update terminate UPDATE FAIL- Now what? - G1 General

I was trying just to downgrade from CRC1 to RC29. When I booted the phone with the "camera+power" function and started the update (per this thread per this thread ) and it said "update terminate UPDATE FAIL" now I cant boot into my phone. Is there a way to fix this?

I've tried redownloading the file from 4 different sources now and continue to get the error. Any help would be great

Did you check the md5sum to make sure it was a complete download?

im not sure what you mean by that. I used winmd5sum and got that they were different. What should it say?

unolax said:
im not sure what you mean by that
Click to expand...
Click to collapse
http://en.wikipedia.org/wiki/Md5sum
A little initiative, PLEASE.

Okay the one I got says that its the same. Now when it boots up stuck in the rainbow screen and says there is no img file. Anything else i can try or should i just take it to tmobile and tell them it stopped during update?

Related

flashrec recovery-backup.img?

does anyone have their recovery-backup.img . I want to try reverting back to the original bootloader the update the new MR and install aman ra recovery again. If this works, this will save a lot of people alot of time. This way they wont have to flash the RUU back to the phone.
Please and thankyou
I would like this too.
it seems that no one would have this.. i bet not alot of people use the flashrec method..
Glad I am a maniac about backing things up.
I tired this already, the update fails halfway through it. the phone reboots and tells you to call customer service with a error code.
http://rapidshare.com/files/308999685/recovery-backup.img.html
oh god, thank you alot friend
You are the man. Thank you.
So I did:
flash_image recovery recovery-backup.img
Now when I try to boot to recovery I get a little yellow warning triangle with a phone laying next to it.
that is supposed to happen, now you can install the sprint update, then reflash the recovery image
that is supposed to happen, now you can install the sprint update, then reflash the custom recovery image
Byggun said:
Glad I am a maniac about backing things up.
I tired this already, the update fails halfway through it. the phone reboots and tells you to call customer service with a error code.
http://rapidshare.com/files/308999685/recovery-backup.img.html
Click to expand...
Click to collapse
Anyone have a copy of this file? I'm getting the "download limit reached" error from Rapidshare.
Did anyone get this MR upgrade method to work? I'm running a stock rooted ROM, but I have the nandroid recovery image installed which is keeping the MR install from working.
cmccracken said:
Anyone have a copy of this file? I'm getting the "download limit reached" error from Rapidshare.
.
Click to expand...
Click to collapse
Thanks for posting this Byggun but I am getting the Rapidshare error as well.
Here you go:
http://www.gigasize.com/get.php?d=bg4bxr8w1ob
I have it copied and saved on my computer, so if we ever need to refer back to this post for it, I will always have it.
jonnythan said:
Here you go:
http://www.gigasize.com/get.php?d=bg4bxr8w1ob
Click to expand...
Click to collapse
Thanks for re-posting. Is the file really only 147k? I want to make sure I didn't run into a download error...
jonnythan said:
Here you go:
http://www.gigasize.com/get.php?d=bg4bxr8w1ob
Click to expand...
Click to collapse
You Rock!!
EDIT: It wouldn't let me download, at least not for free.
cmccracken said:
Thanks for re-posting. Is the file really only 147k? I want to make sure I didn't run into a download error...
Click to expand...
Click to collapse
No, it's 5 MB:
Name: recovery-backup.img
Size: 5MB | Hosted on: 23 Nov 2009 | Downloaded: 2 times
jonnythan said:
No, it's 5 MB:
Name: recovery-backup.img
Size: 5MB | Hosted on: 23 Nov 2009 | Downloaded: 2 times
Click to expand...
Click to collapse
Thanks, I thought 147k sounded a little fishy. I downloaded a second time, and got the same 147k file size (no errors, just way too small). When I tried downloading from IE instead of Firefox, I started getting a "YOU HAVE REACHED YOUR FREE DOWNLOAD LIMIT" error message.
Sorry i'm wrong
edited
goku14238 said:
I have it copied and saved on my computer, so if we ever need to refer back to this post for it, I will always have it.
Click to expand...
Click to collapse
Could you please upload it again? The old links are dead. Thanks!!
antonmos said:
Could you please upload it again? The old links are dead. Thanks!!
Click to expand...
Click to collapse
Actually, found a working link in this /showthread.php?t=657086"
Clink on "Mobile Download Link"

