Related
Hi there,
MS Outlook on my desktop PC has all my contacts in +44 format (for some reason). Now I've synced my Trinity up, the contacts have transferred over in this format. When I try to dial the number the call doesn't connect. Instead T-Mobile thinks I am using keypad codes to toggle my voicemail.
I guess my questions are:
1. Is there a simple change I can make on the handset for it to accept +44 contacts? Or do I need to change them all back to 01753 etc.
2. If I *do* need to change them all back, will I be able to make international calls when I eventually make it abroad with this device? Or will I have to change back to +44.
3. Finally, if I'm abroad and use skype in a WLAN hotspot, will I need to use +44 or the regular UK dialling codes, say 01753?
Many thanks!
Ermmm it should "just work" tm.........
You havent accidentally added a 0 after the +44?
ie 01652 becomes +441652 and NOT +4401652
otherwise in windows have you checked you have set an area code anywhere? IIRC in the dialup section type thingy.
IF you change tham all to 01 etc then when you go abroad you need to drop the 0 and add +44
No idea about Skype
Personally all my contacts are a mixture of +44 or 01's depending whether I want to call them fom abroad or not and dont ever have an issue dialing them.
But hope the above is a little helpful
hi,
you're right. they all have a 0 after the 44. Outlook did this so i'm hoping it's fairly easy to remove them all as a global change.
thanks for helping me out.
at home now sitting in front of my pc.
can i get it to work?
no i cant.
outlook won't delete the first zero, ie (0)1753
the help section is a joke.
can anyone help please?
TIA
it seems that outlook on the pc is sensible enough to know to know if a number is dialled, the first zero is auto dropped.
but this is not the case with the handset. it will try and dial whatever numbers are in the contact fields (i think).
note: my handset is working. if i delete the preceeding +44, the number is called.
i've tried searching this site's for answers but to no avail.
has anyone else had this problem?
cheers
i'm either incredibly thick or MS office dont consult with MS Mobile.
sorry for multiple posts!
Remove all dialling rules and save all numbers using +44 xxxxyyyyyyyy. That's what I have done long time ago and it works fine. It also helps to deal with Italian numbers where you need to leave the 0 in when calling a fixed network number.
PS: I think you need to go through the manual editing process though
Thanks for the info. However I need to have my hand held with this.
"Remove all dialling rules"
Is this on my Desktop PC outlook or on the handset?
"save all numbers using +44 xxxxyyyyyyyy"
Have I got to re-enter every number on the Desktop PC outlook?
And do I include the first zero or leave it blank?
CHeers!
powerbook said:
Thanks for the info. However I need to have my hand held with this.
"Remove all dialling rules"
Is this on my Desktop PC outlook or on the handset?
"save all numbers using +44 xxxxyyyyyyyy"
Have I got to re-enter every number on the Desktop PC outlook?
And do I include the first zero or leave it blank?
CHeers!
Click to expand...
Click to collapse
On the handheld: go to the Settings, Connections, Advanced, Dialing Rules and make sure "use dialing rules" is not selected.
Then go to Outlook on your PC and remove all zeros and all brackets from all numbers; put the numbers the same way you would dial them on the phone keypad (when calling from abroad). You don't need to re-enter all numbers, you need to edit them, which is just slightly less boring I am afraid.
Ops.... Are you also using your PC connected to a land line modem to dial numbers? I hope not because in that case it would not work as you cannot dial a "+" from a land line!
powerbook said:
3. Finally, if I'm abroad and use skype in a WLAN hotspot, will I need to use +44 or the regular UK dialling codes, say 01753?
Click to expand...
Click to collapse
Oh this is easy! On Skype you always need country codes.
Does anyone know if there is a reg hack for selecting contacts with no phone numbers from the smart dialer in WM6. I would be totally happy with the search feature if I could search all of my contacts. I use my contacts as a means of organizing lots of information and many entries do not have phone numbers and are therefore not searchable via this interface.
Does anyone know where in the registry this is possible or if it is even possible to do? This would be the fastest most effective way to select a contact if we could correct this issue.
32str8 said:
Does anyone know if there is a reg hack for selecting contacts with no phone numbers from the smart dialer in WM6. I would be totally happy with the search feature if I could search all of my contacts. I use my contacts as a means of organizing lots of information and many entries do not have phone numbers and are therefore not searchable via this interface.
