Related
Hello, I have some problems with my mob.phone HTC HD2: after using Flash mobile stop working, then I tried install windows and tried turn on first time and my phone shows white screan with name HTC and don`t work at all,then i tried reset and Hard reset all setings and turn on again and than screan appears again with name HTC.
When i conect my phone to pc by usb, so my pc can`t find that phone.
Can you help me with this problem.
Thank you.
you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh
copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh
phone off
hold volume down
tap power (keep volume held)
phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.
Thanks for Help.
Same problem......
I am also stuck in the white HTC screen, (R 2.06.51.07 G 15.30.50.07U D 1.66.76641). I can flash from SD card and so i tried, using the image in the latest official RRU, no way, it doesn't fix the problem.
I didnt try any unofficial rom, i just updated to the latest rom from HTC, it worked fine. The problem occurs after i had to restart the phone while trying to connect to a xifi AP...
Any idea what i should try now ?
Thanks. You saved my day.
samsamuel said:
you should get your stock rom, ONLY your stock rom, extract the file ruu_signed.nbh
copy that file to your sd card formatted to fat 32 rename the file to leoimg.nbh
phone off
hold volume down
tap power (keep volume held)
phone should boot to three colors screen and start to flash.
this will ONLY work with original rom.
Click to expand...
Click to collapse
OMG! Thank you so much! I love you!!!!!! I was stuck on boot because my flash failed and i followed your instructions and now i can flash again!!! i was so worried and if it weren't for you i would be screwed. Really you are a HUGE help! Keep the good work up
how long did you guys have to wait till the htc rebooted after that flash? cause ive been waiting for over 30 minutes and i thought i made that wrong.
Note: ive used HSPL fist, then flashed it with energyleo.23547, but energyleo kept stuck in bootloader
now im pretty afraid of loosing manufactors warranty ...
well lads, pay attention: ive fixed that my problem all by myself. HINT: ive kept holding the buttons for to long, so the device got stock while starting up. so dont press the voldown-button for too long, maybe only for 2 seconds!
hard reset
Remember boys and girls - if you get stuck on the bootloader you can also do the following:
1. Remove the battery to turn the phone off, leave 3 seconds
2. Replace battery and hold down the vol down button and turn on your device to get into the bootloader
3. It should say 'serial'. Plug your USB cable in and it'll change to 'USB'
4. Flash your stock ROM as normal using ActiveSync method. This will also reinstall the SPL (in the case of people who can't get past the first white HTC screen). I did this after the first (and only) time I tried to do it the SD card method. Put my stock SPL back on my phone
EddyOS said:
4. Flash your stock ROM as normal using ActiveSync method. This will also reinstall the SPL (in the case of people who can't get past the first white HTC screen). I did this after the first (and only) time I tried to do it the SD card method. Put my stock SPL back on my phone
Click to expand...
Click to collapse
im pretty sure that flashing over usb won't do the spl. only sd card flashing can touch the spl.
When I tried to flash (after installing HSPL) using the sd card method and it bricked I went into the bootloader and it put my stock SPL back on - hence why I said if the sd card fails
EddyOS said:
When I tried to flash (after installing HSPL) using the sd card method and it bricked I went into the bootloader and it put my stock SPL back on - hence why I said if the sd card fails
Click to expand...
Click to collapse
I'd be inclined to suspect that In your case the spl was flashed during the failed sd card flash, so was already stock spl when you then flashed the stock rom over usb.(which of course being stock doesn't need hspl )
Hi Guys
I'm having the same problem, however, I bought the phone second hand. My question is how do I find out what my stock ROM is?
cheers
buddyrich_1 said:
Hi Guys
I'm having the same problem, however, I bought the phone second hand. My question is how do I find out what my stock ROM is?
cheers
Click to expand...
Click to collapse
you download HSPL, run it, and if your spl is anything else than 1.42 it will give out an error and no harm is done
Hey
Thanks for replying. Do I get the stock ROM from the HTC website, is there a way to get it as a .nbh file as I am currently on a mac.
thanks
Tokolosh said:
you download HSPL, run it, and if your spl is anything else than 1.42 it will give out an error and no harm is done
Click to expand...
Click to collapse
White Screen and HTC logo
I have found a similar problem, I flashed the HSPL rom following the instructions to the letter in the NOOB section.
