Related
Hello, does the macro function (the switch near the lens) really work? I tried several pictures and can't see any difference between normal and macro.
I notice that I can't put the switch fully to the top (to normal mode) but easily full to the bottom (to macro). Maybe it's dispositioned and therefor it doesn't reach the macro function internally?
Works extremely well for me. You are trying to use it in a macro fashion right, ie trying to focus on something say < 15cms away?
V
vijay555 said:
Works extremely well for me. You are trying to use it in a macro fashion right, ie trying to focus on something say < 15cms away?
V
Click to expand...
Click to collapse
yes I am. I'm afraid by device has to go back to repair (just got it back today from another repair which lasted a month...)
Camera Macro
pietrucci said:
yes I am. I'm afraid by device has to go back to repair (just got it back today from another repair which lasted a month...)
Click to expand...
Click to collapse
This is sheer carelessness from your last repair. There is nothing broken on the camera zoom just that the back has been placed on and the catch on the casing has missed the toggle arm on camera. A simple 20 sec job which you could easily do yourself if it weren't for that VOID sticker. Give your last repairer a good talking to.
Mike
mikechannon said:
This is sheer carelessness from your last repair. There is nothing broken on the camera zoom just that the back has been placed on and the catch on the casing has missed the toggle arm on camera. A simple 20 sec job which you could easily do yourself if it weren't for that VOID sticker. Give your last repairer a good talking to.
Mike
Click to expand...
Click to collapse
If you mean the little sticker on top of the screw next to the camera on the right, this is already broken, by the HTC repairer I assume...
When I unscrew the back (4 screws) then I will be able to repair it myself you think? (first find the appropriate screwdriver).
Easy Repair
pietrucci said:
If you mean the little sticker on top of the screw next to the camera on the right, this is already broken, by the HTC repairer I assume...
When I unscrew the back (4 screws) then I will be able to repair it myself you think? (first find the appropriate screwdriver).
Click to expand...
Click to collapse
Yes it's an easy fix as there is nothing broken inside. Get set of phone screwdrivers from maplin or such like. Open phone bottom end first needs just a little bit of easing out as there are pop in connections all around. Tilt bottom edge up and with a bit of judicious wiggling it will pop off!. The problem will be immediately obvious. There is a small "arm" on the camera that fits into the movable macro switch on the case.
Easiest wat I've found to get them to match up is move both lever and and switch toward top of device and place back on by moving it straight down onto phone (not at an angle). Before putting screws in check switch moves fully and in good light you'll actually see lens and black ring moving in an out. Once full screwed up (forgive expression) you may need to press a little on top edge to get case to return fully into position.
Mike
mikechannon said:
Yes it's an easy fix as there is nothing broken inside. Get set of phone screwdrivers from maplin or such like. Open phone bottom end first needs just a little bit of easing out as there are pop in connections all around. Tilt bottom edge up and with a bit of judicious wiggling it will pop off!. The problem will be immediately obvious. There is a small "arm" on the camera that fits into the movable macro switch on the case.
Easiest wat I've found to get them to match up is move both lever and and switch toward top of device and place back on by moving it straight down onto phone (not at an angle). Before putting screws in check switch moves fully and in good light you'll actually see lens and black ring moving in an out. Once full screwed up (forgive expression) you may need to press a little on top edge to get case to return fully into position.
Mike
Click to expand...
Click to collapse
Many thanx, it works again!!!
As you said I lifted the bottom, played with the switch and it fell into place!
First I tried to remove the whole cover, but at the cameraside it didn't get off that easy and I was affraid to damage something. But then I solved it without lifted the whole cover. SO I'M VERY HAPPY NOW!!!
(by the way, is there a trick to get the whole cover off? Not that I want to do that at the moment...)
Pietrucci
Congratulations
pietrucci said:
Many thanx, it works again!!!
As you said I lifted the bottom, played with the switch and it fell into place!
