Hi
I know this subject has been covered many times on this forum but I have tried desperately to exit bootloader mode after completing a rom upgrade
Can anyone help ???
jonboy8841 said:
Hi
I know this subject has been covered many times on this forum but I have tried desperately to exit bootloader mode after completing a rom upgrade
Can anyone help ???
Click to expand...
Click to collapse
...and you already tried:
- removing SD and SIM
- flash radio rom only
?
buzz
maybe too much redundant info, but I really like the way buzz helps people Keep doing your great work buzz.
I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
i have flashed my unlocked athena x7500 with rom 6.1 by irius. the update breaks at 98%.
now i have only pixels on screen, and nothing happens.
in the Bootloadr following:
\
IPL-v1.00
\
SPL-v1.20 Olipro
Help... help... help...
Explain a little more by 'changing ROM'!
I was entering a rom and I was blocking the Athena by making a reset everything returned to normal but I can not enter another rom because I get this error.
As we enter the ATHENA in Bootloader I get:
, @
IPL-V1.00
, @ MFG
SPL-3.50.OliNex
Missing data?
What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!
Montecristo said:
I change the rom and Advantage it´s broken!!!!!!!!!!!!!!!!!!!!
The error is ERROR 244 INVALID ID
Help... help... help...
Click to expand...
Click to collapse
cmonex has a automated fix for that, i think its under upgrading fourm
Irus, just to take advantage of this learning opp. What did Montecristo do to the device (or try)? What happen to it?
Kenjari said:
What ROM are you coming from? What ROM did you attempt to install? How are you trying to install it?
I'm still a little confused by 'blocking the Athena by making a reset'
If you are attempting to reflash your device to a different ROM, make sure you follow the instructions posted around the site.
Are you downgrading? Using cmonex downgrader....... I hope I can help but I need a little more information from you on whats going on.
Or maybe someone else can chime in if they get it!!!!
Click to expand...
Click to collapse
I had installed the rom iRUs, then installed the new rom taxist and 98% were blocking ...
Try to re install and continues to bug me.
Please, my English is not very good ... some help ...
I made the downgrade but I continue to get the same error!
You used the wrong SPL Version
Montecristo said:
I made the downgrade but I continue to get the same error!
Click to expand...
Click to collapse
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.
lakeman said:
It seems that you did not read taxists instructions that it is for SPL 3.5 only
Why don't you try flashing AP3
Edit:
sorry bit of confusion with what you have done.
Were you on SPL 3.5 originally?
Did you use Cmonexs downgrade file after the failed Taxist flash?
If you did then trying AP3 for SPL 1.XX should work.
Click to expand...
Click to collapse
I had the spl 3.5 when installing this ROM.
Already concerned with all rom and tell me the same problem.
same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german
xacsx said:
same prob >> http://forum.xda-developers.com/showthread.php?t=405496
but with spl 1.2
maybe this helps http://www.xxacsxx.wg.am/ameorepair.html << but its german
Click to expand...
Click to collapse
Exactly .. this is ... We saw your resolve?
IT WORKS!!!!
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4 <<< see here
my ameo lives again YEEEEEEEEEEEEEHHHAAAAAAAAAAAAAA
ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.
cmonex said:
ok, i'll probably make a new thread and sticky that. about modelid (and wifi) restoring
but yeah until then everyone use that link,
http://forum.xda-developers.com/showthread.php?t=387454 here mainly 33rd post.
if you already managed to screw the modelid, the downgrader won't help, because it only reads the current information (of modelid and wifi) and transfers it to the right place when downgrading.
but the above link always helps. you just need a mac address to enter in the program.
Click to expand...
Click to collapse
YES!!!!!!!!!!!! YEAH!!!!!!!!!!! SI!!!!!!!!!!!!! SI !!!!!!!!!!!! MASTER!!!!!!!!!!!! GENIUS!!!!!!!!!!!! MAESTRO!!!!!!!!!!!! GENIO!!!!!!!!!!!!!!!!!!
Thanks!!!!!!!!!!!
Now'm going to donate some money for what they've done !!!!!!!!!! Thank you
Thansk!!!!!!!!!!!!!!! Xascx.
I´m very happy!!!!!!!!!!!
Sticky done, thanks CMONEX!
sergiopi said:
Sticky done, thanks CMONEX!
Click to expand...
Click to collapse
ahh I didn't notice you are a moderator thanks for stickying this.
mac number?????
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english
meybaland said:
hello all !
i have the same problem but with the 1.20 spl
please where i can find my athena "mac number"
what i have to do ?
please help me and sorry for my english
Click to expand...
Click to collapse
If you use router, the number is there....
Few questions:
How do you mess up the modeID and wifi anyway? Is it flashing to many ROMs? Does this automatically happen with the upgrade to spl 3.5? How does this happen?
Second, I have ran across my the mac address....but I'm having a blank....where can you find that at?