Restarted my HTC HD2 having hard reset, and it would start and begin the installation and setup, once the setup completes, the software requests a soft reset, at this point my phone hangs on the white boot up screen with the HTC logo.
What am I doing wrong?
Stuck on White HTC Screen after ROM update
Why is it that, having run the HSPL update on my HD2 and checked that its successful, does my phone hang on the white HTC boot screen when it reboots after setup.
I have installed the energy rom, the most recent version. It still hangs at the boot after the rom does the soft reset...
Help please?
jrmgolem said:
Why is it that, having run the HSPL update on my HD2 and checked that its successful, does my phone hang on the white HTC boot screen when it reboots after setup.
I have installed the energy rom, the most recent version. It still hangs at the boot after the rom does the soft reset...
Help please?
Click to expand...
Click to collapse
you have installed the required radio yet?if not, boot to bootloader, flash teh radio via usb, , , restart the phone.
samsamuel said:
you have installed the required radio yet?if not, boot to bootloader, flash teh radio via usb, , , restart the phone.
Click to expand...
Click to collapse
I have now installed a 'Leo_RADIO_15.31.50.07U_2.07.51.05 **(from HTC **???? )' then re-installed the Energy Rom, but still getting stuck at the white boot screen after the first reboot, so I have now done a hard reset and the phone still hangs...
Any more ideas?
Before I call TMo and play dumb, this being my first Android and all, I just want make sure this is Bricked.... :/
Playing around flashing different radio, SPL, recovery... etc I was in the middle of flashing a sappimg.zip and it started tossing Fail-PU all over at that time I was still in fastboot and still able to keep trying again and again but, then I made the mistake of unplugging it and doing a battery pull.
Now it does not turn back on. It does charge, it's fully charged now (goes from Orange to Green) but as soon as I touch the power button the LED goes off and I can't do a thing till I do a battery pull.
The only thing I can do is get the LED to go blue by holding the trackball and hitting power <end call>. But I've searched arounnd and can't find anything to do in this 'mode'.
So.... Bricked?
Yes sire....
Yup. You have a brick. What spl and radio combo were you using (or trying to use) during the flashing process? What instructions were you following that was too difficult to follow?
I guess the guy would have expected some hints HOW to "convert" his brick back to a phone. Or at least some comment - what's the blue-led mode (hboot?) and if that can help somehow?
This said, I'm shamefully accepting myself being dumb and bricking my phone just an hour ago... I only managed to reflash the hboot image .2005, and afterwards the phone is stuck.
I've followed this thread:
http://forum.cyanogenmod.com/topic/...r-new-radiospl/page__view__findpost__p__96630
my bad I must have made sure my recovery works at least...
Binary100100 said:
Yup. You have a brick. What spl and radio combo were you using (or trying to use) during the flashing process? What instructions were you following that was too difficult to follow?
Click to expand...
Click to collapse
i dont recall what i was doing at this point but, i think i was flashing between the 3/22 and the 2.22 radio and back and forht between the 2010 SPL and the Stock 3009? it think it was
i think i'm just getting too mixed up in here with what seems to be 3 or 4 different myTouch flavors out there, w/o a jack, w/ a jack, 32A, 32B... one rom for 32B will work fine on 32A but one for 32A will bomb out on a 32A if there a wrong radio/spl etc......
i think in the end i was trying to flash a 32A to my new v1.2 32A w/jack and it failed, i then tried to recover it with the update.zip on my goldcard and thats when it blew up with thte FAIL-PU ... ... .... brick.
on another note, that night i called TMo to get a replacement, it showed up Next day. start to Root it again and try another ROM, managed to do that fine had Cryogen up and running then tried another one i think it was a 32B yoshi's or somethign ... not sure it also worked fine.
then i noticed i could not get out of headset mode, i quick search nad fown it was a known issue probably hardware ehhh, so i'm using the RUU to flash it back to Stock before calling to get another replace ment and blam FAIL-PU all over WARNING then... brick....
so now we're on myTouch 3G 1.2 #3 and i think i'll leave it alone for now and let the daughter really get to use her phone for a while..... before i b rick it again
i bricked my second one. Got the warranty one in the mail today. Not gonna mess with it this time. Thats what my HD2 is for.