First I tried to remove the whole cover, but at the cameraside it didn't get off that easy and I was affraid to damage something. But then I solved it without lifted the whole cover. SO I'M VERY HAPPY NOW!!!
(by the way, is there a trick to get the whole cover off? Not that I want to do that at the moment...)
Piettrucci
Click to expand...
Click to collapse
Knew you could do it, congratulations. The back is fiddly, it helps if you have the tool that looks like a flat blade screwdriver with a slightly bend tip - meant for providing a little leverage to pull the case out enough to release the click in clips. A blunt knife could also be used if you want to go down market. Steer clear of a sledgehammer though!
Mike
My flash is keep on or sometimes flashing. I don't know how to turn it off..when I take the battery out, it will off, but once I put the battery back, the light is on..
Anyone can help me? Thanks
Camera Flash on all time
I am facing the same problem... the flash keeps flickering n does not switch off.
It only switches off when turned on/off using the camera. Still after some time it switches on again...
I was told on on forum that it is a hardware problem. I am considering opening it and breaking the flash LED so it is gone
In any case the flash is quite useless as it does not make much difference to the quality of the picture :|
I had this problem as well. I called warranty service and they replaced my device
same here flashlight flashing like a disco
even when the device is off, and this is lame, any solutions?? seems only 1 of the 3 leds does that. please anyone can guide us on this? its a wizard
I too had this problem on one of my wizards. It is the camera flash board itself that is bad, not the main motherboard. I simply removed my flash, it was useless anyways. But now I know if I want to fix it I need to find a broken wizard and harvest its flash board. I was able to test this by putting a known working flash into the phone that was previously giving me problems and it work flawlessly.
To remove the flash:
1. Take off back battery cover.
2. Using a small flathead screwdriver carefully pry off the camera cover, it just clips into place.
3. Carefully pry up black housing around camera flash and camera lens.
4. Remove flash board from black housing.
5. Put it all back together.
Jeff
Of course, I am not responsible for whatever you do to your phone.
Can the hardware camera module on the T-Mobile Wing be removed without breaking the phone or the camera?
My situation is that I need to work in a place where camera devices (including those on mobile phones) are not allowed. I like to bring my T-Mobile Wing with me to work so one option given to me is that I need to damage the camera on the phone making it not workable. Though I don't really use the camera, in general I don't like to break perfectly working things, so I would like to find out if the camera can be removed.
Thanks.
Maybe
I would have to say "no dice" on that one scratching the surface. You can remove the camera module but you would also take out the speakers and I think the antenna as well but don't quote me on that.
Yes sir you can... just look up the repair guide to the Herald and it'll show you, with pictures, step by step how to completely disassemble the phone .
It's a PDF file and pretty much all you have to do is take off the 4 screws (voids warranty) and take it off carefully then just remove the antennae and then the camera and put back on the antennea... but I haven't opened my phone in a while so it could go either way .
hehe no way u can open up that little piece with the speakers and camera lens??? crazieness
Ok, jsut got this thing off of ebay, power it all up I notice someone has been inside. eh no real biggie.. I unlock it and test the major functions.. all works. Bring up the camera and holy crap its like looking through the eyes of a lawn gnome tripping off shrooms and acid.. take a look (attached)
I rewiped.. installed Fx Camera to see if it was a setting, and also wiped the memory card (which came with the phone.. cool!) I then turn around and see that the camera lens is cracked on the battery cover, however the lens inside looks pretty good. So, I'm thinking this is a hardware problem, but Im not afraid to try to fix it if its just a few dollars. Am I screwed?
whoah, thats a trip!
If you deem it to be hardware, I have a spare camera from a parted G1. PM if you want details
I may take you up on that, however I am searching google right now to see if you can even replace the CCD
The camera module is on a ribbon cable that attaches to the motherboard, easily removed. So long as the component damaged is not on the mainboard itself you should be fine.
That's what I like to see!
