Database Users

How do you turn off bluetooth service light blinker?

Very annoying, I like having my bluetooth on at all times incase i wanted to use my headset.. but when I have my BT turned on, it constantly runs a lil service light thing and blinks every 10 seconds it seems.
Any idea?

Try VJEschaton it turns them all off.
M

... or use a registry editor and change
hkey local machine\drivers\builtin\AllLEDmgr
from default 1 to 0 to shut down ALL led activity.
A nice registry collection is combined in tweaks2k2.net program
Cheers

oltp: does VJEschaton turn the leds off?
I'm intending to write in code to enable vibrate etc (or did I already do that, can't remember!), but I thought the Blue led was independant. Be cool if it does.
I don't think the blue led can be activated by normal code AFAIK, think it's at a driver level - I wanted to make a nice red,green, blue, orange flasher, but it got too late in the night to continue
V

V: I thought it did, just tried again with BT on & it keeps flashing blue & green. Then switched BT off & toggled it to orange. Next toggle keeps it orange :-(. But now led off, turns it green.
So the off switches to orange & on to green. Funny but unintended I think. Toggle only turns it orange & that's it.
Btw using v0.11
M

oltp: that's what I thought. My feeling is that the API used to control the LED defines most PDAs as having one or two leds by design. I think this was in the old days with non phone versions. So I think the led being controlled is the default Orange alert led, so we can switch that on and off.
However, I suspect that the Power led and bluetooth led are tied into hardware/drivers. There might be a way to control them, but it would require more digging and might not be compatible with all hardware.
FYI: the second "LED" is actually the vibrator, so it can be controlled by the same code. There are functions to control stepper speed and duration etc, so you could possibly use it as I/O controller for a robot or something, it you're were perversly inclined, like me
V

So the old joke about the mobile phone comes back to a more controlled life ;-)
No good it's mine, it's mine, it's no longer mine :-( back to my old nokia again. First the kids & now...
A truly sad, M

Why you sad oltp? It's Sunday and I'm still in the office, that's sad
What did you want to do? Disable all leds? There's always a way...
V

V: I know I'm @ home teaching NFS Underground to the kids, it could be much worse. Like next week I've to work @ night.
Flighing lessons will probably turn off all leds, but hey it's Yze's question not mine. I keep the leds blinking, so I know it's working even though the screen is off.
So back to the basics: use tweaks2k2.net to turn them of. VJEschaton is still under development.
V: do you implement the BT switcher in VJEschaton or another tool?
Keep it cool, M

oltp: hopefully tonight I'm releasing VJVolubilis for some control of BT. When you say BT Switcher, what do you mean?
I don't have time to finish all of VJVolubilis, but like VJEschaton, it's a good place to start, and continue adding new features over time (hence the low version numbers, 0.11 etc!). I want to investigate the Blue & Gree Led, but this type of coding needs so much hunting and digging
V

V: BT switcher is for me a tool/shortcut to toggle the BT state (not necessarily on an incoming call lol)
M

Oltp: good, I've put that in already. There are other apps to do this, but VJVolubilis will do a few things in one place.
V

V: BT switcher is for me a tool/shortcut to toggle the BT state (not necessarily on an incoming call lol)
M

All LED's(even bluetooth) can be disabled by this program
http://www.pocketgear.com/software_detail.asp?id=2724

flashing lights

Hi
I use my trinity as an alarm clock (as well as the 101 othering things including a phone!)
problem is the flashing lights annoy the hell out of me at night and i have to hide the phone under something to stop the green light acting like a beacon for every one wanting to pass on the right.
the hack turns off the lights but also the vibrate, which I use when in meetings.
Has anyone got or seen a simple tool to turn on or off the lights as required.
thanks in advance.

I lay my phone upside down on my bedside table then you don't see the lights!

Go kill the AllLEDMgr driver in the registry.
All LED will be gone - including normal notification LEDs like missed call or BT
You can couple it with say Mortscript to make a good toggle, only if you don't mind the reboot required.

hacking the reg
Disable flashing service LEDs​
[HKLM\Drivers\BuiltIn\AllLEDMgr]"Index"=0
Note! Disables vibrating.​As i said the hack stops the vibrate from working and I don't realy want to reboot after modifying the reg.

The FD said:
I lay my phone upside down on my bedside table then you don't see the lights!
Click to expand...
Click to collapse
This is also my method
But I agred with you, it's f***ing annoying that beacons

disabling the vibro don't surprise me at all - circuit wise a vibrator is just like an led so its natural to have turf up with it in the driver.
that said I heard vj was developing a led manipulation tool for the hermes. tyou may want to do a search yourself.