Got my nephew's HD2, it's stuck at the stick together screen. I believe he had the second to last stock ROM, not the most recent. I can get into the boot loader and SPL is 2.10. I was able to flash the latest stock rom 3.14 from via usb but no luck. I get Update complete, Update success when I flash via sd card, but still no luck. When I attempt to Task it, it gets about 19% and says "image file is corrupted, Please check you update utility" and "Error [270] : update error" and the phone reboots. I'm gonna try to flash hspl3 and an energy rom and see if it'll come back..what else should I be doing? I heard I had to wait 10 min after I get success when I flash via sd before I manually reboot, is this true? thanks...
mr1ncred1ble said:
Got my nephew's HD2, it's stuck at the stick together screen. I believe he had the second to last stock ROM, not the most recent. I can get into the boot loader and SPL is 2.10. I was able to flash the latest stock rom 3.14 from via usb but no luck. I get Update complete, Update success when I flash via sd card, but still no luck. When I attempt to Task it, it gets about 19% and says "image file is corrupted, Please check you update utility" and "Error [270] : update error" and the phone reboots. I'm gonna try to flash hspl3 and an energy rom and see if it'll come back..what else should I be doing? I heard I had to wait 10 min after I get success when I flash via sd before I manually reboot, is this true? thanks...
Click to expand...
Click to collapse
In order to flash from SD you need HSPL, I would slap hspl3 on there and then flash the stock ROM of your choice.. and if you dont want HSPL to stay, you can flash the stock Rom from SD and it will overwrite HSPL with the SPL for that Rom.
Ok, so I flashed HSPL 3, then flashed the latest energy Rom but had no luck with that, just hung at the boot screen. So I then flashed the stock ROM again from the SD card and no luck again. I'm starting to think there is a hardware problem. He told me before the battery got "really hot" before it crashed. Also, with the original "dead" battery in, when i plug it in to a charger, I get no charge light, but the phone comes on immediately without me pressing anything and hangs at the stick together screen. Battery pins are ok, compared to mine, not interested in trying his battery in my phone.
im having the same issue, im beginning to think its an internal memory issue because it will inconsistently flash sometimes hanging on 74% or 12% error out, then with nothing changed it will take the entire flash and just not boot with an energy rom it will however vibrate 7 times when stuck on the flash screen of the energy rom
Ok guys try doin this real quick..
First post what your bootloader shows.
Then remove SD and Sim.
Then, enter bootloader again, sync to PC and perform task29 followed by a hard reset.
Now try flashing stock 2.13 ROM (from bootloader)
-If that doesn't work try removing hspl and then flash stock.
no dice flashing task29, i flashed then hard reset then tried to flash energy, it still hangs on random install %'s...redid the task29 and tried stock no dice, removed hspl and tried stock but wont even get past 0%
this phone was screwed from jump street though, stock original rom froze right out of the box...im thinking corrupt internal memory
well right now my bootloader says:
PB81120 MFG SS-B3
SPL-2.00.1000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
but that's because I just tried this:
http://forum.xda-developers.com/showthread.php?t=668347
so gonna bring it back to current factory ROM in just a min and then see. I can flash whatever ROM, SPL, or HSPL I want just wont get past boot screen regardless. I can even task 29 with HSPL3. Not sure what else? maybe the order of steps I'm taking.
Edit: well I could flash back and forth tried using HSPL3 with 2.00 support and get critical error so prolly dead for sure now...glad it aint mine RIP HD2, still happily take any suggestions on getting it running again tho...and thanks again for the help...maybe a goldcard? but i'm not quite sure how that works...
Okay, finally made it back to latest factory ROM 3.14 from SD card, so now I'm back to SPL-2.10.0000
but still no boot....not sure what to do...
im having similiar issues with it not booting, i think i have a hardware issue as well.. but this seems to do the trick for me when tryin to boot..
if flashing is successful but you are stuck at the "stick together" screen (with or without the 3 version numbers in the bottom left corner), do these steps:
1. take out the battery
2. wait AT LEAST 5 minutes before putting the battery back in (some have reported waiting 10 minutes minimum)
3. put the battery back in and turn the phone on
4. phone should boot up into windows within 2 minutes.
5. If it doesn't boot (within 5 minutes), repeat steps 1 through 4. (sometimes for me it takes 2 rounds of this for it to boot)
i'm not sure how the internal memory works, but I would sure like to know.
it seems the battery needs to be removed for a few minutes to "erase/empty" out the internal memory data (possibly corrupt data). It is possible my hardware causes some internal memory corruption, because when the phone boots, it works perfectly until some 'random' system crash occurs.