You have a PM
If you plan on taking it apart yourself you need to be extremely careful, i took mine apart to replace the case when i bought it and after putting it back together everything seemed fine but after a while the touchscreen kept dying the camera never worked and my signal dropped all the time, i tried taking it apart and putting it back together several times to no avail. The phone became unuseable and i shelved it for my D600... bad times. It was only until i was going to send my G1 to a phone recycle website that i opened it up one last time, after doing nothing different and putting it back together its for some reason worked ever since. Just a word of warning hope whatever you do works out ok - Adam
Thanks for the warning! Someone already has been in the camera before.. I am going to assume that it was to take a peak at the camera lens so I am not afraid of voiding the warranty. It's no new adventure for me, I have been inside multiple phones and other small electronics, but thank you again. It never hurts to be redundant when opening any electronic device.
PM returned
When disassembling, I like to modify the HTC manual a bit. I remove the back plastic, and the coaxial cables (be VERY CAREFUL when reassembling, they always get pinched!). Then, remove the connectors as instructed EXCEPT the camera. Now, lift the camera portion, as well as the IMEI sticker as a whole module. They are just taped down. When lifted up fully, now you can spin the mainboard out of it's hooks and remove the entire assembly. This was the difficult connection to the camera stays intact. Makes reassembling much easier too, as it will self align.
If you haven't read/downloaded the G1 service manual, you need to!
http://mikechannon.net/PDF Manuals/HTC Dream SM (A04).pdf
Whoa! My first phone that has a manual!
FTA:
"This document contains highly confidential information, so any or all of this document should not be revealed to any third party."
HAHAHAHA!
h1p1n3 said:
Ok, jsut got this thing off of ebay, power it all up I notice someone has been inside. eh no real biggie.. I unlock it and test the major functions.. all works. Bring up the camera and holy crap its like looking through the eyes of a lawn gnome tripping off shrooms and acid.. take a look (attached)
I rewiped.. installed Fx Camera to see if it was a setting, and also wiped the memory card (which came with the phone.. cool!) I then turn around and see that the camera lens is cracked on the battery cover, however the lens inside looks pretty good. So, I'm thinking this is a hardware problem, but Im not afraid to try to fix it if its just a few dollars. Am I screwed?
Click to expand...
Click to collapse
My phone just started doing the same thing. I flashed the ADP image to see if it was a bug with the ROM I was using, only to find that it was still all crazy looking. Contemplating if I should try the repair or warranty exchange my phone again, ugghh
mine's doing the same suddenly, according to this: http://www.fixya.com/support/t2307654-htc_g1_camera_takes_pictures_messed_up
it's called solarization but how does one turn it off without a hard reset?
I downloaded the Snap Photo app which allows turning solarization on or off but it makes no difference
Any know how to fix this?
starting to look less and less like hardware
Anyone know how to switch this back to normal?
Hate to say it, but I do not see anything that would point this to software. First, if it was a setting or something software related, it would be resolved by the factory reset.. Heck, flashing the rom like JackSlim did would have reset any bad stacks or drivers.
I did find that post by fixya initially and quickly dismissed when I noticed that 1. Fixya blows... 2. there was no resolution 3. this is the same behavior that digital cameras get when the ccd or cmos goes bad..
PLEASE correct me if Im wrong, I would rather be
h1p1n3 said:
Hate to say it, but I do not see anything that would point this to software. First, if it was a setting or something software related, it would be resolved by the factory reset.. Heck, flashing the rom like JackSlim did would have reset any bad stacks or drivers.
I did find that post by fixya initially and quickly dismissed when I noticed that 1. Fixya blows... 2. there was no resolution 3. this is the same behavior that digital cameras get when the ccd or cmos goes bad..
PLEASE correct me if Im wrong, I would rather be
Click to expand...
Click to collapse
After reading the post of Fixya I went into Camera Magic and played with some of the setting and couldn't change it back to normal
Unrooted my G1 today, back to stock Donut DRC83, still the same issues, so I'm pretty sure it's not software related. Since I've had the same issue on the latest Cyanogen build, the Android Dev Phone build & the stock Donut build.
