Related
First of All I want to thank everybody in this forum I've learned a LOT from you guys..
I have a question though.. does flashing a SHIPPED ROM (not a DUMPED ROM) after CID-unlocking the device with HardSPL causes the device to brick??
In other words.. does a shipped ROM contain SPL?? cause I read that HardSPL cannot be overwritten so that may brick the device..
Sorry if that question has been answered before.. I tried the WIKI but I couldn't get a definite answer..
Thanks in advance..
Fa7my said:
First of All I want to thank everybody in this forum I've learned a LOT from you guys..
I have a question though.. does flashing a SHIPPED ROM (not a DUMPED ROM) after CID-unlocking the device with HardSPL causes the device to brick??
In other words.. does a shipped ROM contain SPL?? cause I read that HardSPL cannot be overwritten so that may brick the device..
Sorry if that question has been answered before.. I tried the WIKI but I couldn't get a definite answer..
Thanks in advance..
Click to expand...
Click to collapse
All shipped ROMs contain an SPL.
If you have a Hard SPL it will not allow flashing of ROMs with built-in SPLs. That's the point of it being called a HARD SPL.
If you have the USPL instead of Hard SPL it will allow flashing of ROMs with built-in SPLs (but not safe).
If you don't have any USPL/Hard SPL, but just the stock SPL and you use the white screen method instead to flash, it's even less safer AND NOT RECOMMENDED.. because, if you brick your device you won't be able to flash anything from Bootloader since you only have the original SPL.
The white screen method is only used to flash the USPL or Hard SPL. If you have a Hard SPL, the white screen method is the only way to downgrade to another SPL.
You can remove the SPL from the shipped ROM though.. (i.e. use NBHextract.exe to grab all the components then rebuild just the OS.nb with HTC ROM Tool).
For more questions, just search or post in the correct thread.
thnx dsixda.. u r the best
can someone add the bloody response from dsixda to the roll up thread or something?? maybe it will save sometime for the n00bs (and for the rest of us too).
good day sir...
so by using this (i.e. use NBHextract.exe to grab all the components then rebuild just the OS.nb with HTC ROM Tool) is the safest way to downgrade lets say from WM 6.5 to WM 6 ?
I'm downloading this file:
RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe
Device: ELF0100*0
CID: DOPOD001
Version: 2.20.707.1B
Language: USA
for my:
Touch version : Elfin
Device ID : ELF010050
CID : DOPOD001
IPL : 3.10.0002
SPL : 3.10.0000
I used NBHextract.exe to extract the files to make ROM my question is should I add the ext_ROM or just the OS coz If I want to revert back to its original state I can flash it with this "original" OS.
-by the way what OS version is this : RUU_Elfin_DOPODASIA_WWE_2.20.707.1B_4.1.13.51_03.0 7.90_BLUE_Ship_Reduced.exe
WM 6.0 or WM 6.1? thanks
Hello all,
I recently purchased HD2, the first thing I did was going to HTC website and downloaded the latest ROM Version: 1.66.415.3, now my SPL version is 1.66000 XE. I searched the forum before posting this thread, but I did not find a clear post that answers my questions, and I am still a newbie in modding field, so please bare with me.
This ROM includes Arabic language support which I need, but its quite bugged, in away that most of the menus are in Arabic now, and even though I chose from the settings to have them in English, even disabling multi-language support wouldn't change the menus to English and they still are in Arabic.
More over some bugs, like the Arabic supported Keyboard will always play a very high click sounds, even if I reduce the volume, put it on Silent or Vibration, everything will be silent except for the Arabic Keyboard would still play the clicks.
So i thought there must be a fix for it, and the best possible way to do it in my opinion is Via installing HSPL, now the problem is I can no where find how I am able to Roll back to SPL 1.42 so that I can install HSPL, since i have SPL 1.66, So my question is, Does anyone know how and where can I roll back to SPL 1.42 so that I can install HSPL ?
My second question, Is there any Custom Rom that have full Arabic support meaning I can type and read Arabic Websites/Messeging/Email/MMS and such ? I saw Seatone's ROM that indicates Arabic Support, but I cant find anywhere to what extent it is ?
My third question is after rolling back to SPL 1.42 from SPL 1.66 and installing HSPL (assuming that this process is possible), Can I update to Newer SPL and still have HSPL installed ? or I would have to remove the HSPL in order to update my SPL ?
