Database Users

Cost of Screen Replacement?

Hey fellas... I think this is my first post here. Been here so long I don't even remember.
Well I have a K-JAM... I made a mistake of not buying a screen protector at the shop. It's been about 3 months now and depite very careful usage, there are quite a few scratches on the screen. I was wondering how much it would cost to replace it.
Do I have to replace the entire screen or is there some kind of sheath over it that can be replaced hence minimizing the cost?
Any inputs would be appreciated.
Thanks

Do a search on Ebay, there's a few listed there. Seems that just the touchscreen (top part, the one you probably want) is around $35, touchscreen+LCD is around $130.
I did a screen replacement on my previous phone, a SonyEricsson P800. The replacement itself was fairly easy (I replaced both touchscreen+LCD since the LCD was busted), but the touchscreen and LCD on that one were glued together forming one solid piece. Although seperate touchscreens were available for the P800 as well, there would've been no way for me to seperate it from the LCD without breaking the latter. It might be the same case for the K-Jam, forcing you to opt for the more expensive option. You'll just have to check first.
Also, have a look at the Service manual for more information, also about (dis-)assembling the K-Jam.
Goodluck!

Depending upon the depth of scratch, have you tried a repair fluid and polisher?
There is a website in the UK www.mobilefun.co.uk that sell just a solution! No pun intended. For a few pounds it might be worth a try (or dollars depending on where you buy!)

Wow... thats fantastic... I hope it works... the Repair fluid that is.
@Juicey... I cheked it up.... but like most screens, this one seems to have the touchscreen sheath glued hard to it. So i guess that's out of the question.
@BMS_Ian... has anybody around here actually had any luck with these repair fluids?

EVO digitizer on HD2, is this possible?

There was some talk about the buttons on the HD2 going bad due to much use on android ROM. Was wondering if Evo digitizer will fit/work on HD2? That would get rid of the possibility of buttons going bad.

To engineer that would be SIGNIFICANTLY harder than just buying the part for the buttons on the HD2 and installing it. Phone parts are not interchangable and if you've ever opened one up you would know the answer to your own question. The talk about button problems on the HD2 is over exaggerated. First you don't know what the people are doing that are starting those discussions - how hard are they with their phones, etc. The keys in most phones are pressure contact switches - they are designed to perform for years of normal use not used by a gorilla or someone who isn't exercisiing care.
I've owned HTC phones like the TYTN I for a number of years and used the hard keys - very similar contact switches - never a problem. The same for the 2125 which was a Windows phone with hard keys only. They were very small and I used the phone for two years every day. Keys did not wear out and they felt about the same as when I bought it.
Don't worry about it for at least two years of general use. Even when using Android you can get widgets that mimic soft keys (ie. the back/windows key).

Stim, thanks for your thoughts. I purchased a HD2 with a broken digitizer and replaced it so was wondering if the digitizer on the EVO would work since they are the same size. I did get a chance yesterday to see a pic on the internet for the EVO digitizer and the ribbon on the EVO for the capacitive buttons and digitizer does not look compatible size wise on the HD2.
I've never had buttons go out on any of my phones before. With all the talk of the buttons going bad I thought maybe it was a quality issue with the HD2.

wendellc said:
There was some talk about the buttons on the HD2 going bad due to much use on android ROM. Was wondering if Evo digitizer will fit/work on HD2? That would get rid of the possibility of buttons going bad.
Click to expand...
Click to collapse
I might be completely stupid here, but what does the screen/digitizer have to do with hardware buttons?
I thought the digitizer is just the touch sensor of the screen, and that the hardware buttons have their own button pads/switches (whatever they're called).
Now, if you were talking about capacitive "hardware" buttons (such as the ones found on many Android devices, like the Nexus1), I can see how the digitizer would come into play.

while on subject of digitizer of hd2, does anyone know how to replace it?
I recently dropped my phone on the ground and even though i had a scratch resistant film over it i broke the glass digitizer, phone digitizer work 100 fine but i would like to replace it, honestly i got lucky that i did not damage the lcd screen under the digitizer, i have priced replace ment part at about 60 with tools to fix it, i would just like advise to get repairs done

Actually you aren't so lucky. There are plenty of threads on this issue. Replacing the digitizer and lcd as separate components is nearly impossible without damaging the lcd. Hate to be the bearer of bad news. Separating the glass from the LCD is nearly impossible. They are glued together and air sealed. Some have tried and failed by either destroying the lcd or making the phone inoperable. HTC either heat seals the two together or uses a special adhesive. In either case unless you are working in a class clean room (no dust) getting specs, skin or hair more than likely and you will be really ticked off to find that crap in there when you go and turn the phone on. Mike Channon's website used to post official (semi) HTC maintenance guides but the HD2 hasn't been posted. There are however a couple of Russian links that go through the process. The HTC guides were much better and they listed the steps, torx settings, oven temps etc..
I've seen a few on eBay - new but there seems to be some that need to be soldered and others that don't.
My suggestion is buy a complete unit if you have to or sell it damaged on eBay and get another phone.

