Related
When I start Microsoft TAG on the HD2, the picture turns into a Green solid block and stays like that, I can never get to the point where the camera snaps on to the TAG and resolves it. Does anyone see the same behaviour? Otherwise the camera works fine.
I tried reinstalling Microsoft TAG but still face the problem, I also applied the HTC camera fix and it did not help.
Thanks.
That happens to me as well. I found that opening and closing the menu usually gets the camera to work.
However, once the camera's on, it's really difficult to align it with the barcode because it seems to move in a different direction to me. For instance, if I move the phone left the image on the screen will move up, if I move the phone down the image will move left and so on. It's very counter-intuitive and rotating the phone doesn't make any difference.
Same problems. I have complained to microsoft who do not have the HDt HD2 in their recognised phone list, though it is heavily highlighted by htem.
It is windows phone aka windows mobile 6.5, but since updating to the new ROM from HTC my screen says "Press Enter to capture..." which is a bit stupid as I don't have an enter key.
I have tried both the windows mobile and the windows phone variants of the software.
It worked subject to the above limitations before teh rom upgrade.
That happens to me now too... with ROM 1.43, no problem (not tested with 1.48) and with 1.61, it's the green problem you have..
Which ROM version do you have?
I am on 1.43, not sure if 1.61 is a safe ROM to update to....
HELP!? I just got a samsung galaxy s for t mobile. it was working fine till i installed an app(screen saver app)?
My prpblem is that the screen is now black. i cant see anyrthing but all of the bottem buttons still lights up including the top part of the screen, ( the reminder thing ). its kinda dumb of me, but i downloaded a sexy girl screensaver III, a women is moving in the back ground( look it up) i thought it was funy to have but now the jokes on me... i just need to get rid of this ap and uninstall it. i tried the turn off and hold vol - down - & press powerkey. doesnt take me to the factory boot menu for some reason. What is there for me to do ??? i just got this phone !!
Category
Consumer Electronics > Cell Phones & Plans
I cant access to anything on the phone because it is blank black. stupid screen saver ruined my life.
I have the WP7 installed. No dual boot.
I have a password protected lock screen, and every once in awhile, the touch screen wont work, so I can't slide up and put in the password. If I hit the windows button in the middle, it kinda bounces for a second, then goes dark again.
It happened yesterday too, and the only way I fixed it was to turn it off, take out the battery and then turn it back on again.
When the touch screen works, it works fine. It's perplexing.
Anyone else have this problem?
Yes, but I only have to tap on the screen and the touch screen is working again and I can slide up the screen. Had this happen with both of the builds I've used so far.
This didn't work for me. My phone's been locked all night.
Hmm, not really sure what it could be. Check with whoever built the rom you are using, they may have a better solution. Sorry I couldn't help more.
Its a hardware problem, not software, i had the same problem the solution is to change touch screen, try to press touch near red button for same time it can help, but not for long time.
Sorry for me english)
Common problem. Your touch screen is fried (or is in the processing of frying). Start the warranty process now.
fried? dunno mate, when my touch screen goes on the blink i sweep a finger in the opersite direction to what i usually do then try again straight after, so forinstance, at the lock screen i try up and it doesnt work, so i try down then up and that usually fixes it, same for the tile screen, if it wont work as i sweepleft, i sweep right then left.
this doesnt happn on android which i would think rules out an overall hardware fault, at least for me anyway, it is however hardware related, the HD2 shouldnt have WP7, the drivers are not designed for our device so expect these odd happenings.
Of course its equally likely that this could be another sign of the pain in the arse SD card issues some of us suffer, reflash and try a new SD card and see what happens.
Man its realy problem of touch screen because it breaks in zone of red button, and when you press it some times it goes ok, and works wery well, but it die from now, replace the touch or it will die in few - weeks- days.
i would seriously get that accusation backed up by some proof before someone does something they didnt need to do.
I have random unresponsive screen issues that are directly related to the install of WP7 it does not happen on android or WM, there for its not hardware, at least in my case, its driver
I really like my LG E900 phone. I bought it for AT&T in the USA unlocked on Amazon. Installed Mango recently with all the firmware upodates and until today been having a lot of fun with my phone!
