Related
Hi folks,
i saw some threads in the development section for manila 2d (which really looks cool). I'm wondering if this works on my HTC Touch!? I'm also not sure if there is a cab install version available - or is a rom flash needed (don't want to do that again...)
has anybody already some experiance with manila 2d?
thanks for any information!
you'll notice that there's a thread a few posts down with the Title "touchFLO 2D on ELF" this is the same thing as Manila 2D. It's a simple cab install and works just fine.
Just try it you will love it.
Looks good, but it doesn't work as it should. On my Elfin Audio Mgr 2 doesn't start, system runs veeery slowly even after uninstalling TF2D (hard reset helps) and cable is causing system freeze :/
just tried it and it really looks cool! It works without any problems...
Sad thing is, that its not working together with any other today plugins...
Install SecondToday:
http://www.chi-tai.info/cs_wm_tools_im_cs.htm
nuke1 said:
Install SecondToday:
http://www.chi-tai.info/cs_wm_tools_im_cs.htm
Click to expand...
Click to collapse
yeah thats really cool! I have mapped the app to my camera button and so i can switch very fast - perfekt
Touchflow 3D
I also have some problems with this panel, after I installed it to my Xperia I have serious problems, it's look great but it's very slow and after open a few other panels my phone just block, I've to reset the Xperia and then I can go on, so I deside to uninstall it but now way it stay's, and after looking in my installed programms it is gone??? I can't uninstall it and I suppose that the only sollution could be a factory restore. I'ts a pitty it don't work like it should be cause I find it a great interface so if anyone could give us some advise they're welcome. I did install the second little program tf3d_panel but even that bring it to full speed and error free
manila on htc touch hd
As the title says, i run on my htc touch hd. where can i find a tutorial on how to install manila on this kind of phone step-by-step ? (tutorial for noobs as you may say) I am totally away from this phone technology and i've found a lot of posts but for htc touch and not touch hd. i want to know which files i must install, where i find them and how can i change the theme. Please, help a noob
Atharia said:
As the title says, i run on my htc touch hd. where can i find a tutorial on how to install manila on this kind of phone step-by-step ? (tutorial for noobs as you may say) I am totally away from this phone technology and i've found a lot of posts but for htc touch and not touch hd. i want to know which files i must install, where i find them and how can i change the theme. Please, help a noob
Click to expand...
Click to collapse
Atharia,
Just as nobody has replied and I don't want you to be left in the dark
Have you checked anything in the blackstone forum? That would be a more appropriate place for you to be searching. I understand you may have search for HTC Touch, and that would probabaly be why you came here.
On the other hand though, I think you're phone may actually come with what had been ported to this phone - don't quote me on that but I am sure that it had touchflo as standard?
Stu
Hi guys, has anybody idea, how to show today tasks on main Home in TF3D.
It's the last thing, what I need to be a happy user
Thats not possible ...
Beast-prag said:
Hi guys, has anybody idea, how to show today tasks on main Home in TF3D.
It's the last thing, what I need to be a happy user
Click to expand...
Click to collapse
I know, that it's not possible "normal" way, but when I see, what all of you can do, so it's piece of cake for you
I think that this problem has many users.
For some stupid reason that nobody understands, HTC has disabled anything from displaying on the Today screen if TouchFlo 3D is running. You can however go to Settings>All Settings>Personal tab>Today and deselect TouchFlo 3D, and then you can add Tasks or any other item that you like. But you'll have to scarify TouchFlo 3D for that, and use regular Windows Mobile. If anyone has a hack or registry fix, please advise. Thanks!
Hey guys,
Even though I don't have a Diamond or Raphael, I decided to take a stab at this one, because I've seen many people requesting it.
So, without further ado, here is the download link for the dumped Manila from the HTC Touch HD:
http://www.4shared.com/file/74338802/4bedbf7a/MBarvian_Blackstone_Manila.html
And if it doesn't work, the link to the Touch Pro TouchFLO 3D:
http://www.4shared.com/file/74338804/a28e1a4f/MBarvian_Raphael_Manila.html
Please report back with your findings!
Hi my friend, i´d like to try this HD Manila but your links don´t work, can u please upload somewhere else?
Cheers
ikow this is probabaly a dumb question..but if im runnin a FUZE with TF3D why would i want the Touch HD version?
is there significant differences?
Late,
Jstar
JstarLuvsTina said:
ikow this is probabaly a dumb question..but if im runnin a FUZE with TF3D why would i want the Touch HD version?
is there significant differences?
Late,
Jstar
Click to expand...
Click to collapse
yes, like the ability to customize manila (change order of tabs, etc.), (should have) a smoother experience, and a whole new stock tab!
updated links, should work now
mbarvian said:
updated links, should work now
Click to expand...
Click to collapse
Now all is fine, thanks
I´ll report my findings soon.