My last question is regarding RADIOS, can I install multiple RADIOS or I can only have one installed at a time ? Also for Backing up my ROM on my device (assuming I dont have the software on the PC), how do I do it ?
Eventually thanks for your time and consideration to help me in this matter, looking forward to hear some answers !!
All the official roms can be download here.
http://rapidshare.com/users/258XUJ
once download, I think you can just follow the procedures for removing HSPL to put it back to a standard factory state.
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
BAZ007 said:
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
Click to expand...
Click to collapse
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
fyase said:
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Click to expand...
Click to collapse
Oh thanks alot, explains much, Do you have any idea about my other questions ?
Is there any Custom Rom that have full Arabic support meaning I can type and read Arabic Websites/Messeging/Email/MMS and such ? I saw Seatone's ROM that indicates Arabic Support, but I cant find anywhere to what extent it is ?
After rolling back to SPL 1.42 from SPL 1.66 and installing HSPL (assuming that this process is possible), Can I update to Newer SPL and still have HSPL installed ? or I would have to remove the HSPL in order to update my SPL ?
My last question is regarding RADIOS, can I install multiple RADIOS or I can only have one installed at a time ? Also for Backing up my ROM on my device (assuming I dont have the software on the PC), how do I do it ?
Thanks alot in advance ...
BAZ007 said:
Thanks for the reply, but i think you got me wrong.
I dont have HSPL on my device currently, I have Factory SPL version 1.66, I want to install HSPL, but in order to do so I need SPL 1.42, the link you provided only includes SPL 1.43 ... and from what I read I HAVE to HAVE SPL 1.42 in order to install HSPL, please correct me if I am wrong ?
Click to expand...
Click to collapse
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Help
Good Night.
I have a HTC HD2 with the 1.66.0000 XE SPL, and with the following ROM "RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship"
Because i update the ROM from the HTC Website, and it gave me that ROM, after i update it i notice that it is in NLD (Nederland), now i want to install other ROM and i Can't.
I want to do HSPL but to do that i need the SPL-1.42.000, to have that SPL i have tried to install other ROMS, but it had failed all the times with the following Error ("ERROR [294] : INVALID VENDOR ID ").
Need some help with this, because e don't understand NLD (LOL), and i want to install a PTG ROM.
.
Can anyone give me a hand? I have Telstra HD2 using on ATT in the U.S. and flashed to this ROM
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
When I check the bootloader it says
SPL-1.42.HSPL
However when I try to HSPL it says.
You must have SPL 1.42.0000 and errors out. I read that if I flash any shipped OEM ROM it'll put it back to 1.42.0000 but it doesn't appear to be doing that.
Any help would be appreciated I'm trying to get any HSPL on this thing. I've also tried HSPL2 to no avail. It said bad ID or something.
Thank you in advance.
juiceppc said:
Can anyone give me a hand? I have Telstra HD2 using on ATT in the U.S. and flashed to this ROM
RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship
When I check the bootloader it says
SPL-1.42.HSPL
However when I try to HSPL it says.
You must have SPL 1.42.0000 and errors out. I read that if I flash any shipped OEM ROM it'll put it back to 1.42.0000 but it doesn't appear to be doing that.
Click to expand...
Click to collapse
1.42.hspl means hspl is installed, it MUST have been installed for you to flash that wwe rom.
flash what you want using usb and job done.you are seeing a problem that doesn't exist
Any help would be appreciated I'm trying to get any HSPL on this thing. I've also tried HSPL2 to no avail. It said bad ID or something.
Thank you in advance.
Click to expand...
Click to collapse
hspl2 doesnt work on telstra.
samsamuel said:
1.42.hspl means hspl is installed, it MUST have been installed for you to flash that wwe rom.
flash what you want using usb and job done.you are seeing a problem that doesn't exist
hspl2 doesnt work on telstra.
Click to expand...
Click to collapse
Thank you! I didn't even think to try. It worked. GTX right now!
fyase said:
Install a Shipped ROM like 1.43 / 1.48 and at the end you will should have installed the SLP 1.42
Click to expand...
Click to collapse
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Valenzuela said:
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Click to expand...
Click to collapse
You will want the WWE (World Wide English) Rom, it is there on that rapidshare link that was posted earlier .....
Valenzuela said:
Will this also work for U.S HTC HD2 ???
