Hi,
I have a new device HP Ipaq 914c Business messenger and I cannot write on SanDisk MicroSD Ultra 8 GB storage card through Active Sync or copy files from the device memory to the MicroSD card.
I can write files on my laptop using the USB adapter, files that are stored on the card can be easily read. Just writing anything inside WM 6.1 is impossible.
Is there something like a security setting in the OS?
Dean
The 69xx cannot read beyond a 2GB SD card. Perhaps its the same for this ipaq.
Related
I just bought a 2gb sandisk sd card
it is recognised by the magician but each time it switchs to stand by mode the "memory card" file disappears...So I have to take it out and to insert it again (two times) in order to see it again.
Is it normal ? or there's a problem with this card ?
thanks
:shock:
up
Good to read, Storage to the people!
Take a look @ the card params too. Somehow a magician communicates better with a fat(16) card than fat32.
Have fun, M
thanks for your comment...
I can only format the sd card with the magician because i don't have a sd card reader for my PC. But with the program I use (FORMAT) I cannot choose FAT 16 or 32 - do you know a soft to do this ?
PHM Pocket Mechanic is very good for this, available on trial
I just received my Sandisk Ultra II 2GB card and it's working fine with my S100 (1.12) and I didn't have to format it when I received it.
However I have just come upon a problem. The card works fine in my S100 and I can copy files to it via ActiveSync. In order to speed things up I just tried putting it in the card reader in my laptop which reported it as unformatted...
Got the Sandisk Ultra 2 2GB for my M500 and it works fine in the phone , my card reader however does not like it either.
However i have sd-cf adapter that i use with my camera , i sloted the sd card in to that and in to the card reader and it works fine at very high speed.
Hope that helps.
C.
Laptop doesn't have CF and I'm reluctant to allow it to format the card in case I suddenly have issues reading it in my S100. :/
hi, i ran a benchmark in my 512mb SD card (unknown brand - missing logo) with pocket mechanic and the results are: Read 5.1X and Write 0.6X. Is it bad?
ok my card reader on my laptop and my S100 must talk a different dialect of SD card because no matter what I do they can't work together.
If I format the card in my S100 and copy files via activesync the laptop reports the card as unformatted.
If I format the card in my laptop and copy files on my pocketpc can't see them.
Size doesn't fit to 2GB Card
Hi I just got my sandisk ultra II 2GB SD Card and at first it worked fine.
Magician recognized it as 2GB then i copied some files from my computer with my SD Card Reader. But after inserting the card into my magician i got some weird looking characters, files, and folders. So I inserted it again in my SD card reader and formatted the card. After that my pc and my magician doesn't recognise the card as 2GB anymore just 1GB .
Any help to solve this problem and to get my 2GB back ?
I too facing the same problem it is detecting as 1 GB instead of 2 GB also the after formatting sd card in card reader made i unformated for ppc and viceversa dam,anybody have a solution for this ?
Hi,
I'm using MDA Vario (HTC wizard). I bought 2 Gig storage card. At the first time, my MDA was able to recognize my 2 Gig mini SD. Then I put the card on the card reader on my Laptop in order to copy some file. There was a comment on the dialog box in my laptop that my 2 Gig mini SD has not been formated and the dialog box offered me to format it. Then I clicked yes to proceed the formatting process.
Unfortunatelly, after I format my 2 Gig mini SD using my laptop; My 2 Gig mini SD could not be recognized by my MDA, but my laptop is still able to recognize my 2 Gig mini SD card.
Up to the present I have not been able to use my 2 Gig mini SD on my Wizard since I format it using my Laptop.
I also has formated my 128MB and 256MB mini SD cards using the same laptop and it works on my MDA.
Could you please help me to fix the problem?
regards,
Stones
try to re-format in your PC using FAT (not FAT32 or NTFS).
then the card should work in your PocketPC
My XP only gave FAT32 option for this mini SD. Tried to do that manually throgh DOS format and set the file sistem to FAT16, but still couldn't format it using FAT16.
mini sd
I bought a 2 gig card with no problems
reply
google up programs for formatting memory cards on the actual device and set it to the right format...if the program doesn't recognize the card, then you are in the same boat as I am
most likely cause is that you laptop cardreader is not capable of recognizig 2gb sd cards properly.
Therefore the laptop thinks the card is not formatted.
by formatting it you wreck the card (most likely not destructive)
Try to format the sd card in the wizard or another cardreader.
Hi,
i have a new sandisk 2GB microSD card in my hermes. Because i have no card reader for my pc i want to format the card in my hermes.
Is it possible to do so? I cant found any option for formating.
The hermes says in settings >> memory that no card is installed.
I thing it is because the card is unformated.
I do so, but there is no storage card.
The mobile device also says that there is no storage card.
I know that Resco File explorer can format the card but most cards are formatted fat by default. The Hermes at least recognises this. If you're not even getting the sd card recognised then there may be either a problem with the card or with the Hermes.
It would be best to just fork over a few bucks and get a card reader for the pc as if the pc is recognising the sd card that means that the Hermes may have a problem. Try formatting FAT32 anywaty then put back into Hermes. May work.
If the pc doesn't recognise the sd card, does happen that new cards go bang, then I'd suggest taking the card back and getting a new one.
Cheers...
8gB micro SD
Hello,
I have the same problem. My 1gB card works fine in my Hermes but the new 8gB is not recognized. Spec says phone can only take maximum of 2gB but other forums say can use 32gB. My latest clue is that the card was preformatted with FAT32 and the Hermes requires FAT. However FAT can only deal with Volumes up to 4gB. So I stumped.
If you read a bit further you'd realise that these people with 32 Gb cards run custom roms which have the patch applied...
There is a cab file running around that allows you to run sdhc cards on WM 5/6 but I can't remember what its called (try sdhc patch in search)...
Hello,
I bough a MicroSDHC 4 GB memory card for the prophet, but the only problem is It is not recognizing, some one told me that it is because of the file system of format, my 2 GB micro SD card have FAT format and 4 GB had FAT32 by default, so I reformated it in FAT and still I can't get it working, it's not regognizing.
Well, I saw a thread on web some where saying to download "driver" and install it on the non-supporting MicroSDHC device and it will start recognizing. Is it true?
Please help, if it is possible do tell me some decent way thanks.
FAISAL!!!!!!!
prophet doesnt support sdhc only recognizes sd.....their aint any driver support aswell
I have found this program:
http://www.foro-elrincondedey.com/p...as-tarjetas-sd-hc-funcionen-en-las-pda-2.html
I have instaled on my Qtec, but it doesn't work
what is the size of sd card that a o2 xda himalaya running windows mobile 6.1 to 6.5 can take. i have a 4GB sandisk ultra 15MB/S SDHC MEMORY CARD that does no get recognized when i insert it.
are there any workarounds or is it a certain way of formating it or just a hardware problem?
himalaya only run sd cards anything over 2GB are sdhc
I am using a transcend 4 gb sd card ( not sdhc ) which I bought of e bay last year.Also works in Alpine and Blue Angel
it also supports 4 GB card but sd card as per all above post
if u can't able to detect it then just clean out the contacts of the card & also clean the inner contacts in himalaya with clean paper...