LED

Could someone please advise whether the HD has different LEDs for Wi-Fi and Bluetooth? I can only see the red LED for charging at the top.
I would like to see blue LEd when Bleutooth is on and Green when WiFi is On, just like on previous HTC models
Thank you,

Unfortunately, there are no other LEDs for BT and Wlan. If you turn that on, it is not signaled by an Led.

Thank you!
lamajstro said:
Unfortunately, there are no other LEDs for BT and Wlan. If you turn that on, it is not signaled by an Led.
Click to expand...
Click to collapse
Many thanks for the confirmation....!

There is also no flashing green LED showing that the Phone is on as there was in the other HTC devices. I miss it because I could find my phone in a dark room.

maybe someone can create settings for it? a little program? especially for the status of the phone being on... would be nice!

tyronne1126 said:
maybe someone can create settings for it? a little program? especially for the status of the phone being on... would be nice!
Click to expand...
Click to collapse
I think it might be possible. I remember reading something a long time ago that someone disabled the flashing green light on another HTC device so maybe it can be switched on too.

You're right
Matterhorn said:
There is also no flashing green LED showing that the Phone is on as there was in the other HTC devices. I miss it because I could find my phone in a dark room.
Click to expand...
Click to collapse
LOL...I listen to music using A2DP and the LE light was crucial for me. I used phoneAlarm to try to activate each individual lED to ascertain, to no avail!
I see no point in removing all sort of LEDs; even using the virtual button; I would like to see the green and red lights for the telephone-related buttons when pressed to start and terminate a call. Haptic feedback is not always the best solution.
I guess the battery was so underpowered for the device that HTC opted to remove all lights/LED.

anyone that sees this.. can i make a request and ask if a program can be made or some sort of settings added to the phone to have the led flash to let you know the phone is on? or any other clever things you can come up with. !
thankss

TP2-Keyboard Light & LED

Hi,
I have 2 issues with the TP2...
a) Keyboard Light - can it be set to a different value? Seems it is set to around 10 sec - tried Advanced Config..but that doesnt seem to work..also cudn't find anything in the Registry yet.
b) LED - the LED only seems to work during charging(Red/Green solid) = any program/Registry hack to use the LED for other Options (eg "new Mail" = Red blinking)?
Hope someone has the same issues and found a solution already
Thanks!

Regarding the notification light, you should RTFM. You don't need a hack. By default the notification light will blink green for missed calls, new SMS, and new emails. It'll blink amber for low battery warning.

Yea I would like the keyboard to stay lit longer as well. For the LED notifications make sure you select the "flash light for" in the sounds & notifications settings.

But it will not blink when there is missed call or sms when you are charging the phone though.
I don't have that problem with my previous X1.

LED & Keyboard Light
Hi Guys,
thanks a lot - stupid oversight of mine in reg to the LED
However still looking for the Keyboard Light..I used Advanced Config and set it to 30 sec..but that doesn't seem to work.
Also looked into the Registry but cudn't find anything related there as well.....
Cheers!

What are the reg entries for the LED lights? I would like diff colors as well

yes me too. please post your solution

I doubt the registry will give you different colour apart from the green, amber & red. It's a hardware thing.

Scann69 said:
I doubt the registry will give you different colour apart from the green, amber & red. It's a hardware thing.
Click to expand...
Click to collapse
Thats what I meant, different colors for different notifications

ohyeahar said:
Regarding the notification light, you should RTFM. You don't need a hack. By default the notification light will blink green for missed calls, new SMS, and new emails. It'll blink amber for low battery warning.
Click to expand...
Click to collapse
I guess its too bad then that the manual doesnt say this functionality is BROKEN.
i had to turn it off as it would continue to blink even after I cleared the notifications.

chongbh said:
But it will not blink when there is missed call or sms when you are charging the phone though.
Click to expand...
Click to collapse
I've searched and searched for a tweak or mod for that - I would MUCH prefer it blink for alerts / notifications, even when connected. Mine usually sits in the cradle when at home. If the LED blinked for missed calls / messages while in the cradle, I could see that at a glance from across the room, rather than going to it and looking at the screen.
Is there a tweak or mod to force the LED to blink, regardless of connection state? I don't care what color.
Thanks, Folks!
Joe

JRakes said:
I've searched and searched for a tweak or mod for that - I would MUCH prefer it blink for alerts / notifications, even when connected. Mine usually sits in the cradle when at home. If the LED blinked for missed calls / messages while in the cradle, I could see that at a glance from across the room, rather than going to it and looking at the screen.
Is there a tweak or mod to force the LED to blink, regardless of connection state? I don't care what color.
Thanks, Folks!
Joe
Click to expand...
Click to collapse
guys google nueLed that might work its an old program that controls the Led in many ways

I've seen references to nueLED, but also read of several issues with it on the newer devices (TP2s in particular.) I'll do some searching later today and see if I can come up with a later version and/or higher confidence level that it won't give me problems.
Thanks for the suggestion! Anybody else?