Because i overviewed the list of Rom downloads on Rapidshare and they have Asia, UK etc.. Which one shall i get for my U.S HD2?
Thanks in advanced!
Click to expand...
Click to collapse
watcher64 said:
You will want the WWE (World Wide English) Rom, it is there on that rapidshare link that was posted earlier .....
Click to expand...
Click to collapse
STOP
when you say "us hd2" do you mean a tmous? t mobile us? because if yes, then those roms will kill your phone.
ONLY flash tmobile roms or tmous compatible cooked roms to a tmous.
hey.i really need help with this im New A THIS ...I JUST WNT TO FLASH MY HD2 BACK TO SPL 1.42.0000 .TO FLASH DROID ON IT..CAN SOMEONE PLZ HELP ME..JUST TELL ME WAT TO DOWNLOAD IN WERE TO GET EVERY THING ELSE THANK YOU...
Flashing from 2.10.000 to 1.43
Trying to flash a TMO HTC HD2 and I keep getting an update error 262.
ERROR [262, 276, 284, 302] : UPDATE ERROR
I have tried doing the soft reset 5 times now and I keep getting the same error. Am I doing something wrong that I am not seeing?
konspiracy said:
Trying to flash a TMO HTC HD2 and I keep getting an update error 262.
ERROR [262, 276, 284, 302] : UPDATE ERROR
I have tried doing the soft reset 5 times now and I keep getting the same error. Am I doing something wrong that I am not seeing?
Click to expand...
Click to collapse
There are NO 1.43 roms that will work on your tmous, you WILL permanently destroy it if you do manage to flash one. The tmous will ONLY take roms version 2.x or higher
you are very lucky that you dont have hspl installed, else it would let you flash, and your phone would be dead.
So what do we do if we have tmous and want to install HSPL?
orange_penguin said:
So what do we do if we have tmous and want to install HSPL?
Click to expand...
Click to collapse
use hspl3.
can i know the SPL version of the ROM before i download it ??!
i have 1.66.0000 SPL version and i want to change to 1.42 or 1.43 version
note: i have ROM version: { 1.66.415.3 (76641) wwe } , ROM date : 01/18/10
you need to find a stock rom that matches your region and provider that is version 1.43 or 1.48.
thank u....
i see but as they say in HTC web .... u can't do downgraded for the ROM !!!
is the rom locked to provider? if the HTC website says no to your serial, then it is locked to provider, so you must get roms for that provider, that is ver 1.43 or 1.48.
thanks,..
Is the SPL the same in all ROMs......??
I mean that if i change my ROM, the SPL will be the same or will change??!
To the OP,
Please ask all your spl and rom related questions in this thread to avoid duplication. I have closed the other thread down.
Thanks
WB
ok , i am still new , and don't know the rules
Thanks EddyOS , but....
How can i flash the stock ROM i started with using the SD card method to get the SPL back on ?!!!
hamaydeh said:
Thanks EddyOS , but....
How can i flash the stock ROM i started with using the SD card method to get the SPL back on ?!!!
Click to expand...
Click to collapse
There is a tutorial sticky in the Rom Dev forum on here. Take a careful look at it then proceed once you FULLY UNDERSTAND what you are doing.
Thanks
WB
Hi guys,
Need some step by step help.
I believe the HD2 is locked to the O2 in the UK and it is still have the very old 1.48 rom and I would like to upgrade to the latest 1.66 but when I try to download the rom from the HTC site it said the rom is not for my phone after I enter my Serial Number.
So, any one know which SN i need in order to download the 1.66 rom in English WWE? Also, what do I need to install the rom with my O2 locked HD2? I am sure even if I have the rom the upgrade won't let me because it is locked to O2 UK. Please help!
All I want is to make my HD2 better (than the stupid Iphone)
kingdanny said:
Hi guys,
Need some step by step help.
I believe the HD2 is locked to the O2 in the UK and it is still have the very old 1.48 rom and I would like to upgrade to the latest 1.66 but when I try to download the rom from the HTC site it said the rom is not for my phone after I enter my Serial Number.
So, any one know which SN i need in order to download the 1.66 rom in English WWE? Also, what do I need to install the rom with my O2 locked HD2? I am sure even if I have the rom the upgrade won't let me because it is locked to O2 UK. Please help!
All I want is to make my HD2 better (than the stupid Iphone)
Click to expand...
