Related
You've got two multicolour led's, at least one is multi colour, green blinking for network, orange when charging and green when fully charged.
Blue for bluetooth, obvious .
Now i wonder, how do i turn them off?
Is there a tool to do that ?
Im intrigued! Why?
When i'm watching divx with tcmp, i hate those blinking led's in front of me.
That's it
BYM said:
When i'm watching divx with tcmp, i hate those blinking led's in front of me.
That's it
Click to expand...
Click to collapse
how about just putting it flight mode? oh and turning bluetooth off?
Search is your friend
http://forum.xda-developers.com/showthread.php?t=270283
BYM said:
You've got two multicolour led's, at least one is multi colour, green blinking for network, orange when charging and green when fully charged.
Blue for bluetooth, obvious .
Now i wonder, how do i turn them off?
Is there a tool to do that ?
Click to expand...
Click to collapse
Try
HKLM\Drivers\BuiltIn\AllLEDMgr\Index
change the value to 0
Gavin01 said:
how about just putting it flight mode? oh and turning bluetooth off?
Click to expand...
Click to collapse
Buuuuuhhhhhtttttttt, how about JUSt turning the LED's off?
That was my original question, to turn off the LED's.
All other functions must remain available.
(Logitech Bluetooth Stereo )Headset, and when the phone rings i must pickup when on standby duty ......
PReDiToR said:
http://forum.xda-developers.com/showthread.php?t=270283
Click to expand...
Click to collapse
But this is not a functional solutionas far as i read the article.
Searched and found that topic myself already by the way.....
For ur this simple prob u can simply paste a small piece of matching dark coloured tape so that they dont disturb u nemore. lol........
LOL, no that's covering up, not shuttung down
So anyone any ideas jet ?
They bother me a lot when traveling at night time, and it's in the holder, i want to be able to shut them down please.
Tape is no option.
They can be controlled and disabled, but it'll be messy to disable them. There are various drivers scattered around that want control of the leds.
V
vijay555 said:
They can be controlled and disabled, but it'll be messy to disable them. There are various drivers scattered around that want control of the leds.
V
Click to expand...
Click to collapse
Network, Charge and of course Bluetooth traffic are the ones i guess ?
How does one control these things, have you got any idea ?
The thing is, it's distracting me a lot when driving the car in the dark, that's why i ask. Also when watching divx it's distracting
The method I could write would be messy, inelegant. Easiest way is to disable allledmgr.
V
vijay555 said:
The method I could write would be messy, inelegant. Easiest way is to disable allledmgr.
V
Click to expand...
Click to collapse
Sounds like a solution to me?
I have no idea to enable or disable allledmgr, can i do that in the Registry perhaps ? Would you like to teach me how to do that ?
Grtzzz from Amsterdam, The Netherlands.
You could always open the case up and try removing the LEDs.
pug said:
You could always open the case up and try removing the LEDs.
Click to expand...
Click to collapse
Yeah, or buy a Nokia 8210 ....
Come on get serious
OK then, I'll be serious.
I have looked into this quite extensively in the past, tried hacking all sorts of settings in the registry and all I have managed to do in the past is turn off the network LED.
As far as I'm aware and have been able to work out, the Bluetooth and the WiFi are controlled by either the drivers or the hardware itself rather than registry settings and modifying the drivers is beyond my capabilities. Of course, if it's hardware then there's nothing that can be done.
Come on Vijay, I know you of all people can do it, good luck.
Pug.
Here you go - VJImpoto, alpha release.
This will disable the LED driver (ie, battery charging leds, bluetooth, notification led, wifi led(?))
Note - by disabling the LED driver, the PDA won't be able to disable any currently activate leds, so eg if you're charging up (orange led active), and then run VJImpoto, the orange led will stay on until you soft reset whether you're charging or not.
So run it when you've got no LEDs on, and they'll stay off.
However: this is alpha, because I noticed that the "heartbeat" flash of the phone radio (green flash of led every few seconds) continues despite the LED driver being disabled: clearly that action is activated elsewhere on the system, so it'll need further investigation. However, this app merely disables AllLedMgr, so any flaws with that strategy carry here too.
Command line options:
-showinfo shows info on usage/donations
-debug shows feedback on whether it worked.
-killall killall will first attempt to switch off any active leds, so as discussed above, running VJImpoto -killall will first switch off the orange led, and then disable AllLEDMgr. However, this has the peculiar side effect of making the heartbeat flash now flash on the left green led on the Hermes. I recommend using -killall.
Please give feedback on if it worked for you. I'll make a cab later, .exe only for now.
VJImpoto
V
vijay555 said:
Here you go - VJImpoto, alpha release.
This will disable the LED driver (ie, battery charging leds, bluetooth, notification led, wifi led(?))
