Database Users

Being a newb SUCKS!

Ok so.. I finally after months flashed my second rom
HAd some trouble, I have to admit..
DC~~
I had trouble and I did some wiping and messing with my SD chip and that was the only way I could functionally get a flash..
I just spent a day and a half setting my phone up to my liking and its become apparent apps2sd isn't working and my SD card only has one 1.5 partition out of 2 gb.
Sorry if there are posts with directions of how to work from this point to keep everything while enabling apps2sd and transfering
I dont know where to start searching.
Thanks guys.
"The noob"

get a app called dconfig, it has an option to move your apps so they're on the card.
other than that im not sure what youre asking.
it might be simpler just to flash your phone, format your card and start from scratch.

Cloned2 said:
Ok so.. I finally after months flashed my second rom
HAd some trouble, I have to admit..
DC~~
I had trouble and I did some wiping and messing with my SD chip and that was the only way I could functionally get a flash..
I just spent a day and a half setting my phone up to my liking and its become apparent apps2sd isn't working and my SD card only has one 1.5 partition out of 2 gb.
Sorry if there are posts with directions of how to work from this point to keep everything while enabling apps2sd and transfering
I dont know where to start searching.
Thanks guys.
"The noob"
Click to expand...
Click to collapse
do some searching on here, goggle & ppcgeeks for how to root, flash a recovery image, partition your sd card and flash a rom. just make sure the guide you are using and the rom you use is for a cdma based hero.
http://forum.ppcgeeks.com/showthread.php?t=90380 heres good guide to get you started.

I'm rooted I might just need to flash the Rom with the SD card.formatted correctly... I'm going to try to re find where the apps are stored and save them... id love to just be able to correct my SD config and set up apps2sd and move em over so I can keep my home screen set up as well as the info supplied in my apps and todo lists..
Thanks for the info ... on the road right now (passenger.seat )
Maybe I'm not a newb, I'm just stupid... I rooted using ubuntu karmic and I had apps2sd working before I moved to damage control
Sent from my HERO200 using Tapatalk

hmm.. Damage control rom comes with Dconfig and it has apps2sd enabled and move apps to sd checked.
Ok heres the thing..
I had a Modaco rom before and with apps2sd enabled and the SD formatted properly.
Plugging my phone into a computer would open up 2 drives... One 1 designated to be 1.5 gb and another .5 gb
How ever now I only see one.. the 1.5 gb
My memory is running low as if everything i've installed is in the phone.
searching through the phone i can't seem to find where these apps are being saved...
Are they on the elusive .5 gb partition I can't seem to see??
i think not... I just rebooted and my available space is 63.74mb
It's all becoming a no brainer that i should reflash the rom with the correct specifications to the SD chip...
But what I want to know, is there a way around this. ( I don't see any options, but I'd love to reformat my SD correctly and get apps2sd working on my own, moving all my apps over there while keeping any stored data intact...) <--- is this possible??
[maybe i should learn how to communicate clearly LOL]
For the moment, Ill back up my SD contents and hunt down how to partition correctly.. then I'll see if I can't find the folders where it is storing downloaded apps... then I'll disable then enable the apps2sd setting in dconfig and download an app... if all goes well i'll start pushing my apps over and do the whol "fix apk uid" in the recovery menu...
Hell maybe ill even decide to get a newer recovery besides 1.2.3 while im at it hahah.. any suggestions would be appreciated

# cd /data/app
# pwd
/system/sd/app
# cd /data/app-private
# pwd
/system/sd/app-private
Click to expand...
Click to collapse
So... Why is my memory so low???
I'm about to take my SD chip out and see if I cannot access the contents of these folders without it in...
MY APPS2SD IS WORKING AND HAS BEEN WORKING
Sorry guys... somethings just up[or rather DOWN] with my memory and my SD card reads differently...

Cloned2 said:
Being a newb SUCKS!
Click to expand...
Click to collapse
There's only one way to stop being a n00b: Learn.
You're doing fine. My suggestion is to not take it all on at once. Focus on one problem, fix it, learn from it and move on to the next one. You'll be a pro in no time.
I would guess that you need to repartition the SD card when moving from one ROM to the next, but I've never really played with apps2sd. See? You know more about it than I do!

download app: quick systems info
to see if your a2sd is working and how much is being used.
use the dconfig to make sure you have dalvik cached moved to sd... reboot the phone.
i am guessing at this....
you say you had a2sd working before with Madaco and could see 2 drives... that sounds wrong to me. if a2sd was working, then you should not see the 2nd drive. you are only able to see the main larger drive and that is it.. the others are used by android and not available to us.
now that you can not see the 2nd drive. sounds like a2sd is working. the app i suggested should confirm for you.