Click to collapse
I've already tried and downloaded it using a different serial. The updater then prevents you from flashing as it checks the serial prior to flashing.
Your best bet is to flash using a ROM in the ROM forum section.
mh....changing rom isnt very difficult..
but: i would only do, if really needed.
i'm also using 1.48 and i don't wanna change since an official rom supports landscape manila.
but if you want, do this:
choose the right S/N here and download your ROM.
when you've got it, you need to install HSPL first.
all about HSPL is written in this thread.
after installing hspl successfully, you can run the RUU.exe, which you downloaded from htc.com .
but think about it carefully...it could void your warranty
but all about that in hspl thread.
good luck.
DN41
Instal HSPL2 from the HSPL/HSPL2 thread in rom development. (It is fully reversable, your warranty is only temporarily void)
Then go to the Leo Official Roms thread in rom development, first post, first link, brings up a list of folder
1.42
1.48
1.66
etc etc
Look in the 1.66 folder for one with 'HTC' and 'WWE' in the title (world wide english and HTC unbranded)
Download it, and with your phone connected to usb, run the exe you downloaded.
THis WILL of course reset your phone completely, so be sure and back up your data first.
guys I didn't need HSPL when I updated. I was using the stock ROM, then I downloaded the official 1.66 ROM from this forum (coz my serial gave an invalid error on HTC website). I just connected with USB and ran activesync/windows mobile device manager and ran the .exe file of the update.
so your leo wasn't "branded".
where did you buy it?
DN41
oh yer of course, how n00b of me to forget that. Yer mine was bought online from handtec (official reseller).
EDIT: Sry kingdanny, just ignore my post. You may get confused otherwise.
I was just wondering if anyone in Australia has tested this new ROM on their HD2 device as I'm interested in experiences people are having with it. I got a response back from HTC that says the included versions are as follows:-
OS Version:
5.2.21869
Manila Version:
2.5.20121431.1
ROM Version:
1.72.841.0
Radio Version:
2.07.51.22.2
Protocol Version:
15.32.50.070
HTC claim that it improves SMS messenging and improves the overall touch responsiveness and software lag on the device. Can anyone confirm as I'd like to know before I make the effort to upgrade/reinstall everything. I'm also hoping phone reception and bluetooth audio has been improved in the Radio version upgrade included in this ROM.
Non related advice
brado23 said:
I was just wondering if anyone in Australia has tested this new ROM on their HD2 device as I'm interested in experiences people are having with it. I got a response back from HTC that says the included versions are as follows:-
OS Version:
5.2.21869
Manila Version:
2.5.20121431.1
ROM Version:
1.72.841.0
Radio Version:
2.07.51.22.2
Protocol Version:
15.32.50.070
HTC claim that it improves SMS messenging and improves the overall touch responsiveness and software lag on the device. Can anyone confirm as I'd like to know before I make the effort to upgrade/reinstall everything. I'm also hoping phone reception and bluetooth audio has been improved in the Radio version upgrade included in this ROM.
Click to expand...
Click to collapse
Can't really comment on this as it did not stay on my HD2 long enough for me to find out. I can however tell you that you cannot flash HSPL from this rom. It sets your SPL to 1.66 which HSPL2 cannot seem to deal with. I had to downgrade to the older rom version and then run HSPL1.
Why do want all that terrible telstra bloat? I can tell you your phone will run much faster without it.
I don't want all the Telstra bloat, I hate it. I was encouraged when I saw the message from HTC that all carrier customisations would be removed after upgrading the ROM
If I don't go with this HTC ROM, what custom ROM do you recommend? I assume Energy?
BlueAnt1958 said:
It sets your SPL to 1.66 which HSPL2 cannot seem to deal with. I had to downgrade to the older rom version and then run HSPL1.
Click to expand...
Click to collapse
just to correct you slightly, HSPL2 wont work on any telstra, nothing to do with the spl version, it is the telstra model ID that fails hspl2.
You are correct about HSPL needing 1.42.0000 to install though.
Personal Choice
brado23 said:
I don't want all the Telstra bloat, I hate it. I was encouraged when I saw the message from HTC that all carrier customisations would be removed after upgrading the ROM
If I don't go with this HTC ROM, what custom ROM do you recommend? I assume Energy?
Click to expand...