All of a sudden today, the touch screen seems un-responsive. The touch screen works intermitently. It starts to work then stops again. I have tried resetting the phone (have to pull battery). I wasn't doing anything when I this happended. I recently installed Tango and Livestrong mobile app, otherwise phone was flawless.
1. Is my touch screen broken?
2. Does anyone have a clue. I thought maybe the phone is running apps in backround but I can't seem to find the problem. The battery seems to drain also.
3. The phone does become operation for minutes at a time but then goes bad.
I wanted to add that the screen is also very slow at first then starts to respond normally. Almost seems to something happening in the backround. As of now, the screen is still not responding. If I continue to play with the screen, sometimes the screen starts to respond, but slowly.
thanks for help!!
In your position, I would try to:
1. Use the guaranty (if it's still active) and take it to a local service
2. Flash a different rom/firmware with all the latest updates inside and see what happens.
3. Buy a new e900...they cost less than ever nowadays...(almost 180€-190€ without a contract...)
You have got to be kidding me, the exact same thing is happening to me, and for 2 days now. I'm unbranded (I believe) on Vodafone Spain. The entire phone has become unresponsive. Drops nearly every call, has rebooted about 50 times in the last 24h.
fUnny thing is, it doesn't ever reboot when I'm actively using it, just during lock screen.
cOuld you further develop your symptoms just in case we have the same issue? Thnx
Sent from my LG-E900 using XDA Windows Phone 7 App
More Detail about the LG E900 WP7 Lock Screen issue
OK. SO here are the symptoms-
- Whenever I enter the lock screen, the touch is screen does not respond. TO be clear the touch screen senses I am touching the screen but the lock screen doesn't move when swipe.
Ater some research you can find the SAME EXACT error on HTC Surrround Samsung Focus. here's the youtube video. exactly as it appears except time to unlock takes about 2:30 (2 minutes 30 seconds) on my LG
http://www.youtube.com/watch?v=t3QABdcTINc
So here is what happens and what I do
1. Again entering the lock screen, and attempting to unlock the touch doesn't reposnd to any swipes.
2. You continue to swipe and occasionaly hit the physical buttons. This keeps the lock screen on. You have to keep swiping for about 2:30. After 2:30, the touch screen just seems to respond.
3. After the touch screen responds. Nothing out of the ordinary. When I tried using IE, it seemed that IE didn't work as well. Pinch to zoom, swipes not as good. Also portions of the screen are not as responsive.
So maybe start looking for a replacement.
I've tried
- restoring previous OS and files. No change.
- Hard and factory reset. No change.
- changing the brightness setting (AUTO, low) no change
The only thing that I haven't done is upgrade/downgrade the firmware. I think that may help but not clear on what to do.
Are you using the correct charger?
I have an HP Touchpad that has a high output microUSB charger for rapid charging of the Touchpad's battery. Although it hasn't (yet?) given my e900h any troubles, I did read at least one report of a guy's Samsung phone reacting poorly with symptoms similar to yours after using the Touchpad's higher output charger.
I am using a third party USB charger. Not a high power one, but an inexpensive one from monoprice. Ok, I will try.
Sent from my LG-E900 using XDA Windows Phone 7 App
Some people have reported errors and crazy system behavior when using third party chargers...
Still no luck. Using stock charger now. Will wait to see if any improvements. Thanks everyone.
Sent from my LG-E900 using XDA Windows Phone 7 App
Muvolt said:
Some people have reported errors and crazy system behavior when using third party chargers...
Click to expand...
Click to collapse
I was one of them. This behaviour would occur with the charger connected.
I get the feeling the problem the OP and I are facing is also related to chargers, but no longer when they are connected. Charging makes no difference for me, the phone is still reacting very strange.
More Info on failiong touch screen
So
Here are more precise deets
- Whenever the backlight is turned off, the touch screen becomes non-responsive
- The touch screen notices touch but not swiping.
- in order to get the touch screen to respond you must continue touch the screen for 00:02:30 (2 minutes, 3 sec).