I did get everything working and my memory remains the same when I install applications.... perhaps I could see the second drive because I'm running Linux and/or the way I formatted the sd or the extension...
Sent from my HERO200 using Tapatalk

I think what you are describing is your SD-EXT partition (the a2sd partition you made). If you have a 2GB card and partitioned your card to be .5GB EXT, then it will appear your SD is 1.5GB. You get what I'm saying?

I used to be able to see 2 partitions as well. I think it was only with 1.5 ROMs.
If you want to mount both partitions then all you need to do is reboot into recovery and select the USB mount. Then both partitions will show up.
But you really don't need to mess with that second partition. Go to the market and download Titanium Backup. That will backup all your apps and settings. Restoring is a little annoying to do since you have to click for every app but if you buy the donate version then you don't have to do that.

centran said:
I used to be able to see 2 partitions as well. I think it was only with 1.5 ROMs.
If you want to mount both partitions then all you need to do is reboot into recovery and select the USB mount. Then both partitions will show up.
But you really don't need to mess with that second partition. Go to the market and download Titanium Backup. That will backup all your apps and settings. Restoring is a little annoying to do since you have to click for every app but if you buy the donate version then you don't have to do that.
Click to expand...
Click to collapse
I perfer Backup For Root Users... does the same thing but is free and is one-click one-shot deal.

partitioned sd and now phone wont reboot!

hi i think i made a crazy mistake... i just rooted my phone..used rom manager, flashed clockwork recovery.. went back into rom manager and did a backup for the stock shipped tmobile software... i decided to partition my sd card not even thinking that all my backup info would be on my SD card... i thought it would go to the internal memory... so now when the phone comes on, the bottom soft keys light up but the phone doesnt come on. please let me know if corrupted my phone or is there a way to fix?
please get back to me. this is scary

stepinmyworld said:
hi i think i made a crazy mistake... i just rooted my phone..used rom manager, flashed clockwork recovery.. went back into rom manager and did a backup for the stock shipped tmobile software... i decided to partition my sd card not even thinking that all my backup info would be on my SD card... i thought it would go to the internal memory... so now when the phone comes on, the bottom soft keys light up but the phone doesnt come on. please let me know if corrupted my phone or is there a way to fix?
please get back to me. this is scary
Click to expand...
Click to collapse
The black screen with lit up touch buttons is just the vibrants way of bootlooping. The problem with using clockwork to partition the SD card is /sdcard is the internal memory. /sdcard/sd is the card itself. Clockwork is actually formatting the internal memory. Might want remove the external sd and partition it back to 1 fat32 drive and see if that will help.

bahnburner said:
The black screen with lit up touch buttons is just the vibrants way of bootlooping. The problem with using clockwork to partition the SD card is /sdcard is the internal memory. /sdcard/sd is the card itself. Clockwork is actually formatting the internal memory. Might want remove the external sd and partition it back to 1 fat32 drive and see if that will help.
Click to expand...
Click to collapse
ok i am going to attempt to do this thank you

bahnburner said:
The black screen with lit up touch buttons is just the vibrants way of bootlooping. The problem with using clockwork to partition the SD card is /sdcard is the internal memory. /sdcard/sd is the card itself. Clockwork is actually formatting the internal memory. Might want remove the external sd and partition it back to 1 fat32 drive and see if that will help.
Click to expand...
Click to collapse
partitioning it back to fat32 didn't work. still just lit bottons and black screen after it has booted up. I think i erased eveything when i partitioned the sd card. i wonder has anyone else ran into this.

Just download jac's nandroid and put on sd card assuming you can still get into recovery..
Sent from my SGH-T959 using XDA App

bildo said:
Just download jac's nandroid and put on sd card assuming you can still get into recovery..
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I can get into recovery but the recovery doesn't access anything besides the internal memory. I can't access the internal memory if if i can't use usb... it doesn't access SD card so placing a file on the card wouldn't help me.