Oh, So I tried to load up a stock T-mobile ROM and it wouldnt load. I used VBNROM reloaded 2 (the ROM stripped down for Android use), loaded up first try.. which makes me wonder if its a particular sector on the internal flash memory that is corrupt?
The order I used entering into bootloader before each step (with phone off, hold down vol down button while plugging in USB cable thats connected to PC)
1. HSPL3
2. task29 (make sure microsd card and SIM card are NOT inserted)
phone is off. unplug sync cable.
3. insert microSD card that has the VBN rom correctly renamed leoimg.nbh for memory card flashing.
4. hold vol down button and power on. keep holding the vol down button until you pass the tri color screen into a gray color screen that says "loading..." then release the vol down button, follow the instructions to flash from memory card.
5. once successfully updated, take the battery out for 5 minutes, take out the SD card.
6. replace the battery, and turn the phone on.
7. phone should go to "stick together" screen, then show the red numbers in bottom left corner, then show a black screen with animation "clarity" text. Once you see that you know it will work
try that and tell me if that works for you to boot. if it does, then there must be a internal memory issue. (this rom is only 75 megs!)
EXTRA NOTES:
- it's possibly SIM card related too.. Phone had sim card and sd card with vbnrom successfully installed. i had loaded up android successfully, then shut down the phone. I tried to boot the phone again, but the phone went pass the 'stick together screen' then to a black screen and restart it self, then stayed at the stick together screen. This was remedied by taking the SIm card out, and trying again.
- with SIM card not inserted and phone successfully in windows mobile, put phone into flight mode, turn off phone, insert SIM, turn phone on. THis booted the phone for me.
mr1ncred1ble said:
Okay, finally made it back to latest factory ROM 3.14 from SD card, so now I'm back to SPL-2.10.0000
but still no boot....not sure what to do...
Click to expand...
Click to collapse
Just for kicks, try to remove the SIM and SD Cards to see if they change anything.
Also, if the above post works, you can install Android on your SD Card and you will still have a working phone? Better than a paper weight...
nothing regardless sim or sd is in or out just Stick Together and no red numbers...Gonna leave the battery out for a while and see but not holding out much hope..just don't get why i can get to the bootloader no prob and flash whatever, task it but the os won't boot...
Okay, with no sd or sim inside the phone, I flashed HSPL3, Task 29, then Radio 2.10.50.26 (same one that's on my hd2), then VBNROM, Hard reset and.. everything went surprisingly smooth but still not booting.. gonna leave the battery out for a while but it was dead when I got it sooo...we'll see..I did that all via USB, would it make a difference if I used SD card for each step? idk..
thanks again guys
mr1ncred1ble said:
Okay, with no sd or sim inside the phone, I flashed HSPL3, Task 29, then Radio 2.10.50.26 (same one that's on my hd2), then VBNROM, Hard reset and.. everything went surprisingly smooth but still not booting.. gonna leave the battery out for a while but it was dead when I got it sooo...we'll see..I did that all via USB, would it make a difference if I used SD card for each step? idk..
thanks again guys
Click to expand...
Click to collapse
when phone is off, can you charge the battery? (orange charging LED)
it's good idea to have full battery while flashing and all this booting nonsense
when it's stuck on Stick Together and i plug the charger in, i do not get the orange led but, i do believe the battery is charging. when i got it, it would not even come on with that battery. after leaving it pugged in like that for a while it came on reliably. could a low batt. cause this type of problem?when i started working with this phone i was using my fully charged batt. and having same results. been using his batt. since it charged. could his battery be good or bad? the only way to tell for sure is to put his batt. in my phone and see if its charging. should i be concerned about his batt. damaging my phone? the owner seems to think the battery caused his problems cause it got "very hot" before it stopped working.is no led a sign of a hardware problem?
mr1ncred1ble said:
when it's stuck on Stick Together and i plug the charger in, i do not get the orange led but, i do believe the battery is charging. when i got it, it would not even come on with that battery. after leaving it pugged in like that for a while it came on reliably. could a low batt. cause this type of problem?when i started working with this phone i was using my fully charged batt. and having same results. been using his batt. since it charged. could his battery be good or bad? the only way to tell for sure is to put his batt. in my phone and see if its charging. should i be concerned about his batt. damaging my phone? the owner seems to think the battery caused his problems cause it got "very hot" before it stopped working.is no led a sign of a hardware problem?