i can also buy a lcd and digitizer together to eliminate the hassel of having to seperate them, and install componients like that, only downer is prices avererage 100-120 dollars, would that be a good option? i have seen videos on youtube on how to go about replacement, im quite knowledgeable about wire work and sodering but do u think im getting in over my head by tring to do this repair?

i know buying a used hd2 is about 575 and it only goes up from there, i just dont have that kind of cash right now, plus my phone is unlocked, has hard spl, running nand android flashed directly to phone, with att service fully working, something very few owners have accomplished with there hd2's..

Some searches...
Digitizer:
http://www.amazon.com/Original-Digitizer-HTC-HD2-Replacement/dp/B001V7W3M4
Housing + Display + Digitizer + Battery Package
http://www.amazon.com/FACEPLATE-TOUCHSCREEN-DIGITIZER-REPLACEMENT-HTC/dp/B004FE1FLU
I notice the hardware buttons are not included. My phone is fine except the hardware buttons were scratched up after suffering a hard fall.

I don't know. I've done complete overhauls on TYTN I and TYTN II's. They didn't require heating to remove the panels - they just snapped in. Phones were very modular no work involved except screw removal. The latest phones seem to be held together with some sort of adhesive. I remember looking at how to disassemble a FUZE. Major pain to remove the screen from the keypad - required an oven to melt the glue.
Look for a complete quide that shows step by step disassembly AND assembly. Sometimes they forget the tricks to put it back together and you get messed up.
The 150 for the housing seems a little steep. But most of the LCD/DIGITIZERS are at least 100. Be careful about some of the parts they are stripped from a "working" phone - doubt it - why would someone take a perfectly good phone and break it apart for the parts? Doesn't make sense - they can get more money for the complete unit. Sounds like they were defects or seconds - screens may have dead pixels or spots. I'd look for factory fresh new stuff personally. You can buy the keypad/keys separately on eBay for next to nothing.

stim141 said:
I don't know. I've done complete overhauls on TYTN I and TYTN II's. They didn't require heating to remove the panels - they just snapped in.
Click to expand...
Click to collapse
The digitizer is the glass that you touch when operating the phone. The LCD panel is the part that shows the pictures. The digitizer covers the LCD and both are sealed together. The TYTN series of phones did not have this.
The OP was concerned about replacing the digitizer without harming the LCD. I know from experience that this is very hard to do. I managed to get them apart and replaced the digitizer on my HD2, only to damage a single line in the LCD when I re-assembled the phone. It was a complete waste of time and money.
stim141 said:
The 150 for the housing seems a little steep. But most of the LCD/DIGITIZERS are at least 100. Be careful about some of the parts they are stripped from a "working" phone - doubt it - why would someone take a perfectly good phone and break it apart for the parts? Doesn't make sense - they can get more money for the complete unit. Sounds like they were defects or seconds - screens may have dead pixels or spots. I'd look for factory fresh new stuff personally. You can buy the keypad/keys separately on eBay for next to nothing.
Click to expand...
Click to collapse
Actually, the housings sold 3rd party are usually factory fresh, unless specified otherwise. HTC expects to have techs replace various parts of the phones and ordered a certain percentage of these types of parts. When the initial sell drive dies down, the excess is unloaded to 3rd parties who either offer them up on sites like eBay or catalog them for companies that repair phones.

well like i was saying would it be easyer to buy both the digitizer and lcd already together and just replace the ones in my phone?

Advice: Upgrade or repair

Hey guys
Ive had my nexus 4 for a while now, bought it when it came out a few years ago now. I had managed to keep it perfectly unharmed until i unfortunately dropped it the other day which cracked the screen and seemed to have killed the touchscreen.
The touchscreen now just doesn't work at all.
So my question was, do you reckon i should buy one of those screen repair kits, or something similar and attempt to fix the phone or go for an upgrade and try my luck finding a invite ticket and buying a OnePlus One? Just wondering what your opinions are.
Im stuck now with an iPhone 3gs! Tough times indeed.