Well, I managed to do a bit of research about NueLED today. I keep finding too many comments in various threads on various forums that mention problems, particularly on TP2s and even more particularly with WM6.5. Perhaps most are overblown - I honestly don't know. But it's enough to give me pause. Above all else, I need to keep Touchie as stable as he is currently. That said...
Can anybody confirm that NueLED works reliably on the T7373 w/ WM6.5 (official HTC SEA ROM update) with no instability or quirks?
Beyond that, can somebody confirm that NueLED provides an option for the notification LED to blink even when connected to power? That is really my only interest. I'm fine with the current setup & colors, but would like the LED to blink for an alert when the device is in the cradle.
Thanks, as always, for the help and suggestions!

[Discussion] Notification Led very bad, solutions?

Hello. Since I dont see any complains or posts about notification led, I create this post so we can share our opinions
I mean, our led is weak, not multicolor, it stops blinking after a few minutes, and when it is charging it is useless because does not blink at all (stays red).
The multicolor and weak issue it´s hardware..So I dont think there is any solution (multicolor is very useful, for example to tell apart whatsapp mesage or group, so maybe is more or less urgent..)
But, do you know any solution for "blinking time" issue and the charging issue. I read that Viper Rom has some Mod or something, but I prefer staying in stock for the time being (however, I do have root)
On the other hand, i have tried light flow app, but I do not get the led blinking, it keeps static
Thank you for your help!

Custom kernels have blink button led lights so the home and back buttons blink , this is excellent.

Javi22 said:
Hello. Since I dont see any complains or posts about notification led, I create this post so we can share our opinions
I mean, our led is weak, not multicolor, it stops blinking after a few minutes, and when it is charging it is useless because does not blink at all (stays red).
The multicolor and weak issue it´s hardware..So I dont think there is any solution (multicolor is very useful, for example to tell apart whatsapp mesage or group, so maybe is more or less urgent..)
But, do you know any solution for "blinking time" issue and the charging issue. I read that Viper Rom has some Mod or something, but I prefer staying in stock for the time being (however, I do have root)
On the other hand, i have tried light flow app, but I do not get the led blinking, it keeps static
Thank you for your help!
Click to expand...
Click to collapse
I think some GPE roms let you choose to have blinking led for notifications even when charging and yes, ViperOne lets you specify how long the led should blink for (its set to 60 minutes by default! lol) and you can also turn on led blinking when charging

Use Light Flow LED app from the play store. It provides an option to set different colors for different notifications.
Sent from my HTC One

HtcOneJon said:
Custom kernels have blink button led lights so the home and back buttons blink , this is excellent.
Click to expand...
Click to collapse
Really? Haha that's a very strange alternative, I'll take a look
Galactus said:
I think some GPE roms let you choose to have blinking led for notifications even when charging and yes, ViperOne lets you specify how long the led should blink for (its set to 60 minutes by default! lol) and you can also turn on led blinking when charging
Click to expand...
Click to collapse
Okey, so that could be a good solution. However I am gonna stay on stock rom until 4.4 goes out, then I surely will try some roms with this tweak
dvsk69 said:
Use Light Flow LED app from the play store. It provides an option to set different colors for different notifications.
Sent from my HTC One
Click to expand...
Click to collapse
Yeah mate I tried it, it seems to work, even it gets a weird yellow led, but the led stays static, I couldn't get it blinking

Came from a long line of blackberry's so the LED is probably one of the only things I really miss. You said you're rooted, have a look around in /system/customize/ACC/default.xml or whatever your CID's xml file is:
<item type="integer" name="NMS_feature_led_flash_timeout">5</item> - change the 5 to 0 and you should get no led timeout.
I also did the following (personal preference, I charge at night using a dock so i like to be able to glance over and see if theres anything waiting when on silent):
<item type="boolean" name="NMS_feature_flashlight_during_charging">false</item> - change from false to true and the led will blink for a notification even if it's charging.

Terrible LED is for me the only thing wrong with the One. Real shame. A partial solution for me is to install Dynamic Notifications (free/paid app) which give a Moto X type visual when notifications are received. I set it so the screen goes white instead of black and flashes every minute or so after a notification arrives. Still not ideal but saves relying on the crappy LED!

