Related
Hello. So I've recently decided to root my mytouch 3g with the headphone jack, which probably makes it the 1.2 version, and I'm starting to regret it. I've followed the steps fine on this website (link below) until I got to step 3. I rebooted my mytouch however it is now stuck at the HTC magic screen. It hasn't changed for quite a while. I was wondering if my phone is bricked. Hopefully it's not and if it's at all possible to fix it. (just remove the spaces to get the link.)
h t t p ://t h e u n l o c k r.c o m/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
If ur still stuck, pull your battery, press red power/hang-up button + home into recovery. wipe and flash again. Keep reading those guides. What rom are you flashing by the way?
I haven't gotten to flashing the rom yet but I was thinking of the latest stable rom for mytouch 3g. Also I'm currently attempting to revert my mytouch back to the original firmware it came with and trying to see if i can root it again later.
Good luck. Not much out there thats stable like any official rom from tmobile, but its fun to learn (time consuming, too) If you dont feel up to it, stick with what it came with. New updates coming soon(ish) anyway.
20_Eyes said:
Good luck. Not much out there thats stable like any official rom from tmobile, but its fun to learn (time consuming, too) If you dont feel up to it, stick with what it came with. New updates coming soon(ish) anyway.
Click to expand...
Click to collapse
Lol soonish. Yeah I couldn't wait so I decided to root my phone. Hopefully I get things working.
you should be fine. Read and follow correctly. I used that same tutorial when I unlocked mine.
http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
This is what I used and I didn't run into any issues. Follow that to the "T" cause if you reboot at a particular part, the part that says "DO NOT REBOOT" and you do, you're jacked.
Hope you get it to work. Enjoy!
Luckily I managed to get it to work after many long hours and failed attempts. It seems that I was doing everything right and I just needed to shut off my phone manually instead of letting it restart when it prompts me to. If I had known this I would have saved myself many long hours of frustration. But thanks guys for the suggestions and help. It's nice to know I can have support when I need it.
How did you mange to pull it off? I have the same phone as you do, and I've been trying for days to get out!! just to use the phone on any rom then i'll try rooting it again!!
Please help me, im begging you!!
Thanks
Please provide the steps you did, if you don't mind specifically!!
I've got 1.72.405.3 Android 2.2.1 on my HTC Desire HD. I made a mistake by deciding to ROOT it :'( Went thru the following steps:
1) I dloaded SuperOneClick 1.55, turned on USB Debugging, turned off access to SD card then clicked on ROOT. It kept getting stuck at "Waiting for Phone to Respond...." So I dc'ed the USB cable & then my phone hanged entirely & I got really scared So then I removed the battery & turned it on again. But it was running rather slowly & was lagging quite a bit.
2) So then I read that SuperOneClick kept giving the "Waiting for phone to respond" msg cuz it needed its proper adb usb drivers. So then I went thru the whole process of trying to dload the Android ADB USB Driver. I dloaded Android SDK, then opened its console & tried to dload the driver from the options given. I searched & I searched but I don't knw wot the hell I was doing wrong bcoz I cudn't find the Android ADB driver ! I tried PDANet & all the other available choices from different websites such as this one (XDA Developers) & theunlocker.com. I even accessed the Android SDK folder thru cmd prompt but it wasn't showing any SERIAL.
3) so then I realized rooting was near to impossible at the moment. But my phone was lagging bigtime bcoz of the crap I had just made it go thru ! I tried fiddling with USB Debugging & everything but NO SUCCESS. It's not speedy & fluid like before. So I accessed FACTORY SETTINGS & reset my phone. It seemed to b fine after the reset but was still not as fluid as before (before I tried to ROOT it). But stubborn that I am, I then dloaded VISIONARY+ & made one last attempt at ROOTING my phone. I clicked on TEMP ROOT & save an image. But it got stuck at the screen where it says "ROOTING."