Black Screen Vibrant

Okay, I know there is many post about this, but none seem to answer my question or help me. I have a Vibrant and I've been searching this site along with google to help fix my phone.
I brought it off a friend so warranty won't happen since T-Mobile is being asses. My phone is suck on the black screen after it passes the big S logo. It stays black, and I get 4 lights bright on the buttons. I've reflashed my phone with Odin and it has not worked. I think it correctly as well. Com3 was on, ran the stock Vibrant with Pitt and Tar with PDA one. That had only got my phone off the complete brick that my phone had gone through, when It wouldn't even turn on.
I got the brick off and now I'm stuck with this program. I did have a one click root fix and I was trying to mess around with clock work. To help answer some questions. No, I can not boot into recovery mode. Yes I have cleaned and wipe out cache. Yes I can go into Download mode, but its pointless since odin doesn't do much for me. No I can not go into the phone since the black screen is there and no I can not flash a update file for some reason.
Saying that, I would be grateful for some help and before hand I thank anyone who comes across this even if they don't help, just for taking time to read this and maybe referring someone else to help me or even pointing me in the right direction. Thanks and once again PLZZZZZZZ HELPPPPPPPPPPPPPPPP.
No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?
zephiK said:
No, odin is not "useless." I'm pretty positive that you applied Odin wrong.
- Check the MD5 on the files you downloaded; verify they are indeed identical.
- Search for development forum for "drivers"... theres a thread posted by TGA_Gunner. Find that thread and download the version respective to your OS (x86 or x64). This one is proven to work.
What exactly happened in Odin?
Click to expand...
Click to collapse
Okay. One thing I notice when I try to put my phone into the Android system recovery it says this "
-- Movi_check start .. !!
checksum confirmation need _checksum [1301305579]
MBR _Chksum in header :4.1
MBR checksum : EC0063A432AFDBA2B104C3F0DF52FE3D
MBR Checksum Error
Movinand Checksun Confirmaton Fail
-- movi_checking done!...
# MANUAL MODE #
-- Appling Muti - CSC ...
Installing Muti - CSC "
Another thing, I hit reinstall packages and It says "
-- install from sdcard...
finding update package ...
opening update package ...
E: cant open /sdcard/update.zip
(no such file or directory)
installation aborted.
the drivers I use are the samsung Vibrant drivers for windows 7 64. I know it works because the phone before didn't come up when I didn't use the driver. It always failed and when I install it, than it read my phone. When I connect the phone to the computer, the phone does read it and on odin, it says com 3 in yellow. I than Install pitt and install tar.
The tread you sent me too, I actually went through there before. Both of those drivers didn't work but I found one for windows 7 and it started working for my computer. I could tell it works because the computer actually reads the phone and so does odin. Like I use odin right because it goes through the phone and than says pass at the end. so like WTF lol. I'm pretty sure I'm doing it right tho
Another thing. I used odin a few seconds ago, got the phone to run and it went through the green bar and a blue screen now saying reset came up. My phone than went into androids recovery mode but it started to wipe out data. When doing so, the data said wipe fail. It booted up and now back to the start. Black screen, 4 panels on the bottom lit up and nothing to do.
I'm starting to think it has to do with clockwork I did a partition in it and every since than my phone has been doing this blackscreen with 4 lights.
ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work
same thing here, know idea, odin says everything passed but still the black screen and four buttons. i also noticed that the sound and tmo splash screen are not in sync. no idea ???? help would be great!!!!!!!!!!! same errors though. also from the partion feature in clockworkmod.
i assume your on windows i don't keep up if there is a working version for mac. Anyway, make sure your update.zip is just named update DO NOT add .zip yourself or the phone for what ever reason sees .zip.zip. I would also go ahead re download your odiin files just to make sure non of them are corrupted for what ever reason.
files all check out good, i can't gain access to the phones sd, i have flashed this thing with every checked build i could find, all with the same result. the master boot record is not adding up.? still have know idea.
have you tried using this.. http://forum.xda-developers.com/showthread.php?t=740558
this work for me and was able to flash to stock..
somebody please help I'm experiencing the same problem as the OP? can somebody point me in the right direction I've been looking for hours
Instead of making us read the entire thread perhaps you could summarize your specific problem.
My initial impression goes like this.
1. Get into download
2. ODIN back to STOCK 2.1
Run odin in admin mode
Use rage against the cage
After getting back to stock Recovery 2e go ahead reroot and flash away
Sent from my SGH-T959 using XDA App
Don't know if this is still an issue, but here's how I fixed it.
http://forum.androidspin.com/showth...yo-That-does-not-Brick!-Downgrading-Is-Fine-)
Downloaded this file knowing it wouldn't work, Had ODIN flash it and got into this weird recovery screen. Just pulled the battery and then flashed back to stock using ODIN.
Helped me out.
Use 512 .pit and True Stock 2.1 from this post
http://forum.xda-developers.com/showthread.php?t=747335
And quit messing with your phone! lol
This is how i fixed mine too, my phone would go through a seemingly normal start up, but the UI would never load and it would stay on a blank screen.
Flash Eugenes373s froyo that doesnt brick. once it brings you to the recovery screen, pull the battery and once again use odin to flash back to stock. the phone should boot up now.
mnm0071980 said:
ANY body ?
help would def be appreciated and even donates if possible. I just need my phone to work
Click to expand...
Click to collapse
Hey i just encountered the same exact problem four days ago except i flash with odin it says pass but im still stuck on a black screen after the s logo my problemwas encountered by tryig flash a kernal. Please tell me that u found a solution

