About 1/2 of the time that I pull my jamin out of my pocket when I'm getting a call, I hit a button of some sort which shunts the inbound call to voicemail. Very very annoying.
I have my buttons all on the locked setting except for power, but when the phone rings - all bets are off and every button is live. Bad design.
Thanks in advance!
I too had the same problems ...I just get the photo framed and what happens .. I press the power botton and turn the thing off! Very annoying.
but you do eventually get used to remembering to not pick it up by the sides wher ethe buttons are.
Buttons
I asked the same thing last week (see link). The suggestion did sort of work, but was not slick enough for practical use. Would be nice for a proper solution (such as the 'menu*' on the Nokia).
http://forum.xda-developers.com/viewtopic.php?t=41956
Hi there,
I am a little ticked off with the way the phone switches the light off and you HAVE to press a button to get it back up when in the middle of a call.
Is there any way to keep the phone awake while on a call? Ofcourse, I HAVE tried out "Shake Awake", but thats a little buggy too.
And also, the buttons for Hold, Mute, Speaker mode and all those options come up only when you press the menu button. Is there any alternate dialler available or something which can get all these options on the screen while on the call like the iPhone as its easier to use it than press the button to get the options?
just install keepscreen.
edit: this will keep the screen alive. about the alternative dialer i don't know. but be aware that the phone has no proximity sensor, so you are prone to accidentally press random buttons.
Cool. Will check it out man. Thanks.
I have a different problem - since, sadly, Hero has not got a proximity sensor, I constantly drop my calls by accidently touching the end call button with my cheek. I believe that's a reason the screen backlight goes off so quickly during a call - when the screen is off, it does not react to touch too, so that accident call drops would be less likely.
There are still some serious problems though. First of all, screen timeout during a call is not short nough - while you can know that you must wait a few seconds before you can actually touch the phone with the face, others can't, so call drops are, sadly, unavoidable in such cases. The fact that hold, mute and other buttons are hidden under the menu button is a good thing not only because it keeps Android phillosophy straight, but reduces chances of unwanted misc. actions. The solution of this problem could be an option to disable the end call button, since there are dedicated hardware keys for that.
I have also noticed that if you minimize the dialer during a call with home button, the screen timeout will not be quick, so before continuing a call it's a good idea to bring the dialer back by tapping the hardware call button so the screen timeout becomes quiick again.
Very true. I thought about all these before I posted, but on the other end, I just said 'f it' to myself and asked it here.. hehe.
I wonder if iPhone users have such issues.
As someone in this forum mentioned, it is best to have the screen switched OFF during a call, unless you have something to do. This way, it prevents you from fiddling with the controls.
Not just the hero, earlier models too have this feature. It quite odd in the beginning, but you will love it later.
subhramani said:
Hi there,
And also, the buttons for Hold, Mute, Speaker mode and all those options come up only when you press the menu button.
Click to expand...
Click to collapse
Not necessary!
During a call
- Press "Call" to hold (will also mute)
- Press and hold "Call" to activate speaker mode.
After i hang up on a call (when the phone is in sleep mode and the screen is locked) the screen unlocks. this is quite contrary to what is mentioned in the phone manual chapter 1 page 45. this becomes an issue since i use a bluetooth headset and the phone remains in its sleeve/case and after every call, a whole bunch of applications will launch since the case is in contact with the screen. have i overlooked some settings or are there other owners who have faced this issue?
ideas and suggestions welcomed
did you check it out if any of the hardware buttons being pressed against the case hence wakening up the phone.?
i had it to only closed al my apps in taskm and it stoped flickering
My HD2 is also behaving in the same way even in controlled test conditions - the phone unlocks when a call comes in (I'm presented with slide to accept or reject call) The phone unlocks during the call, but fails to lock again on disconnect (either by pressing "end call" or hang up via bluetooth).
Can anyone verify this? Is it interacting with something I installed?
I believe I found a (complicated) workaround.
What I want: leave HD2 inside pocket, answer calls with bluetooth headset, hang up and phone will go back to lock.
Problem: After I hang up using bluetooth or press the big red "End Call" button or the other party hangs up, the phone stays unlocked! It stays powered on and all kinds of buttons gets clicked.
