Related
I am one of those users that is having trouble connecting to GPRS more than once and getting the "unknown reason" problem. Only a soft reset or turn on/off flight mode will fix it. Well I found out what is causing this, at least for my device. I am running Wisbar Advance on mine and is what causing the problem. Once I closed the app, I can connect/disconnect GPRS as I please. I made calls in between also and it still works...
The developer for Wisbar is working on this issue so hopefully he will get this fixed. In the meantime, I have turned off Wisbar..
Hope this is what causing u guys' devices also.
Great info! Just a heads up. I had this problem since I upgraded to the 1.06 ROM however I have never installed Wizbar Advance. The only thing that I could get to fix it was upgrading to the Norwegian 1.11 ROM version or using the 1.10 US Radio stack. Even the Finish 1.11 did not fix the problem.
-Mashie
I have the problem and I'm not using Wisbar. I guess magician_os1.11wwe_bigstorage_6.zip is based on the Finnish ROM?
You can add another application to the list of problem apps (at least this worked for me)
Sygic .mobile contacts seems to mess up GPRS as well.
I've been using the 1.06 WWE rom, and i tried anasky's 1.11 bigstorage rom, and both times, with .mobile contacts installed, i received the "cannot connect for an unknown reason" error, after uninstalling it, GPRS reconnects fine everytime.
Hope this helps some of you.
i changed my sim card to a new one and now i don't get that error. plus i believe that part of that error is the service provider.
hope that helps
I have Qtek 1.11 and same problem too
It is a real pain, I do not have Wisbar, and I can only connect once then need a reset. Any ideas out there?
One cheap solution is to put the phone in flight mode and then go back to reset the GPRS. Not very smooth, but at least better than having to soft reset.
Loboman said:
One cheap solution is to put the phone in flight mode and then go back to reset the GPRS. Not very smooth, but at least better than having to soft reset.
Click to expand...
Click to collapse
I have tried to turn flight modem on/off but i still get the error
"dialed:isplnk1.swip.net. The answering modem has disconnected. To check your connection settings and change them if needed, tap settings"
Does ne1 know what I can do? so I can use my gprs again. it worked fine just a day ago, and I havent done anythin at all that could cause this problem
I don' t have a magician but a blue angel.
I've got the same problem.
It's the last built of IA Caller ID.
I've make a hard reset with no IA Caller and no problem again.
just double check the settings to make sure that the access point name shows up in the number section of the connection settings, when its not there that can cause the answering modem problems
rgds
j
I have 2 SIM Cards with the same number, one for the QTek 2020, and one for a Motorola mpx200.
If they are both switched on, then my GPRS is disconnected after about 15 minutes, and I can only reconnect by going in and out of flight mode.
If I switch the Motorola off, then I stay connected, and can disconnect
and reconnect properly.
Eddan said:
Loboman said:
One cheap solution is to put the phone in flight mode and then go back to reset the GPRS. Not very smooth, but at least better than having to soft reset.
Click to expand...
Click to collapse
I have tried to turn flight modem on/off but i still get the error
"dialed:isplnk1.swip.net. The answering modem has disconnected. To check your connection settings and change them if needed, tap settings"
Does ne1 know what I can do? so I can use my gprs again. it worked fine just a day ago, and I havent done anythin at all that could cause this problem
Click to expand...
Click to collapse
Never had that error message. Only the one hamsup1o was talking about. Is the Norwegian 1.11 Ananskyfied yet? I want to test if the problem is fixed in that one.
For me, I don't think it's any one piece of software. Since I upgraded my Jam last weekend to 1.11, it continually disconnects from GPRS. Soft resets may or may not correct the problem on the first try so a second reset is in order. Trying to turn Flight Mode On/Off is a chore in itself. I may need to tap "Turn Flight Mode On" several times before it finally does it. Even when GPRS is connected it will only last 5 minutes. Then while still connected, going to a different webpage, says that webpage cannot be found. Very freakin' frustrating!! :evil:
So, today at work I backed everything to SD and did a Hard Reset. I then cancelled out of the Operator settings, but allowed the other apps to install and soft reset. I manually added my data settings and connected. Within two minutes I lost my connection. Reset the device and couldn't connect. Reset again and it's fine. It's hit or miss. Restored from backup. Gave a MS Voice Command error so deleted that. Several resets later on the train ride home and it's been fine ever since, for now!
