No streaming without sync usb cable connected - Touch Diamond2, Pure General

Hi guys,
I tested on my D2 Coreplayer and Kinoma. For both, every thing was fine until I disconnected the usb cable from sync connector. Well ... running clearam and softreset several times were necessary for being able to launch again the players.
Also, after several tests, I noted that I was unable to get any streaming conncetion without sync usb cable or with earphone connector.
Where does this issue comes from ? Any idea ?
Thks

I'm a bit puzzled, are you saying the cable just has to be plugged in (but not actually connected to anything) or it has to be plugged in and connected to your PC in sync mode? You seem to imply that even plugging in the earpiece solves the problem?
Also, where are you trying to stream from (a PC on your local network, or the internet)?

Haha, you are funy guy Well ... of course is the cable pluget somewhere
Let's do it again ... the pocket was connected to the laptop in sync mode during I was installing and testing several streaming player for .pls files.
Everything worked fine and for any reason I decided to close my work. 3 sec after I pluged the cable from the pocket out, streaming stopped. This happened each time I was running this test. This happened with all players even wmp. Also ... with any cable connected to the laptop in sync mode i am unable to connect to those website for streaming. It looks like the laptop made the buffer ! I know ... amazing but it's the true !
Memory was a bit overloaded at 75% to 80%

thereisntone said:
Haha, you are funy guy Well ... of course is the cable pluget somewhere
Let's do it again ... the pocket was connected to the laptop in sync mode during I was installing and testing several streaming player for .pls files.
Everything worked fine and for any reason I decided to close my work. 3 sec after I pluged the cable from the pocket out, streaming stopped. This happened each time I was running this test. This happened with all players even wmp. Also ... with any cable connected to the laptop in sync mode i am unable to connect to those website for streaming. It looks like the laptop made the buffer ! I know ... amazing but it's the true !
Memory was a bit overloaded at 75% to 80%
Click to expand...
Click to collapse
Stupid question, but do you have setup an Internet connection on your Topaz?
If yes, is there a proxy setting? If yes, try without.
How does the streaming applications you tested connect to the streaming server? Can you setup the connection type in the options of the streaming application?

BeeGee_Tokyo said:
Stupid question, but do you have setup an Internet connection on your Topaz?
If yes, is there a proxy setting? If yes, try without.
How does the streaming applications you tested connect to the streaming server? Can you setup the connection type in the options of the streaming application?
Click to expand...
Click to collapse
Hi thanks for your help.
There is no stupide question in such cases ... Yes I have setup a internet connexion with proxy but thoses one from provider. And to late to remove proxy setup. I flashed again the rom.
But good question ... how does streaming applications connect to the net ? Thru the topaz ... and how does the topaz conect to the web ? Maybe thru the cable (data switch transfert was on) as it was supposed to connect thru HSPA/EDGE/GPRS ... Does topaz manage any priority in internet connection ? Need to improve this test .... later
however strange
Meanwhile I have to solve something else with the new rom ... erro 403 with Internt explorer (access denied) See here http://forum.xda-developers.com/showthread.php?t=546931 It nevers stops

Related

JasJar USB connection problem - please help

I 'suddenly' am unable to have my JasJar connected to Activesync. I have been successfully connecting the last two weeks and did not cahange anything to the PC's set-up.
I killed my antivirus and have no firewall software running.
I have a direct USB connection to my Laptop (no usb hub).
I have tried both Activesync V4.0 and V4.1.
I have deleted all partnerships to get a fresh start.
I have also tried to delete the PPC in the PC's device manager and connect again (I did notice the PPC was listed under the network adapters only, nothing was listed under the USB section).
Nothing seems to help and I am really desperate since I can not sync anything anymore now.
Any suggestions are more than welcome !
Thansk in advance,
Paul
have you tried another PC ? at least this way you can be sure that everything is ok .
I am travelling and will not have any access to another PC before the WE.... I did try another cable but got not lucky..
It does seem to work on another PC.
Anybody any suggestion as to what else I could try to make it work again?
firewall?, thats my pain on my work lappy, i have to vpn into work and that blocks my JJ, i get connecting but no connected, all i can do is disconnect from work which then opens the activesync ports back up. check 7438 and 5679 on your firewall
After a week with AS 4.0 I suddenly found that the only way I could get it to work was to soft reset the Jas Jar while connected. I'm guessing you've already tried that though...
yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason
Carnivor said:
yer, i forgot to say, i can only sync when my JJ has been off for 10+ seconds, if on i get a uab device error if off i connect no problems, this kinda leads me to think that the usb port is in a different mode when on to when on standby, but the usb hosting of devices appears not to be the reason
Click to expand...
Click to collapse
I have the same problem. Get a kind of "USB not recognized" when the jasjar is on/open".
I close the Jasjar after having taken the USB out of course.
Then, after a while ( You say 10 seconds) it works fine and Activesync starts the job.
I can live with it. No soft reset needed.
Very positive to me is the fact that I can also connect to a USB HUB. So no need to plu it directly in my portable.
After connection I can open my little toy. (Gush how I love this thing)
Huib
Yes I have the same problem I only synk when the jasjar is turned off. Most probably one of the reasons apart from firewall issus is office 2003. They said to me from club-imate support that we need the newest office 2003 with sp1.