4) After finally accepting defeat, I wanted to remove ALL traces of any kind of rooting so I ran FACTORY RESET once more. This time after being reset, my phone seemed more fluid but still NOT like it originally was before the all ROOTING. I installed Go Launcher which itself is quite speedy but the phone still doesn't feel fluid & speedy like it originally was.... :'(
PLZ HELP ME !!!!!!!! WHAT DO I DO ?!?!?!
Download 1.72 RUU from DHD android development forum, posted by football, then just run that
Meaning I shud dload it, put it on the root of my SD card & then just run it thru ASTRO ? That's it ? Anything I shud b looking out for ??? Is it possible for me to downgrade the firmware & then root it & then install this 1.75.405.3 firmware over it whilst keeping my root ???
Downgrade is not possible. The RUU.exe is PC executable file, just run it and it will guide you through the process.
since when did SuperOneClick work for the DHD?
It does not.
didnt we already warned u 2 days ago, in your other thread, that since ur phone is already on 1.72, u cant root it?
Why did u still attempt to root it?
cenedra said:
didnt we already warned u 2 days ago, in your other thread, that since ur phone is already on 1.72, u cant root it?
Why did u still attempt to root it?
Click to expand...
Click to collapse
I don´t see how this is helping
:'( I cudn't help it... I messed up, I accept that :'( I also want root
Can't you boot into boot loader and wipe from there n u r back to stock again?
I've had the same since I tried it without knowing.
What you do is the following;
1. Turn off your phone.
2. Take the battery out, leave it alone for 10min.
3. Put the battery back in, and start it up again and wait 30min.
if I'm right, you wont have any lag troubles no more.
Actually, I dloaded 1.72.405.3 RUU by football as directed by jkoljo Then I flashed my DHD & voila everything was superb. But I still want roooooooooooot :'( Ahhhhhh one day..........
Hey.
I'm having difficulties with new cyanogenmod 7.1
I Followed different tutorials and none of them helped me.
I started with stock 2.1 rom and did all the unlocking bootlader stuff , then installed custom kernel and managed to install cyanogenmod 7.1 but then occurred a funny thing . There was only FreeXperia logo showing up, nothing else, and it rebooted all the time. Then I flashed stock rom again and tried to understand what's wrong and tried to use different kernels and nothing.
So my question is. Is there anything I'm missing here?
Henri.
Full wipe after you install rom.
Dot forget to make backups first.
about that...
i always do full wipe after installing roms, so it has to be something else.
Thnks anyway..
But after browsing several topics in XDA forum I saw that I'm not only one with the problem.
If anybody has had the problems like I do and got the solutions, every kind of tips are welcome.
Thread closed
I got it all working, but I don't know what was the reason, because, I just did the whole thing again about three or four times, and then it just booted and worked.
I never could install Cyanogenmod in my phone... could you?
Hey!!!
I could write a total working tutorial how I managed to get to work everything, but it takes time, so if you want tutorial send me private message , so I create it for you.
Henri
Does wifi and/or 3G work for you longer then 15 minutes?
No, but at the moment I'm using RC1 flawlessly.
Sent from my E15i using XDA App
coffee-break said:
I could write a total working tutorial how I managed to get to work everything, but it takes time, so if you want tutorial send me private message , so I create it for you.
Henri
Click to expand...
Click to collapse
umm..why not post it publicly man ? It will be useful for everyone including myself.
Would also like that tutorial
ok,
i'm gonna post it here after finishing it.
So, the wanted tutorial is here!
Firstly it's for xperia x8(E15i) to be superclear.
I'm gonna put that tutorial into steps.
STEP 1
You need to have stock 2.1 rom with baseband XXX015 , if you don't have it, then go to Sony Ericsson's webpage and download the upload service and flash it back into your phone.
STEP 2
You phone has to be rooted. Easieset way is using Superoneclick(sorry, i'm not gonna provide the link, because it's just google-ing thing to you who need rooting program)
STEP 3
Now, everything comes to the unlocking process for bootloader. there is also tutorial how to succeed when using s1tool and msm7227 (if you have problem, then I don't know). Try to undestand the tutorial of doing it.