lewis03 said:
Hey guys
Ive had my nexus 4 for a while now, bought it when it came out a few years ago now. I had managed to keep it perfectly unharmed until i unfortunately dropped it the other day which cracked the screen and seemed to have killed the touchscreen.
The touchscreen now just doesn't work at all.
So my question was, do you reckon i should buy one of those screen repair kits, or something similar and attempt to fix the phone or go for an upgrade and try my luck finding a invite ticket and buying a OnePlus One? Just wondering what your opinions are.
Click to expand...
Click to collapse
Replacing the screen assembly is actually relatively easy on the Nexus 4. Note that I said screen assembly, and not the digitizer. If you don't know, the glass "screen" is called the digitizer, which is glued to the LCD behind it. Now, it could be that all that actually needs replacing is the digitizer, but this is not an easy task, requires some specialist equipment, and you're still likely to screw it up. So I highly recommend going with the screen assembly, which is both the LCD and digitizer already ready to go.
You can get a new screen assembly off eBay. There are 2 different ways. One is just the screen assembly. It's cheaper, $45, but it requires that you remove the old one from the bezel, which can be a PITA. The other way is the full front assembly, which means you're getting the screen assembly already glued in to a brand new bezel. $60, a lot less hassle, and your entire front will be new and shiny and ding/scratch free again. Obviously, this is the choice I'd recommend (I've done it myself).
Might as well get a new battery while you're at it, for $20. At this point in its life, you've likely charged your phone several hundreds of times. Li-ion batteries will lose upwards of 20% of their original capacity after ~500 "cycles".
ifixit.com has some great tear-down photos, and there's a number of guides on youtube. It might sound a bit daunting, but it's a lot easier than you might think, at least with this phone.
I can't tell you whether you should just get a new phone or not - I don't know your situation, finances, urges, etc. But I will say that for a mere $80 you will practically have a new Nexus 4. Stick around, learn how to flash custom ROMs and kernels (if you don't already), and you very much will have a new phone. Or a great back-up to your new one.
Im stuck now with an iPhone 3gs! Tough times indeed.
Click to expand...
Click to collapse
Ouch.

Planterz said:
Replacing the screen assembly is actually relatively easy on the Nexus 4. Note that I said screen assembly, and not the digitizer. If you don't know, the glass "screen" is called the digitizer, which is glued to the LCD behind it. Now, it could be that all that actually needs replacing is the digitizer, but this is not an easy task, requires some specialist equipment, and you're still likely to screw it up. So I highly recommend going with the screen assembly, which is both the LCD and digitizer already ready to go.
You can get a new screen assembly off eBay. There are 2 different ways. One is just the screen assembly. It's cheaper, $45, but it requires that you remove the old one from the bezel, which can be a PITA. The other way is the full front assembly, which means you're getting the screen assembly already glued in to a brand new bezel. $60, a lot less hassle, and your entire front will be new and shiny and ding/scratch free again. Obviously, this is the choice I'd recommend (I've done it myself).
Might as well get a new battery while you're at it, for $20. At this point in its life, you've likely charged your phone several hundreds of times. Li-ion batteries will lose upwards of 20% of their original capacity after ~500 "cycles".
ifixit.com has some great tear-down photos, and there's a number of guides on youtube. It might sound a bit daunting, but it's a lot easier than you might think, at least with this phone.
I can't tell you whether you should just get a new phone or not - I don't know your situation, finances, urges, etc. But I will say that for a mere $80 you will practically have a new Nexus 4. Stick around, learn how to flash custom ROMs and kernels (if you don't already), and you very much will have a new phone. Or a great back-up to your new one.
Ouch.
Click to expand...
Click to collapse
Thanks for the great response! I think im going to revive my Nexus 4! Or at least try to It should be fun anyway taking it all apart!
Thanks for all your help!!

lewis03 said:
Thanks for the great response! I think im going to revive my Nexus 4! Or at least try to It should be fun anyway taking it all apart!
Thanks for all your help!!
Click to expand...
Click to collapse
If you need any assistance with dis/reassembly, I'm more than happy to help. I've had my Nexus 4 apart probably a few dozen times. Most important thing is to go slowly. Don't lose screws, and don't lose the tiny rubber gasket that's part off the proximity/ambient light sensor module. If, after reassembly, your screen goes black when making a call (and it's not against your ear), take it apart again and put the rubber gasket in backwards.

I had same problem. Please not that ebay china sellers are not selling oem displays and there are huge difference in terms of quality. I myself bought original oem LG from Germany, but it costed 100$
p.s. found him http://www.ebay.de/itm/Original-LG-...284?pt=DE_Handy_PDA_Akkus&hash=item35d533c834
Stickers, numbers on chasis all looked legit.

Touchscreen broken : any experience with replacements ?

Hi,
First i am sorry if there is already a topic like this one but i was unable to find it. Feel free to just point at it and be approprately mean with me.
My N4 fell on the back and the touchscreen does not respond correctly anymore (a 2cm high band in the middle is unresponsive, jsut where i should validate my pin code). I would like to know if you know fair prices, high quality screen replacements. The original part from LG is 120 EUR according to my local retailer, but i see replacements on amazon and ebay around 50 eur. I know i could replace the touchscreen only but it seems very risky, so i'd prefer to replace the whole screen instead.
Thanks !

jdefaver said:
Hi,
First i am sorry if there is already a topic like this one but i was unable to find it. Feel free to just point at it and be approprately mean with me.
My N4 fell on the back and the touchscreen does not respond correctly anymore (a 2cm high band in the middle is unresponsive, jsut where i should validate my pin code). I would like to know if you know fair prices, high quality screen replacements. The original part from LG is 120 EUR according to my local retailer, but i see replacements on amazon and ebay around 50 eur. I know i could replace the touchscreen only but it seems very risky, so i'd prefer to replace the whole screen instead.
Thanks !
Click to expand...
Click to collapse
The two ebay screens I've ordered were both blems with air bubbles trapped in the film. They worked though. I've got pictures of them somewhere.