Anonymoos said:
Came from a long line of blackberry's so the LED is probably one of the only things I really miss. You said you're rooted, have a look around in /system/customize/ACC/default.xml or whatever your CID's xml file is:
<item type="integer" name="NMS_feature_led_flash_timeout">5</item> - change the 5 to 0 and you should get no led timeout.
I also did the following (personal preference, I charge at night using a dock so i like to be able to glance over and see if theres anything waiting when on silent):
<item type="boolean" name="NMS_feature_flashlight_during_charging">false</item> - change from false to true and the led will blink for a notification even if it's charging.
Click to expand...
Click to collapse
Really? That's so awesome. I will wait to arrive home to try that, just in case something goes wrong... But thank you so much, if it works.. That's all I was looking for
So then the only bad thing would be that it still weak and not multicolour. To be honest, is the only bad thing I can found in this amazing phone

You are wrong i think...
Javi22 said:
Hello. Since I dont see any complains or posts about notification led, I create this post so we can share our opinions
I mean, our led is weak, not multicolor, it stops blinking after a few minutes, and when it is charging it is useless because does not blink at all (stays red).
The multicolor and weak issue it´s hardware..So I dont think there is any solution (multicolor is very useful, for example to tell apart whatsapp mesage or group, so maybe is more or less urgent..)
But, do you know any solution for "blinking time" issue and the charging issue. I read that Viper Rom has some Mod or something, but I prefer staying in stock for the time being (however, I do have root)
On the other hand, i have tried light flow app, but I do not get the led blinking, it keeps static
Thank you for your help!
Click to expand...
Click to collapse
Dear friend the all think with the notification led is so wired for me.I bought my one with vodafone branded new with 4.1. something firmware i think.The notification led in that firmware was bright enough no problem at all.With the 4.3 firmware witch i had now the intensity of the notification led has reduced significantly, plus i noticed that if your phone switch of during to battery empty and then you plug it for charging, the notification led opens for 5 seconds as normal as in the previous android versions....then looses its power again....So i think that this is not a hardware problem .

Javi22 said:
Really? That's so awesome. I will wait to arrive home to try that, just in case something goes wrong... But thank you so much, if it works.. That's all I was looking for
So then the only bad thing would be that it still weak and not multicolour. To be honest, is the only bad thing I can found in this amazing phone
Click to expand...
Click to collapse
Yup, agree about the LED, the green/red is a hardware limitation by HTC so lightflow and other 3rd party apps don't work in changing the colour.
I didn't explain the above fully but let me know if you any issues, will be happy to help.

Hmm I have not noticed less brightness with the last update, I feel it as weak as before..
Anonymoos said:
Yup, agree about the LED, the green/red is a hardware limitation by HTC so lightflow and other 3rd party apps don't work in changing the colour.
I didn't explain the above fully but let me know if you any issues, will be happy to help.
Click to expand...
Click to collapse
That was perfect, just edited the file and it's all. So easy. People should know this tweak more, could be very helpful
Thank you so much

Anonymoos said:
Yup, agree about the LED, the green/red is a hardware limitation by HTC so lightflow and other 3rd party apps don't work in changing the colour.
I didn't explain the above fully but let me know if you any issues, will be happy to help.
Click to expand...
Click to collapse
Was just searching for light flow fix htc one and found this. Bummer but thanks

Would we cool if we at least could somehow mix the red/green blinks, ie having WhatsApp blinking red-green and LINE green-red. Is not much but at least would be something. You can even take it further and have more blinking states like green-green-red or red-green-red-green and so on. Xposed module anyone?

J_M_V_S said:
Would we cool if we at least could somehow mix the red/green blinks, ie having WhatsApp blinking red-green and LINE green-red. Is not much but at least would be something. You can even take it further and have more blinking states like green-green-red or red-green-red-green and so on. Xposed module anyone?
Click to expand...
Click to collapse
I was exactly thinking the same buddy!
also is there a way to make the 'back' and 'home' buttons bink, without installing another kernel?

killerbie said:
I was exactly thinking the same buddy!
also is there a way to make the 'back' and 'home' buttons bink, without installing another kernel?
Click to expand...
Click to collapse
I think it's possible (search on the Market). The main difference (I believe) is that the kernel-solution will not drain the battery (other than the power consumed by the lights) and a application should be running on the background all the time listening to all apps thus draining a lot more battery. This is just the way I see it, I don't not if it's really the case!

It stops after a few minutes because It would we shifty annoying if it's keep flashing in 2 hours...
Sent from my HTC One using XDA Premium 4 mobile app

Dvsconf said:
It stops after a few minutes because It would we shifty annoying if it's keep flashing in 2 hours...
Click to expand...
Click to collapse
That should be our decision, should't it?