S1tool is for identifying if your phone is unlocked or not.
and msm7227 is for unlocking
tut is here - LINK
I wish luck, don't brick your phone, but it's not so hard to understand tutorials if you have right phone and right tutorial.
STEP 4
I totally suggest to install stable rom. The reason is that released 7.1 has bugs and incompatibility with some phones and i haven't got wifi and 3g working , but tried different roms and kernels.
I provide links i got from deani77, big thanks to him.
You can try this link for FXP028 ROM - http://www.multiupload.com/IIWIPG1ALH
For FXP030 kernel try this link - http://hotfile.com/dl/132650338/7b17...USTOM.ftf.html
(that release is RC1 of Cyanogenmod 7.1 but I think it's the best at the moment!)
and you download all the files as usual. Rom zip package should be in the SD card's root folder, so you can easily install it after flashing kernel
STEP 5
installing is quite simple actually. You need to use flashtool that is provided with rom(link in step 3)
firstly you flash kernel. Kernel file is the one you downloaded .ftf file. You have to put that file(X8_custom.ftf) into firmware folder which is inside of flashtool folder.
Then you open flash tool and you click FLASH, then appears little window and you click ok and then you need to plug in your phone into usb while holding down back button. Your phone has to be off when you are doing that. Then flashtool identifies your phone and will flash the kernel into your phone. when everything comes smooth then you now have fxp custom kernel. it has clockworkmod recovery and you need to click several times back button when FreeXperia logo appears.
STEP 6
You have to do factory reset and format, also i suggest from advanced menu using format system.
Then you select from the recovery menu install custom zip... and you browse your rom .zip file and if everything is OK then it should display "installing update or smth" if it's done then good for you, you reboot and it should work.
IF YOU WANT GOOGLE APPS , then google the link and install it same way you did with the rom. You can do it any time.
..
So if anything is not understandable then ask. I'm not an expert or anything, I just did things like I described.
Best,
Henri.
i have still had problems with bootloop and passing md5 checksum any idea on how to fix this?
mm.. at the moment I don't know but what that md5 checksum means?
I fixed my bootloop issue when I flashed back to stock rom, then I just did all the steps I describe again (not unlocking bootloader because it was unlocked already) .. but I don't know what's really does the bootlooping thing. I just got lucky. It took me like billion hours until I got it working...
hi guys sorry to ask a qeustion that probably is sitting smack in front of my face but heres my problem;
ok i have a leaked version even though a few people confirmed it was the official because i wanted the update as soon as it hit the uk and i was seeming to be the last to get the ots.....
ok so ive tried a few methods of goin back to stock to getting back to stock to get the ota but of course since no recovery no luck.
ive tried the method in this thread
http://forum.xda-developers.com/show....php?t=1622425
but i cant get the tab into apx mode? ive tried loads of times but i just can get it to go into apx with the pin/reset power method,
ive tried using the pbj20upgrade.exe but it says i need the new image version (Acer_A500_1.016.05_COM_GEN1)
any idea what step i take from here as i seem to have hit a wall
my current version
IMAGE VERSION: Acer_AV041_A500_RV03RC01_WW_GEN1
BUILD NUMBER: Acer_AV041_A500_1.031.00_WW_GEN1
'vol_' + 'power' = (red) "recovery verified failed"
reason is i hear flexreaper rom ics is better then the stock ota and i wouldnt mind being able to flash it with.....taadaaaa recovery lol
chisme said:
hi guys sorry to ask a qeustion that probably is sitting smack in front of my face but heres my problem;
ok i have a leaked version even though a few people confirmed it was the official because i wanted the update as soon as it hit the uk and i was seeming to be the last to get the ots.....
ok so ive tried a few methods of goin back to stock to getting back to stock to get the ota but of course since no recovery no luck.