The question is, could this be a T-Mobile problem? I called them yesterday and all they could tell me is that data outages in the Boston area may occur in the evenings due to upgrades. Perhaps it's just a coincidence that I did the ROM upgrade and TMo is acting up. I'm pulling hairs here!!
smfa1965 said:
For me, I don't think it's any one piece of software. Since I upgraded my Jam last weekend to 1.11, it continually disconnects from GPRS. Soft resets may or may not correct the problem on the first try so a second reset is in order. Trying to turn Flight Mode On/Off is a chore in itself. I may need to tap "Turn Flight Mode On" several times before it finally does it. Even when GPRS is connected it will only last 5 minutes. Then while still connected, going to a different webpage, says that webpage cannot be found. Very freakin' frustrating!! :evil:
So, today at work I backed everything to SD and did a Hard Reset. I then cancelled out of the Operator settings, but allowed the other apps to install and soft reset. I manually added my data settings and connected. Within two minutes I lost my connection. Reset the device and couldn't connect. Reset again and it's fine. It's hit or miss. Restored from backup. Gave a MS Voice Command error so deleted that. Several resets later on the train ride home and it's been fine ever since, for now!
The question is, could this be a T-Mobile problem? I called them yesterday and all they could tell me is that data outages in the Boston area may occur in the evenings due to upgrades. Perhaps it's just a coincidence that I did the ROM upgrade and TMo is acting up. I'm pulling hairs here!!
Click to expand...
Click to collapse
I have the exact same problem with my Jam on T-Mobile (in Colorado) however it seems to have gotten better with the 1.11 ROM. The strange thing is that it does not ever happen with my 6315 on T-Mobile. I have spoken with their customer services serveral times and we have tried a few different things. The last thing we tried was a brand new SIM card to remove that as a posible problem. Since doing that, I can stay connected to GPRS, take calls and it re-connects with out me doing anything and it seems to have helped.
I have not tried to see if there is any change between wap.voicestream.com or internet2.voicestream.com. Which are you using?
I have the same problem with GPRS and the Cannot connect for an unknown reason. It initially connects fine, but if I disconnect it manually, I cannot reconnect without the soft reset. I started getting this error when I upgraded to 1.11WWE last night. I went back to Version 1.06WWE and the problem was gone so it is defiantely a ROM problem. Imate's Customer "Dis"-Service continues to timeout everytime I go online with them. I am in the process of trying the UK 1.11JAM Rom to see if that makes any difference. I am with T-Mobile USA.
On the Club I-mate forum there are people with this problem as well and one of them is on Cingular!!! So it's not carrier specific.
__________edit
I tried the UK 1.11 ROM and it worked a bit better. There was even a new tab in the GPRS bubble that you could click to disconnect the GPRS rather than holding down the red phone button. But alas, I still got the Cannot Connect for an unknown reason mesage. I'm going back to 1.06 (Thankfully I backed it up) It worked fine. Is anyone having this problem with the Anansky hacked ROM?
Also, why does the UK version come with Skype and the WWE version doesn't?
Could it be due to Activesync?
I too have the GPRS problem, usually it occurs after synchronizing with the PC. The flight mode trick fixes it. I can repeat this behavior and can always fix it, so it remains a nuisance...
Since you can access the internet through Activesync, maybe the OS stays locked in that mode and does not allow for GPRS to be a valid network connection...
Anybody else have similar symptoms?
Mashie, I use internet3.voicestream.com. As you said nothing seems to help.
chinadan, Yes! I had the exact same thing happen to me last night. I've been tinkering with my Jam for the last week trying to get it to work. Last night it was working fine, but then I connected it to my desktop to load PHM Registry and when I disconnected, GPRS started flaking out! Performing a soft reset didn't help.
I've been going back and forth with i-Mate CS, and it's obvious they know there's an issue. They seem to be getting a little testie since I'm basically telling them I'm not an idiot so please get the crap fixed! They had the nerve to send me instructions on how to setup a GPRS Connection on the Jam! :twisted: What nerve!
