Hi all,
I decided to upgrade my uni with Tomal WM6.5 ROM. The result is the black screen with version info only. Bootloader is OK, i formated DOC,flash again, but unfortunatelly same result. any ideas here? Thanx for any help.
Welcome to forums
Did you already read the Wiki?:
http://wiki.xda-developers.com/index.php?pagename=HTC_Universal
Try to flash to another ROM and then try again with that one
pixelorgy said:
Hi all,
I decided to upgrade my uni with Tomal WM6.5 ROM. The result is the black screen with version info only. Bootloader is OK, i formated DOC,flash again, but unfortunatelly same result. any ideas here? Thanx for any help.
Click to expand...
Click to collapse
The first boot may take serveral minutes, wait patiently.If there's no difference after 10 minutes, try flashing back to your original ROM.
Related
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
guerilladev said:
I need help guys, I've tried searching but i cant find the solution, I have run uspl a few weeks ago and have been experimenting with some different roms and yesterday I installed a new rom, WM6_WWE 3.7+ RADIO 2.94.90+BigStorage (found here http://forum.xda-developers.com/showthread.php?t=318835&highlight=big+storage) and now cannot re flash my device. It does enter bootloader then the progress bar goes to 3% and I get the message ERROR [270] UPDATE ERROR
This has never happened to me before. Can anyone help?
Many thanks
Click to expand...
Click to collapse
Re-flash USPL and try again.
Panic over, thanks very much Shand359!! Its working just fine now. I guess the SPL was too high eh? I did try to reflash with uspl at first but it seems the copy that I had on my pc was corrupt, i downloaded it and its flashing a new B&B3.7 right now. Thanks again!
Glad you got it going.
XDA ORBIT
Hi guys,
I have trouble with my orbit.
It is german and i want to change it to English,
i suppose i have to flash it before using the new english rom..
I do not know anything about this things..
Please help. Thank you...
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
baboon99 said:
02AN
Check out this thread below...
This will unlock your orbit, then you can install any rom....
Sure the english rom is on here somewhere
http://forum.xda-developers.com/showthread.php?t=311403
G
Click to expand...
Click to collapse
First of all, thanks..
I did, and it said updated. I thought it is done..
And i will try to load english rom..
But i scared to do this action because i do not wanna lose my device.
I suppose i have to use it on german language...
Hello folks,
I'm new here. I don't know much about the technical stuff.
I have HTC3300 (Artemis).
I installed "Gullum's WM6.1 Beta version" in it but It became slow
than I searched here in this xda forum for WM6 and found a WM6 rom for Artemis.
I installed it.
That rom's name is "HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_ R".
Now I'm not able to USPL. I have tried 3-4 times. (without SIM and SD Card)
After using USPL utility, on booting it shows:
IPL 3.13.0001
SPL 3.13.0000
GSM 02.94.90
OS 3.13.0.0
SPL is not changing to 1.11.0000. Please HELP me.
How can I unlock it?
I mean how can I succeed to USPL my Artemis?.
I shall be GRATEFUL to YOU
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Zecanilis said:
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Click to expand...
Click to collapse
First of SORRY for the double post. I thought the same previous post will hide in between the posts in that thread. I won't repeat this in future..
Problem is that I want to upgrade the Radio Rom, so when I use the USPL tool to CID unlock my phone,
after reaching 10%....20%....30%.....40%....50%....60%....70%.....100%, the screen become white and phone gets disconnected from the Active Syn.
Either I have to remove the battery or I have to soft reset to start the phone after "white" screen.
On booting, it still shows SPL 3.13.0000 not showing 1.10.0000.
SPL didn't change to 1.10.0000, is it means that device is still CID locked?
please tell me where I'm mistaking here..
I'm using Vista Ultimate SP1 in my Notebook.
Nobody is there in this forum,
who can help ME ??
Anyway ... thanx to everybody..
I myself found the solution...
New Radio Rom - INSTALLED > 03.34.90 ..
I'll post my feedback about this new RADIO ROM 03.34.90 in the main post by Zecanilis
Thanks "Zecanilis"
could you please let me know the solution?
I got the EXACT same problem
thanks.
Dont worry, the solution was on this post by pvdhelm:
http://forum.xda-developers.com/showthread.php?p=1312109#post1312109
Bhups said:
could you please let me know the solution?
I got the EXACT same problem
thanks.