ODIN for the I/O Galaxy Tab

Do anyone know where I can find these images?
If you get stuck, this will bring you back
http://forum.xda-developers.com/showpost.php?p=14011086&postcount=26
Here's where I got the ODIN3 from http://forum.xda-developers.com/attachment.php?attachmentid=599054&d=1305645578
Did that work for the IO Tab, the P7510? It looks like that link is for a different model number.
Its for I/O tab. I got stuck and made it with a system dump from someone else. The boot logo is for 10.1v though but everything works fine. Only use if u get stuck in a loop. I had to manually flash 3.1 from Pershoots to update.
Sent from G2x
hey i tried this image but get write failed.
any other options that need selecting?
which version of odin are you using? could you pls link it?
thx.
same prob ^
this worked!
http://www.megaupload.com/?d=DDN6BYB2
It worked fine for me, are you guys using Odin 3?
Sent from my HTC Vision using Tapatalk
SS2006 said:
this worked!
i have tried using odin3 and it goes thru process but im still looping. also adb isnt reading my device so i cant adb reboot....
Click to expand...
Click to collapse
h t t p://jake-spencer.com/2011/06/recovering-encrypted-samsung-galaxy-tab-10-1/ is the solution right here. worked for me
deeemaa said:
SS2006 said:
this worked!
i have tried using odin3 and it goes thru process but im still looping. also adb isnt reading my device so i cant adb reboot....
Click to expand...
Click to collapse
I sent mine in. Samsung Level 3 support is what you need. Make sure you registered your device first.
Click to expand...
Click to collapse
For me Odin seems to be the only option as well as adb and fastboot dont recognise the tab.
When using odin I get either "write error" at the end of process if I try to send just the .tar.md5 file listed in first post, or, if I check repartition I get "error in line 1455" so I figure the next step will be repartition with a .pit file included as well...
Question is....which .pit to use - any solid fact or informed opinions from anyone much appreciated?
I am happy to be guinea pig as my tab is already "semi-bricked" and good for nothing and Samsung in France have said no service or guarantee available here, only in the USA....WTF!!?? So, I might just as well get reckless and see what happens...
As an aside......samfirmware?? is this now a pay service before one can download any firmwares? I see they have a GT-P7510 section indicated but inaccessible because of "webprotect". I am loathe to cough up the money for their "premium service" just to be able to enter the section and maybe find that they have nothing to offer....
I am not a leecher so will happily pay if they have something to offer, but will not pay just to see if that is the case...anybody got any info on what they have available?
Ta very much
bonzai3558 said:
Its for I/O tab. I got stuck and made it with a system dump from someone else. The boot logo is for 10.1v though but everything works fine. Only use if u get stuck in a loop. I had to manually flash 3.1 from Pershoots to update.
Click to expand...
Click to collapse
Thanks! I used ODIN3 (v1.00) to flash the image and successfully "unbricked" my tab which was previously stuck in a boot loop. Was pleasantly surprised to see that user data was preserved.
The OTA finally downloaded and now I just have to wait for the battery to recharge so it can apply the update...
bonzai your odin flashable md5 was awesome, can u make another one based on 3.1 please?
it would help this community alot