Anyway, think I'll try loading the worldwide 1.11WWE and see what happens. Anyone have a backup of 1.06 US 850 ROM?
Thanks and cheers!
Well, I went almost 24 hours without a GPRS problem on my JAM yesterday. I didn't get the usual "Cannot connect for an unknown reason" error message. This time I got a message saying that there was a problem with the modem???? I don't know where that one came from... changed my gprs setting to internet2.voicestream.com and it works now....until the next error message.
Screw it. I'm going back to 1.06. The JAM is VERY sluggish now and I can't even get it into flight mode to correct the problem. I guess I'll wait for the patch. (It seemslike we spend most of our time waiting for a patch or an update of some kind. ARGGGHH!)
ALso, I don't know if this was the case with the 1.06 ROM, but I used to have to hold down the red phone button for a few seconds to get the GPRS to disconnect. But with the 1.11UK rom all it takes is for you to click the red phone button and the connection is dropped. Example: If I'm on the Today Screen with GPRS connected, click the red phone button and voila, gprs is disconnected. Is this normal? I don't remember it disconnecting so easily with 1.06.
Also, saw this over on the HoFo: ___________________
New HTC Galaxy and Wizard to replace the Magician.
Got a hirizontal slide out keyboard. Same size as Magician. Black in colour. with 128mb ram, Wifi built in. Same size as Jam. With a 2.1mb camera (undecided maybe 1.2). Just saw the pictures, but it looks awesome. (I think it also had edge).
johnannie said:
Also, saw this over on the HoFo: ___________________
New HTC Galaxy and Wizard to replace the Magician.
Got a hirizontal slide out keyboard. Same size as Magician. Black in colour. with 128mb ram, Wifi built in. Same size as Jam. With a 2.1mb camera (undecided maybe 1.2). Just saw the pictures, but it looks awesome. (I think it also had edge).
Click to expand...
Click to collapse
Any chance you give us a link to those pics? Pleaseeeeeeee :twisted:
Ok, been tinkering around this evening concerning the GPRS connection issues and this is what I have thus far. First, Club IMate has new Operator Settings on their website. One of their techs was kind enough to e-mail it to me this afternoon and checking their website this evening shows T-Mobile ver1.6. Applied those settings and it seemed to do a better job at installing my VPN settings for internet3.voicestream.com. However, when I checked the Connections screen it listed My Isp with my VPN connection and My Work Network was setup for wap.voicestream.com. Ok, nice but I don't use the wap settings. Connecting through IE to wap.yahoo.com resulted in the TMo Wap connection to launch, but not my VPN connection. So I went back into Connection settings and set both Work and Internet to "My ISP". Upon doing this and selecting any website from IE, it wouldn't connect and give me the error "Make sure you have your modem installed blah, blah, blah". If I then press and held on the "G" and tapped connect, it connected just fine.
So that got me thinking about the Registry again and why in the Connection screen for both Internet and Private network, why there was no option for "The Internet", or "My Secure WAP" so forth and so on. When I had my XDA IIs, those where options. So I loaded PHM Registry to the device and went exploring. The first thing I found and deleted was in: \HKLM\Software\HTC\WModem. I deleted the Preset GPRS key. The next thing I found where all the Interent settings I just mentioned in:
\HKLM\Software\Microsoft\ConnMgr\Destinations\. There is listed "The Interent" (which I tried to create myself in Connections but it said it already existed) and My Secure Wap plus others that I had made. So for starters I deleted "The Internet" key and reset the device.
Went back into Connections and created a new network called The Internet and added my connection to internet3. I then switched it to only look at The Internet network. Launching IE again and trying to go to wap.yahoo.com. Again, I get the "Unable to Connect: Ensure that your modems are presentand inserted correctly, and no network card present".
So obvioulsy, my edits to the Registry made little difference. So again that got me thinking. Why would their be a WAP connection when I selected T-Mobile VPN during the new cab installation? Because it needs it!