Clockwork does not even access the external sd. You partitioned your internal. You might be able to repartition it from adb if you connect after loading clockwork recovery.
Sent from my SGH-T959 using XDA App

kopykatkiller said:
Clockwork does not even access the external sd. You partitioned your internal. You might be able to repartition it from adb if you connect after loading clockwork recovery.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
nah.. i did chose clock work recovery,partition sd card 564 swap and 30mb i think... i am not sure.. but it did that... i tried to be reboot, it goes by the tmobile logo, then makes the tmobile noise as its on the samsung S part and then it goes to a black screen and lit up soft keys....
im guess stuck. i guess i can confirm this as bricked. ugh
i dont even know how to use adb.. it's difficult

Go into recovery and then use adb to connect and repartition.
Sent from my SGH-T959 using XDA App

kopykatkiller said:
Go into recovery and then use adb to connect and repartition.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
lol yall say this like it's that simple. i wish someone had a little time to direct me to a post on this because one word sentences wont help me. i appreciate the response though. my device isn't even found when i try to so it from adb.
it's ok... im frustrated and been doing this for about 3 hours trying to fix the phone. thanks again

Not that this is a real fix, but try going to T-mo and telling them you have no idea what happened and that it just won't turn on. With any luck you'll get a nice sales rep and they'll give you a new phone.
Sent from my SGH-T959 using XDA App

vinnydakid said:
Not that this is a real fix, but try going to T-mo and telling them you have no idea what happened and that it just won't turn on. With any luck you'll get a nice sales rep and they'll give you a new phone.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Why not just use odin and install a rom.

psychoace said:
Why not just use odin and install a rom.
Click to expand...
Click to collapse
because:
the only access i have is booting into recovery. I can't access the sd card to update it.. there is nothing on the phone. how does partitioning your sd card wipe both the phone and the sd? i backed up the rom via clockwork/rom manager so maybe it was all stored on the sd card and when i went to wipe, it wiped everything.

stepinmyworld said:
because:
the only access i have is booting into recovery. I can't access the sd card to update it.. there is nothing on the phone. how does partitioning your sd card wipe both the phone and the sd? i backed up the rom via clockwork/rom manager so maybe it was all stored on the sd card and when i went to wipe, it wiped everything.
Click to expand...
Click to collapse
Can't you access download mode? You don't need the sd card for that.

psychoace said:
Can't you access download mode? You don't need the sd card for that.
Click to expand...
Click to collapse
please let me know what to press

Installing a rom is not going to fix a repartitioned internal sd issue.

kopykatkiller said:
Installing a rom is not going to fix a repartitioned internal sd issue.
Click to expand...
Click to collapse
yeah i have to probably return the phone. i did download stock shipping software just to try it out maybe

If you have the USB drivers installed, You can use ADB to push files to the sdcard, although it won't be incredibly fast to push an entire nandroid backup over (you may need to mount /sdcard/ and push.

stepinmyworld said:
please let me know what to press
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=728698&highlight=odin
first post

First you need to install ADB. You can find the instructions in the top sticky post on the forum. Once it's installed, download http://www.mediafire.com/?kqaulorzx5f6dyq and unzip it into a folder in your adb folder. (ex: c:\androidtools\tools\) Keep track of the file names in the zip file. Open a command prompt in your adb directory and type "adb devices" to make sure your device is connected. I'm on my phone so I don't have my adb cheat sheet but I think you will type "adb mount /sdcard". Then you will want to push each file to the sdcard. You may be able to do the folder at once but I don't remember. That will be something link "adb push whateverfilename".
These are obviously not the best or most detailed instructions but I'm on my phone... You can read the adb tutorial to find what you are supposed to type exactly. You should be able to figure it out from here.

Getting Frustrated,Still cant Get Clockwork Mod Working

hey guys
i followed all the instructions, on the Clockwork Mod thread,ive even fully formated my sd card,getting really anoyed now,any help would be appretiated

TheiPhoneKiller said:
hey guys
i followed all the instructions, on the Clockwork Mod thread,ive even fully formated my sd card,getting really anoyed now,any help would be appretiated
Click to expand...
Click to collapse
Same here. Maybe its something to do with UK Hd2's.
I followed all the instructions too, and kept getting stuck in the boot screen loop.
Back to Nand for me... one thing, on screen before screen to flash zip it says can't find misc, even when I make a misc folder it makes no difference. Good luck to you anyway.