Click to expand...
Click to collapse
nothing to worrying.. just keep going..
when white screen appeared, i just continued to flash my phone by starting RUU application usually present in the rom folder along with the rom to be flashed..
it showed progress bar in the Computer screen {from 1% .... till 100%}while the PPC screen appeared white during this procedure..
and the flashing process reached to 100%, displaying CONGRATULATIONS on the Computer screen and PPC got restarted by itself with new ROM.
I have done flashing up to 20-25 times by this method.
Phone is WORKING like a CHARM.. NO PROBLEM AT ALL ..
Hi,
I have a HTC P3350 and am quite bored with the current look and feel of it, is it possible to upgrade it to 6.1 PRO. Please guide me.
Thanks
Yes it is.
Just search in the forum the Artemis ROMs. You can flash all of them.
They work the same on your Love. Don't forget to READ and flash USPL first.
Cheers
HI,
I tried using "Artemis Touch 4.01 Full with 4 sided cube", which i found somewhere in this forum but i dint find the results more attractive and moreover my phone has become slower than ever before. Is there any way to revert back to the previous version cause i am unable to install the ROM you have suggested in the link above??? It says that the image is corrupted. Please help me out.
Thanks
XDA Taher said:
HI,
I tried using "Artemis Touch 4.01 Full with 4 sided cube", which i found somewhere in this forum but i dint find the results more attractive and moreover my phone has become slower than ever before. Is there any way to revert back to the previous version cause i am unable to install the ROM you have suggested in the link above??? It says that the image is corrupted. Please help me out.
Thanks
Click to expand...
Click to collapse
I didn't sugested any ROM.
You can't revert to your old ROM. There isn't any shipped ROM from P3350.
Flash other ROM that you like.
Hi,
While trying to install the ROM available here "http://forum.xda-developers.com/showthread.php?t=378535", it returns with an error saying "Image Corrupted" once it reaches the 3% mark. What du i du???? Please HELP...
Thanks,
XDA Taher said:
Hi,
While trying to install the ROM available here "http://forum.xda-developers.com/showthread.php?t=378535", it returns with an error saying "Image Corrupted" once it reaches the 3% mark. What du i du???? Please HELP...
Thanks,
Click to expand...
Click to collapse
I faced the same proble....Only solution u have to flash back to your own factory rom first before trying anything else.....
try to find in this....http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
Thanks for the timely reply.
I have now installed "achilles_ROM_ver_3_YouTube" and works pretty nice, but the problem now is that i am unable to send or receive files via bluetooth, any suggestions?
Thanks.
Hi
First of all, sorry for my bad english.
I've got a problem with my hermes. It is totally unstable. Sometimes, the screen is getting darker and the hermes don't accept any input. Other times, the screen shows a grey screen...
I've made a update to the newest original german rom (win6.1), and i've also tested a rom with win6.5. The problems appeard in both versions.
PS: the update processes also stucks at 100% and the PC shows a update error(262). But the rom starts after removing the battery
Can you help me?
****ingbull86 said:
Hi
First of all, sorry for my bad english.
I've got a problem with my hermes. It is totally unstable. Sometimes, the screen is getting darker and the hermes don't accept any input. Other times, the screen shows a grey screen...
I've made a update to the newest original german rom (win6.1), and i've also tested a rom with win6.5. The problems appeard in both versions.
PS: the update processes also stucks at 100% and the PC shows a update error(262). But the rom starts after removing the battery
Can you help me?
Click to expand...
Click to collapse
Try a hard reset, and if that does not work try flashing the ROM from the SD card...http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
Good luck.
Thank you JR_de. i knew i was forgetting something. =)
Flash the stripped shipped ATT ROM before you flash a custom ROM.
http://www.4shared.com/file/61372397/e2bf76c0/official_ATT_WM6_striped.html
Just flash your device with new ROM.
Me too. Everytime when coocked new rom I have problem - the tom is totally unstable. I've tried everthing but problem is here again. Hermes is 6 months old. Please give some idea for this problem. Thnx....
Ouch - after trying to SSPL my phone, it doesn't boot anymore. It's a T-Mobile branded Leo which doesnt allow to flash original HTC ROMs.
Now I need to try a T-Mob version. Anybody Can provide one ?