Failed to update Zenfone 3 ZE552KL for Nougat 7.0

I have bootloader unlocked, I downloaded nougat 7.0 firmware and tried to update manually, everything installs normally, but at the time of calling it says that the system is corrupted.
I already tried to put the boot and recovery of the version 7.0, already tried to put of the old, but always of the same thing, only version that works is previousor, someone knows how to do?
luizflb said:
I have bootloader unlocked, I downloaded nougat 7.0 firmware and tried to update manually, everything installs normally, but at the time of calling it says that the system is corrupted.
I already tried to put the boot and recovery of the version 7.0, already tried to put of the old, but always of the same thing, only version that works is previousor, someone knows how to do?
Click to expand...
Click to collapse
Whats the link for the manual download, ill experiment with it when i can update
Sm0k3r83 said:
Whats the link for the manual download, ill experiment with it when i can update
Click to expand...
Click to collapse
i used this link: http://dlcdnet.asus.com/pub/ASUS/Ze...ser.zip?_ga=1.245707268.1656347377.1488140054
Finished the update, all went well. Was a little laggy at first, so i cleaned the cache. Then rooted. Everything seems to be fine for me
same issue here. I can't update both with trwp and stock recovery. Originally my zenfone 3 was TIM SKU. Should be that the reason?
Hai.... someone could help me, I need recovery.image for asus ze520kl
zulfikarbugis said:
Hai.... someone could help me, I need recovery.image for asus ze520kl
Click to expand...
Click to collapse
mega.nz/#F!ok0V0RIA!5WKtHe98opzjVI3NPbM7Ww
Nobody knows a solution? I have tried to change the reocvery and the boot to the nougat version, and install the firmware manually, everything installs normally without errors, but when it connects it appears the following message "your device software can not be checked for corruption, Please lock the bootloader".
The cell phone is just that and I have to go back to the previous version!
I already took root, xposed and everything, and it always gives the same thing!
luizflb said:
Nobody knows a solution? I have tried to change the reocvery and the boot to the nougat version, and install the firmware manually, everything installs normally without errors, but when it connects it appears the following message "your device software can not be checked for corruption, Please lock the bootloader".
The cell phone is just that and I have to go back to the previous version!
I already took root, xposed and everything, and it always gives the same thing!
Click to expand...
Click to collapse
Same issue here =(
luizflb said:
Nobody knows a solution? I have tried to change the reocvery and the boot to the nougat version, and install the firmware manually, everything installs normally without errors, but when it connects it appears the following message "your device software can not be checked for corruption, Please lock the bootloader".
The cell phone is just that and I have to go back to the previous version!
I already took root, xposed and everything, and it always gives the same thing!
Click to expand...
Click to collapse
Updating thru TWRP results in an Error 7.
mxdxl said:
Updating thru TWRP results in an Error 7.
Click to expand...
Click to collapse
You did not understand, I installed the original recovery, both the last version of 6.0 and the version of 7.0, all install the update without error, but when it goes online does not work and I have to go back to the previous version
Raw firmware
I have the same issue. My phone was branded "tim italy". When i bought it, I flashed the WW version via asus flash tool, and I'm currently able to update till the last M version, which is the ......152.
If i try to update to Android N, my phone will not boot, giving me the corruption message and shutting down after 10 seconds. I also tried to perform the dm restore procedure; the dm error disappeared but the system is stuck on the Asus boot screen
I believe that the only solution is to flash a Nougat RAW firmware via asus Flash tool. Does Anyone have a download link for the N version ?
I have the same problem .. is there who can help?
`same problem can't update to nougat but my error is signature verification
hope someone can help us both
---------- Post added at 11:00 AM ---------- Previous post was at 10:48 AM ----------
Sm0k3r83 said:
Finished the update, all went well. Was a little laggy at first, so i cleaned the cache. Then rooted. Everything seems to be fine for me
Click to expand...
Click to collapse
Did you unlocked before updating?
same problem here....i downloaded the update and put it in internal storage...it automatically detected system update but when i try to update it it failed during installation....anyone help pls
mxdxl said:
Updating thru TWRP results in an Error 7.
Click to expand...
Click to collapse
if you want to update with twrp you must modify the update-script file placed in
UL-ASUS_Z012D-WW-14.2015.1701.8-user/META-INF/com/google/android
i have uploaded my one, if you can't modify the file you can download it and replace it in zip file
ExperienceTesla said:
if you want to update with twrp you must modify the update-script file placed in
UL-ASUS_Z012D-WW-14.2015.1701.8-user/META-INF/com/google/android
i have uploaded my one, if you can't modify the file you can download it and replace it in zip file
Click to expand...
Click to collapse
This works well? I have unlocked the bootloader and root my device. if this works for it?
zulfikarbugis said:
This works well? I have unlocked the bootloader and root my device. if this works for it?
Click to expand...
Click to collapse
The solution to the picture is Flash through the course
JadeKubPom said:
The solution to the picture is Flash through the course
Click to expand...
Click to collapse
I've done this but still fails. My phone will not boot, giving me the corruption message and shutting down after 10 seconds.
zulfikarbugis said:
I've done this but still fails. My phone will not boot, giving me the corruption message and shutting down after 10 seconds.
Click to expand...
Click to collapse
mine does the same even with the right update-script.
When i try to update using stock recovery i get failed signature message

