Hi!
I want to write script that checks if orientation is switched to landscape and display is switched off - then script should do the same, as clicking the vibrate radio on wm volume control. And if PPC is in portrait or screen id on - it should switch back to normal old volume value (switch off vibration).
How to do this? (detecting if screen is switched off and switching from normal mode to vibrate mode)
Thx
Related
Hi,
when i open my wizard to show the keyboard, i noticed that the screen is put into landscape mode just before some switch is activated.
When i fully open the screen since yesterday my right upper part of the screen seems not to work anymore. So i can not use the OK button, the sound volume, etc. My Start button is working.
Also the calendar is automatically started when i open up the keyboard.
When i put back the screen to portait mode just a tiny bit (just after the locking and before the screen goes to portrait mode) the screen starts working like it is supposed to be in landscape mode eg. all buttons are working again?
On my imate kjam, in order to set silent mode quickly, all I had to do was to hold down the left comm manager button for a few seconds and I would be in silent mode. I have tried everything with the TyTN, even depressing the scrolling button, etc... but I can not get anything to work. DOes anyone know which key depression will place the phone in silent mode ?
Ringer Off/On Button
Hi there,
There is a free progam called VibraSwitch which you can set to any button (I have my OK button set)
If you install this you will be able to switch easily between Ringer On and Ringer Off with Vibrate On quickly and easily.
If you can't find the program let me know and I'll email you the .cab file.
Regards
Terryd1980
A few days ago I bought a Omnia 2. I put some useful programs and everything was OK.
Today I noticed, that when someone calls me, it doesn't work vibration. Generally vibration works, ex. when I touch the screen. It works even as I get a text message. SR does't help. Uninstalled all installed programs - doesn't work. After the HR, it works. I threw a backup - doesn't work. I found a program VAlert, but on the Omnia's probably not working. What could it be and how to fix it?
I use phonealarm pro and enable call vibrate. Vibrates once when the call is connected and twice when the call ends. no need to hold call up to ear while dailing.
No Viberation Soultion
i beleive i have a soluton for ur vibration prblm
all u need to do is
>first put ur phone in silent mode by presssing and holding '#' button or by clicking the volume buttn and selecting silent mode.
>once in silent mode press the volume button and then increase thevolume from 0 to 5 without switching to normal mode.
> ur problem is fixed...
solution:
1)select vibro mode
2)increase system and call volume from 0 to 5
3)select normal mode and enjoy=)
Hi,
I recently upgraded my cell to Jelly bean CM10.
I have a issue with silent mode feature.
Steps to reproduce :
1. Turn cell on vibrator mode (Long press power button, choose vibrator option)
2. Plug in headphone.
3. Now the mode turns to loud/general automatically.
4. Plug put the headphones.
5. Still the mode remains loud/general.
I have to again set it to silent manually. This is rather irritating. Anyone has any work around?
Hi all,
is it possible to configure the physical modes button to enable/disable auto-rotation of the display? Of course by means of a mod I mean.
I would like this configuration:
button up: mute - auto rotation OFF
button in the middle: volume up - auto rotation ON
button down: volume up - auto rotation OFF
Is this possible in any way?
Thanks
gunther82 said:
Hi all,
is it possible to configure the physical modes button to enable/disable auto-rotation of the display? Of course by means of a mod I mean.
I would like this configuration:
button up: mute - auto rotation OFF
button in the middle: volume up - auto rotation ON
button down: volume up - auto rotation OFF
Is this possible in any way?
Thanks
Click to expand...
Click to collapse
Tasker can grab the hooks triggered by the switch. The problem is the switch will still change the phone to DND in the middle position. I don't even bother with the middle position because DND is useless. I also hate how easily the switch moves when you put the phone into your pocket. If you don't use a case, this will drive you nuts.
xxBrun0xx said:
Tasker can grab the hooks triggered by the switch. The problem is the switch will still change the phone to DND in the middle position. I don't even bother with the middle position because DND is useless. I also hate how easily the switch moves when you put the phone into your pocket. If you don't use a case, this will drive you nuts.
Click to expand...
Click to collapse
Can you please guide me on how to make tasker grab the hooks triggered by the switch? I looked into events in tasker but I couldn't figure it out.