Thanks !
have you tried downloading an official rom from HTC with your phone's serial number?
http://www.htc.com/europe/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Thanks for the tip, but: Sorry, this software download is not suitable for your device.
Anyone who has a T-Mob ROM from somewhere ?
Thanks!
try a gold card solution...i also got a t-mobile hd2 i sued gold card to upto 1.6 rom...its working good...
Hello Matmax,
I had the same Problem, but you can try a Hardreset.
Turn your LEO off ( Battery out and in)
Press Volume up and down together
and turn HD2 on.
I had to try several times.
There is no official T-Mobile ROM to download.
New T-Mobile ROM comes out next week in Germany (They said)
http://www.t-mobile.de/meinhandy/1,14091,19349-_,00.html
Regads
Hammermade
http://rapidshare.com/files/3253914...dio_Signed_15.26.50.07U_2.04.50.22_2_Ship.exe
UK T-Mobile rom I saw posted last week.
So, flashing roms using sspl does not work with this type of t mobile branded leo?
For me it seems so :-(
I tried several hard resets, doesn't help. Thnanks also for the UK stock ROM, but that gives me another INVALID VENDER ID
Matmax said:
For me it seems so :-(
I tried several hard resets, doesn't help. Thnanks also for the UK stock ROM, but that gives me another INVALID VENDER ID
Click to expand...
Click to collapse
i think u must post ur problem in sticked Bepe thread, may he has the help.
Auch!! I am also searching for a suitable T mobile rom (UK) for my leo, but could't find any, yet...
P.S.:I planned to flash another rom using new sspl, but after reading your post I think I will wait a bit more... (If someone would not give a different feedback...)
I think your best bet is to go for the GoldCard method, although it would be nice if someone could host the T-Mobile rom on a site other than rapidshare.
GC method worked on my UK T-Mobile HD2...
0Reefa said:
I think your best bet is to go for the GoldCard method, although it would be nice if someone could host the T-Mobile rom on a site other than rapidshare.
GC method worked on my UK T-Mobile HD2...
Click to expand...
Click to collapse
Thanks for the tipp, but with a dead phone, Goldcard doesn'T help much
Matmax said:
Thanks for the tipp, but with a dead phone, Goldcard doesn'T help much
Click to expand...
Click to collapse
Post in the Bepe thread or PM him for help. Either way it would be useful for all of us to understand from him and you what went wrong and to fix it so other people don't have the same problem.
WB
Can you get to the boot loader screen? Pressing down on vol and powering on...?
0Reefa said:
Can you get to the boot loader screen? Pressing down on vol and powering on...?
Click to expand...
Click to collapse
Yes - but don't have a ROM I can flash (T-Mobile Germany).
Hard reset - works fine
Boot loader - works fine
Boot - stops after the versions of radio etc. is shown (red numbers on black screen)
Cavallipurosangue said:
Auch!! I am also searching for a suitable T mobile rom (UK) for my leo, but could't find any, yet...
P.S.:I planned to flash another rom using new sspl, but after reading your post I think I will wait a bit more... (If someone would not give a different feedback...)
Click to expand...
Click to collapse
I have T-mobile HD2 and sspl works fine. I am on my 3rd rom now.
T-MOBILE USA
http://www.actualitemobile.com/forum/index.php/topic,13335.msg214232.html#msg214232
Matmax said:
Yes - but don't have a ROM I can flash (T-Mobile Germany).
Hard reset - works fine
Boot loader - works fine
Boot - stops after the versions of radio etc. is shown (red numbers on black screen)
Click to expand...
Click to collapse
Hi
Re try Using SSPL and the custom rom it will flash from boot loader.
I had the problem first time using SSPL it crashes and stayed at bootloader. Every time fails You disconnect the cable and reconnect, Then re tried several time running SSPL with IT2 rom and 3rd or fourth attempt it worked. If not UK 1.48 version will work on T mobile uk.
Good luck
T-Mobile UK ROM
Hi try downloading this one from my 4Shared account. I don't think that it's the fastest link but it may help you out of a hole....
http://www.4shared.com/file/183376263/fc9b664b/RUU_Leo_TMO_UK_1431102_Radio_S.html
I too have a T-Mobile HD2 and was about to flash the new Miri ROM until I saw your post. Now a tad nervous about doing so......
Mat, before you tried to SSPL flash your Leo did you have a stock T-Mob rom or had you already GoldCarded to a new release rom?