Cheers
mbarvian said:
yes, like the ability to customize manila (change order of tabs, etc.), (should have) a smoother experience, and a whole new stock tab!
Click to expand...
Click to collapse
ok..so its easier than the manila customizer to customizer?? and the stock tabs are better, how? what makes them better?
should i just shut the hell up and try it..its ok, u can say so
JstarLuvsTina said:
ok..so its easier than the manila customizer to customizer?? and the stock tabs are better, how? what makes them better?
should i just shut the hell up and try it..its ok, u can say so
Click to expand...
Click to collapse
that's ok!
it is very easy to customize. I believe it's in the Settings tab that you can change the order (left to right) of the tabs by dragging and dropping. Also, you have a stocks tab on your Fuze?
mbarvian said:
that's ok!
it is very easy to customize. I believe it's in the Settings tab that you can change the order (left to right) of the tabs by dragging and dropping. Also, you have a stocks tab on your Fuze?
Click to expand...
Click to collapse
"stock" like "stock quotes"? like dow jones..if thats what ur talkin about THATS ****IN FANTASTIC .. i could so use that, especially with the changes comming down the ladder in the next few months.
ok ok.. im downloading now
now i need a stripped ROM with out TF3D
mbarvian said:
Hey guys,
Even though I don't have a Diamond or Raphael, I decided to take a stab at this one, because I've seen many people requesting it.
So, without further ado, here is the download link for the dumped Manila from the HTC Touch HD:
http://www.4shared.com/file/74338802/4bedbf7a/MBarvian_Blackstone_Manila.html
And if it doesn't work, the link to the Touch Pro TouchFLO 3D:
http://www.4shared.com/file/74338804/a28e1a4f/MBarvian_Raphael_Manila.html
Please report back with your findings!
Click to expand...
Click to collapse
This's probably a dumb question, but what's the different between yours and the one release from Mun_rus?
http://forum.xda-developers.com/showthread.php?t=443777
Is this with the weather tab position fixed?
Thanks.
landscape mode supported? I'm waiting for someone that tweaks manilaHD with action screen from raphael to port it on xperia
BTW TOuch HD is WVGA. this one apparantly is for WVGA because I've tried and can't see all the bottom part.
arcanehacker said:
BTW TOuch HD is WVGA. this one apparantly is for WVGA because I've tried and can't see all the bottom part.
Click to expand...
Click to collapse
well aint that a slap in the sack..
im installing it now .. this outta be interesting to see on my FUZE
ok, i installed this app but i can't find the execute file in the programs menu?
I have the HTC Pro
touchflo3d
does it work on htc athena ?
didnt work at all on my Fuze.
had to hardreset to get my original back to normal.
ill wait..its ok
no go for diamond here, tap here to launch touch flo --> starting touch flo -- > repeat couple of times and then crashes.. darn..
hoankhang000 said:
does it work on htc athena ?
Click to expand...
Click to collapse
I'd like that answer too. Any perceived problems in just trying it anybody (assuming the device has hard SPL that is)?
Doesn't work
On my Athena (VGA, WM 6, original ROM) I tried the Blackstone TF3D, after install it went into a loop
1 - "Tap here to launch TouchFlo 3D"
2 - "Launching TouchFlo"
Then back to 1 again, after a few loops it froze
After complete uninstall of Blackstone, I tried the Diamond TF3D, all files copied but no setting, or program to launch, it also did not appear in Settings/Today/Items where it could be checked.
Was looking forward to giving some better feedback than this but neither TF3D runs at all.
arcanehacker said:
BTW TOuch HD is WVGA. this one apparantly is for WVGA because I've tried and can't see all the bottom part.
Click to expand...
Click to collapse
does this issue affect all tabs?
I was aware of this, but thought it would not affect all tabs
Heey!
I don't know if anyone is still using the original WM Dialer but me now with all the phonecanvas and stuff out there, but anyway..
Here is a skin I made..
Feel free to use
(I only use the wm dialer for making calls, for answering I got S2U2 which is great!)
In landscape mode some buttons got little graphic issues, but don't use lanscape my self..
Download cab and transfer to your device, run and softreset.
This is my first cab but I have tested it and seems to work fine.
(Uninstallable. From Remove Program's list as any other program)
Use at own risk! Your phone is not my responsibility!
http://www.megaupload.com/?d=7SXGLJLR
Enjoy
very nics for sharing i still use the WM Dialer think its snappy and less mem usage like the colors black and grey less mem usage ,.thank you
Best dialer skin I've seen, you should make one for the htc side to answer phone canvas like this, Thanks
Great!
Going to install this on my 6.5
Thanks!
EDIT: Worked out great!
Good job, thanks a lot !!!
is this only working on wm 6.5?
thanks for your quick answer
thanks
robsterr said:
is this only working on wm 6.5?
thanks for your quick answer
thanks
Click to expand...