Note - by disabling the LED driver, the PDA won't be able to disable any currently activate leds, so eg if you're charging up (orange led active), and then run VJImpoto, the orange led will stay on until you soft reset whether you're charging or not.
So run it when you've got no LEDs on, and they'll stay off.
However: this is alpha, because I noticed that the "heartbeat" flash of the phone radio (green flash of led every few seconds) continues despite the LED driver being disabled: clearly that action is activated elsewhere on the system, so it'll need further investigation. However, this app merely disables AllLedMgr, so any flaws with that strategy carry here too.
Command line options:
-showinfo shows info on usage/donations
-debug shows feedback on whether it worked.
-killall killall will first attempt to switch off any active leds, so as discussed above, running VJImpoto -killall will first switch off the orange led, and then disable AllLEDMgr. However, this has the peculiar side effect of making the heartbeat flash now flash on the left green led on the Hermes. I recommend using -killall.
Please give feedback on if it worked for you. I'll make a cab later, .exe only for now.
VJImpoto
V
Click to expand...
Click to collapse
First and atmost :
THANK YOU VERY MUCH for taking the time investigating and writing a possible solution for my little problem, however how small the problem seems, i have many thanks for you!
Don't have the time right now, but when arriving home it's on the top of my priority list, right below eating
AND WHOW IT WORKS!
For 5 to 10 minutes, then they all start blinking again.....
Here are my findings :
When i shut down all communications, and run the program from pocket-explorer, it works like a charm, even the Phone heartbeat won't blink.
After a period of 5 to 10 minutes however, they start blinking again.
The funny thing is, when i shut down all comunications, they keep blinking!
After a soft reset the situation is like before, as it seems to me, and they blink how they are supposed to, and stop blinking when turned off all communication devices.
I will look for a command line tool, and try it that way, for further examination, and ofcourse for finding the donation part
(by Paypal i assume ?)
Hi, I've search but find nothing. Is there a software to let me know if I miss a SMS or a call by flashing the LEDs. I remember having a software like that when I got my palm, but now I can't find anything for WM6.
Anyone can help me ?
i would like to find this software also.
I hate how the orange blinking LED means a notification is waiting ........ I'd rather turn it solid. I waste too many seconds waiting for the light to blink to see whats going on with the phone. And I swear that in my peripheral vision, blinking green looks blinking orange, i give it a doubletake almost every single day.
If you are able to tweak the registry, take a look HERE
Search for the string 'fN'...hope this helps.
Thanks, but that only lets me set the number of seconds the LED blinks- it doesnt let me set it to solid and what color. Also that is wM5 tweaks and I am on (or am going to be very soon) WM6. Maybe it would still work though- but not what I'm looking for.
Thanks for the reply though!
Hi
I use my trinity as an alarm clock (as well as the 101 othering things including a phone!)
problem is the flashing lights annoy the hell out of me at night and i have to hide the phone under something to stop the green light acting like a beacon for every one wanting to pass on the right.
the hack turns off the lights but also the vibrate, which I use when in meetings.
Has anyone got or seen a simple tool to turn on or off the lights as required.
thanks in advance.
I lay my phone upside down on my bedside table then you don't see the lights!
Go kill the AllLEDMgr driver in the registry.
All LED will be gone - including normal notification LEDs like missed call or BT
You can couple it with say Mortscript to make a good toggle, only if you don't mind the reboot required.
hacking the reg
Disable flashing service LEDs
[HKLM\Drivers\BuiltIn\AllLEDMgr]"Index"=0
Note! Disables vibrating.As i said the hack stops the vibrate from working and I don't realy want to reboot after modifying the reg.
The FD said:
I lay my phone upside down on my bedside table then you don't see the lights!
Click to expand...
Click to collapse
This is also my method
But I agred with you, it's f***ing annoying that beacons
disabling the vibro don't surprise me at all - circuit wise a vibrator is just like an led so its natural to have turf up with it in the driver.
that said I heard vj was developing a led manipulation tool for the hermes. tyou may want to do a search yourself.
Could someone please advise whether the HD has different LEDs for Wi-Fi and Bluetooth? I can only see the red LED for charging at the top.
I would like to see blue LEd when Bleutooth is on and Green when WiFi is On, just like on previous HTC models
Thank you,
Unfortunately, there are no other LEDs for BT and Wlan. If you turn that on, it is not signaled by an Led.
Thank you!
lamajstro said:
Unfortunately, there are no other LEDs for BT and Wlan. If you turn that on, it is not signaled by an Led.
Click to expand...
Click to collapse
Many thanks for the confirmation....!
There is also no flashing green LED showing that the Phone is on as there was in the other HTC devices. I miss it because I could find my phone in a dark room.
maybe someone can create settings for it? a little program? especially for the status of the phone being on... would be nice!
tyronne1126 said:
maybe someone can create settings for it? a little program? especially for the status of the phone being on... would be nice!