Garrylufc said:
Maybe its something to do with UK Hd2's.
Click to expand...
Click to collapse
Works fine for me, so it's not that.
TheiPhoneKiller said:
hey guys
i followed all the instructions, on the Clockwork Mod thread,ive even fully formated my sd card,getting really anoyed now,any help would be appretiated
Click to expand...
Click to collapse
Can you tell us what you're doing and what happens?

i Copy contents of copytosdroot folder to the root of my sd.then i boot into magldr and go into USB Flasher whilst still connected to my laptop,Run DAF,when thats done i again boot into magldr and tap Boot AD SD but it keep failing to go into Clockwork,i keep getting soming like k:Music/zimage not found or failed to load kernal even tho ive fully formated my sd,its really anoying,i cant try out any new roms exept nand,Really frustrating

I had problems running like this initially - what worked was putting the 'copytosd' files in a folder on the SD Card (I used 'ADSD'), then changing the Boot AD SD folder option in the Settings menu to that new folder ('ADSD').
Then try using 'Boot AD SD' option.
For some reason it did not like the root folder initially (though it now seems to work fine).

Use Panasonic SD Card formatter & re format the SD card & try again, I had the same issues but now its resolved..!!!

Uvaavu said:
I had problems running like this initially - what worked was putting the 'copytosd' files in a folder on the SD Card (I used 'ADSD'), then changing the Boot AD SD folder option in the Settings menu to that new folder ('ADSD').
Then try using 'Boot AD SD' option.
For some reason it did not like the root folder initially (though it now seems to work fine).
Click to expand...
Click to collapse
Guys,
Mine works as well so not a UK issue
Did you follow the instructions using DAF and indicated that it was successful but when you try to 1: boot from sd nothing happens or it flashes and returns to the MAGLDR screen?
I had an issue with the root folder as well, create a folder \recovery and copy the 2 root files intrid.gz and zimage to the \recovery and goto services and change the boot to folder to \recovery.
Important reboot before trying as MAGLDR does not change the folder until after a reboot.
Boot from SD and should be OK
Or at least was for me

Now Nand has came out it has inspired a lot to create their own Android builds and new chefs make mistakes. Not trying to blame chefs in general but some do make mistakes.
Also when we used to load up the builds from SD card, I would say 8 times out of 10 I would use a data.img which hasnt been used before. Now if you go from a Sense build to a non-Sense build, and you are using a data.img in app2sd, then they are not properly matched so a-b might go to a-c and miss b out if you know what I mean. What I do is use a data.img for Sense, another for Sense HD/Z, another one for Gingerbread and another for Miui and these are on my Desktop. When I load up a different builds like Sense to Miui, then I will move the data.img from .data or data2sd folder off the memory card and then overwrite the data.img I have on the Desktop for Sense and replace it for my Miui data.img.
I know it sounds tedious but I found it to help.
Also for the new App2SD+, I create the partition using ClockWorkMod instead of another application. I will use Partition Wizard for Windows to delete a partition and resize the fat32 partition back to the full use of the memory card but always partition and create EXT3 partition using ClockWorkMod.
Hope this helps.

waspsl said:
Guys,
Mine works as well so not a UK issue
Did you follow the instructions using DAF and indicated that it was successful but when you try to 1: boot from sd nothing happens or it flashes and returns to the MAGLDR screen?
I had an issue with the root folder as well, create a folder \recovery and copy the 2 root files intrid.gz and zimage to the \recovery and goto services and change the boot to folder to \recovery.
Important reboot before trying as MAGLDR does not change the folder until after a reboot.
Boot from SD and should be OK
Or at least was for me
Click to expand...
Click to collapse
i have a slightly different problem: I can boot into clockwork recovery after copying the copy-to-sd files and use it as a partitioning tool. But cant actually complete the installation as I keep getting errors when i run the DAF file from CWM folder in USB flasher option of MAGDLR, so cant actually use it for recovery !!!!

Can't Boot, Recover, CM FAIL. ModProbe chdir Failure. CWM Recovery Not Working.