Called T-Mobile to get a warranty replacement, so I'm $9.99 and a couple days away from having another phone.
That's my fix anyways
I hope anyone not covered under a warranty is able to find a solution, my guess is you would have to replace the camera itself as Speed mentioned in one of the earlier posts, so look for a parted out phone or a aftermarket parts store and good luck with opening up the phone
As soon as money goes into my paypal account and I replace it I will post my results. Heck, if anyone is interested I will do a step by step for future reference. With pictures taken from a working camera, of course.
The only reason I am thinking software is that it seems like it is occurring to a few people all of a sudden where a week ago none of us had heard of this. I had a accelerometer problem with a G1 and I took it back to the RC29 rom and everything trying to fix it, it never would work. Sent it to HTC and they reflashed it...worked fine. They said there were no hardware issues. That makes me think there must be a bit of software that isnt getting replaced (like bios on a pc?). Perhaps what is going on is hardware..just hard to say right now.
The camera itself may have some firmware that is corrupted. Also possible that there's a fried transistor somewhere along the line. Could even be something really simple, like a bad ribbon cable or connection.
Cheers for Manual link
will greatly help when I swap over from black case to white case
( sticky keys and a mate wanted white one sooo $30 AUD for an complete white kit and hoping for sucsessfull fixed KB glitch )
note that you will still have black buttons for volume and camera, as well as memory card cover. That is what kept me from changing colors on mine- I went with a black replacement case so I didnt have the wrong colored buttons
I'm on my 3rd Epic, and this one is going back, too.
Before I send it back, I'd like to disassemble it. I think that the current problem (speakerphone returns static to whoever I talk to) is a soldering issue and may be easily debugged and fixed if I could open up the phone.
Opening up this guy is not easy.
I can remove the visible screws.
I can remove the two screws hidden under the serial number sticker / battery mat.
Even after removing these screws, I can't get the back plate off.
How do I do it?
IBNobody said:
I'm on my 3rd Epic, and this one is going back, too.
Before I send it back, I'd like to disassemble it. I think that the current problem (speakerphone returns static to whoever I talk to) is a soldering issue and may be easily debugged and fixed if I could open up the phone.
Opening up this guy is not easy.
I can remove the visible screws.
I can remove the two screws hidden under the serial number sticker / battery mat.
Even after removing these screws, I can't get the back plate off.
How do I do it?
Click to expand...
Click to collapse
Opening it voids your warranty and you will be unable to return it if your repair fails.
scriz said:
Opening it voids your warranty and you will be unable to return it if your repair fails.
Click to expand...
Click to collapse
It only voids your warranty if they can tell you opened it. I haven't run into any tamper-proof stickers.
So do you know how to get into it farther, or were you just poopoo'ing my attempt?
IBNobody said:
It only voids your warranty if they can tell you opened it. I haven't run into any tamper-proof stickers.
So do you know how to get into it farther, or were you just poopoo'ing my attempt?
Click to expand...
Click to collapse
lmao @ ====> or were you just poopoo'ing my attempt?[/QUOTE]
hilarious!
http://www.chipworks.com/samsung-epic-4g.aspx Shows some pics of it disassembled. Maybe it will provide some insight as to how to open it, and maybe not. Better than nothing. Try searching Samsung Epic teardown and digging a little deeper than the first page.
los1223 said:
http://www.chipworks.com/samsung-epic-4g.aspx Shows some pics of it disassembled. Maybe it will provide some insight as to how to open it, and maybe not. Better than nothing. Try searching Samsung Epic teardown and digging a little deeper than the first page.
Click to expand...
Click to collapse
Searched disassembly, not teardown. Thanks.
The link actually helped.
The Epic has 2 microphones?
start up at the top by the power button and use something plastic to wedge between the pieces. DONT user metal, it will scratch or break something.