Practically all lock sw uses their own lock screen (which I don't want to install). CSDevCtrl does not trigger by phone. TouchLockPro uses its own transparent lock screen but can respond to phone events. Using the !SUSPEND for TAPI\Ended under settings does not seem to work when the screen dims about 50 secs into the call.
Solution: Use TouchLockPro together with LockAndOff. Get TAPI\Ended to run LockAndOff will turn phone off, whether by bluetooth, big red "End Call" button, or the other party hangs up.
BTW: I think there is some confusion on whether the phone locks when you
1. press the big red "End Call" button, or
2. the hard "End call" button
in the forums.
I noticed that HD2 have a light sensor next to the top ear speaker.
During a call, if the phone is put near the ear and cover the light sensor , the screen become non-active which is good.
If anyone can come up with a lock sceen using this light sensor , then the problem with random launch of program when phone inside pocket will be solved.
This lock screen should only activated right after an end of call, beacuse , sometime you may want to use the phone in a dark place.
linivan said:
I noticed that HD2 have a light sensor next to the top ear speaker.
During a call, if the phone is put near the ear and cover the light sensor , the screen become non-active which is good.
If anyone can come up with a lock sceen using this light sensor , then the problem with random launch of program when phone inside pocket will be solved.
This lock screen should only activated right after an end of call, beacuse , sometime you may want to use the phone in a dark place.
Click to expand...
Click to collapse
It's the proximity sensor that turns the screen on and off during a call, not the light sensor. How else would it work in the dark? (which it does)
johncmolyneux said:
It's the proximity sensor that turns the screen on and off during a call, not the light sensor. How else would it work in the dark? (which it does)
Click to expand...
Click to collapse
My proximity sensor does not work, when I am getting a call my screen turn off and when I am taking the phone out from my face it turn on only when I am out side at the sun!! the screen stay off when I am inside room. I tested it with flsh light and it is working also.
I have a T-Mobile US version of the HD2. I am having the same problem when using the bluetooth system in my car. After answering or making a call the phone stay unlocked. And then starts making random calls while I am driving!!!!
There has got to be an easy fix for this!!!
Buy pocketshield, problem solved.
i have this unlock problem with 1.48 rom and i solve it by pressing start button and lock. after that everything works fine unless i change theme in settings. then just repeat first step.
Solved
Same trouble with me until I use the following software. I tried it and it's almost perfect. unzip it and just copy to your HD2, run CallerLoc.exe and click Yes, you'll find:when you hang up, or he/she hang up a call, or a call is established, the screen will turn off.
Why say 'almost perfect', the software is in chinese, but the filename is in english. and it's a call location software but with the function we need.
To stop or before you delete the software, run Callerloc.exe and click Yes again.
Hope this will help you. Sorry I don't find a English version of this software. I esure and I'm using this software perfectlly with my Leo.
theciscokid said:
Buy pocketshield, problem solved.
Click to expand...
Click to collapse
Same for me
Greetings.
I understand this is quite an old thread I'm digging up but I need a little help as well and I didn't want to start a new topic just for that.
I've this silly problem, appeared right out of the blue:
You all know the standard manila behavior, when the phone is idle, the screen first dims and after some more time, depending on your preferences, the screen locks. It also locks if you press the power off button. This all was happening to me till this morning.
I added an event in the calendar (the only change I made today) and after that, my phone dims and then goes in sleep mode after the designated period of time, but DOESN'T lock!!! It doesn't even lock when I press the power off button. I can still lock it by pressing Start and then lock or by press and hold the power button and choose the lock phone option. So one would say that it's still operational, so why bother about it, but I kinda liked the standard function and I have to freaking idea why it changed!!!
I'd be most appreciative if you could offer some help with that.
Oh, I forgot to mention. Soft reset didn't solve the problem. Erasing the calendar event didn't either.
My phone runs the factory ROM (1.66.482.1 ELL), I haven't changed anything other than user settings (yeah, I'm a noob... )
Thanks in advance!
Nasos
Pocketshield could be the end of your problems. You can try it for 10 days and see how it goes...