I've worked ever so hard trying to configure and get the aesthetics of my cm7 rom up and running and apps in my testing might have triangulated and caused this error, I don't know.
Whenever I try to install a rom, boot into recovery, do a backup-- basically my clockwork is broken. Not broken, it still tries. It just pops this up on the screen:
Populating /dev using udev: done
Initializing random number generator....done
modprobe: chdir (2.6.32.9): No such file or directory
Starting network...
Detected Standard B&N nook layout, emmc first
It appears the SD card is already properly formatted
Skipping format
Mounting /dev/mmcblk1p1 as /boot
Looking for the install images....
Initial Install files not found
Please download it from nook.linuxhacker.ru
and put on first partition of this SD card
the name should start with updatei-cm and end with .zip
Click to expand...
Click to collapse
I'm using a recently nightly build of CM7.
I really love how I have it set-up, but if I don't have anyway to ever back it up my results are effortless.
How can I fix this situation without removal of the system. anyone, please?

First of all, have you done a nandroid backup in CWM? If so you can definitely recover.
Second it looks like your boot file is corrupted, always sending you to recover rather than a normal boot. What boot setup are you using?

echoedge said:
I've worked ever so hard trying to configure and get the aesthetics of my cm7 rom up and running and apps in my testing might have triangulated and caused this error, I don't know.
Whenever I try to install a rom, boot into recovery, do a backup-- basically my clockwork is broken. Not broken, it still tries. It just pops this up on the screen:
I'm using a recently nightly build of CM7.
I really love how I have it set-up, but if I don't have anyway to ever back it up my results are effortless.
How can I fix this situation without removal of the system. anyone, please?
Click to expand...
Click to collapse
You have installed your ROM to SD. There is no CWM recovery on SD installs. You cannot do a nandroid backup with the SD recovery.
See my post here for an explanation of the difference between emmc installs and SD installs:
http://forum.xda-developers.com/showthread.php?p=25354258
However, there is a way to back it up. Keep reading further down in my post.

thank you.
but how do i get access to uAltRam and uAltImg.
Multi SD Mount APP isn't working.
R/W permission difficulties in root explorer..
Using the 4202012 nightly build..
please help,
this shouldn't be too hard, don't let it drive me crazy

echoedge said:
thank you.
but how do i get access to uAltRam and uAltImg.
Multi SD Mount APP isn't working.
R/W permission difficulties in root explorer..
Using the 4202012 nightly build..
please help,
this shouldn't be too hard, don't let it drive me crazy
Click to expand...
Click to collapse
Take the card out and put in your PC. It will see the boot partition and you can copy the files there.

leapinlar said:
Take the card out and put in your PC. It will see the boot partition and you can copy the files there.
Click to expand...
Click to collapse
Hmm.. somehow I got it doing that. I of course tried that before and only the two partitions were loading. This time I was messing with it and clicking the multi sd mount widget and somehow the boot drive came up and I transferred the files on there.
So now I can do a nandroid backup as usual? Or sense it's an (Alt) instead of a recovery thing must it be different?
I'll try some things in the mean time..

Okay, so I have to boot into recovery and choose alternative and do it manually.
Can't do it with Rom Manager/Rom Tool Kit. Tried and it did the same error as in the OP.
Off to try now.
This is really strange though.
I've been messing with Nooks for a while and always used rom manager and the recovery console just fine.. but i've always ever done dual sd boots.This is my first time really doing a single one.
I'm in the boot menu (encore u-boot menu by j4mm3r), 1.2 port + extras.
It's been at
'Booting. One Moment'..." for at least a minute. Assuming it's frozen itself..
edit: Yeah, the Alt files didn't work.. I reset and pressed the N button, went to alternate and SD card. Nothing.
Reset it and it works as usual, but still no ability to backup..

echoedge said:
Okay, so I have to boot into recovery and choose alternative and do it manually.
Can't do it with Rom Manager/Rom Tool Kit. Tried and it did the same error as in the OP.
Off to try now.
This is really strange though.
I've been messing with Nooks for a while and always used rom manager and the recovery console just fine.. but i've always ever done dual sd boots.This is my first time really doing a single one.
I'm in the boot menu (encore u-boot menu by j4mm3r), 1.2 port + extras.
It's been at
'Booting. One Moment'..." for at least a minute. Assuming it's frozen itself..
Click to expand...
Click to collapse
Do not use ROM Manager with the verygreen SD installation. It does not work. Use the boot menu to boot into the alternate. Hold the n key while booting. Choose sd, alt.
Edit: you said two partitions showed up. Did you physically take the card out and insert into a card reader in your PC? It should see just one drive. Make sure those two files are there or it will hang when you choose it in the boot menu. I suspect you put the files on emmc boot since you used that strange program to do it.
Sent from my Nook Color running ICS and Tapatalk

No,
it's something with the multi mount sd app widget.
I hook mini usb to usb.
then hit the widget.
and JUST the boot partition comes up.
It says something about disk F: is not formatted correctly as well.
Just plugging it in without the multi mount app the outward sd card partition and the nook color come up, just those two.
And can't believe I didn't think to take the mini SD out and use an adapter. I'll try it again with that.