ive tried the method in this thread
http://forum.xda-developers.com/show....php?t=1622425
but i cant get the tab into apx mode? ive tried loads of times but i just can get it to go into apx with the pin/reset power method,
ive tried using the pbj20upgrade.exe but it says i need the new image version (Acer_A500_1.016.05_COM_GEN1)
any idea what step i take from here as i seem to have hit a wall
my current version
IMAGE VERSION: Acer_AV041_A500_RV03RC01_WW_GEN1
BUILD NUMBER: Acer_AV041_A500_1.031.00_WW_GEN1
'vol_' + 'power' = (red) "recovery verified failed"
reason is i hear flexreaper rom ics is better then the stock ota and i wouldnt mind being able to flash it with.....taadaaaa recovery lol
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/sho...ader+and+fixing+broken+recovery+in+leaked+ics
yeah like i say i cant get the apx mode up
chisme said:
reason is i hear flexreaper rom ics is better then the stock ota and i wouldnt mind being able to flash it with.....taadaaaa recovery lol
Click to expand...
Click to collapse
you're on the locked ics bootloader now so u have to use the manual entry to apx mode theres no getting round it i'm afraid...and thats if you want to go back to HC or flash a custom ics - the b/l needs to be unlocked first
good luck
So, you can boot into the OS ok just no recovery, is that right?
Use timmydean's method. http://forum.xda-developers.com/showthread.php?t=1307539 this will put you with a rooted 3.2.1
Works like a charm, and is as easy as following the PDF instructions. I have used it for my A500 and just used it today on the wifes as well.
It will wipe your data so backup your apps with Titanium or the likes to external sd card.
Update the Iconia Update app and check for upgrade via Settings (Should upgrade to ICS if available)
CyaN1de said:
Use timmydean's method. http://forum.xda-developers.com/showthread.php?t=1307539 this will put you with a rooted 3.2.1
Works like a charm, and is as easy as following the PDF instructions. I have used it for my A500 and just used it today on the wifes as well.
It will wipe your data so backup your apps with Titanium or the likes to external sd card.
Update the Iconia Update app and check for upgrade via Settings (Should upgrade to ICS if available)
Click to expand...
Click to collapse
Yeh it would work fine if he was on HC bootloader.
From what I gather he is running on the ics one. With td's method that means a downgrade using manual entry into the download mode m8, remember on the thread I saidit was a slightly different method for ics???you gotta get thru using button press
"You won't be able to tell if it is in apx mode until you're connected to pc and see the drivers being installed. As far as the tablet goes the screen is blaxk and the white power light is on..that's it..."
If the op has a working system he can root and life would be good;-)
@CyaN1de Nice to see you got the wife's one done too m8
dibb_nz said:
Yeh it would work fine if he was on HC bootloader.
From what I gather he is running on the ics one. With td's method that means a downgrade using manual entry into the download mode m8, remember on the thread I saidit was a slightly different method for ics???you gotta get thru using button press
"You won't be able to tell if it is in apx mode until you're connected to pc and see the drivers being installed. As far as the tablet goes the screen is blaxk and the white power light is on..that's it..."
If the op has a working system he can root and life would be good;-)
@CyaN1de Nice to see you got the wife's one done too m8
Click to expand...
Click to collapse
Didn't take into account the bootloader.....my bad. Still noobish to the whole tablet thing.
Sent from my A500 using Tapatalk 2
Hi guys thanks for taking the intrest in my problem I can boot up as normal and tab runs fine I'm just assuming its gonna be better on flexreaper rom' I'm at work now when I go on my break I will jump back on it,
I've found a tool at tegra owners by blackthunder I think? A500 apex flash tool its supposed to allow access to apex mode without pressing the buttons ... I'll let you guy know in an hour or 2
chisme said:
I've found a tool at tegra owners by blackthunder I think? A500 apex flash tool its supposed to allow access to apex mode without pressing the buttons ... I'll let you guy know in an hour or 2
Click to expand...