Click to expand...
Click to collapse
from my experiences, i know the phone is charging when: 1. phone is off with battery inserted, 2. plug in charger, 3. wait for orange charging LED light to come on.
when you plug in the charger while it's stuck on the "stick together" screen, no light will come on, and I don't think it's charging when this occurs.
It's charging alright. Took the battery out of the dead hd2 and put it in mine. It was pretty low 3% or something. Took it out put it back in the dead hd2, plugged it into wall charger. Phone came on by itself and froze at stick together screen and NO orange LED. I left it like that and watched a movie. Then took the battery out of the dead hd2 and put it back in mine. Now says 66%...gotta say it's charging.
mr1ncred1ble said:
It's charging alright. Took the battery out of the dead hd2 and put it in mine. It was pretty low 3% or something. Took it out put it back in the dead hd2, plugged it into wall charger. Phone came on by itself and froze at stick together screen and NO orange LED. I left it like that and watched a movie. Then took the battery out of the dead hd2 and put it back in mine. Now says 66%...gotta say it's charging.
Click to expand...
Click to collapse
oo nice, good confirmation for charing. i figure no orange LED its crashed
mr1ncred1ble said:
well right now my bootloader says:
PB81120 MFG SS-B3
SPL-2.00.1000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
but that's because I just tried this:
http://forum.xda-developers.com/showthread.php?t=668347
so gonna bring it back to current factory ROM in just a min and then see. I can flash whatever ROM, SPL, or HSPL I want just wont get past boot screen regardless. I can even task 29 with HSPL3. Not sure what else? maybe the order of steps I'm taking.
Edit: well I could flash back and forth tried using HSPL3 with 2.00 support and get critical error so prolly dead for sure now...glad it aint mine RIP HD2, still happily take any suggestions on getting it running again tho...and thanks again for the help...maybe a goldcard? but i'm not quite sure how that works...
Click to expand...
Click to collapse
I'm sorry bud, but you have yourself and MFG SPL. I started a thread a while ago HERE, and I believe they've found a solution (post 2)
candyman123 said:
oo nice, good confirmation for charing. i figure no orange LED its crashed
Click to expand...
Click to collapse
you may be right tho. Although it's charging, no LED may mean hardware failure of some sort.
Scabes24 said:
I'm sorry bud, but you have yourself and MFG SPL. I started a thread a while ago HERE, and I believe they've found a solution (post 2)
Click to expand...
Click to collapse
i was able to get my SPL back to 2.10 here's how i did it:
http://forum.xda-developers.com/showpost.php?p=9451339&postcount=157
but still stuck, won't boot
I wonder if a manual MTTY Task29 would be any different? Would it be more thorough?
Along the lines of a SMALL ROM maybe flashing due to higher memory space corrupted, you might try my SUPER Ultra Lite ROM and see if that boots. (45MB Small)
http://www.mediafire.com/?aebnj8erjj4wpva
Hello, i have serious problem,
I was running Android GINGER... and after one restart i god 1234.... FAILED bla bla
After that i went to MAGLDR and tryed to reflash another rom but no succes
MAGLDR froze!!!!
I did TASK 29 on it and it removed everything, after this i am UNABLE to install MAGLDR 133 or any other on my HD2. its a 576MB from UK, using it in CROATIA.
HAD T-mob WIN 6.5, Android 2.1, and above mentioned 2.3.3 ver.
ANY IDEA HOW TO INSTALL MAGLDR AGAIN???
HSPL is COTULLA 2.08 HSPL
Did i bricked it? can i undo?
p.s. i did hardreset, didnt work.
CAN I TRY RETURN SPL and how to return to stock so i can try WMO6.5 again?
HELP i am desperate! help, payed alot for this phone, i am broke now without phone!
calm down man we've all been there at some point,
ok if you wanna go back to stock go to the htc site and download a official rom,
does your phone turn on?
can you get in bootloader?
if you can does it say spl or hspl ??
ops
i am sure you havent been there.
I GOT HSPL 2.08 by beppe and Cotula
I,ve tryed official rom, it starts counting, but at approx 10% it stops and bar goes red, and triangle with exclamation point appears next to it.
I OFF:... F**** it UP. i am so screwd!