Click to collapse
No, it's made for the original wm dialer in wm6.1.
I have not tested on 6.5 but WH33LSONFIRE did, so it seems to work on both..
No change to Dialer
Hi,
sorry if im missing something simple here but having installed the cab restarted device the dialer remains the standard wm one.
My Device is the diamond using latest orange rom.
cheers.
james
Great job! I've disabled the TF3D dialer, because the memory leak is in there. So now my diamond looks fresh again! Thx
really nice looking dialer, Ryon. thanks!!!
I like it a lot!
I don't use the WM dialer anymore (since slide-to-answer came along) but I'll add a link to this thread in my WM dialer skins thread.
Keep up the good work!
Davey101 said:
I like it a lot!
I don't use the WM dialer anymore (since slide-to-answer came along) but I'll add a link to this thread in my WM dialer skins thread.
Keep up the good work!
Click to expand...
Click to collapse
That's cool
And tanks for finding the solution for the bluetoothicon issue!
Working good on my Diamond (but BTicon is realy low res..) anyway better than nothing!
Beautiful skin. Can anyone upload to rapidshare? I can't access megaupload. It says the service is not available in my area.
Edit: Dont'worry. Got it now. Will test soon.
It looks a lot like the Pocketshield dialer.
Hi there guys
What's going wrong on my device when I don't see the back key image?
not compatible with 6.5
savior02 said:
not compatible with 6.5
Click to expand...
Click to collapse
I'm running it on 6.5 with no problems.
Biggzz said:
It looks a lot like the Pocketshield dialer.
Click to expand...
Click to collapse
does anyone know if it works with pocket shield bye the way cos this looks nicer than the one have to use with pocket shield.
hmm can upload the file to some other location? Can't download from the link
stevensp said:
hmm can upload the file to some other location? Can't download from the link
Click to expand...
Click to collapse
See attached.
Ryon, let me know by PM if you'd like me to remove this post.
Can both HTC Sense and WM Today pages coexist similar to the way SPB Shell works by have the Today page in the background?
There was a program called "TouchFlo Detacher" that I used on my Touch HD. Now I know this won't work with Sense, as it's designed to work with TouchFlo, but I'd imagine that it would be a simple change to put in the relevant class names for the Sense UI.
It replaced one of your softkeys with a toggle button so you could flip between TouchFlo and Today, and it was VERY fast! (It didn't close and later re-open TouchFlo - it simply hides it as Today is always in the background.)
Have a search for TouchFlo Detacher and ask the author if he'd be interested. He may ask you to beta test it for him
Edit:
Here you go - I found it for you...
http://forum.xda-developers.com/showthread.php?t=480475
Thanks Great starting point
Thanks Great starting point
SDBArbifox said:
Thanks Great starting point
Click to expand...
Click to collapse
You're welcome mate
Check this out
http://pocketnow.com/tweaks-hacks/ui-switcher-now-supports-sense-mobile-shell-titanium-more
4-in-1 switcher: TF3D/Sense, Mobile Shell, Titanium, Today screen
Looks good... "we discovered a very useful tool for switching between HTC Sense/TouchFLO 3D and Mobile Shell 3.5.x with a single tap of a shortcut"
Hope it works for u
bshakil said:
Check this out
http://pocketnow.com/tweaks-hacks/ui-switcher-now-supports-sense-mobile-shell-titanium-more
4-in-1 switcher: TF3D/Sense, Mobile Shell, Titanium, Today screen
Looks good... "we discovered a very useful tool for switching between HTC Sense/TouchFLO 3D and Mobile Shell 3.5.x with a single tap of a shortcut"
Hope it works for u
Click to expand...
Click to collapse
Looks good, but I personally don't like MortScript, so would rather a windows app, like the above-mentioned one.
I just recently installed M2D on my LG Incite and installed the communcations cab thing and got it to work but, after I had to hard reset and now I cannot figure out how to get the communcations tab to start working again. I dowloaded it onto my phone and just can find the icon under programs where it was before. Any help? Thanks!
*aww my first post! Look at how ignorent I was back then lol.
froggylover1345 said:
I just recently installed M2D on my LG Incite and installed the communcations cab thing and got it to work but, after I had to hard reset and now I cannot figure out how to get the communcations tab to start working again. I dowloaded it onto my phone and just can find the icon under programs where it was before. Any help? Thanks!
Click to expand...
Click to collapse
You shouldn't hijack threads.
I suggest you try one of the following...
http://forum.xda-developers.com/showthread.php?t=499578
http://www.lg-incite.com/
or keep googling
I am apologize but i cannot find an answer anywhere! I have tried googling for hours now and ive already seen that post. Thanks.
PurpleLlamaLover said:
I am apologize but i cannot find an answer anywhere! I have tried googling for hours now and ive already seen that post. Thanks.
Click to expand...
Click to collapse
Pretty sure you've figured it out by now eh?