[email protected],
I searching a possibility to use FTouchSL with the RealVGA Software (because FTouchSL doesn't work with the realvga hack) or an other solution to slide the menus with the fingers...
Can anybody help me with this problem?
Is there any other solution?
Best Regards SavageDeath
It works.... or works it not?
[email protected],
after some tests I get a solution. RealVGA+ FTouchSl work only when the german language pack of RealVGA isn't installed....? I don't know why...
Now there is a problem with RealVGA because of missing files, but it works altough?
The other problem: FTouchSL doesn't load at a reset (there is a message like "not the right certificate" oder something like that)... but after manual start of FTouchSL it works...?
Have anybody some experience about this problems?
Best Regards SavageDeath!
??
Does nobody knowbody know something about FtouchSL and RealVGA?
Best Regards SavageDeath
Related
Hi
I succeeded to install PN on JJ but the two menu screen are HUGE
Ther should be a way (something to do with OZVGA) to make those 2 screen normal
Anyone ?
Raphael
use Tweaks2k2 to force the Destinator to start in VGA mode (VGA brute force option) this will solve your problem.
Wolfgang
Universal and destinator
I have uses tweaks2k2 to brute force vga and certainly it has made destinator very usable. However, fonts on the main screen are quite small and the bar that is meant to be at the bottom is in the middle of the screen. Also the zoom slide is not on the right hand side. Overall it is as if one cannot zoom in as much as you can when it is working perfectly.
Has anyone overcome these problems? Is it the case that with ozVga these could be overcome?
Thanks, apap
apap,
you have to change the file Destinator.inf (located in \DestinatorApps\Destinator\Common\Interface\Visual\All\)
I'll attach the file I'm using. Be aware it's for VGA mode and only in Landscape mode.
Just give it a try.
Wolfgang
Please reńame the file to Destinator.inf
Wolfgang thanx,
I tried your inf file. It did put the bar closer to the bottom. However, the font remain small and I cannot find the buttons or scroll bar. Any suggestions?
apap
Well I have a suggestion because I had exactly the same problem:
Actually,without any VGA hack,the only thing you cannot do is access a few options in the main menu,options etc...
SO what I have done is switching to VGA mode ,changing the options I need and then switching back to normal mode where screen is Okay and the main options (adress,poi,contacts) are accesible for current work.
Thanks, I will try this, but the problem tha I remember having in non-VGA mode is that when I turn to the page for inputting addresses and accessing other settings the buttons are huge. Anyway, I will try this and get back to you.
Cheers, apap
It works! Thanks again. Keep us posted on any new developments.
Guys
Here's a link to a german patch for destinator.
When you install it fixes the layout problems but also installs a german cab file.
If you then run the updated program it does run in german but you can change the language back to english.
Enjoy!!
http://www.destinatoreurope.com/de/cm/db/de2_0504_liste/DestinatorPN_Patch_WM5_DE.zip
Well I tried this German patch and now I have Huge German buttons
Personally I preferred the english huge buttons.... :lol:
numanoids said:
Guys
Here's a link to a german patch for destinator.
When you install it fixes the layout problems but also installs a german cab file.
If you then run the updated program it does run in german but you can change the language back to english.
Enjoy!!
http://www.destinatoreurope.com/de/cm/db/de2_0504_liste/DestinatorPN_Patch_WM5_DE.zip
Click to expand...
Click to collapse
The path is dead. Can anyone please upload it ?
EN version of WM5 Destinator patch!
Not sure if people have seen this, but you could try http://www.destinatortechnologies.com/en_US/support/faqs/destinatorpn.html#Install5
I haven't yet because my version installed first time - haven't tried BT yet - GPS arrives soon!
Adam
Hi,
I have Qtek 9000 (htc universal) and I would like
to use TrueVGA mod.So, my question is, which
soft to use: OzVGA or MvRTrueVGA
Which software is stable, and most programs are
working well with this?
Of course, does this softwares have possibility
to back into qvga mode?
thanx
Tell me too..if anyone knows??
Tell me too..if anyone knows??
Quote: "The reason to use OzVGA over RealVGA? Easy:
RealVGA doesn't work on WM5. OzVGA does"
I would recommend Oz if you have wm5 and realvga if you have wm6.1
I used realvga with no problems
Don´t forget to vote!
Exists some type of touchflo for magician?
thats what i was wondering about
I use icontacts and it allows you to scroll through you contacts by sliding your finger - very impressive, I dont know if its a big deal to make it work everywhere on windows mobile.
So if anyone knows how to do it - 'd be great.
If you try to install touchflo (you can get the cab in this forum) it says that touch.dll is required - i dont think that you can just copy the wm5 file into your win folder to make it work
I have proven icontacts and is very good!!!! Thanks!!!!touchflo at the moment i not seen any that works and the one that your you say not I have seen it. Somebody knows of which it works?
basauri said:
Exists some type of touchflo for magician?
Click to expand...
Click to collapse
Touchflo only works on WM6
IS there some genius who can make it work on WM2003SE devices??the cube thumb movement is just awesome..
Plz anyone can make it work??
I am desperately looking for a (working!) method to use another keyboard (like the good cootek touchpal keyboard) on my HTC P3600 (WM5). I tried the software IMSelector as well as SIPChange but it works only a few times!I reboot many times but I always keep the default keyboard...
Can someone help me?
Thanks in advance
I'm not sure about free software but I use SKTools and it get me the correct keyboard all the time.
I've got SKTools !
But how to use it?
Hi,
I have an identical problem with the TouchPad or TouchKeyboard installed on my P3600. I've found that removing some of the object on the Today screen help TouchPad to start. So today, i've only a few items (messaging and SBP Diary) on my Today screen.
I also wait a little bit before entering my pin code for the phone until i see touchpad started (it shows the keyboard for a few seconds).
Since then, i "don't" have so much problems.
Ced
Thanks for your help!
what about the pocketcm keyboard?
www.pocketcm.com
i use this on my p3600 (wm6) and it works well.
I already used it but I had the same problem as the touchpal keyboard
nicus said:
what about the pocketcm keyboard?
www.pocketcm.com
i use this on my p3600 (wm6) and it works well.
Click to expand...
Click to collapse
you say you have p3600 with wm6 !?
I've asked htc to know if there is an upgrade to wm6 and they said NO !
how can upgrade my p3600 to wm6?
I'm french, so i want if it's possible an upgrade in french ...
Thank's for your respons
Alternate SIPs not showing up is a well discussed problem in the Trinity forum, having just reinstalled everything on my own Trinity it seems that it is memory related, once the free RAM is below about half then alternate SIPs tend to be reluctant to work reliably.
I wish to add these to a ROM, however I'm unable to find a VGA compatible action screen, although I know that it is cooked into the AP ROMS.
Does anyone have the .cab?
Also I wish to install the touch diamond keypad. I love it, however I wish to use it with Opera Mobie 9.5 and I found that when installing the QVGA version onto my kaiser both of the downloadable keypads I tested did not display any letters or numbers from within Opera - for example in the google searchbar -the only one that did was cooked into the Dutty Diamond V1 ROM.
I am awaiting a Toshiba Portege g900 that I got dirt cheap and this keypad would make the world of difference to me. I have found one re-scaled vga keypad - can anyone confirm that this works well with Opera Mobile 9.5?
Kind regards in advance.