-phone does turn on, and goes to white screen, saying htc and nothing
-i can go to 4colour bootscreen, sayes SERIAL and USB after i connect
ty for trying to help me
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Demon_man said:
white screen hhmm Radio - do you happen to know what radio you have flashed, if not go here http://forum.xda-developers.com/showthread.php?t=611787 chose say 2.15.50.14 down load it, i dont have micro usb on my phone no more so you have to options put phone in bootloader wait for it to turn to usb and run the ruu for the radio, or extract it find the .nbh file and rename it to LEOIMG.nbh pop it in the phone keep holding volume down till u get a grey screen and follow the instructions to flash the radio, and then try again,
you said you had android before? did you use cwm or clk so you can recover??
oh and by the way i nearly bricked my hd2 on release day so i no how u feel lol
EDIT = you can try and flash the stock rom and start again, by using 7zip to extract the official rom, find the .nbh file, rename it to LEOIMG.nbh also pop it on a micro sd card smaller than 8gig (just to be safe) boot into bootloader and follow through that way.
Click to expand...
Click to collapse
i sayed i had android on cwm, i tryed recover but magldr crashed, and since then i have problem loading MAGLDR.
RADIO FAILED TO UPDATE, i tryed that version that you sayed but it goes to 100% then shows again that triangle with !inside. F***** i am loseing my mind!
Your way of upgrading rom wont work, gray screen shows for a glich of a second and dissapears to 4colour bootscreen.
I wish i died! i ****ed all up.
BTW i bought a phone in uk and on the back of battery sayes only serial numbers in this order:
S/N99HJY005-2
35412003-754967-0
no imei, no nothing else if helps.
i am dead, payed 500$ for it last year for this amazeing phone and now i ruined everything.
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Demon_man said:
ok im with you on what you have and havent done, to me it sounds like a hardware problem if it wont flash, do you have another micro sd car you could use to try and go back to stock??
did you format the sd card first ?
Click to expand...
Click to collapse
I get it , how to do GRAY FLASHING THING, but i got RADIO EROOR
SAYES:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA Fail
Update Terminate
UPDATE FAIL
this happends when the bar gets to the 100%
do you have access to another pc mate with a different operating system from yours??
are you connecting phone via usb to the front or back of the pc?
have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Take out the battery and keep the phone off in a very cool air conditioned room for a couple hours (maybe even the refrigerator).
Put the battery back in and flash stock again.
edit: hmm. Just read that other thread, yeah you may need to jtag it...but I'd still try the fridge thing.
Edit2: worked for this guy:
nschoot said:
Sorry, for not replying before...
I put my phone in a ziplock plastic back and left it in the fridge for a few hours (I think about 8 hours or so). Then I booted it and tried to install the LEOIMG.nbh file from SD card... I kept it in the fridge while installing the image.
And somehow, it just worked first time!!
The image (from the first post of this thread) is a US demo version of Windows mobile, but I was able to install the regular ROM from the HTC site after this - without the need to keep it in the fridge.
Click to expand...
Click to collapse
demon_man said:
do you have access to another pc mate with a different operating system from yours??
Are you connecting phone via usb to the front or back of the pc?
Have a read through this thread im reading alos
http://forum.xda-developers.com/showthread.php?t=618084
Click to expand...
Click to collapse
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
davor.klobucaric said:
ok what i did dunno, but this is whats happened
downgraded to spl 1.42 or something,
started official ruu winmo 6.5 got an error, cellphone shut down and now it wont even turn on.
Ty for all the help, realy realy realy thank you !!!!
I am off to bed, tomorow i will throw my hd2 to trash can!
Click to expand...
Click to collapse
Which stock ROM did you flash?
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Demon_man said:
either you have a bad flash and its gone tits up or its bricked, either way someone will be here tomorrow when u return
Click to expand...
Click to collapse
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
davor.klobucaric said:
STOCK ROM:
RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
IT WAS WORKING BEFORE!!!
i left batery out for a couple of minutes,and now it goes to 4 colour bootscreen,
BUT! I have another problem, 1,42.0000 works, but its SPL, and if i try to go HSPL 2.08 PROGRAM CRASHES on my comp.
This is so fu**** up. I would rather send to someone who knows how to repair this. anyone interested?
Lost my will to live with this phone. i am suicidal! (joke, don't call social services)
Click to expand...