I then went back into the Network Management screen under connections and left it set to The Internet for programs that auto connect to the internet and set it to My Work Network for the private network option. Since doing this I've had no issues when any connection while browsing. If I go to a WAP site it automatically connects to T-Mobile WAP connection. If I then decide to go to a full blown HTTP website, it automatically stops the WAP connection and launches the VPN one. There is no delay when it does this, well, maybe a second! :lol:
My thinking is (and, I'm no programmer or Registry master!) that the problem lies in the Registry settings for IE. Perhaps it runs deeper than that but if one of you Guru's could take a look perhaps we can get this ironed out once and for all. Thanks for listening!
Hi guys,
ive had my exec for about 2 weeks now. In the last week it has started to randomly loose network signal. It keeps searching till you either soft reset it or turn flight mode on and off. It will find a signal in about 10 seconds after that.
Is this there a 'dont keep loosing signal' setting that im missing?!
Mine does the same thing - annoying as hell! Not worked it out yet.
Are you talking about telephone or GPRS signal ( U or G )
Phone signal
everything! it looses all signal.
I called o2 and they want me to go into an 02 shop for them to have a look at it before they give me a replacement
The are all 'handset trained' apparently.
I also called o2 a week ago stating the same problem, They gave me a refferance number and said they will look into it, But of corse 1 week later they have not called me, So this afternoon i will find the referance number and give them a call.
I will post ther Bollox answer on here tonight
John
Same problem here with a MDA Pro. I ahve noticed that this happens when I am roaming in Germany as well. Very anoying. That and the thing freezing in a call and needing a re-set. This is my second one as the first one the screen portion became loose, happened on the one before as well.
I have the same problem althoughmine will refind the signal after about a minute. It seems to disappear whenever I ask thephoneto do something new (open a program etc).
I finally persauded T-Mobile to exchange mine so I'm getting a new one delivered tomorrow.
I'll let you know if that fixes it!
Andy
My XDA2 used to lose its ability to communicate if I was out of a signal area for more than 15 minutes, but I haven't had it happen yet with the Exec. A soft reset or Flight Mode on/off cycle would fix it.
It is frustrating but didn't happen often.
Well i phoned o2 and they said there was still no answer and that no one else had complainded about this, So i told them of this forum......
As per the last post i have also had this on a 2 and 2i, and i gree if its out of servie for a few mins its seems to give up looking for service until you reset.
mine has done it overnight befor, i looked befor going to bed and it had just the 3 dots flashing where the aerial should be. the next morning it was still the same, quick soft rest and into full service, thats when i first rang o2
John
I've had this on all my XDAs in the past, and seems to continue with the Exec.
Very annoying, but not sure what can be done about it.
Ant
guys,
wait for a rom upgrade from o2, ( with new radio rom)
that should solve the problem.
happens with xda, xda2, skipped xda2-i and xda2-s,
and now it's back.. :roll:
Hi Guys, I have been having this problem for weeks with my MDA Pro. I convinced myself it wasn't the phone and that it was T-Mobiles Network. In desperation last night I spoke to T-Mobile about the problem. They told me it was a faulty phone and that I would have to contact the supplier of the phone and ask them to replace it. I tried to explain others had the problem and that I wasn't happy to have to send my phone off and wait for a replacement. But no avail. So I sat down at home and looked at the settings. I think I might of cured it! Maybe it is a fluke but by clicking the signal meter and going to settings, then changing network selection to manual it has stopped hunting when it loses signal and quickly re-picks it up. HNope this helps others.
Giles.
abarthsmart said:
changing network selection to manual it has stopped hunting when it loses signal and quickly re-picks it up. HNope this helps others.
Giles.
Click to expand...
Click to collapse
Defenitely...that did it.
I had the same in Holland with KPN: while switched to manual no more problems.
In Romania however, where I also have UMTS, I had to switch it back (or it switched itselve back, after changing SIM card, I don't remember) to AUTO.
There it switches from GPRS to UMTS if UMTS signal is OK.
Huib
Ok, i have the same problem. Have GPRS Always on set in registry and 10 minutes ago, my MDA Pro lost GPRS connection. It trys to reconnect all the time. But no Connection can be build up. After Flight Mode and back, i get a connection immediately. But on start of MSN Messenger, it loses the connection again and does the same loop like before. Only a softreset brings my connection back to live.