Click to expand...
Click to collapse
Use EZDial by MESoftware.
www.MESoftware.biz
Nadavi
Just tried it and ezdialer does NOT find contacts with no phone numbers. I currently use pocketCM and it works quite well but still lacking some features that I require. Ideally the reg hack if possible would solve all issues until pocketCM is fully functional.
You guys are my last hope before I update my phone and give this one to my sister. I am still searching for a the reg hack that will enable me to use the smart dialer to view contacts that have no phone #'s. Anyone
i buy HTC TOUCH HD and i snyc contacts with outlook but in my phone they are sort by last name i use address book by first name in nokia and i want to have it here how to sort contacts by first name
please help
why this phone need so much time to recive call
first screen is on, then after the sec vibrate is on, then after that ringtone, and when i scroll to answer almost second after i can hear other party
Shubaroo contact changer. Haven't tested myself on Touch HD, but worked well with my previous WM6 device.
http://www.shubaroo.com/index.php?module=contact
Download 'HD tweak' to tweak the registry settings for shorter delay before phone rings etc.
pasko1234 said:
i buy HTC TOUCH HD and i snyc contacts with outlook but in my phone they are sort by last name i use address book by first name in nokia and i want to have it here how to sort contacts by first name
please help
why this phone need so much time to recive call
first screen is on, then after the sec vibrate is on, then after that ringtone, and when i scroll to answer almost second after i can hear other party
Click to expand...
Click to collapse
to sort using "firstname, last name" FOR ALL CONTACTS you would need to do so in Desktop's Outlook. i dont' think mobile outlook (aka contacts) have this option, unless you want to do ONE BY ONE. I haven't tried this, because I always use "last name, first name"
as for the delay in answering call, the previous poster is right, install HD Tweak, and you can modify the delay in answer calls. it works quite well. also the slider to answer/ignore the call is a little buggy, it lags when you try to slide while the phone is ringing. i would suggest S2U2's slider, it is very lean and fast.
This how you do it to be First Last name however it is quite boring because you have to do it to each entry in your contacts list on your HD.
1- On your touchFlo3D People tab select “All People”
2- The first contact well be highlighted in green hit “Menu” then “Edit”
3- Change the “File as” entry to be First Last name.
Now the contact item will be stored and listed as First Last name.
You can see why I said it is boring because you have to do it for your contacts one by one.
I hope this is what you wanted
amuneer said:
Shubaroo contact changer. Haven't tested myself on Touch HD, but worked well with my previous WM6 device.
http://www.shubaroo.com/index.php?module=contact
Download 'HD tweak' to tweak the registry settings for shorter delay before phone rings etc.
Click to expand...
Click to collapse
I tried the contact changer, it doesn't work on blackstone....
I have a question...how can i add contacst from my pc,originally from nokia the are all .vcf and i dont know how to put it on my blackstone..please can u help me? thanks a lot
its so hard to answer me???
homola said:
its so hard to answer me???
Click to expand...
Click to collapse
the answer was written in previous posts.
outlook can do that
Hi - I've only had the HD a few weeks and of all the things I've seen on this forum, the only really niggling thing I've found with the standard install on my HD is the contacts issue mentioned in this thread. I'm sync-ing all my calendar, mail and contacts with Lotus Notes (using Lotus Notes Traveller). In Lotus Notes I have got all the contacts entered with their first names and last names, but then in the options I have selected "firstname lastname" as the view style. I am amazed that Windows mobile doesn't have this option?
If I WERE to go through every single contact entry and change the "file as" to the right format, would this synchronise back to Lotus Notes and cause any problems? Or is it just a setting on the device itself? Is there no global device setting to change the view style?
homola said:
its so hard to answer me???
Click to expand...
Click to collapse
I made a post about this yesterday.
I have the same frustration and created my own program to fix the contacts, even allowing for your own custom formats and using the Company Name field. I hope you find it helpful!
http://wargolet.com/wm6/
Guys,
I've posted this before but nobody has helped me yet.
Basically put I have a couple of contacts for which I have more than one contact number (home, Mobile etc..)
