Hello.
I think that would be better if we try to change the resolution of the device , instead of porting manila's etc. ..
Is it possible?
thanks ,bye!
PS : Translated by google !
By replacing the touchscreen or......???
If it were that easy, it would have been done already. You can change the dpi of your screen, but you can't go above the max resolution because that is hardware dependent.
dwizzy130
dwizzy130 said:
If it were that easy, it would have been done already. You can change the dpi of your screen, but you can't go above the max resolution because that is hardware dependent.
dwizzy130
Click to expand...
Click to collapse
I've seen programs for WXGA to VGA etc. But I haven't found a VGA to QVGA yet. That would be nice to mess with....probably end up HR though...lol
noellenchris said:
I've seen programs for WXGA to VGA etc. But I haven't found a VGA to QVGA yet. That would be nice to mess with....probably end up HR though...lol
Click to expand...
Click to collapse
That's because WVGA is just a variation of VGA, just adding a 160X480 rectangle of pixels to the bottom of the screen. VGA and QVGA are totally different. They are separated by a big hardware difference. I guess it might be possible (in theory) to downscale VGA to QVGA, but not the other way around.
dwizzy130
In the begining of time, when Diamond isn´t release (hahaha), and Manila alpha leaked, we can run this version in our QVGA using Nyditot_Virtual_Display.
Maybe this app can help you.
dwizzy130 said:
They are separated by a big hardware difference. I guess it might be possible (in theory) to downscale VGA to QVGA, but not the other way around.
dwizzy130
Click to expand...
Click to collapse
They have done it with ASUS P750, which had a VGA LCD, but stock QVGA system (WM6). Search for it, You can find that the cookers made a VGA ROM for it. But of course, other way around is impossible.
NYDITOT Virtual Display should help you
would it then be possible to use the xperia panel manager or does that has an other problem???
Related
If I could set Athena in real VGA would it work in VGA out mode in real VGA resolution too?
THX so much!
Here some pictures:
Normal and real VGA
bigsmart said:
Here some pictures:
Normal and real VGA
Click to expand...
Click to collapse
Great it works...great monitor indeed...))
*lol*
It´s my best *gg*
I got it running on my projector - 7ft Tomtom is GREAT!
OK, I didnt really use my XDA Exec (universal) in realVGA mode because the today page was just too small...
Now I havent tried it on the Ameo (Athena) yet, but it looks better from those pics.
My question, from the larger screen size, would you say the Athena was usable in daylight with realVGA mode on? Its hard to see the screen in daylight and the last thing you want to have to do is squint at tiny fonts.
hello, very good how do you change the resolution?
thank you
You install MvRTrueVGA.
... and SdkCerts
In other words:
1. Google for "MvRTrueVGA"
2. Follow the instructions...
hum thank you , so it was what i imagined, but they have a lot of bugs , lets see if there is one update soon
I wouldn't count on there being an update soon.
And "a lot of bugs" is matter of definition. Personally, I can't live without TrueVGA at all.
Hi in this thread I am really hoping that programers will
make this interface also for VGA devices..All this time I always
envy QVGA devices, because most programers only think about them..
We as VGA user can not enjoy the great interface program like that..
So please programer or skin makers..release for VGA devices also =)
So far I only found out pointui has make VGA version also
Come on all VGA users let us support programers to create
skin programs for VGA also in this thread =D
No response
VGA user feels okay?? without this cool interface program??
touchflo and itask allready support vga! the cube doesn't so I use mortbuttons, not so stylish but skin support and works good! also I think the new 3d cube is much slower than the old one.. I want the 0.4 cube with vga
TacoLoco said:
touchflo and itask allready support vga! the cube doesn't so I use mortbuttons, not so stylish but skin support and works good! also I think the new 3d cube is much slower than the old one.. I want the 0.4 cube with vga
Click to expand...