Looks like a ROM issue. Maybe GSM or CE.
I am delighted to say that my replacement MDA Pro seems much more stable in the signal department. Although I still loose signal ocaasionally, I no beleive that is due to poor signal area and not the phone...
If you phone isloosing and reconnecting all the time then like mine it is probably faulty! Hopefully the ROM upgrades will sort out the last few issues I'm having!!
I love this phone!!
Same problem with JASJAR
People still have this problem? i'm using radio 1.03.01. When i used the original firmware, the phone part would lock up (Would get the busy - wait 15 seconds and try again, but it would never clear - had to soft reset)
With the 1.03.01 radio, i still get disconnected, but it'll find the signal again after a few retries - which is very bad! I rely on the phone at work, and people can't get through when it's disconnected. I have full signal strength (4 bars) so it's a software/hardware problem.
It looks like maybe it happens more frequently when charging or activesync'ing, than when it's disconnected from usb.
Can anyone confirm having the same problem, and it getting better or FIXED with the new radio firmware? If not, i'm going to have to return it.
Michael
I am using radio version 1.04.02 on the O2 exec, although i use a Vodafone SIM (supplied by work!). Mine suffers from the same problem, mainly at home, which is a very odd signal area for Vodafone. I can go from no signal to full signal to none again, and yes, sometimes it drops completely and needs a soft reset - bingo! full signal again.
Switching the network type from auto to GSM does seem to make the unit a little happier, but i need to use WCDMA when possible, so i leave mine on auto and live with the dropouts!
Lets hope the next rom fixes the problem.
Cheers
Paul
I have the same problem with my XDA and O2. a soft reset nor a full reset have been able to fix the problem. :roll: is the new rom version available as yet?
Guys here is my situation. I have a Cingular 8525 for some time now I noticed that it was dropping signal and then recovering it I thought it was a radio problem but I changed numerous radios and it didn't fix the issue. Last night I noticed that it wasn't picking up any signal, on turning it on I noticed that I had No GSM I tried the way in the Wiki but I am unable to flash using the radio 1.16 to it I unchecked Allow USB connections but for some reason I cannot flash the radio. I started the phone attempted to flash the phone with several other radios and it just hangs. On rebooting I see NO GSM but when my phone starts up I see it reads the network but I cannot do anything else no calls nothing. Is there another way to flash the radio to my device or is the radio just dead? If so I have another 8525 thats not working can the radio part of it be changed?
Regards
It seems your phone is toggling between 3G and the older GPRS. By default, the 8525 automatically selects 3G if it is available. If you move out of 3G range (considering 3G support nationwide isn't great yet), which will happen often, you will lose signal temporarily and either switch to GPRS or regain a 3G signal. Currently I default my phone to use GPRS just because i can't be bothered with having to deal with dropping signal/calls as often as i used to with the automatic setting. There is a free tool called BandSwitch which can accomplish this for you. The newer version (2.1) is not free but if you can get your hand on the older version which is, it'll work satisfactorily well. I hope this solves your problem.
I had the same problem and nothing worked for me.
Try different solutions posted my various users and see if anytihng works for you.
I think it is a hardware radio problem and probably the only solution is to change the motherboard.
If it is still under warranty - get it done. If not, you are out of luck.
Not sure if any of you guys here have faced this issue. But quiet often when I reboot my phone it starts up to the home screen and then doesn't connect to the wireless network, so basically i see the home screen and none of the buttons work, I remove the battery several times and suddenly it connects to the network.
Is this a known issue and is there a workaround?
I use the official windows mobile 6.1 rom released by HTC for the Sprint Mogul
I'm hearing two problems here:
1 - Your phone doesn't connect to the network. Have you tried to do a hard reset? That sounds like a software issue. Make sure you back up all of your cab files and contacts/mail/texts that you want to keep.
2 - Your buttons don't work. That sounds like a hardware issue and not necessarily related to the network issue. Have you brought it in to a Sprint store to see if they can repair or replace your phone?
i am also facing same problem, my mogul shows wifi on status but does not detects the wireless network, and after several on/off (through wifi on off hardware slider) it sometimes gets connected.