Click to collapse
I like Energy but there are quite a few other roms out there. ROMs are such a personal choice. What works best for me may not be to your taste. Try a few and see how you go, Most of the chefs in here have been around for quite a while and are very experienced in cooking so you really can't go wrong. Just don't forget to HSPL your phone first and read the ROM threads regarding which radio rom will work best with their ROM.
samsamuel said:
just to correct you slightly, HSPL2 wont work on any telstra, nothing to do with the spl version, it is the telstra model ID that fails hspl2.
You are correct about HSPL needing 1.42.0000 to install though.
Click to expand...
Click to collapse
Ahhhh, thanks for the correction and enlightenment. I had a feeling it had something to do with the model ID as that is the error message I got when trying HSPL2. Sneaky Telstra bastards....
Ditto the problem with this new Telstra update, I had the same problem. It changes the SPL so to 1.66.0000 which will block any attempt to use another ROM or HSPL. Revert back to 1.48 and you'll be OK.
BillTheCat said:
Ditto the problem with this new Telstra update, I had the same problem. It changes the SPL so to 1.66.0000 which will block any attempt to use another ROM or HSPL. Revert back to 1.48 and you'll be OK.
Click to expand...
Click to collapse
if you plan on flashing cooked roms, but want to try the 1.66 update before hand, you can install HSPL first, and then when you run the .exe shipped rom (over USB), it will only change the rom and the radio, leaving HSPL installed.
BillTheCat said:
Ditto the problem with this new Telstra update, I had the same problem. It changes the SPL so to 1.66.0000 which will block any attempt to use another ROM or HSPL. Revert back to 1.48 and you'll be OK.
Click to expand...
Click to collapse
Thank you very much for the info! I got the telstra model. Unfortunately, I had upgraded the ROM officially to SPL1.66. And now I cannot use either HSPL or HSPL2 to flash the device!
Can you please tell me how to revert the SPL to a older version that I can use HSPL?? Thank you very much!!!!
samsamuel said:
if you plan on flashing cooked roms, but want to try the 1.66 update before hand, you can install HSPL first, and then when you run the .exe shipped rom (over USB), it will only change the rom and the radio, leaving HSPL installed.
Click to expand...
Click to collapse
My device originally had SPL1.42 on it. I did not flash to HSPL. And I upgraded to SPL 1.66 by flashing an telstra official rom, which brong me a SPL 1.66. And now I am stuck because I cannot use HSPL or HSPL2 to flash the SPL. Could you please tell me how to revert the SPL to an older version (1.42) then I could use HSPL to flash it again??? Thank you very much!!
-----------------------------------------------------------------------------------
I just realized that I could use the SPL revert procedure to revert the SPL
Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
All I need now its theolder Telstra ship ROM with SPL 1.42. I went to htc/australia wedsite, And they only have the new ROM available for download. Is there a place to download the older ship ROM?? Thank a lot!
Fallback to older rom
yiqing said:
My device originally had SPL1.42 on it. I did not flash to HSPL. And I upgraded to SPL 1.66 by flashing an telstra official rom, which brong me a SPL 1.66. And now I am stuck because I cannot use HSPL or HSPL2 to flash the SPL. Could you please tell me how to revert the SPL to an older version (1.42) then I could use HSPL to flash it again??? Thank you very much!!
Click to expand...
Click to collapse
This is easy, you just need to flash the older Telstra rom version that uses SPL 1.42.0000. The rom you are looking for is 1.49.841.1 and I think you can download it from HTCPedia. Just ensure it is the Telstra version. Flashing this will ovewrite your current 1.66 SPL back to the correct 1.42 SPL. When you have done this you can use HSPL version 1 and it will work. I know because I did it myself a few days ago
Correct. There is a telstra 1.49 (1.48?) rom floating about, several people have used it to downgrade. Start searching!
Feeling kind
yiqing said:
My device originally had SPL1.42 on it. I did not flash to HSPL. And I upgraded to SPL 1.66 by flashing an telstra official rom, which brong me a SPL 1.66. And now I am stuck because I cannot use HSPL or HSPL2 to flash the SPL. Could you please tell me how to revert the SPL to an older version (1.42) then I could use HSPL to flash it again??? Thank you very much!!
-----------------------------------------------------------------------------------
I just realized that I could use the SPL revert procedure to revert the SPL
Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
All I need now its theolder Telstra ship ROM with SPL 1.42. I went to htc/australia wedsite, And they only have the new ROM available for download. Is there a place to download the older ship ROM?? Thank a lot!