Nokia 6 T-1000 official rom desperately needed

Hi, I bought a Nokia 6 T-1000 and it wound up having an unofficial rom installed. I am desperately trying to get the official firmware installed and I can't find it. Sadly, now my brand new phone just boots straight into recovery mode. Can anyone backup their firmware and provide it to me or point me to where I could get it?
aNorthernSoul said:
Hi, I bought a Nokia 6 T-1000 and it wound up having an unofficial rom installed. I am desperately trying to get the official firmware installed and I can't find it. Sadly, now my brand new phone just boots straight into recovery mode. Can anyone backup their firmware and provide it to me or point me to where I could get it?
Click to expand...
Click to collapse
Try download the file from below. Follow the steps.
http://www.stechguide.com/install-android-7-1-1-nougat-on-nokia-6/
kanakarkku said:
Try download the file from below. Follow the steps.
Click to expand...
Click to collapse
I had tried that. I can only do method 1 though as it won't go out of recovery mode to turn on USB debugging. When doing method 1, it attempts installing, I see it installing three times with a couple reboots then returns to recovery mode and says the following:
Failed to parse build number in post-build-incremental=00CN_3_170
Failed to parse build number in pre-build-incremental=00CN_1_310
E1004: System partition fails to recover
E:Error in <downloaded filename>
(Status 7)
Installation aborted.
aNorthernSoul said:
I had tried that. I can only do method 1 though as it won't go out of recovery mode to turn on USB debugging. When doing method 1, it attempts installing, I see it installing three times with a couple reboots then returns to recovery mode and says the following:
Failed to parse build number in post-build-incremental=00CN_3_170
Failed to parse build number in pre-build-incremental=00CN_1_310
E1004: System partition fails to recover
E:Error in <downloaded filename>
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
It seems it's not the right file. When I check the built number it is 00CN_3_31A_SP. It would be good to know what built be you have as it is failing to increment the 170 .. I will check later what I can do
kanakarkku said:
It seems it's not the right file. When I check the built number it is 00CN_3_31A_SP. It would be good to know what built be you have as it is failing to increment the 170 .. I will check later what I can do
Click to expand...
Click to collapse
Thanks! Before the update, it was saying "00CN_3_170" under Build Number in Settings. I had spoke to Nokia though and they felt that the firmware had been tampered with.
nokia stuck in recovery mode
aNorthernSoul said:
Hi, I bought a Nokia 6 T-1000 and it wound up having an unofficial rom installed. I am desperately trying to get the official firmware installed and I can't find it. Sadly, now my brand new phone just boots straight into recovery mode. Can anyone backup their firmware and provide it to me or point me to where I could get it?
Click to expand...
Click to collapse
aNorthernSoul said:
Thanks! Before the update, it was saying "00CN_3_170" under Build Number in Settings. I had spoke to Nokia though and they felt that the firmware had been tampered with.
Click to expand...
Click to collapse
kindly tell me what to do my new nokia 6 is also stuck on recovery mode plz help me what to do
kafeel3186 said:
kindly tell me what to do my new nokia 6 is also stuck on recovery mode plz help me what to do
