i did read the instruction. but still dont really get it. :X
Q1.
reformating the memory card to FAT(default) or FAT-16 or FAT-32?
Q2.
I already try pressing volup+ok(button on right side) and den reset but it just restart my phone. there no SD loader mode ?
any kind souls wanna help a newbie here. dont wish to brick my phone ):
PS: i using a Micro-SD 2gb from kingston.
A1. FAT(Default)
A2. Turn OFF your phone (via power, or just take out the battery and put it back in). Then while holding the [vol up] and [right side OK] press the [power button on top]
thanks. flashed to montecristo 6.5 rom alr.
thanks again for helping a newbie out!
Related
I need help,recently i upgrade my jas jam with (CRC_r14.1-naked.bs)it was good,but after few days,when i switch on my phone,the screen strucks and the display is showing (windows mobile 6.1)and nothing but when yesterday i switch on it again,it displays good,but when i click on windows icon,the list is vanished only it shows(today,recent programs)and nothing is working in windows,and then i connect to active sync and wants to upgarde again with (CRC_r14.1-naked.bs)and i follow all the steps but atlast activesync showing no device is connected,after that i repeat the same thing,but it is showing like that only, wat can i do,iam in trouble can any body tell me how to go through this, i will be very very thankful to u.
Do a hard reset (hold context buttons and hit the reset button with stylus). Or you can go to bootloader (bold power + side OK and hit reset button with stylus) and now you will be able to flash via RUUWrapper.
imate
pajousek said:
Do a hard reset (hold context buttons and hit the reset button with stylus). Or you can go to bootloader (bold power + side OK and hit reset button with stylus) and now you will be able to flash via RUUWrapper.
Click to expand...
Click to collapse
hi,yes i've done like that only (hold the ok button and hit the stylus on rest but still it is giving crcs rom loading )second one (hold power+side ok)then its giving the hermes display with four color bands,what can i do,plz tell me.
ttsadaf said:
hi,yes i've done like that only (hold the ok button and hit the stylus on rest but still it is giving crcs rom loading )second one (hold power+side ok)then its giving the hermes display with four color bands,what can i do,plz tell me.
Click to expand...
Click to collapse
Where you have the colour bands, you can flash from PC without connecting to activesync. At least that works for me.
And try also context buttons on the HW keyboard.
You have to hold BOT soft keys and reset with stylus. Holding down the ok button and resetting does nothing but a soft reset. You want to hard reset.
You will still get CRC's rom loading up as that is the loaded OS.
If you wish to upgrade then, if you have Hard SPL (SPL: 2.10 oli), then you can use the sd card method fromn the bootloader (tri-colour) screen.
SD Card method
1. Format SD card fat32 (2Gb or less ONLY) then copy the .nbh file to it. Rename .nbh file to "hermimg.nbh".
2. Insert into Hermes and go to bootloader.
3. If sd card is formatted fat32 and flash file is renamed properly, follow the prompts.
Cheers...
i have HP ipaq 6815 and i.ve try to upgrade my ROM...but my SD card was not empty and ask to format the card.i shut down the phone and take off the batery for a while and now wont started...i've try with a diferent SD card not working...please can anyone tell me how to fix this problem...
anyone.....pleaseeeeeeeeeeeee can help me...........
what should i say...no one can help me becouse i'm new here????come on anything will be a help...just to start up windows
this is how i fix my problem...
First:
Remove the mini sd card
Remove battery
wait 5 minute minimum
press and hold Soft Keys and Sof Reset
Insert battery, release Soft Reset
release Soft Keys
Device is switch on and entering in Boot Loader.
i cant say thx becouse no one help me...i hope this will help for those who has the same problem...so...i'm happy to help
pljs said:
this is how i fix my problem...
First:
Remove the mini sd card
Remove battery
wait 5 minute minimum
press and hold Soft Keys and Sof Reset
Insert battery, release Soft Reset
release Soft Keys
Device is switch on and entering in Boot Loader.
i cant say thx becouse no one help me...i hope this will help for those who has the same problem...so...i'm happy to help
Click to expand...
Click to collapse
hey i need ur help... i was upgrade with new rom.. after it complete i cant power on my phone... its not come to bootloader... only blinkingcharge light... dispay is full black after pressing power button.. not power on...
dulands said:
hey i need ur help... i was upgrade with new rom.. after it complete i cant power on my phone... its not come to bootloader... only blinkingcharge light... dispay is full black after pressing power button.. not power on...
Click to expand...
Click to collapse
yuo must Hard reset the device after that reFlash with official ROM for your device
dulands said:
hey i need ur help... i was upgrade with new rom.. after it complete i cant power on my phone... its not come to bootloader... only blinkingcharge light... dispay is full black after pressing power button.. not power on...
Click to expand...
Click to collapse
what type your device...?
Ive just installed V10.2 ROM and im stuck on the Sony Ercisson Screen...what now?
Hard reset?
How? Thats not the little reset button on the back i guess?
OK, found procedure for hard reset. BRB...
You can always do a reflash with microsd method so don't worry
x1fan said:
Ive just installed V10.2 ROM and im stuck on the Sony Ercisson Screen...what now?
Click to expand...
Click to collapse
Have you hardSPL'd your phone before?
If not you will have to flash a generic rom via microSD method (or put your phone into boot loader mode and connect via usb) and then hard spl your phone.