Click to expand...
Click to collapse
To save you searching here is the link. You will need an account to download it. easy to do and free.
http://htcpedia.com/forum/showthread.php?t=1474
BlueAnt1958 said:
This is easy, you just need to flash the older Telstra rom version that uses SPL 1.42.0000. The rom you are looking for is 1.49.841.1 and I think you can download it from HTCPedia. Just ensure it is the Telstra version. Flashing this will ovewrite your current 1.66 SPL back to the correct 1.42 SPL. When you have done this you can use HSPL version 1 and it will work. I know because I did it myself a few days ago
Click to expand...
Click to collapse
Thanks a lot Buddy!!
Appreciape your (Blueant and Samsamuel) help! ^_^ I had downloaded this ROM and installed back to my device. Its pretty straight forward, just like a normal ROM upgrade! Thanks for your help again and I am start "Flashing EVerything" now!
I am also from Australia and I am having the exact same problem. My phone was purchased through Telstra and is locked to Telstra.
I have the 1.49.841.1 ROM installed and I cant flash to a HSPL/HSPL2 because I cant put any of the required ROMS on my phone:
SPL 1.42.0000 SPL 1.42.HSPL
SPL 1.62.0000
SPL 1.66.0000 SPL 1.66.HSPL
SPL 2.07.0000
SPL 2.08.0000 SPL 2.08.HSPL
Click to expand...
Click to collapse
I cant unlock my phone with MaUpgradeUt_noID.exe or anything else.
I am running out of ideas. If i try and install:
RUU_Leo_TMO_UK_1.43.110.0_Radio_Signed_15.25.50.07U_2.04.50.20_3_Ship
I get an error "Error 294 - Invalid Vender ID". So i google for some answers and i get:
pocketnow.com/tweaks-hacks/htc-hd2-custom-roms-waiting-hardspl
and
forum.xda-developers.com/showthread.php?t=252704
Some how I can't get a correct software to unlock my phone so i can install a compatible ROM.
Anyone got any ideas?
thanks.. HEAPPSSS BLUE ANT..
THANKS.. I GOOGED THE ROM BUT I COULD NOT FIND IT.. UNTIL I FOUND THIS POST OF YOURS WITHT HE htc pedia link..
cheers
I am having the same problem. Telstra branded device, downgraded to SPL 1.42 and still cannot HSPL. Critical Error, Bad Model ID. ARGGGGG!!
bretto69 said:
I am having the same problem. Telstra branded device, downgraded to SPL 1.42 and still cannot HSPL. Critical Error, Bad Model ID. ARGGGGG!!
Click to expand...
Click to collapse
hspl or hspl2? hspl2 doesnt work no matter what version spl you have. Use the first hspl.
try flashing RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe and then the original HSPL and then a new ROM...
linky - http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html under the 1.48 folder
Telstra HD 2 not locked
Wilo300zx said:
I am also from Australia and I am having the exact same problem. My phone was purchased through Telstra and is locked to Telstra.
I have the 1.49.841.1 ROM installed and I cant flash to a HSPL/HSPL2 because I cant put any of the required ROMS on my phone:
I cant unlock my phone with MaUpgradeUt_noID.exe or anything else.
I am running out of ideas. If i try and install:
RUU_Leo_TMO_UK_1.43.110.0_Radio_Signed_15.25.50.07U_2.04.50.20_3_Ship
I get an error "Error 294 - Invalid Vender ID". So i google for some answers and i get:
pocketnow.com/tweaks-hacks/htc-hd2-custom-roms-waiting-hardspl
and
forum.xda-developers.com/showthread.php?t=252704
Some how I can't get a correct software to unlock my phone so i can install a compatible ROM.
Anyone got any ideas?
Click to expand...
Click to collapse
I was also told my HD2 was locked to Telstra but it was not, (I don't believe any of them are now) I can send you the rom I used if you like? HSPL2 won't work as has been said before but HSPL does.
Another option I used while trying to get the right rom/HSPL working was to use SSPL, this worked great but does not allow you to change the radio, and until you can do that there are a few roms you cant use as they don't get on with the Telstra radio.
ps. I had a lot of similar error messages along the way...
I Got it, works perfect, I used the latest T-Mobile Rom from the U.S. on my T9193 Telstra, and its beautiful..thanks everyone for all the very helpful info, I could'nt have done it without you guys and keep up the good work..