Hello Blackstoners !
I have mini usb headphone for my stolen Elf
When I insert it in bottom of Blackstone ,
its says :
"The Device doesn't support the USB headset. Please Remove it "
Have any one stock of drivers of headphones mini usb To htc HD ??
thanks
Due to the 3.5mm jack, the usb port probably no longer supports headphones. You may just mess up the usb port settings by changing the usb drivers.
http://forum.xda-developers.com/showthread.php?t=457340
Maybe it is possible:
http://forum.xda-developers.com/showpost.php?p=2971276&postcount=10
MOD EDIT
Thread moved to general discussion as not relevent to this forum
blackstone have a miniusb connector
many other htc devices got extusb which is basicly a miniusb connector but
have 2 conectors on the empty side of the connector which transfer audio
there is no way to connect an extusb headset to a miniusb conntor as
there are no connectors the extusb audio connector can tranfer the autio to
Hello Again ,
I dont think Its Impossible!!
I am think that is 100% possible ...
I think its possible , I will try to contact the co0o0okers and we will see
best regards.
Mohammed Saeed
no it's not
mini usb pint out is
Pin 1 - VBUS
Pin 2 - D-
Pin 3 - D+
Pin 4 - unconnected
Pin 5 - GND
and this is how extUSB pintout is
http://forum.xda-developers.com/attachment.php?attachmentid=72494&d=1203885397
there are tons of more pins on extusb then miniUSB all of which would connect
to nothing in the phone if one connects an extusb headset
and miniUsb headsets only works with devices which support usb host and is a whole
different thing then extusb only 2 htc devices I know of support usb host and blackstone is not one of them
Related
hi, i am using my universal with tomtom and i would like to hide the cable conecting my universal to cig lighter ? can u people tell me where i can get i mini usb cable extender..cos i wanna connect my cig lighter to extender and then to universal ? please post me links with extenders, cheers, cudo
can anybody helo me with this issue ??
Why don't you buy a 'Y' cable on ebay as its name suggests it plugs into lighter socket and powers your PDA & GPS unit.
Mike
because this is not what I mean..I don't wanna charge my gps and universal at the same time...what I need the extender for is to extend the existing cigi lighter cable so that I can hide it nitly in my car. I need mini usb cablle extender not y cable. any way cheers, cudo
I have not seen any mini-USB type B 5 Pin connectors that are extension cables.
You might try a new cable that has a USB to mini USB 5 pin type B connector that has the length you need connected to a cigarette lighter with a USB output. This is what I use to charge my iPOD (with iPOD cable), Wizard, GPS, and iAudio mp3 player.
Something like this Cigarette lighter to USB:
http://www.semsons.com/unusbcarchar.htm
Something like this for a cable:
http://www.semsons.com/ustomiusb5sy.html
Or for a 10 foot cable:
http://www.buy.com/prod/Pro_Series_USB_2_0_5_Pin_Mini_B_Cable_10_feet/q/loc/101/10319608.html
hi, i have found the way around. just got myself a cig lighter extender
it works like a charm now...no cables hanging around..everything nice and tidy
cudo
Hi there.
I have a question. with the oem adapter that has miniUSB, i can connect any universal miniUSB to RCA cable and it will work, am i right?
No you will need the HTC Cables. The HTC connector is different from standard mino USB adapter since it has extra pins ( 11-pins to be exact).
Yes, but i was thinking about conecting an adapter to make the HTC usb to standard miniUSB and then connect a universal miniUSB to RCA cable.
Is it possible?
TV Out cable in Mumbai, India
i tried searching evrywhr in Mumbai, bt cudn't find TV Out cable....
in fact, even if i hav 11 pin mini USB socket, i will make my own TV Out cable....bt hav nt been able to get tht also
can someone guide me, whr to get 11 point mini usb plug (ESB) or TV out cable.....i hav searched Laminton rd, Alpha in Juhu, Ghatkopar, Chembur, but no luck
ne help on particular shop wil be really helpfull
crlnd132 said:
Hi there.