Please help
Its neither 1 or 2.
usually when you switch a sprint phone on you get a pop up saying "connecting to the sprint network dialing # 777" and after sometime, once the network connects then the phone is fully functional.
sometimes for my phone on rebooting it doesnt connect to the sprint network and as a result my phone remains unusable, in the sense the touch screen/buttons dont work. after several soft resets/battery removal it finally connects. I live in an area where there is good network connectivity!
rohan076 said:
Its neither 1 or 2.
usually when you switch a sprint phone on you get a pop up saying "connecting to the sprint network dialing # 777" and after sometime, once the network connects then the phone is fully functional.
sometimes for my phone on rebooting it doesnt connect to the sprint network and as a result my phone remains unusable, in the sense the touch screen/buttons dont work. after several soft resets/battery removal it finally connects. I live in an area where there is good network connectivity!
Click to expand...
Click to collapse
OK, thanks. That gives me a much clearer picture. I don't think this is a network problem. You most likely have something on your phone that causes it to freeze during start-up. Did you install something new or make a registry change just prior to this starting? Also, would you be willing to either reflash or hard reset your phone? A new flash with a re-cooked or different ROM will most likely help you out.
which recooked rom would you suggest. I use the default windows 6.1 rom released by sprint. and btw I removed phone alarm from my phone and it starts up fine now.
There are a few great options, and it's personal preference.
Ryan has made some very good ROMs available here on the upgrade forum.
DCD's last public version are still widely popular.
TPLane37 has made some neat WM 6.5 ROMs available
There's also some good stuff going on over at ppcgeeks.com using the most recent build of WM 6.5
You can also try cooking your own ROM using the tools at ppckitchen.org
Make sure you read up on how to flash before you try it. The process involves a number of steps that must be completed in the proper order.
I am only writing here after I tried everything I could possibly imagine with no result. Sorry the long text.
I'd like to hear ideas from you. Anyone with a similar problem.
I have a Blackstone, and never had even the smallest problem with GSM signal. But now I face the following:
- If I set the Band to "Auto", my phone connects to the HSPDA network with no problem, and I use internet and make calls normally.
- If I set the band to "GSM", sometimes it connect, sometimes not. When I manage to connect, if I try to use the internet, sometimes I lose the signal. When I am making a call, it frequently hangs up. The problem is random, sometimes I can use GSM with internet and calls for a long time, but suddenly it crashes again!
The solution would be always connect to HSPDA, but the problem is that on "Auto" the phone sometimes goes to GSM alone, and the signal breaks down.
I cannot be sure exactly when this problem began. But it was after I installed PDAVIET's Rom (WM 6.5 21053 and manila 2.5), and radio 1.17.25.09.
Among everything I have done:
- Flashed dozens of Roms always hard-reseting twice after. Tried stock Roms, cooked Roms with WM 6.1 / 6.5, manila 1.3 / 2.1 / 2.5.
- Flashed radios 1.13 / 1.14 and 1.17 in combination with all Roms. Tried with and without ripphone.dll's
- To eliminate a operator problem, I used my chip on a nokia for a few days, and didn'd have a single problem with signal, calls, internet. I installed a chip from another operator and faced the same problem.
Nothing I have done made any result.
Even using my stock Rom didn't solved. I used this phone for 8 months with no problem. So I came to the conclusion this is hardware related, with the antenna or something.
Thanks
All right, have been through a few more Roms and Radios and the problem remains unchanged...
Really looks like an antenna related problem. Apparently I will never connect to GSM again unless I take my device to service (have no guarantee), and be lucky!
But anyway, I found a solution to the connection instability and phone calls interruptions. Solved my life for now. It is very complicated:
*********************
HKLM\Software\OEM\UMTS
OpMode=2
*********************
This forces the phone to always stay in the 3G band. The "Auto" mode you can set in Comm Manager lets the phone change to GSM when the signal is low or whenever he wants, and my connection breaks down.
BTW, other modes are:
OpMode=0 (Auto mode)
OpMode=1 (GSM only mode)
OpMode=2 (3G only mode)
I know this may not be useful for anyone, but I just felt like sharing...