Anyway, when i receive a call from one of these contacts, the name is not resolved, the picture is not shown and the custom ringtone I have chosen (all by vanilla stock rom means) does not ring!!
I have seen this happen with "Exact" matches to contacts in my Contacts list and also if I have entered the number as "+447760....." instead of using the default "07760...." prefix for UK mobile numbers (as I'm abroad a lot so need to use that to dial them) it also refuses to recognise that they are in fact the same number - something my Artemis did without an issue.
Please help me resolve this - it's ruining my HD experience!
Thanks
21 views and no replies - come on guys please - going on a trip tomorrow and I need this to be sorted if poss - doing my head in!!
I had exactly the same problem on my X1, which I have now sold so I could get a HD. I was on o2 uk using itje's 5.061 rom. What network are you on and which rom and what software have you installed? maybe something we both installed is causing the problem
Right, I'm on a stock rom on an unbranded Touch HHD on the Vodafone network. Programs I've installed are as follows:
Changscreen,
HDTweak
Advanced Config
S K Tools
Battlog
Fingerkeyboard
Resco file Explorer
Very strange - it might have happened since I restored a backup but I doubt it.
Try reducing Phone>Call ID match number in Advanced Config.
I have similar problem... Just installed dutty 3.0X and when i sinchronized all my contacts become duplicated, so i deleted manual only the first ones. And now when someone from the contacts is ringing i dont get picture or his name and I am sure that i have the same number in the contact list. Odd
Anyone have any other ideas about this? Still causing me some considerable pain - I seem to recall it started after I started to reconcile the outlook contacts with my PC - this may have caused a different contact ID (or something?)
same problem and no solutoin... :-(
i managed to fix this by reassigning the phone numbers to the contacts page. It seems to occur when you use 3rd party contact management apps before you have assigned numbers.
Works fine now
mslookout inserts spaces into phone number, and prolly phone cannot recognise incoming number having spaces in phonebook?
I also cant fix it by changing CallIDMatch in the registry. It's bizarre as I have 2 contacts in my favourites: both are now set to No's starting with '0' yet when one texts me, their name shows and when the other does, their number shows. hard and soft resets have also failed to resolve this, HTC helpdesk no use at all, also logged with Windows helpdesk in case it is a microsoft, not htc, problem.
Am keen for other things to try, open to suggestions....
Am disappinted and amazed that what is otherwise a great phone, can't do what cheap cr*ppy phones, can , ie show the name of the person calling or texting.
Have you tried using Advanced Config and increasing Call ID match to 9 or 10?
No caller name when receiving Incoming Call
This may be an old thread, but sometimes the newer ROMs also have the same problem.
This happened to me after updating my from from WM 6.1 to WEH 6.5.3. So, I am updating this thread on how I resolved my problem.
Step 1. Edit the Registry and change the CallIDMatch value to 7 (the original value was 10).
Code:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallIDMatch"=dword:00000007
Step 2. Soft Reset (power off and restart)
Before I did this, I needed to copy my contacts from SIM to the Outlook Contacts list, so in my Contacts list, I have "double view" of both lists on the same screen - frustrating.
After this change of the Registry key value, I erased all my contacts from the Outlook Contacts list (use the Hide Sim Contacts function) because I prefer to have my default contacts to be from the SIM card instead of the Outlook Contacts. This way, I can be assured that all newer contacts will be stored on the SIM card and I do not have to worry about losing contacts if I change phones.
hello,
when someone calls my diamond II
it only shows the number of the caller, but not the name even though they are in my contacts how can i change this so it says who calles by name instead of number..
thanks for any reply
This sometimes happen if you have multiple entries of the same number....then phone shows only number and no name.....Is this happening for each incoming call..or just for few contacts...
for all contacts it happens, but most do have an mobile number and an home number..
can i change anything to fix it? or is it a fault on the diomand II .
Multiple numbers for same contact should not be a problem, but multiple contacts for the same number sometimes causes this....fr me it is working fine, so it should not be a TD2 bug..
pgu said:
Multiple numbers for same contact should not be a problem, but multiple contacts for the same number sometimes causes this....fr me it is working fine, so it should not be a TD2 bug..
Click to expand...
Click to collapse
all contacts have just one mobile number and one home number so i don't know where to search a solution
but thanks for your reply
Try to not use the prefix.