I have a question. with the oem adapter that has miniUSB, i can connect any universal miniUSB to RCA cable and it will work, am i right?
Click to expand...
Click to collapse
There is a thread around here somewhere about modifying one by grinding down a portion of the third connecting ring on the mini-plug. I´ve tried it and it seems to work fine, but you have to turn the plug to properly orient the missing area so that the phone does not recognize it as a headset.
I found on Ebay, It's about $18.
Hiya,
You'll all probably know that on the TouchPro, the HTC mini-USB jack allows headphones to be connected (via adaptor), as well as a 'remote' which answers/ends calls...
...which is excellent, because I was able to develop my own wired connection to my CK-7W car kit.
I would like to do the same for my SEX1, particularly given the unreliable nature of the bluetooth.
Q: Is the mini-USB port configurable to give audio-out, and potentially answer/end calls?
Kind regards,
Oms.
Oms said:
Hiya,
You'll all probably know that on the TouchPro, the HTC mini-USB jack allows headphones to be connected (via adaptor), as well as a 'remote' which answers/ends calls...
...which is excellent, because I was able to develop my own wired connection to my CK-7W car kit.
I would like to do the same for my SEX1, particularly given the unreliable nature of the bluetooth.
Q: Is the mini-USB port configurable to give audio-out, and potentially answer/end calls?
Kind regards,
Oms.
Click to expand...
Click to collapse
It should be, you can get usb headphones, with a talkbutton, that use a standard mini usb fitting.
the audio for the X1 goes to the 3.5mm jack? There is an answer button on the supplied cable.
I thought the USB port was only for USB and power - am I wrong?
I'm not sure most HTC phone have audio out by USB and Mobile fun has
HTC Multifunction Audio Cable YC A200
HTC TyTN/MDA Vario II 3-in-1 USB Adapter
HTC Multifunction Audio Cable YC A300
in the X1 area,
but can't find anything on the net saying it will work
I really want it to work so i only need to plug one cable in when its in the car phone and audio.
I would love to know if some one has tried them.
I'll let you knoe if i get one
I tried it with my Moto L7 USB headset. Nothing happens.
Sorry
I wish it would work too...
htc devices use the extUSB connector and use the extre pins not in normal miniUSB for these features
pins the normal miniUSB connecter the x1 uses don't have so it can't be don
x1 don't support usbHost so the miniUSb connector only have 2 functions
being connected to an usbHost like a computer
and charging no other functionality is possible for a device which
don't support usbHost
Hi Oms,
I've just came across your post about the wired connection you made from Touch Pro to ck-7w. I would like to make a similar setup for my Touch Diamond2. Could you please post your findings on this matter and connections details?
Hi. So I have the hands free from my former diamond 2. Now..is there any way that I can make the usb headset compatible with my Hd?
ronaldodo said:
Hi. So I have the hands free from my former diamond 2. Now..is there any way that I can make the usb headset compatible with my Hd?
Click to expand...
Click to collapse
Not exactly sure what you're asking, but I do know that regular mini USB cables work on the HD even though the HD doesn't exactly have a mini USB port (it has an extUSB port).
extUSB == miniUSB + audio
one can get converters from extUSB to 3.5mm
and I suppose one could make 3.5mm to extUSB too never seen any though
but one can't make extUSB -> miniUSB when it comes to audio as miniUSB is a serial digital interface which don't carry any type of audio
one can use a miniUSB cable to charge and datatransfer in a extUSB as the usb pins are the same
I have just purchased a HTC Multifunction adapter YCA300 connected to a TYTN II for giving me the flexibility to provide a charge and use some standard headphones/mic etc. The spec indicates IN LINE mic support for both the 2.5 and 3.5 mm headphone sockets.
I had hoped to be able to connect either of these sockets to my AUTOCOM motorbike intercom so that I can use my TYTN II as a GPS and also to receive the odd call.
Has anyone connected a Hands Free headset/mic to any of these sockets. I know the original MINI USB connector will work.
Will the 2.5 or 3.5 mm socket take a 4 pole connector and if so does anyone have a PINOUT diagram.
Thanks
ES