, I'll stick with H.263 and play the 3gp video in Quicktime.

Video format?

hello , could someone please tell me the specific convertion settings for audio and video , so that the video plays normally on tattoo? tried to convert avi -> mp4 using h264 25 fps 128 bitrate , but the movie was all twitchy and unwatchable.. someone please help me.. just wanna watch movies on my phone, like all normal people
seems like i made it work so far , but i wanna know the best settings for encoding the video , so that i'll get the best quality that tattoo can afford , and not waste any memory on my sd
HeBckoe said:
seems like i made it work
Click to expand...
Click to collapse
And not a word about how you did it?! „Thanks“ dude...

Problem with playing H.264 format

Hi Guys,
I have a problem with my HD2. I used BsB tweaks tool to enable some new features. Among other I’ve enabled additional recording formats in camcorder. Unfortunately when i record a move in H.264 I am not able to play it. The phone freezes on "Loading..." screen I was trying few things to solve the problem:
1\ installing TCMCP
2\ installing Core Player
3\ looking for codecs (unsuccessfully)
4\ HR
... non of above helped I'm using official ROM 1.66 RADIO: 2.07 Does anybody encountered such a problem ? Any ideas ? Please hlep…
Please, anyone ? At lease let me know if its normal that i'm not able to play movies in H.264 format. I'll be very gratefull...
Same here mate - unable to play them. I personally don't see it as a big deal and just use MPEG.
Grate, thanks for the answer... I was worrying that something is wrong with my HD2
BTW previously I was using HTC TP2 and there was no problem with playing H.264 video format... Any idea why ?
I have no idea mate. It was obviously disabled for a reason though
Well for sure it was ... But still wondering... TP2 is a more likely business smartphone and HD2 rather multimedial device - for music, videos, games etc. So why the function is disabled here ?!

Recorded videos without pictures

Hi guys, I'm having really strange problems with HTC Camera!
Eerytime I record a video on my HD2 I can hear the sound but can't see anything! CorePlayer doesn't play the videos, too but VLC on my Desktop does! I'm using the whole TMO US 2.10 ROM for cooking!
Any ideas what happened?
there are some PWMP codec pkgs that maybe needs in the codec you are taking video for, i use mp4 so the coreplayer handles it very very bad i see the vids on WMP

Categories

Resources