Click to collapse
nice one chis, that should do the trick for you, - you may need to reinstall your drivers again, just to be sure your tab and pc are talking the same language, see my guide in sig for that let us know how u get on yeh?
dibb_nz said:
nice one chis, that should do the trick for you, - you may need to reinstall your drivers again, just to be sure your tab and pc are talking the same language, see my guide in sig for that let us know how u get on yeh?
Click to expand...
Click to collapse
cheers bud, i got the a500 apx flash tool
i ran the tool selected the unlocked bootloader/kernal/ics recovery as per say from the thread ,
the tool went through the steps without problems and told it was succesful
........i rebooted......and nothing changed? still "recovery verified failed"
should i have turned the tab off before running the program? i know your thinking well yeah duh how will u access the apx mode......well i can get apx mode goin this is why im using the apx flash tool because the thread says you dont need to press the power+reset the tool gets apx by itself?
heres the apx flash tool thread: http://forum.tegraowners.com/viewtopic.php?f=30&t=388
UPDATE: I FINALLY GOT IT INTO APX MODE YAY!!!! now i know the method ill b back to post the results
UPDATE 2:
GOT IT GOOD!!!
used the tool it did its golden thing,...and i got the pass screen, .. yeah i have no finger nails left but YAAAAAY big time, ok so to install flexreaper i just put it as "update.zip" and install from recovery right?
also im luving the little recovery menu buttons in the bottom right never had that before lol
special thanks to dibbz for the confidence boost to make me try apx just a few more times lol
ok can anyone now provide me with a link to the OFFICIAL ICS OTA FOR GEN1 UK
please, i know im conforming to the usual "noobish request" but ive been up till 4am or the last 2 nights im beginning to miss links and skip vital lines in guides lol
chisme said:
UPDATE 2:
GOT IT GOOD!!!
used the tool it did its golden thing,...and i got the pass screen, .. yeah i have no finger nails left but YAAAAAY big time, ok so to install flexreaper i just put it as "update.zip" and install from recovery right?
also im luving the little recovery menu buttons in the bottom right never had that before lol
special thanks to dibbz for the confidence boost to make me try apx just a few more times lol
Click to expand...
Click to collapse
woohoo glad u got it m8
so the tool worked a charm, best u go push thanks button on blackthund3rs thread!!!!
so are you on ics or 3.2.1 (cant be bothered looking back at yr posts sorry)
there are 2 versions for flexreaper
for flexreaper ics - with hc bootloader -i.e. u came from HC 3.2 check out civs guide in my sig -
if u ota'ed to ics u r on ics bootloader then make sure u d/l that version on the main 'reaper rom thread
i restored back to stock and still waiting for the OTA - if i dont get it today i'll be doing the guide myself, looks rather daunting but i guess i just need to follow the instructions to the letter....like i've been tellin everyone elose hahha
just re-read yr post ---"sore fingernails?????" did you use the tool or the button press
thanks for the thanks i'm gonna be looking for someone like me when i unlock that ics b/l lol
rgds D
---------- Post added at 07:07 AM ---------- Previous post was at 06:59 AM ----------
chisme said:
ok can anyone now provide me with a link to the OFFICIAL ICS OTA FOR GEN1 UK
please, i know im conforming to the usual "noobish request" but ive been up till 4am or the last 2 nights im beginning to miss links and skip vital lines in guides lol
Click to expand...
Click to collapse
now i'm confused....yes m8 its been a rather hectic couple of days....eyes are hanging out and brain has turned to mush....
thort u were gonna use flexreaper, now u want OTA link????
check out the 'how do i capture the ics ota" thread theres some updates in there
but before u go actually flashing something....get some sleep, we will all still be here tomorrow/today!!!!!!!
LOL yeah i bit most of me finger nails off trying not to shat myself watching the tool doin its thing
i was on 3.2 then i flashed the Acer_AV041_A500_1.031.00_WW_GEN1
after being told it was the real official .... now ive just got the unlocked bootloader installed with blackthunders apx flash tool.
so now i have Acer_AV041_A500_1.031.00_WW_GEN1 with accessible bootloader and root,
im split between goin flexreaper , or back to 3.2 to recieve the ota
chisme said:
...1) LOL yeah i bit most of me finger nails off trying not to shat myself watching the tool doin its thing
...2) i was on 3.2 then i flashed the Acer_AV041_A500_1.031.00_WW_GEN1
after being told it was the real official .... now ive just got the unlocked bootloader installed with blackthunders apx flash tool.
