I just bought a 2gb sandisk sd card
it is recognised by the magician but each time it switchs to stand by mode the "memory card" file disappears...So I have to take it out and to insert it again (two times) in order to see it again.
Is it normal ? or there's a problem with this card ?
thanks
:shock:
up
Good to read, Storage to the people!
Take a look @ the card params too. Somehow a magician communicates better with a fat(16) card than fat32.
Have fun, M
thanks for your comment...
I can only format the sd card with the magician because i don't have a sd card reader for my PC. But with the program I use (FORMAT) I cannot choose FAT 16 or 32 - do you know a soft to do this ?
PHM Pocket Mechanic is very good for this, available on trial
I just received my Sandisk Ultra II 2GB card and it's working fine with my S100 (1.12) and I didn't have to format it when I received it.
However I have just come upon a problem. The card works fine in my S100 and I can copy files to it via ActiveSync. In order to speed things up I just tried putting it in the card reader in my laptop which reported it as unformatted...
Got the Sandisk Ultra 2 2GB for my M500 and it works fine in the phone , my card reader however does not like it either.
However i have sd-cf adapter that i use with my camera , i sloted the sd card in to that and in to the card reader and it works fine at very high speed.
Hope that helps.
C.
Laptop doesn't have CF and I'm reluctant to allow it to format the card in case I suddenly have issues reading it in my S100. :/
hi, i ran a benchmark in my 512mb SD card (unknown brand - missing logo) with pocket mechanic and the results are: Read 5.1X and Write 0.6X. Is it bad?
ok my card reader on my laptop and my S100 must talk a different dialect of SD card because no matter what I do they can't work together.
If I format the card in my S100 and copy files via activesync the laptop reports the card as unformatted.
If I format the card in my laptop and copy files on my pocketpc can't see them.
Size doesn't fit to 2GB Card
Hi I just got my sandisk ultra II 2GB SD Card and at first it worked fine.
Magician recognized it as 2GB then i copied some files from my computer with my SD Card Reader. But after inserting the card into my magician i got some weird looking characters, files, and folders. So I inserted it again in my SD card reader and formatted the card. After that my pc and my magician doesn't recognise the card as 2GB anymore just 1GB .
Any help to solve this problem and to get my 2GB back ?
I too facing the same problem it is detecting as 1 GB instead of 2 GB also the after formatting sd card in card reader made i unformated for ppc and viceversa dam,anybody have a solution for this ?
hi, i've a wallaby and while i was updating my rom
the win firewall broke the process :!:
so i've to flash the rom by sd.
but how to put the rom image on the sd wich
is formatted not with fat 16 or 32 but with raw?
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
hi, i already watched this topic but my PC doesn't recognize
the wallaby by activesync and neither the xda tools is able to write on the sd card.
yesterday i read the sd only using xdarit but - strange
to say - that same program wasn't able to write on these sd!
May be the sd reader is usb 2.0 or the sd is locked because has already been written???
thanks jB
Hy
i've buyed a 4 gb sd (no sdhc) card
the name of the sd is MICRONICA (an Italian factory)
but my qtek 9090 with wm6 says in memory program/storage card : Not installed
How can i format it (there is a cab for formatting the sd direcly on qtek 9090? (i have not the card reader for pc...)
or a program to use the 4 gb sd card on qtek 9090 as the 1 gb (the last sd card was a 1 gb and goes well...)
thanks in advance
bye
Paolo
u dont need to install any cab to make it works.
If the sd card supported by ur BA, then it will shown in the Settings>Memory>Storage Card screen. Otherwise, I think u need to find another brand of 4GB SD card.
Anth
My sd is this:
http://www.micronicaitalia.it/download/SchedaTecnicaSD-card.pdf
paolone said:
My sd is this:
http://www.micronicaitalia.it/download/SchedaTecnicaSD-card.pdf
Click to expand...
Click to collapse
Best way to format the card would be (as you dont have the external cad reader) to go to a computer shop, look for a laptop with attached card reader and use it.
i have hp ipaq rw 6815 but when i upgarde this pocket pc the Remained in the picture
try to reflash but when putting a rom file into microsd / minisd use external USB card reader these in laptops have some odd tendency to loose files ! when card is removed too early
Tried HP official rom ?
Hi,
I have a new device HP Ipaq 914c Business messenger and I cannot write on SanDisk MicroSD Ultra 8 GB storage card through Active Sync or copy files from the device memory to the MicroSD card.
I can write files on my laptop using the USB adapter, files that are stored on the card can be easily read. Just writing anything inside WM 6.1 is impossible.
Is there something like a security setting in the OS?
Dean
The 69xx cannot read beyond a 2GB SD card. Perhaps its the same for this ipaq.