Hello folks,
I'm new here. I don't know much about the technical stuff.
I have HTC3300 (Artemis).
I installed "Gullum's WM6.1 Beta version" in it but It became slow
than I searched here in this xda forum for WM6 and found a WM6 rom for Artemis.
I installed it.
That rom's name is "HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_ R".
Now I'm not able to USPL. I have tried 3-4 times. (without SIM and SD Card)
After using USPL utility, on booting it shows:
IPL 3.13.0001
SPL 3.13.0000
GSM 02.94.90
OS 3.13.0.0
SPL is not changing to 1.11.0000. Please HELP me.
How can I unlock it?
I mean how can I succeed to USPL my Artemis?.
I shall be GRATEFUL to YOU
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Zecanilis said:
Welcome to the forum.
You have posted two times the same thing, and still didn't said what the problem was...
Can't USPL.. Ok.. But why? Any error? Any something?
Next time just try to don't double post ok?
Cheers
Click to expand...
Click to collapse
First of SORRY for the double post. I thought the same previous post will hide in between the posts in that thread. I won't repeat this in future..
Problem is that I want to upgrade the Radio Rom, so when I use the USPL tool to CID unlock my phone,
after reaching 10%....20%....30%.....40%....50%....60%....70%.....100%, the screen become white and phone gets disconnected from the Active Syn.
Either I have to remove the battery or I have to soft reset to start the phone after "white" screen.
On booting, it still shows SPL 3.13.0000 not showing 1.10.0000.
SPL didn't change to 1.10.0000, is it means that device is still CID locked?
please tell me where I'm mistaking here..
I'm using Vista Ultimate SP1 in my Notebook.
Nobody is there in this forum,
who can help ME ??
Anyway ... thanx to everybody..
I myself found the solution...
New Radio Rom - INSTALLED > 03.34.90 ..
I'll post my feedback about this new RADIO ROM 03.34.90 in the main post by Zecanilis
Thanks "Zecanilis"
could you please let me know the solution?
I got the EXACT same problem
thanks.
Dont worry, the solution was on this post by pvdhelm:
http://forum.xda-developers.com/showthread.php?p=1312109#post1312109
Bhups said:
could you please let me know the solution?
I got the EXACT same problem
thanks.
Click to expand...
Click to collapse
nothing to worrying.. just keep going..
when white screen appeared, i just continued to flash my phone by starting RUU application usually present in the rom folder along with the rom to be flashed..
it showed progress bar in the Computer screen {from 1% .... till 100%}while the PPC screen appeared white during this procedure..
and the flashing process reached to 100%, displaying CONGRATULATIONS on the Computer screen and PPC got restarted by itself with new ROM.
I have done flashing up to 20-25 times by this method.
Phone is WORKING like a CHARM.. NO PROBLEM AT ALL ..
Hello
New to this Forum and also new Xperia Xi user.
I've tried to upgrade the ROM from the current 1.02.931.3
to the Xperi3.01 WWE.
Whenever I try to run the ROM update utility I keep getting error 262.
After following the recovery instructions to the letter I still keep getting
the same error. Would be grateful for any advice. Have done soft and hard
resets but to no avail. One thing I noticed was that just after the initial
3 colour boot screen the words image file not found appear briefly on
the screen, however the .nbh file is in the same directory as the update utility.
Very new to all this, so apologies for any inconvenience.
Thanks and regards
Joe.
hardspl first?
Could you please expand? - Not sure what you mean?
Thanks
You gotta do:
fards said:
hardspl first?
Click to expand...
Click to collapse
Then you can:
skywreck said:
I've tried to upgrade the ROM from the current 1.02.931.3
to the Xperi3.01 WWE.
Click to expand...
Click to collapse
Look at the "Sticky" theads here and click on "Sticky: Hard-SPL for Xperia X1 - Released! ( 1 2 3 ... Last Page)" when you get there.
All the information you need is posted.
Hi
I am having issues with my HD - I originally got this from Telstra and every time I try and ROM it - the phone functionality won't switch on - it seems to only have the wireless working - the ROM itself does work and it doesn't matter what ROM I use.
I was hoping someone might be able to help me here, Thanks in advanced
AJK
moved to correct section
ajk34 said:
Hi
I am having issues with my HD - I originally got this from Telstra and every time I try and ROM it - the phone functionality won't switch on - it seems to only have the wireless working - the ROM itself does work and it doesn't matter what ROM I use.
I was hoping someone might be able to help me here, Thanks in advanced
AJK
Click to expand...
Click to collapse
your phone does not have the right SPL for the ROM. read the HD Flashing Guide and prep your phone for ROM flashing. once the first 3 lines of the bootloader (or the red section) looks like the picture of this http://forum.xda-developers.com/showthread.php?p=3638336#post3638336Bootloader you're ready to flash. goog luck!