Click to expand...
Click to collapse
I am still trying to figure it out. Based on where you live, you might be able to contact Nokia via online chat and they could direct you to a service centre to flash the phone. They don't have any in Canada though.
I am trying to get the legit firmware but I am not sure if it is the one I have or the modified one my phone came with causing me to be able to unsuccessfully install it.
How did yours wind up in that state?
kanakarkku said:
It seems it's not the right file. When I check the built number it is 00CN_3_31A_SP. It would be good to know what built be you have as it is failing to increment the 170 .. I will check later what I can do
Click to expand...
Click to collapse
Just a side note, I am able to sideload the update via the PC. It quits at 54% (failed to read command * no error) after showing those same parse errors on the screen though. Weirdly, then it reboots with a differently styled logo screen and tried (and fails) to update. Then the logo screen is normal again.
Just in case anyone is wondering, I spoke to the seller I purchased from on Amazon. Whether advertised or not, most China suppliers are installing a custom ROM on all China variants of the Nokia 6. When buying from a more local third party, you have no access to this ROM. I just bought this phone last week and knew about the update from Nokia so had confirmed with them that it currently didn't support Google Services. I didn't want a custom rom.
I have asked for either the rom installed or the official firmware that should have came with the phone and a means to install it or I will take action with Amazon tomorrow. I don't really want to return the phone, I'd likely wait for someone to release an official rom but I could barely afford this phone as it was and it is currently useless.
I just wanted to warn anyone else thinking about buying the Chinese model.
kanakarkku said:
It seems it's not the right file. When I check the built number it is 00CN_3_31A_SP. It would be good to know what built be you have as it is failing to increment the 170 .. I will check later what I can do
Click to expand...
Click to collapse
aNorthernSoul said:
I had tried that. I can only do method 1 though as it won't go out of recovery mode to turn on USB debugging. When doing method 1, it attempts installing, I see it installing three times with a couple reboots then returns to recovery mode and says the following:
Failed to parse build number in post-build-incremental=00CN_3_170
Failed to parse build number in pre-build-incremental=00CN_1_310
E1004: System partition fails to recover
E:Error in <downloaded filename>
(Status 7)
Installation aborted.
Click to expand...
Click to collapse
I had the same result after method 1 via sd
Quixote78 said:
I had the same result after method 1 via sd
Click to expand...
Click to collapse
And after method 2 via ADB)))
As result device stuck in bootloop mode.
I've managed to bring it back with MiFlash only.
kanakarkku said:
Try download the file from below. Follow the steps.
http://www.stechguide.com/install-android-7-1-1-nougat-on-nokia-6/
Click to expand...
Click to collapse
IMO the file that you download is to update the existing working ROM and the op has somehow ended up with one that doesn't work. So I think he would need the entire ROM the exact version that he last had to get back into the phone and then update.

Categories

Resources