You're right I did mess something up with my EMMC.
Before I had it on a stock nook.
Now it goes to the cyanomod thing.
I took the miniSD card out, plugged it in for power and it turned on.
Went to that, had a bunch of force closed issues nothing worked, dry and empty, etc.
Any suggestions?
I'm gonna check out the miniSD card partitions now and try to get something going with that.

echoedge said:
You're right I did mess something up with my EMMC.
Before I had it on a stock nook.
Now it goes to the cyanomod thing.
I took the miniSD card out, plugged it in for power and it turned on.
Went to that, had a bunch of force closed issues nothing worked, dry and empty, etc.
Any suggestions?
I'm gonna check out the miniSD card partitions now and try to get something going with that.
Click to expand...
Click to collapse
There are many threads here that will tell you how to restore stock to emmc. Search for them.
But to get the SD working, do what I said. And I would suggest getting rid of that mount program so you don't mess it up again.
Edit: The problem with those mount programs is, if you mount the wrong partition, windows can only read fat partitions and will ask you to format. System and data are ext4 which windows cannot read.
Sent from my Nook Color running ICS and Tapatalk

Thanks a bunch.
In ubuntu once the sd card is inserted all 4 partititions automatically came up so I was able to copy and paste the Alt images.
Am backing up right now
And yeah getting the emmc back to stop np.
One thing i'm confused about.. you're saying one cannot update rom's if booting from an SD card?

also, i assume all in eed to do to make a back-up on my hard drive or usb (so its not just inclusive to the minisd), i can just root browser into mnt/sdcard/clockworkmod/backup and and create a zip of the 2012.5.5.etc.etc.etc. made folder and trnasfer it onto external device? If needed all I would need to do is a transfer back?

echoedge said:
One thing i'm confused about.. you're saying one cannot update rom's if booting from an SD card?
Click to expand...
Click to collapse
Yes you can update the ROM. Just not with CWM. You place the update-...zip in the boot partition of the SD and then using the boot menu (hold n during boot) select SD and recovery. The script in the boot partition will install the ROM for you. You need to read the first post in the agnostic image thread. It tells you all this.
On the second question, you can do it that way, but the files are already compressed there so just copy the folder to your PC to archive them.

is it okay to just boot into alternative (power + vol up/down) instead of going through the manual booting with the 'N' on start-up?

echoedge said:
is it okay to just boot into alternative (power + vol up/down) instead of going through the manual booting with the 'N' on start-up?
Click to expand...
Click to collapse
Yes. I didn't know you could do it that way. See, you taught me something. LOL. As long as you are getting into the 3.0.2.8 CWM recovery it's OK.
Sent from my NookColor using Tapatalk

[Q] LG Optimus L5, recovery and app2sd don't see the external SD

Hello World,
I've got a question concerning the external 8gb sdcard on my phone,
the phone is rooted, has bootloader and cwm 6, the rom is stock btw
My phone can put/place some things to the sd but some don't,
for example,
- Camera saves some of the pics to it,
- My PC sees it when I connect the phone and I can put apps/music etc to it
but,
- I can't use the app2sd built into android assistant (or any other app2sd apps) to move the apps to the sd, they just won't see the sd,
- CWM wont backup to it,
No /sdcard/.android_secure found. Skipping backup of applications on external storage
Click to expand...
Click to collapse
I've searched the forum, but I can't actually find the right solution for this?
I'm new to all of this, and I want to learn. I've found some advices to similar problems and that the solution is to partition the sd, is that the catch or maybe something else?
Thank you in advance, newbie.
Edit
A new example of not seeing the sd in recovery,
I wanted to flash the "Sony Album" via the Pimp my Rom app, it downloaded the app successfully, it asked for clearing of the dalvik cache, I approved it,
phone rebooted and went into recovery, and then the recovery said that the file doesnt exist (something like that).
Edit
I've tried formatting the sd with fat32, no changes whatsoever :S