(+countrycode)
Should do the trick
this was discusserd once already (I think. I can recall the drop the prefix solution). Search a bit. alas, I will give you a link if I find one
Im having a similar problem. The caller id dosent work for some of my contacts, both when they phone me or when they send a SMS. Im sure they are saved in my phone and not on my sim and from what I can see there isn´t any difference from how they are saved in my phone book from the ones that the caller id works for. Its really strange and annoying. Hope someone has a solution for this problem.
Did you try just delete that contact and make it again. I know it's stupid question but ...
prdic said:
Did you try just delete that contact and make it again. I know it's stupid question but ...
Click to expand...
Click to collapse
yes i did. I also tested to make a new contact from the sms view with the option save contact with the actual number that shows instead of the name and it still didnt work. Thanks anyway.
Hey,
I've had the same problem since day of purchase. I did the reg edit to increase the numbers the phone looks at to identify a number but it still didn't work. I've also deleted and re-created the contacts with no success.
ALL,
I had this problem. I submitted the case to HTC Europe but I did not even get a call back after a few months had passed.
Unfortunately the only way to do this is to hard reset the phone.
You will loose all your phone data (contacts etc) but the files on your memory card will be ok.
When you reset the phone, even if you have NO contacts at all on your sim card, you still have to tell the wizard on the first boot to import your SIM contacts. This, for some silly reason, is the only way to get the phone to register the phone contacts from your phonebook, even if you are just using the non-SIM contacts.
I had no numbers on my SIM card and of course I did not select the option to import my contacts. I was going to do that myself via Outlook. Once I selected not to import the contacts, not one number was recognized.
I did a Hard Rest. If you have numbers or not on your SIM does not matter. Allow the initial start-up wizard to import from the SIM. Then continue.
This solved this VERY ANNOYING issue for me. I used SPB backup first to take a copy of my phone data before the reset.
- Geoff
i had this problem too, solution is change registry:
HKCU\ControlPanel\Phone\CallIDMatch:9(DWORD)
this means phone will identify number by 9 last digits - meaning its ignoring country code.
*if 9 not working for you try 10/11/12... one of these should fix.
bnm7bnm said:
i had this problem too, solution is change registry:
HKCU\ControlPanel\Phone\CallIDMatch:9(DWORD)
this means phone will identify number by 9 last digits - meaning its ignoring country code.
*if 9 not working for you try 10/11/12... one of these should fix.
Click to expand...
Click to collapse
hello
today I tried all the numbers, from 7 to 12
11 was the value that made me look some of my callerID. now I have the same problem, but not with everybody, but only some people
let's say a 50% of my contacts are shown on the screen when they are calling me/sending me an sms, but the other 50% doesn't show me the name but just the number.
today I tried with my mom's phone to call me. it didn't show the name. So i deleted her name from the contact, and added it again (from the missing call). now it's showing her name... Do I have to do it with all the phonebook?
is there something I can do to fix it? it's making me crazy
please help me..
I have, absolutely same problem, erasing the contact and creating it again, did not solve, very very strange. I've tried iterchange of numbers home>work, work>home, work> auto, home > auto, invane, some of contacts refuse to display name, compared the phones i have no same numbers for names ecc. First of all i have to mention that numbers have been migrated from Nokia 6230i via Outlook Express > Outlook > Phone , some of the numbers like Home, Bussiness Fax ecc, did not passed to Diamond 2
I've just noticed that a Hotfix was released a few days ago, which just might solve this problem.
Titled: Update for HTC Touch Diamond2 for Caller ID Display
I haven't tested it yet, so let us know if it works for anyone
try to make all contacts same format with TrineFix or similar app,
set numbers without country code, for example in israel i set 05XXXXXXXX instead of +9725XXXXXXXX, then i change CallIDMatch to 8.
this is how it works for me.
I had a problem with none of my contacts names coming up when they called me, it would only show their number. After x2 software resets and installing everything again I found the problem, when you do a software reset and you turn the phone on for the first time when it asks you to import from your sim card contacts DONT DO THIS if you sync your phone with Active Sync and outlook contacts as this is where the problem is.
If you import your contacts from your sim and you sync with outlook then your caller id's will not work.