If you have already hardSPL'd your phone, reflash the rom using microSD method.
EDIT: from http://whirlpool.net.au/wiki/?tag=xperia_guide_roms
Recovering from a bad flash
If you have forgotten to hardspl your x1 before flashing a rom or are getting an error when attempting to flash a rom (260-262) and can not get your x1 to boot then this might help:
1. Take the MicroSD card out of your phone and put it in to a MicroSD to SD card converter and insert it to your card reader.
2. Format the MicroSD card in to FAT32 format.
3. Download this ROM
4. Extract the .ZIP file and rename the .NBH file to 'kovsimg.nbh'
4. Copy this file to the freshly formatted MicroSD card (VISTA OR XP THIS DOESNT MATTER FOR THIS)
5. Take the memory card out of your PC/Laptop and place it back in to your Xperia
6. Remove the battery and replace it after 5 seconds. (dont replace the back cover)
7. The press the Volume Down key located on the right hand side of the phone and the power key keep them both pressed and then with the stylus press and hold down the reset button for three seconds.
8. You will then be presented with a Tri-Colour screen to begin with then the bootloader will load the kovsimg.nbh file.
9. Once loaded follow the on-screen instructions and your done, be patient the process does take a while about 10mins in total, BUT DO ENSURE YOU HAVE YOUR PHONE ON CHARGE, you dont want the power to die on you half way through, it would just be a waste of time.
N.B. HARD-SPL WILL ONLY LOAD ONCE YOU HAVE A WORKING IMAGE ON THE PHONE!!!! FROM THE SPL 0.72.0000 version.
awww man, x1fan, YOU'RE the one who "broke" it?!
let me know of the instructions above helped you out...
Cheers for all your help with this guys, all it needed in the end was a hard reset and some time to warm up i think, all is good as gold now..apart from the fact that it goes to xpanel screen prior to loading the home screen but the procedure above worked a treat so thank you all....YET AGAIN lol
hi, i am in need of som serios help, im a total noob n i flashed my first ROM with Duttys_Leo_Sense_2.5_5.21905.5.0.93_2.13_Radio_2.10.50.26_HG_V3.4.exe
i then last night decided i wanted to switch over to Miri_Steve0007_Elegancia_V8.5
and now the phone will not reset and has a million crashes! iv been trying to go back to the Dutty ROM bt it dosnt let me. can som1 upload what it is that i need to get the dutty rom bak. thank u in advance
when you say crashing, can you give a bit more info? is it locking on a cirtain screen? or in a constant reboot?
you may want to also read through a few of the stickys as if you use the search you most likley will find the cause.
RE: HELP!
More info would be appreciated but I've had issues before and did this:
Performing a factory reset using phone buttons
If you cannot turn on your phone or access the phone settings, you can still perform a factory reset by using buttons on the phone.
With your phone powered off, press and hold the VOLUME UP and VOLUME DOWN buttons.
While holding the volume buttons, press the END/POWER button briefly and then release it.
When you see a warning message on screen, release the VOLUME UP and VOLUME DOWN buttons.
Press the VOLUME UP button to perform the reset, or press any other button to cancel the reset.
From that my phone turned on and I was able to create an activesync connection again to flash another ROM.
__________________
Blog: jonathanstowell.com
Rasheduddin said:
hi, i am in need of som serios help, im a total noob n i flashed my first ROM with Duttys_Leo_Sense_2.5_5.21905.5.0.93_2.13_Radio_2.10.50.26_HG_V3.4.exe
i then last night decided i wanted to switch over to Miri_Steve0007_Elegancia_V8.5
and now the phone will not reset and has a million crashes! iv been trying to go back to the Dutty ROM bt it dosnt let me. can som1 upload what it is that i need to get the dutty rom bak. thank u in advance
Click to expand...
Click to collapse
I flashed many roms and never experience like that as long as you do it as per instruction/ guide in the relevant ROM.
I would suggest you to go into bootloader screen (turn of you phone, then press vol up and down together with the power on button).
Install HSPL (only if you havent installed it), perform task 29, flash the radio (check the radio version required by the ROM), and flash the ROM you want.
Everytime the process reach 100%, you press the vol down button to go into bootloader screen so you dont need to pull out the battery or the cable (but for the last process (flashing the rom), you should press vol down and up together (it will go to hard reset). And for better result, please make sure your battery above 50% and use win xp.
Hope you can solve it.
I upgrade my Jade with megade 1.7.6. When was flashing finnish I did hard restart Jade and booting to win 6.5. All run. I install few application from sdcard on Jade and restart. Phone not booting. Only viewing smart mobility message and restart. This rules cycling. I did hardrestart now. Jade cycling. Pls help me with this anomaly, pls. I like this smartphone.
Can you lunch the Bootloader?
Try by pressing Volume down + Power while your phone is powered off
If you can start the bootloader maybe reflashing the ROM will fix the problem!
I recommend flashing from SD Card!
to do this simply rename your .nbh file to JADEIMG.nbh und copy it on a clean SDCard. Insert the SD Card to your Phone and lunch the bootloader.
A info screen apears and you just have to press "power" to start flashing.
Hope this will Help!
So long
Acid
this metod I try, I know that I have pressing volume and power button. I try reflashing from sd card. Jade are booting and restart , booting and restart. After flashing from sd card jade say flassing succesfuly. I don't know what to do
sorry for my english