...3)so now i have Acer_AV041_A500_1.031.00_WW_GEN1 with accessible bootloader and root,
...4) im split between goin flexreaper , or back to 3.2 to recieve the ota
...5)
Click to expand...
Click to collapse
--1) hahha sooooo funny - oh to be a fly on the wall watching that process!!!
--2) is that an update.zip m8
--3) you done good young grasshopper!! - what methods did u use...or have u said...sorry...mushy brain syndrome
--4) get a recovery on there and do a nand, give flexreaper a try so you can have a comparison with the stock ota, then u can do a nice wee review for those of us still stuck w8n on acer gods to OTA us
--5) now u got the flash tool sussed u can have it all, lol. you may be disappointed with the ota m8, why ya wanna ruin that good buzz ya got goin
to be honest after i got it into apx mode the timmyd v4 was a breeze....a cold sweaty breeze but yeah.
ok lmao its 2:35am my tab is now ics 403 flexreaper 12.5 with a boot image install to fix a sod problem from F'reaper......and then F'reaper 13 comes out..damnit lol but all good right now im still chasing that damn faceunlock.
i do now have the acer ring!! yay!! ...its cool. lol
has anyone tried the flexreaper r13?
awsum, you're legend m8 thort i saw yr name pop up over there...i gonna d/l r13
2nyt get some well deserved sleep then do it all again 2mra..whoohooo
jesus thats another 4am'er last night lol good thing i got the day off work today lol.
so im brightly running the flexr' 12.5 everything seems to be great.
The acer ring is easy for customization, apparently we can apply TONS of mods to the 12.5 / r13 like transparent ring and menu's but right now the rings the colour it should be for me lol GOLD
so im gonna play around for a few hours and see if i can see what difference r13 brings before flashing but i have got the r13.zip ready on me sd lol
before tabs i was just mucking about with a htc hero gsm noticed one new thing in the flashing steps in cwm rec'., you dont "have" to rename the zips to "update.zip" anymore lol i know that seems small but its much easier not to get your versions muddled up after renaming them all to update.zip , i got about 15 update.zip's on me comp and i havnt got a fecking clue what they are lol
Hey guys so I am facing weird problems. I have searched through the forums either I cant find anything or I am too scared to do any more experiments I really dont want to loose my Razr M XT 907.
Problems
Laggy performance at times
Camera gets stuck when I take pictures at times then I have to restart.
when I reboot my phone it shows AP Fast boot screen, then I have to access boot menu and select the second last option (Console something). It always shows Null:Null and when I change it back the phone reboots normally
Phone hangs sometimes and then responds with everthing I have clicked all at once.
The screen on off button responds a second late
I think you guys can help me better if I tell you what I did to this phone exactly since I got this phone.
What I did
I initially bought this phone with defaul OS 4.0.1 in Pakistan.
I then installed a Verizon system update of 250 MB that got my phone stuck on a boot loop (and made me cry almost)
I restored my phone to the settings it came in using this procedure
http://www.andromods.com/tips-trick/how-to-restore-unroot-droid-razr-m-xt907-stock-original-firmware.html
The phone worked fine for 2 days but then I got that update prompt again and it got annoying so I though maybe If i upgrade it to JB using the same RSD Lite method but a different ROM that may solve it.
So I applied the above Procedure using this ROM
http://forum.xda-developers.com/showthread.php?t=2250155
The method showed as Passed on RSD Lite but the phone got stuck on bootloop again so I paniced and tried restoring my phone abck to ICS using the method mention in the first link provided.