Click to collapse
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
your phone turned off??? is your battery dead??
orangekid said:
That is the correct ROM.
you need to flash it via SD instead of RUU, that way it will put the correct SPL on your phone without you having to do anything from you computer.
edit: to clarify, flashing via RUU it cannot replace your SPL version, but if you extract that file, then move the NBH to the root of your SD card, then rename it LEOIMG.NBH, then go into bootloader, it will recognize it and ask you to flash. hit power to flash and it will restore to stock SPL, Radio, ROM, Boot Logo, etc.. you're good to go.
Click to expand...
Click to collapse
I have tryed that, thank you for your response, it went well, spl went to rom fitting, BUT,
WHITE HTC sigh on turn on, 3 RED LINES ON THE BOTTOM showing radio, and other stuff, but it constantly restarts, it wont load win 6.5. anyonne know why?
Problem with clk/magldr
was trying to flash my htc hd2 EUROP with hd2 toolkit v 4.2.0.1 i follow this steps
1-i power off my phone
2-I press in vol down button and power button in same time phone now was in 3 color mode
3- i press in task 29 on hd2 toolkit this erase my phone completely
4-then i press vol down button and power button in same time again
5- i click in clk repartition and choose 200MB
6- what happen is after all this steps my phone start with htc image blocked in white and green and i cannot boot in fast speed mode like usually.
obs, im using spl-2.0.8 HSPL by cotulla.
does anyone knows how to enter in fast speed boot mode without clk or magldr cause ive tried with these they dont work,..i just only can run wm6.5 that is .....i need help please
You are sure, you have installed a recommended radio rom?
You should use the radio rom 2.15.50.14.
Send from my Leo using Tapatalk
Hi, I am having a problem where my phone is stuck in a rebooting cycle. When I power it up I get the T-Mobile screen (btw is there a way to get rid of that?) and then the 1,2,3,4... screen. Then the screen goes blank and reboots and the same thing happens again and again...
I had flashed it to WM7 so I was thinking that might be the problem. I wanted to load the stock ROM anyways but I'm not sure how I can do that now with the problem I having.
I tried powering it up while holding the volume down button. I get to the red, blue, green screen but my XP system doesn't detect the phone. Activesync doesn't recognize it either.
When reading how to flash it back to stock ROM, I remember one site said that it doesn't matter if it doesn't sync the utility would still be able to flash it back to stock. I want to make sure though so I don't brick the phone.
Any help would be appreciated.
yes it should still work. theres only been one computer ive used to flash (android or wp7) that recognized my leo and it has been successful. SOMETIMES ive gotten an error about halfway through the process but i just restarted and it went off beautifully.
flashing back stock rom ive never had ANY problems PERIOD and phone was never detected. good luck
vik123 said:
Hi, I am having a problem where my phone is stuck in a rebooting cycle. When I power it up I get the T-Mobile screen (btw is there a way to get rid of that?)
Click to expand...
Click to collapse
yes, look up changing the splashscreen. you flash them just like flashing winmo roms and radios.
and then the 1,2,3,4... screen. Then the screen goes blank and reboots and the same thing happens again and again...
Click to expand...
Click to collapse
this type of bootloop, so early into teh boot sequence, (especially if the phone is stable when in bootloader) is very often a bent/broken/not connecting battery connector.
I had flashed it to WM7 so I was thinking that might be the problem. I wanted to load the stock ROM anyways but I'm not sure how I can do that now with the problem I having.
I tried powering it up while holding the volume down button. I get to the red, blue, green screen but my XP system doesn't detect the phone. Activesync doesn't recognize it either.
Click to expand...
Click to collapse
activesync never does in bootloader. the instructions to get an activesync connection' doesnt mean activesync teh program, it means 'get a usb connection to your computer', , if it says usb in the white area of bootloader you are good to go.
When reading how to flash it back to stock ROM, I remember one site said that it doesn't matter if it doesn't sync the utility would still be able to flash it back to stock. I want to make sure though so I don't brick the phone.
Click to expand...
Click to collapse
correct
Any help would be appreciated.
Click to expand...
Click to collapse
you're welcome
Thanks for all of the advice. I was unable to get it to flash properly. I started the process and a progress bar showed up on the phone but then at 1% I got an error on the PC saying that a connection cannot be established with the phone.
I then tried the SD card method (copying RUU_signed.nbh to an SD card after renaming it to leoimg.nbh), but it seems to have made it worse. I started up the phone in bootloader with this file on the sd card and it started the flashing process. A couple of minutes later it stopped with this showing up on the screen:
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
RCUST -
BOOTLOADER -
SPLASH1 -
OS -
CONFIGDATA -
Update Terminate
UPDATE FAIL
Click to expand...