Differences between a bluetooth Activesync conenction, &

When you connect the Wizard to a computer over BT, can you do all the same things that work over a USB connection? Like transfering files, syncing data, browse the internet through the computer?
kind of. You can browse the interent and such. However soem prgrams that connect to the PC, only work on cable. Remote AMP works on BT AS jsut fine. Howver I could not get Total Input to work over BT AS. I asked a question about this on this forums a while ago but I got no respons.
Later; Lew

Bluetooth internet on SP3????

Ok I just wanna ask,
I have an I-mate SP3 with WM5... Is it possible to go online by sharing your pc internet connection over bluetooth, has anyone tried it? I'm not sure... Oh yeah, maybe a good instruction to set it, might be helpfull, I'm getting confused over all the bluetooth internet posts, lol, read them all last night haha.
Thanks
BelgicanoFL said:
Ok I just wanna ask,
I have an I-mate SP3 with WM5... Is it possible to go online by sharing your pc internet connection over bluetooth, has anyone tried it? I'm not sure... Oh yeah, maybe a good instruction to set it, might be helpfull, I'm getting confused over all the bluetooth internet posts, lol, read them all last night haha.
Thanks
Click to expand...
Click to collapse
I have a QTEK 8010, the same device and I also can't go online over bluetooth.
I can browse the web using usb connection but disconnecting the cable and connecting bluetooth I can't neither browse the web or use activesync.
Dealer chenged my device with a new other but the prolem remains.
Can you use activesync via bluetooth?
I you can I think it is a good startin point.
Steve
I have a QTEK 8010, the same device and I also can't go online over bluetooth.
I can browse the web using usb connection but disconnecting the cable and connecting bluetooth I can't neither browse the web or use activesync.
Dealer chenged my device with a new other but the prolem remains.
Can you use activesync via bluetooth?
I you can I think it is a good startin point.
Steve[/quote]
I managed to get it AS over bluetooth, after installing WM5, and 1000 of times of trying, it showed up on my bluetooth, AS as service... but make sure ur comports are set to 6 and 7 as (incoming) and choose 6 in AS.. and it'll work Now i can surf like 100 meters outside my home hehe

Please help me get activesync to stop disconnecting

Ok, ive got activesync working fine on one of my pcs but on the other it disconnects after about 3 mins. both have identical software antivirus/firewall-wise the only difference is one has a hardware modem/wireless router(the non-working one) and the other uses a wireless usb hub to connect to the internet.
Ive tried pulling the ethernet cable from the back of the non-working pc to no avail, disabling windows firewall etc but nothing stops it disconnecting after about 3-4 minutes.
Ive tried all the suggestions regarding tcp/ip, they were already correct as were the dhcp ones.
im completely baffled by this
the wmstorage program works for a bit longer but gives the error "the device is unavailable due to an i/o error" after about 5 minutes
anyone have a clue why this is happening?
Odd question to ask. Is your unit set to switch off after 3 mins? Just check if the device is on/off (you can have the backlight off, but you should able to see something on the screen) when the activesync disconnect.
on battery power its set to 2 mins but on external (usb?) its unticked. it works ok on the other pc though thats the thing so i assume its a pc settings issue :wink:
As you plugged into the PC directly (not through a USB Hub)? USB hubs have been known to cause problems.
im using a usb extension cable straight into the usb 2.0 card , the only other device is a printer and the keyboard which share a usb hub on another port.
The cable works fine with other devices ie digital camera/camcorder so its not a faulty cable.
Im using a hub on the pc that works (and its only usb1.1) and it shares with the wireless dongle
One thing i did used to get while transferring data was the avg email scanner popping up while my ipaq (which worked fine) was connected. i disabled the email scanner to see if it helped and rebooted but it was no different
ok-think ive fixed it-the (brand new) usb cable must have been faulty cos i connected the mda cable straight into the pc and it worked :roll:
thanks for all your help :wink:

Wifi Streaming - Strange Problem

Wifi Streaming - Strange Problem
I am hoping someone may have come across the same problem as me because I have searched this forum and have not seen anything like this.
I have been trying to access my Music stored on my main PC via the wireless router which is connected to it (Netgear DG834G V3). I am using Pocket Player 3.5 with the new upnp plugin. I am trying to connect my HTC Touch which can connect to the internet via the wifi router no problem and I can also look at shared folders in Pocket player through adding a network folder address. I can play files this way also but the directory structure of my hard disk is long winded and I just wanted to browse the traditional way by artist/album etc..
I have found that Windows Media Player 11 does not recognize the Touch as a Upnp device and when I try and Network share on pocket player nothing happens. I have also tried Resco Explorer and it cannot map the drives also.
Something I found strange though is that I also have a laptop which is also connected to my Wireless router and when I opened WMP11 on the laptop it shared the files on the Touch. I looked at all the Network/Firewall settings etc.. on both the main PC and the laptop and they were almost identical so I cannot understand why my main PC isn't allowing the connection. The only difference is that my PC is wired to the Netgear and the Laptop is connecting through wifi.
If I actually plug the Touch directly into my main PC via the USB cable and close down Active Sync the Touch can suddenly read the WMP11 content on the main PC (although it gives the Touch a different MAC Code) however it will loose it as soon as I disconnect the cable.
Can anyone help! Am I missing something really obvious?

Categories

Resources