Then the phone got stuck on AP Boot Menu
Then I used DROID_RAZR_M_Utility_1.20 and used both methods 1 and two but it didnt work
Then out of the blue I went to the boot menu and I saw an option Switch Console (Null:null) I pressed up key on and null null changed to default:tty something it and the phone booted up just fine back to ICS
Now everytime I power off the phone it goes to AP Boot menu showing FASTBOOT REASON: Sticky bit factory_fastboot and I have to do the above to restart the phone.
What I need
Please help me restore my phone I dont want to brick it, I am a simple user I will need step by step guide
Anyone ?
Bump
Bump still looking for a solution
I have CM10 on mine and the camera is completely broken
Enter fastboot oem fb_mode_clear and problem gone.
v0ltage112 said:
Hey guys so I am facing weird problems. I have searched through the forums either I cant find anything or I am too scared to do any more experiments I really dont want to loose my Razr M XT 907.
Problems
Laggy performance at times
Camera gets stuck when I take pictures at times then I have to restart.
when I reboot my phone it shows AP Fast boot screen, then I have to access boot menu and select the second last option (Console something). It always shows Null:Null and when I change it back the phone reboots normally
Phone hangs sometimes and then responds with everthing I have clicked all at once.
The screen on off button responds a second late
I think you guys can help me better if I tell you what I did to this phone exactly since I got this phone.
What I did
I initially bought this phone with defaul OS 4.0.1 in Pakistan.
I then installed a Verizon system update of 250 MB that got my phone stuck on a boot loop (and made me cry almost)
I restored my phone to the settings it came in using this procedure
http://www.andromods.com/tips-trick/how-to-restore-unroot-droid-razr-m-xt907-stock-original-firmware.html
The phone worked fine for 2 days but then I got that update prompt again and it got annoying so I though maybe If i upgrade it to JB using the same RSD Lite method but a different ROM that may solve it.
So I applied the above Procedure using this ROM
http://forum.xda-developers.com/showthread.php?t=2250155
The method showed as Passed on RSD Lite but the phone got stuck on bootloop again so I paniced and tried restoring my phone abck to ICS using the method mention in the first link provided.
Then the phone got stuck on AP Boot Menu
Then I used DROID_RAZR_M_Utility_1.20 and used both methods 1 and two but it didnt work
Then out of the blue I went to the boot menu and I saw an option Switch Console (Null:null) I pressed up key on and null null changed to default:tty something it and the phone booted up just fine back to ICS
Now everytime I power off the phone it goes to AP Boot menu showing FASTBOOT REASON: Sticky bit factory_fastboot and I have to do the above to restart the phone.
What I need
Please help me restore my phone I dont want to brick it, I am a simple user I will need step by step guide
Anyone ?
Click to expand...
Click to collapse
I have solution but the android you will flash is android kitkat i don know if do u want reply me if u want to unbrick note: kitkat not supported root
lulz
Adriantech said:
I have solution but the android you will flash is android kitkat i don know if do u want reply me if u want to unbrick note: kitkat not supported root
Click to expand...
Click to collapse
Dude.. you know that you're responding to a thread that is literally a year old right?
cliMAKtic said:
Dude.. you know that you're responding to a thread that is literally a year old right?
Click to expand...
Click to collapse
And wath is the problem i cant help?
Adriantech said:
I have solution but the android you will flash is android kitkat i don know if do u want reply me if u want to unbrick note: kitkat not supported root
Click to expand...
Click to collapse
I also have a solution, but you would need another phone...
But as cliMAKtic said, it's most likely way too late now. Same goes for your replies in other threads.
Adriantech said:
And wath is the problem i cant help?
Click to expand...
Click to collapse
You can, but I'm afraid you won't. You'll rather achieve the opposite by bringing obsoleted threads back to the top.
lem22 said:
I also have a solution, but you would need another phone...
But as cliMAKtic said, it's most likely way too late now. Same goes for your replies in other threads.
You can, but I'm afraid you won't. You'll rather achieve the opposite by bringing obsoleted threads back to the top.
Click to expand...
Click to collapse
ok