Kcarpenter said:
start up at the top by the power button and use something plastic to wedge between the pieces. DONT user metal, it will scratch or break something.
Click to expand...
Click to collapse
I've found a teardown picture that illustrates the difficulty...
https://fjallfoss.fcc.gov/eas/GetApplicationAttachment.html?id=1311529
The problem was the two tabs. I didn't realize how long they were.
There are clips where the back casing sticks to the silver band around the phone. You have to use a thin flat head to separate it. Be careful since the silver band is made of plastic and will crack if bent.
I had to take apart 2 Epics and swap out a faulty keyboard with another one before returning it.
arashed31 said:
There are clips where the back casing sticks to the silver band around the phone. You have to use a thin flat head to separate it. Be careful since the silver band is made of plastic and will crack if bent.
I had to take apart 2 Epics and swap out a faulty keyboard with another one before returning it.
Click to expand...
Click to collapse
Once I saw how the back cover was snapped on (wide indents that snap to the silver), I was able to remove it. I used a credit card, sliding it down from the volume button, parallel to the phone. Every so often, I'd use the card as a wedge to pry the top off. Eventually, it snapped open.
Unfortunately, I am unable to find a problem. The main microphone works. It just doesn't work in speakerphone mode.
Oh well... I'm on my 4th Epic. I'm holding off on returning them to Amazon. I'll have 3 of 'em sitting around in case I need to make a FrankenEpic.
Do you see any way to tighten the screen slider?
Sent from my SPH-D700 using XDA App
Hey, if/while you're still in there... do you see a MLF-type chip (these are the ones that look like a plastic box with no visible pins because the metal pads are entirely on the underside) that's approximately 3mm x 4mm that has something like "FSA 9480" (or just "9480", or even "Fairchild") written on it? Probably near the USB port? I've read about its existence inside the Epic (and all Galaxy S models), and it seems to be getting enumerated by the kernel during bootup, but I didn't see any actual chip bearing the name in any teardown pics I've looked at. I'm starting to suspect that the "9480" *might* just be IP that Samsung licensed from Fairchild and incorporated into one of their own ASICs (with "9480" being the "IP name" of the chip Fairchild sells as the 9280), but it's really hard to tell.
For anyone who didn't see my other post, or the thread in the I9000 board, the FSA9480 is a USB switch that enables the USB port's two data pins to be repurposed for a) serial UART Txd and Rxd, b) Stereo audio left and right out, c) mono headset with audio out and mic in, and d) JTAG via a special interface called "JIG" that's kind of like Atmel's Debugwire and serializes the various pins of a JTAG interface. It's not actually using USB... it electronically disconnects the two pins from the USB interface, and connects them to the audio/uart/JIG pins elsewhere inside the phone.
Also, if you can see anything that resembles a manufacturer or part number for the USB port, that would be awesome. I know that someone, somewhere HAS to make them, but trying to find nonstandard, offbeat connectors in the millions of items sold by companies like Digikey, Arrow, Avnet, Mouser, etc. is like looking for a needle in a haystack unless you already know the exact part number you're looking for.
didnt really llook too hard, but i didnt see any
How difficult is it to replace the entire screen/lcd? Is it possible to easily remove the entire top off the slider and replace it?
Yes its rather easy you take off the back cover use something like a guitar pick to pop the back snaps apart then from there undo the connections to the main board remove it a few more screws under the sticker and one under the main board i think there is a ribbon cable you have to be genital with they rip really easy also make sure its put back the way it needs to be.. when replacing the screen there are tear down guides all over the new that show it in detail...
Edit: Found a Video for you... http://satmedia.co.uk/sprint-samsung-epic-4g-galaxy-s-sph-d700-take-apart-tear-down-video-mpg/
Chabsin said:
How difficult is it to replace the entire screen/lcd? Is it possible to easily remove the entire top off the slider and replace it?
Click to expand...
Click to collapse
Pry bar and hammer should do it!
Sent from my '' Bag Phone ''