- the touch screen will usuallly start to respond to swipes but only a single axis (e.g. vertical or horizontal)
- after 2:30 the touch screen responds like everything is ok.
- the goal is to make sure the screen backlight stays on until the for 2:30. In some lock screen cases, you can issue a voice command, camera etc which effectly keeps the phone one (i.e backlight on) for longer without having to continuously touch.
- issues came after tangoi install and livestrong install.
- wonder if tango did something to lock screen
- also tried changing lock screen wallpaper - no changes
- when installing microsoft insider app, I tried using the wallpapers, but the apps crashes. Changing wall paper using default app works
- using default charger no changes
- received the latest update (fixed voicemail and outlook issues) - no change
I haven't been able to retore/flash NODO. That is probably what I need to do.
same problem here, new phone, original recharger and touchscreen of my optimus goes sometimes frenzy...the frequency of strange behavior raises when I fully recharge battery
i found a video on youtube, but yet i cannot send urls, because i'm new user here, u can find it if u search "problema telefono"
any1 have some solution, pls? or did u try to send the phone back to LG service?
Question 1. This just happened right now my s5 is starting up and sometimes it shows the s5 startup powered by android sometimes not after that it proceeds in starting up with the usual sound effects but the problem is the screen is just plain black. Now i believe my phone is proceeding to the homescreen cause i tried to ring it and it did plus my ringtone music played. I tried pulling the battery multiple times and start the phone but still same result. I also tried the taking the battery off and pressing the power button for a minute. also tried the safe mode, but none of them worked. What do you think? is it a firmware or a hardware issue?
Question 2. Im still not sure the cause of the problem. Because of the black screen issue i I wanted to backup my files saved in the phones memory. However my phone is locked through my fingerprint and I guess because of that when I connect my phone to the pc im unable to access my files. Is there anyway I can access my files through a pc and unlock it using my phone's fingerprint alternative password?
TIA
If the initial logo sometimes won't show up, it sounds more like hardware as that is not part of the ROM
If your phone is secured by fingerprint, wait for it to boot, press the home or power key to wake it up, then swipe like normal, if it's just a faulty screen, the fingerprint swipe should still work
*Detection* said:
If the initial logo sometimes won't show up, it sounds more like hardware as that is not part of the ROM
If your phone is secured by fingerprint, wait for it to boot, press the home or power key to wake it up, then swipe like normal, if it's just a faulty screen, the fingerprint swipe should still work
Click to expand...
Click to collapse
hey thanks alot swiping the through the black screen unlocked my phone. so do you think it is a hardware issue I assume its the LCD?
but if ever the LCD is broken , the finger scanner should also not be functional? or im wrong?
The finger scanner is a separate button (Home button)
There are two parts to the screen iirc, the digitizer (Touch) and the panel itself for displaying, could be just the panel if the digitizer is still working
You can use this to control your phone without a screen, might help
http://forum.xda-developers.com/showthread.php?t=2786395
i'm experiencing the same problem again. Before I guess after 40-50 restart I was able to open my s5 with a screen, but now it happened again and the difference is that when I boot it the "Samsung s5 powered by android" rarely shows and it will proceed until the home screen with a black screen?
i have already removed the battery, charged it, changed battery, boot it in recovery and safe mode but still all i'm getting is a black screen.
Any idea how to fix this? Is this a hardware issue already
kenchii17 said:
i'm experiencing the same problem again. Before I guess after 40-50 restart I was able to open my s5 with a screen, but now it happened again and the difference is that when I boot it the "Samsung s5 powered by android" rarely shows and it will proceed until the home screen with a black screen?
i have already removed the battery, charged it, changed battery, boot it in recovery and safe mode but still all i'm getting is a black screen.
Any idea how to fix this? Is this a hardware issue already
Click to expand...
Click to collapse
Hi kenchii17
As you didn't provide answer to @*Detection* 's suggestion for backup, here comes another:
[TOOL] Tickle My Android
To get rid of all this inconvenience, I would suggest a complete reinstall. Clear everything through Recovery and then flash a new Stock ROM via ODIN.
Nice regards.
.