Click to collapse
Now when I power up the phone I get this message:
<image of an exclamation inside a triangle>
Software update failed!
Please try again.
Click to expand...
Click to collapse
And if I start up in bootloader I get this:
______________________RUUNBH
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
______________0x05
CotullaHSPL____0x40
Upgrade ROM code error
Please try again
Click to expand...
Click to collapse
Please help. I don't know what to do. This is getting very frustrating.
I also experienced the reboot loop,
I used another SD card and that solved it.
only problem is, now I have a fukked up microSD card, and I have not found a device that is able to format it.
When my phone goes into a boot loop (i.e., powers up, shows boot screen, gets past MAGDLR, goes to the loading screen, then reboots), I only need to connect it to a wall-plug to charge it and voila, it starts for me.
I have no idea why this is the case, it is very random if and when it goes into a boot loop. But I've heard that most reboots are related to the SD cards.
One solution you can try is to fill up the SD-card. Fill it up to say 30 ~ 40 % full of stuff? Apparently, this will give you some luck in filling up the sectors of the card that aren't "sufficiently" fast enough for WP7 that might be causing the reboot. I did that for mine and it drastically cut down on the rate of how often it rebooted. Now it's once every few days whereas it used to be a few reboots in a single day.
Sorry to bump this old thread but things came up and I didn't get a chance to try to resolve this and I sort of forgot about it.
I now have been trying to fix it again using some of the suggestions here but the phone is acting funny. When I first tried to power it up nothing happened. I figured because it had been sitting so long, so I plugged it in to the charger. As soon as I did the phone powered up without me pressing anything. Then the red, green, blue, and white screen that looked like this:
______________________RUUNBH
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
______________0x05
CotullaHSPL____0x40
Click to expand...
Click to collapse
popped up on the screen and then it immediately went to a gray screen that said "loading...." It was stuck on this so I removed the battery. When I inserted the battery back in and powered it up the camera flash went off and it vibrated continuously. The same thing happened a second time when I tried. I thought I would let the battery charge overnight, so I plugged it into the charger. The charging light never came on but I thought I would see anyways.
When I checked on it in the morning, the screen was lit up gray but there was nothing else. I took out the battery, popped it back in but the phone wouldn't turn on. I took out the battery and let it sit for about 15 mins. I put it back in but it wouldn't power up if I pressed the power button. I held the volume down button and pressed the power button and the same thing happened with the red, green, blue, and white RUUNBH screen coming up and then it immediately goes to "loading..."
I took out the battery to power it down and tried again, but nothing happened. Again, I took out the battery and let it sit for 15 mins. but this time I also removed SD card. Now when I hold Volume down and press power and the RUUNBH screen comes up:
______________________RUUNBH
PB81120 HX-B3
SPL-2.08.HSPL 8G XE
______________0x05
CotullaHSPL____0x40
Upgrade ROM code error
Please try again
Serial
Click to expand...
Click to collapse
I then plugged it into the computer through USB and the "Serial" on the screen changed to "USB" and in device manager it shows up as Qualcomm CDMA Technologies MSM.
I want to try getting it back to stock but because of the things mentioned above, I am afraid of screwing it up even more beyond repair. I am a novice so terms like HSPL and radio is a bit confusing to me. Thanks in advance.
Bump. I went on the HTC website to see if I could find the appropriate ROM. I entered my IMEI number and it directed me to download Version 2.13.531.1
It seems like this is a different version than what is showing up on my phone right now.
I'm not sure how I should proceed and doing a search I find differing advice. Any help would be appreciated.
you have HSPL 2.08 already on device...
use HSPL flasher to get back if you want to original SPL...
http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
if you want try flash WP7 read tutorial from my signature
dxdy said:
you have HSPL 2.08 already on device...
use HSPL flasher to get back if you want to original SPL...
http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
if you want try flash WP7 read tutorial from my signature
Click to expand...
Click to collapse
Thanks dxdy. I edited my post; I'm not sure if that changes anything. I ideally I would like to eventually use this phone with WP7 but I thought I would need to get back to stock W6.5. Can I follow the WP7 tutorial even given the state my phone is in?
if you want back to stock wm6.5 only need to flash stock ROM...
maybe you can try the mtty to erase it