Click to expand...
Click to collapse
I think it might be possible. I remember reading something a long time ago that someone disabled the flashing green light on another HTC device so maybe it can be switched on too.
You're right
Matterhorn said:
There is also no flashing green LED showing that the Phone is on as there was in the other HTC devices. I miss it because I could find my phone in a dark room.
Click to expand...
Click to collapse
LOL...I listen to music using A2DP and the LE light was crucial for me. I used phoneAlarm to try to activate each individual lED to ascertain, to no avail!
I see no point in removing all sort of LEDs; even using the virtual button; I would like to see the green and red lights for the telephone-related buttons when pressed to start and terminate a call. Haptic feedback is not always the best solution.
I guess the battery was so underpowered for the device that HTC opted to remove all lights/LED.
anyone that sees this.. can i make a request and ask if a program can be made or some sort of settings added to the phone to have the led flash to let you know the phone is on? or any other clever things you can come up with. !
thankss
Hi,
I have 2 issues with the TP2...
a) Keyboard Light - can it be set to a different value? Seems it is set to around 10 sec - tried Advanced Config..but that doesnt seem to work..also cudn't find anything in the Registry yet.
b) LED - the LED only seems to work during charging(Red/Green solid) = any program/Registry hack to use the LED for other Options (eg "new Mail" = Red blinking)?
Hope someone has the same issues and found a solution already
Thanks!
Regarding the notification light, you should RTFM. You don't need a hack. By default the notification light will blink green for missed calls, new SMS, and new emails. It'll blink amber for low battery warning.
Yea I would like the keyboard to stay lit longer as well. For the LED notifications make sure you select the "flash light for" in the sounds & notifications settings.
But it will not blink when there is missed call or sms when you are charging the phone though.
I don't have that problem with my previous X1.
LED & Keyboard Light
Hi Guys,
thanks a lot - stupid oversight of mine in reg to the LED
However still looking for the Keyboard Light..I used Advanced Config and set it to 30 sec..but that doesn't seem to work.
Also looked into the Registry but cudn't find anything related there as well.....
Cheers!
What are the reg entries for the LED lights? I would like diff colors as well
yes me too. please post your solution
I doubt the registry will give you different colour apart from the green, amber & red. It's a hardware thing.
Scann69 said:
I doubt the registry will give you different colour apart from the green, amber & red. It's a hardware thing.
Click to expand...
Click to collapse
Thats what I meant, different colors for different notifications
ohyeahar said:
Regarding the notification light, you should RTFM. You don't need a hack. By default the notification light will blink green for missed calls, new SMS, and new emails. It'll blink amber for low battery warning.
Click to expand...
Click to collapse
I guess its too bad then that the manual doesnt say this functionality is BROKEN.
i had to turn it off as it would continue to blink even after I cleared the notifications.
chongbh said:
But it will not blink when there is missed call or sms when you are charging the phone though.
Click to expand...
Click to collapse
I've searched and searched for a tweak or mod for that - I would MUCH prefer it blink for alerts / notifications, even when connected. Mine usually sits in the cradle when at home. If the LED blinked for missed calls / messages while in the cradle, I could see that at a glance from across the room, rather than going to it and looking at the screen.
Is there a tweak or mod to force the LED to blink, regardless of connection state? I don't care what color.
Thanks, Folks!
Joe
JRakes said:
I've searched and searched for a tweak or mod for that - I would MUCH prefer it blink for alerts / notifications, even when connected. Mine usually sits in the cradle when at home. If the LED blinked for missed calls / messages while in the cradle, I could see that at a glance from across the room, rather than going to it and looking at the screen.
Is there a tweak or mod to force the LED to blink, regardless of connection state? I don't care what color.
Thanks, Folks!
Joe
Click to expand...
Click to collapse
guys google nueLed that might work its an old program that controls the Led in many ways
I've seen references to nueLED, but also read of several issues with it on the newer devices (TP2s in particular.) I'll do some searching later today and see if I can come up with a later version and/or higher confidence level that it won't give me problems.
Thanks for the suggestion! Anybody else?
Well, I managed to do a bit of research about NueLED today. I keep finding too many comments in various threads on various forums that mention problems, particularly on TP2s and even more particularly with WM6.5. Perhaps most are overblown - I honestly don't know. But it's enough to give me pause. Above all else, I need to keep Touchie as stable as he is currently. That said...
Can anybody confirm that NueLED works reliably on the T7373 w/ WM6.5 (official HTC SEA ROM update) with no instability or quirks?
Beyond that, can somebody confirm that NueLED provides an option for the notification LED to blink even when connected to power? That is really my only interest. I'm fine with the current setup & colors, but would like the LED to blink for an alert when the device is in the cradle.
Thanks, as always, for the help and suggestions!