So I just bought and installed this one a week ago:
etradesupply dot com/oem-lg-nexus-4-e960-lcd-screen-and-digitizer-assembly-with-front-housing.html
And it was worth every penny. My digitizer had cracked in the bottom corner, but was fully functional. What I didn't realize was how scratched up the glass was and how much the oleophobic coating had worn off. The new screen, digitizer, and frame from etradesupply was perfect. No bubbles, the glass was curved on the sides, and it is just as responsive as the stock screen. I was really worried about it not being up to OEM standard. The installation was very easy. I have read some replacements not having a filter over the LED and light bleeds out, but this one has the filter. 5 stars, would buy again. I did alot of research before hand, and have heard many horror stories of Ebay replacements, but this one really worked out well.

Another screen broken advice needed

Hello all,
I bought a Galaxy S4 for my partner, and stupidly didn't get it insured.
The screen got cracked quite badly, so fr £120 a local lad put a new screen on. Later that week it got dropped onto mud on the way to nursery and smashed entirely.
I now have a predicament, either give up the phone and go back to my sluggish s3, or ask you guys this question:
Where is the best and most value for money place to get a smashed screen fixed (you can't see anything just a rim of light) somewhere reputable that will use genuine parts and guarantee their work? I really don't want to just leave it on the shelf and am worried that without good advice I will end up with another shabby repair.
Your input would be greatly appreciated.
Many thanks and Happy Christmas,
Ric

If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.

knuckles1978 said:
If you only break the front glass like what happened to mine, you can get new glass for £5 and DIY. (If you're confident working on things like that - it is a bit of a nightmare of a job to separate the glass from the touch sensor)
But if there's no picture on the screen at all then you've killed it completely. A new full screen assembly is about £90 on eBay I think, so £120 is about the right price for someone to do it for you.
BTW, the first time you broke your screen, if you could still see the picture on the screen was fine, then the guy probably charged you £120 to change the £5 front glass. I've heard of people getting ripped off like that.
Most of the time it is just the front glass that is broken. Unfortunately this latest time, it sounds like you've been unlucky.
You could always take out phone insurance, leave it a couple of months, and then the screen breaks.
Click to expand...
Click to collapse
ha, the first time the phone broke, my misses threw it against a metal door obliterating the top and matrix thingy so an extensive repair was required. I'm well aware of the £5 DIY jobby hairdryer thing but this second breaking is again both screens, and I don't want a shabby repair I want the original screen part so that it is as strong as it can possibly be. I paid this guy £120, but the screen was so weak it broke dropping on mud! SO I still need to know, where can I get it fixed with genuine Samsung parts? Samsung only? Are the any reputable companies members would use to have their £500 phones repaired?
Thanks to the guy that replied I can't see your name now I'm replying somehow...

In pretty sure there aren't any fake AMOLED screens, not like phones that use LCD - there are hundreds of fake LCD's for those phones. But there are fake front glass panels.
If I wanted to make sure that genuine parts were used I'd order the screen assembly up from eBay myself. You can order it up as a complete front assembly from eBay, and it's a very easy job to change the whole thing over yourself, if you're reasonably confident about tackling things like that. Just make sure it's described as 'Genuine Samsung', and not 'Samsung panel genuine for i9505' or suchlike. If it's described as 'Genuine Samsung', then you have comeback of its not.
I've fixed a good few phones though, and all the times I've ordered parts as I've described above, it has been the real deal. It's pretty easy to tell the fake front glass panels.
Changing the front glass only with hairdryer etc is a sh!tty job, but changing a whole front panel which has the chrome effect plastic trim piece, AMOLED, touch sensor, and front glass already assembled is a piece of p!ss...

I would totally recommend just getting it fixed... plenty of tutorials online to follow. Watch a few of them and see if it is something you are comfortable doing yourself. I've done it and found it to be quite simple. But, it all depends on your comfort level with repairing things...

I think getting it fixed is the idea, yes lol
I was saying though that since it's the whole thing that is broken and needs changed, and not just the front glass, the job is much easier. It's just a case of taking a few screws out and swapping the whole front assembly. On a difficulty rating out of 10 I give it a 4
If you watch a couple of videos on YouTube first, and you take it nice and carefully, I'd say this is a job that most people could handle.