But why do I need to buy third party software in order to revert my phone to it's original operation?
No, this is not the answer I am looking for. I was wondering if you know of any kind of settings that might have changed by accident and caused this undesired behavior.
Thanks.
The best to return to normal operation would be a hard reset. Or you can spend a while trying.
You can try
HKLM\Software\Microsoft\Shell\Lockscreen\Enable=1
HKLM\Software\Microsoft\Shell\Lockscreen\Active=1
Thank you very much. I opted for the hard reset option... I hope it stays ok this time!
My HD2 also had some strange unlocking and unwanted calling.
I noticed it appeared when using the android style lockscreen.
When I changed back to the original one, problem solved
i had this too. the andriod lockscreen seems to be a bit buggy last time i used it, i accidentially called 7 random numbers
I have the Verizon G2 and just wondering if anyone else notices the incoming call screen changes. Sometimes I have the screen where the answer/decline buttons are circles and require a slide but other times I have an answer screen with big squares for answer/decline and require a press.
I can not figure out the reasoning why this screen changes formats. I just had 2 calls from the same person and each call was different.
When I'm in a call and get a 2nd call, it normally the big squares. What sucks is that when talking and the phone is on my cheek, the 2nd call comes in, turns on the display and with the huge buttons, I've answered and declined a few calls with my cheek.
I also notice with the latest update that the screen is turning on more often and my face starts hitting buttons. Mostly the clock from the statusbar notification shade, go into time settings and messes up my time. Usually I find my clock in 24hr mode. Today it was 2hours off.
I'm not sure if notifications coming in while on a call is turning the screen on or if the sensor is getting whacky. Its getting to the point where it is becoming annoying so I'm posting about it.
Anyone else notice the dual answer screen formats and having issues with being on calls and the screen turning on? I've been having to hit the power button to force the screen from coming on and launching stuff or toggling my notification stuff.
player911 said:
I have the Verizon G2 and just wondering if anyone else notices the incoming call screen changes. Sometimes I have the screen where the answer/decline buttons are circles and require a slide but other times I have an answer screen with big squares for answer/decline and require a press.
I can not figure out the reasoning why this screen changes formats. I just had 2 calls from the same person and each call was different.
When I'm in a call and get a 2nd call, it normally the big squares. What sucks is that when talking and the phone is on my cheek, the 2nd call comes in, turns on the display and with the huge buttons, I've answered and declined a few calls with my cheek.
I also notice with the latest update that the screen is turning on more often and my face starts hitting buttons. Mostly the clock from the statusbar notification shade, go into time settings and messes up my time. Usually I find my clock in 24hr mode. Today it was 2hours off.
I'm not sure if notifications coming in while on a call is turning the screen on or if the sensor is getting whacky. Its getting to the point where it is becoming annoying so I'm posting about it.
Anyone else notice the dual answer screen formats and having issues with being on calls and the screen turning on? I've been having to hit the power button to force the screen from coming on and launching stuff or toggling my notification stuff.
Click to expand...
Click to collapse
I have the exact same problem. I actually factory reset the phone to no avail. It's weird absolutely. But I've learned to live with it by not pressing the whole phone on my cheek, instead it's held at a slight angle, just the top speaker on my ear and the rest away from my face. The phone gets less dirty and there's no chance I'll press some things with my face.
I've found that if you manually turn the phone off via power button, it'll stay off. The problem is then ending the call since pulling it away won't turn on the screen.
However I am still curious about the Incoming Call screen theme. Sometimes it uses the small Circles that you click and drag while other calls use the big square button theme. It flip flops randomly.
I can't remember if the Incoming call screen would flip flop before but the screen on/off bug was introduced in 4.4.2
Since getting the lollipop update, I have noticed that the screen turns on when while I am holding it to my face during a call. It seems to be more sensitive, turns on too easily. Also related I think, is that because the display turns on, my fingers seem to hit the 'hang up' button now unintentionally. So I am talking, screen turns on, finger on side of case maybe barely touches screen... call hangs up.
Anyone else seeing this, any way to adjust this so it stays off until I remove it completely away from my face?