Click to collapse
Thanks for letting me know about mortbuttons
Yes I have tested ftouchflo and it works but there is only little bug..which when my I made my phone to sleep mode and wake it up again my phone will become smartphone =p can not use touch screen anymore..gotta soft reset..ugh
theme freak said:
Thanks for letting me know about mortbuttons
Yes I have tested ftouchflo and it works but there is only little bug..which when my I made my phone to sleep mode and wake it up again my phone will become smartphone =p can not use touch screen anymore..gotta soft reset..ugh
Click to expand...
Click to collapse
damn I thought the problem with the screen was a hardware issue (dell x51v) thanks very much maybe ftouchsl fixes this..
You can find the cube and tones of VGA cabs here:
http://forum.xda-developers.com/showthread.php?t=342039
teixeirabmb said:
You can find the cube and tones of VGA cabs here:
http://forum.xda-developers.com/showthread.php?t=342039
Click to expand...
Click to collapse
Thanks bro, its really a cool colection but the cube I want is the C++ edition
Which type of screen does wing has ? Is it VGA or QVGA ? The reason I am asking is, several programs are released in two resolutions and ask you to select one or another.
hoolahoous said:
Which type of screen does wing has ? Is it VGA or QVGA ? The reason I am asking is, several programs are released in two resolutions and ask you to select one or another.
Click to expand...
Click to collapse
It's QVGA.
thanks !
I recently hard reset my phone, as im still running the stock rom, it drives me up the wall having put back my theme mods.
So ive made a cab which will install:
flat black start/program bar today theme tsk (no more beveled bar)
large start menu background (if you have touchflow large start menu on)
flat black wallpaper
works great with Manila Rhodium VGA
Mirror: http://rapidshare.com/files/213475619/PLAzmA_Black_Mod_Pack.cab.html
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
z3ntn3l said:
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
Click to expand...
Click to collapse
the release by XBmod is VGA, it was originally ported from WVGA i belive, as long as you can find a version thats the right resolution it should run, no idea where you can get it maybe ask xbmod if the extracted it or has it in cab format.
z3ntn3l said:
So all those nice Rhodium Apps are not running on the Omnia, is that right?
But why? Because different Screen-Resolution or because its not a HTC-Device?
Click to expand...
Click to collapse
1. The Omnia has different graphics hardware than the HTC Touch Diamond-Pro series (which just so happens to be the same hardware on the upcoming second generation aka Rhodium and Topaz or Pro2 and Diamond2) which have an ATI chip. The Omnia has and Intel Xscale Direct 3D chip which is integrated into the CPU. I believe the Diamond and Pro's card is not and is totally separate.
2. The Omnia runs at 400x320 or WQVGA. The Blackstone runs at 800x480 WVGA as well so installing on the Blackstone was as simple as cabbing it up (which btw isn't so simple). The Touch Pro and Diamond run at 640x480 and porting Manila2 to these devices was hard enough.
3. There is already Manila 2D from the Touch 3G and Opal (iolite) working on the Omnia which is good enough. Check this out if you already haven't (http://www.modaco.com/content/i9x0-omnia-http-omnia-modaco-com/273892/complete-install-guide-for-manila-touchflo-2d-on-i900/)
thanx for this plazma. works great on my touch pro.
one request however, it works fine in portrait mode but not in landscape. is it possible you can add that in as well?
jonnrb said:
2. The Omnia runs at 400x320 or WQVGA. The Blackstone runs at 800x480 WVGA as well so installing on the Blackstone was as simple as cabbing it up (which btw isn't so simple). The Touch Pro and Diamond run at 640x480 and porting Manila2 to these devices was hard enough.
Click to expand...
Click to collapse
240x400 (i'm sure it was probably just a typo)
redd214 said:
thanx for this plazma. works great on my touch pro.
one request however, it works fine in portrait mode but not in landscape. is it possible you can add that in as well?
Click to expand...
Click to collapse
Try a soft reset, if it still doent work can you post a screen shot.
..........
WQVGA for Omnia
qmt49 said:
Unfortunately I only have a Diamond so this is VGA only. It probably won't look right on different resolutions.
Click to expand...
Click to collapse
Nice skin, it works on WQVGA but I needed to track down the HTC fonts for my Samsung and then make the sizes right.